PM Order Operations Default Unit of Measurement

Halo Experts,
We have a problem in UOM for PM/CS order operations. We have defined HR as default value of UOM for operations in IMG.
Business wants to change at the order level to H as UOM and it is manually keyed in and saved. But when we check with the F4 option for Unit of Measure " H" doesnt appear where as HR appears.
Any restrictions in displaying all the unit of measures. Can anybody clarify why "H" is not appearing on F4 option in the work order operation line items.
Regards,
Selva

Hi Rajesh,
We are getting the default unit in operation tab and all the config of default values is available but when we execute the F4 option the unit "H" is not appearing where as if we change from HR which is a default unit to H it is getting saved at the operation Tab.
Hope it is clear now.
Regards,
Selva

Similar Messages

  • Bus. Entity - Default Unit of Measurement per Company Code

    Experts, I have assigned the default units of measure in "Make Basic Settings in Company Code" config. Surprisingly these entries don't show up in "Default Unit of Measurement per Company Code" config under Business Enity. Also, I cannot add those entries.
    Please treat this as urgent!
    Thank you.

    Hi,
    Goto RealEstate (not RE-FX, though you are using RE-FX) \ Basic settings \ Basic Setting for Company codes / Financial asset management, select checkbox of Fin Asset Mangmt for your company code.
    Now you can see this company code in company code level settings for company code in business entity level.
    Really i dont know why we have to check that checkbox of Asset management to allow at business entity level, but we have to.
    regards,
    Srini

  • Default Unit of Measurement per Company Code

    Dear Gurus,
    I'm trying to specify Default Unit of Measurement per Company Code into RE customizing but I can't make new entries or modify existing into change view.
    How can i solve my requirement?
    Than you in advance,
    Fuffo

    Hello Ute,
    we made all basic settings:
    -activate RE-FX
    -make settings in company code
    -activate RE manaagement in controlling area
    Into company code settings we mainteined DEFAULT UNIT OF MEASURE but into S_ALN_01001235 we can't find related entries.
    Any suggestion?
    Thank you in advance,
    Fuffo

  • Default units of measure FM10

    can the default units of measure be set so they always read in mm instead of inches, rather than having to switch every time I open a document? I am beginning to find this really irritating.
    Using FrameMaker 10, windows 7, 64 bit system

    Check your maker.ini files for a setting - I can't tell you which one, but I'm pretty sure it exists in there somewhere

  • Use Metric as the default Unit of Measurements?

    Hi I am using the trial version of Live Cycle Designer ES 8.2 and I was wondering if there is a way to set metric as the default unit for Measurement?
    Regards
    Denis

    Hi,
    Double click on the ruler. Then you can select the unit, like cm or mm instead of inches.

  • Default Unit of Measure in Shopping Cart

    Hello Experts,
    I am implementing SRM 7.0 Extended classic Scenario with SAP ECC6.0.
    When creating a Shopping Cart for Free Text items, in Employee Self-Service of via the Professional SC, the user systematically has to select the Unit of measure he wants to use (unless he has defined his own defautl value with right click > Set current value as default).
    Is there a way in the system to define a default ordering Unit of Measure for the Shopping Cart for every user ?
    I searched the organization attributes (PPOMA_BBP), the user parameters (SU01), but I could not find a way.
    Thanks in advance,
    Sofiane

    Unlike currency, which is usually fairly static for a company/user/system, unit of measure usually varies from one document to another, if not one item to another frequently. Therefore there is no per user default for this field by standard. However, you could enhancement the relevant webdynpro view, e.g. /SAPSRM/WDC_DODC_SC_I_BD, (method WDDOINIT) to default the unit of measure that way on the UI.

  • In RG1 ,Unit of measurement is KG,User want to change as MR

    Hi Experts,
    In RG1,user want to change unit of measurement as KG to MR.Now its showing KG but in billing there is unit of measurement is MR .I have checked material master.I found following:
    base unit of measurement is KG
    sales Unit: SM
    while creating order system default unit of measurement showing SM.In Additional data there are some conversion factors.
    Please help me gurus
    how can i covert KG to MR in RG1? as in billing it is MR.
    Thanks & Regards,
    Ravindra

    Hi Ram,
    Thanks for the reply.
    Problem coming in RG1 as UOM comming  KG.user already billed in MR as there is conversion factor in material master MR to KG.
    According to your suggetion if i changed sales unit as MR it comes defaulted in order then in invoice.but in RG1 still it showing KG as UOM.
    Can you explain about RG1? In RG1 may be system catch only base unit of measurement which is KG.
    Thanks & Regards,
    Ravindra

  • Automatically pick material master unit of measure conversion to routing

    I maintain finish goods conversion factor in material master u201CAdditional Data: Unit of measureu201D as M to KG and basic unit of measure for finish good in material master is in KG.
    I attached multiple operations for the finish goods material in routing.
    Some operations base unit of measure is M and others its KG.
    I want to pick material master unit of measure conversion automatically when Iu2019m creating routing for the finish good material in ca01. (Unit of measure conversion for header and operation of the operation)
    Can anyone letme know the SAP configuration for this.

    Hi!,
    Please expalin about the purpose of this requirement, because when you will create a order using that routing, at that time system will definately do the unit conversion automatically.
    Regards,
    Uday

  • Getting an error in CIF Inbound queue:"Only 0 decimal places are permitted for unit of measure PC"

    Hi,
    I am getting an error in CIF Inbound queue (function: CIF_ORDER_INBOUND_30A). The error text says "Only 0 decimal places are permitted for unit of measure PC".
    Can anyone point out the solution to resolve this error? It would be a big help for me as I am new to APO and so getting difficult to find a clue for it.
    Thanks.
    Regards
    Mansi

    Hi Mansi,
    Please check the cif queue you will get the order number from that order number you can find out material code. Then check the material master unit of measure in MM03 you have used some alternative unit of measure and system is unable to convert order to  alternative unit of measure because of decimal setting. If you go to CUNI and check the unit if measure PC it is not permitted for decimal places. If you need decimal than change the UoMof Material and use diff UoM or allow the decimal for PC which is not good practice.
    Regards,
    R.Brahmankar

  • I live in the UK : How do I change the unit of measurement from inches to metric in iPhoto

    I live in the UK : How do i change the default unit of measurement from inches to metric?

    Terence
    Thanks for your answer to my question. I have tried what you suggested and 'metric' was already set as the default so unfortunately, it has not solved my problem which is when I set the dimensions for the print size before printing, I have to change from 'inches' to 'cms' for each photo every time. I was hoping that I would be able to set 'cms' as the default.
    Hope you can help me.

  • GR IN ALTERNATIVE UNIT OF MEASURE

    Dear Friends,
    I want to know report for GR of production order in alternative unit of measure for a specific day.
    Plz help me
    Thanks
    KK

    Hi,
    There is ni standard report in SAP for this.
    As for the GR, this cannot be changed, you can disply stock in L or EA in many reports and transactions (MMBE and the physical inventory transactions can all be in either UOM for instance) but the main UOM for stock is the UOM defined on the issuing UOM on the plant / storage view of the material master. Or use MB51with movement type.
    Or try report 'SAPMUNIT' from SE38
    Regards,
    R.Brahmankar

  • Upto 4 decimal point for unit of measure

    hi,
    We have requirement to maintain upto 4 decimal point in PO and sales order quantity for unit of measure M3. Example PO quanity 0.3902 m3, sales order quantity 2.3212 m3,   SAP allow upto 3 decimal point, how to handle this 4 decimal point for unit of measure and any impact to do so ?
    best rgds,

    Dear Eric,
    To change decimal places of Materials follow this:
    IMG - SAP NetWeaver - General Settings - Check Units of Measurement
    select Units of Measurement & select required Unit of Measure & set decimal places.
    Hope this helps...
    Give points if useful...
    Thanks,
    Jignesh Mehta

  • Alternate unit of measure for service master

    Dear all
    I have same service but different unit of measure like hr, day, month, pls explain how make alternative unit of measure in service master?

    Hello,
    I am afraid I must confirm that the system is working in this way...                                                               
    It is not possible to define an alternative unit of measure in the service master in R/3.                                                    
    If you want to create a purchase order with another unit of measure, you have to create a seperate service master with this unit of measure.   
    Thanx & Sorry
    Mauro

  • How to make system consider Alternative unit of measure while creating BOM?

    Dear Experts,
    When creating a BOM, how do I make the system consider the alternative unit of measure if at the point of creating the BOM, I decide to use  the  component material  alternative unit of measure? The scenario is as follows:
    Header
    Material code is TK677, Base Unit of Measure is Litres.
    Components:
    Material code is RT677, Base Unit of measure is Litres.
    Material code is RV677, Base Unit of measure is Kilogram.
    When formulation is done in the laboratory, the components are weighed and measured in percentage weight. For example, 20% for first component (RT677)  and 80% (RV677) for the second component.
    To depict this, I maintain an alternative unit of measure of Kg  in the Material Master of RT677, and maintain the conversion factor (100kg = 116Litres) so as to enable me use Kg as unit of measure for material RT677 when creating the BOM.
    When creating the BOM, I enter Kg as unit of measure for material RT677, but gets the system error message ''Unit of measure KG not supported for material RT677 in plant NG00
    Message no. 29175''
    What do i need to do as I have already maintained Kg as alternative unit of measure? or which other better way should i handle this issue?

    Thanks a lot for your reply, it worked, it allowed me to create the BOM using Kg for component RT677. But the new challenge i am now facing is that when I try to create a process order copyiing this BOM, it gives me the same unit (Kg) for component RT677 whose base unit of measure is Litres.
    I actually want the process order to copy the BOM and use Litres  for component RT677 based on the conversion factor which I have maintained in the Additional Data window of the material master.
    The reason is that, the formulation done in the lab is measured in percentage weight, but this component weight is now scaled up to Litres when the component is pumped into the Blending Vessels as specified in their Blending Instruction.
    Please how do I ensure that when the master recipe is copied during creation of the Process Order, that the unit of measure will be the base unit of measure (Litres) despite the fact that I have used the alternative unit of measure (Kg) for this component during creation of the BOM.  
    Thanks

  • Unit of Measurement - MB31 Goods receipt for order

    Hi,
    we maintained production unit (MARC-FRTME) for some materials. Now the goods receipt for order with MB31 suggests this production unit (MSEG-ERFME). The customer's requirement is that MB31 suggests the quantity in base unit of measure (MARA-MEINS). The quantity should be the entered value in the confirmation of the last operation.
    I implemented BADI WORKORDER_GOODSMVT (IF_EX_WORKORDER_GOODSMVT~MANUAL_GOODS_RECEIPT) to convert the quantity from production unit to base unit of measure. The stock is increased correctly but the Purchase Order Unit of Measure (MSEG-BSTME) is in base unit and not in production unit. If the material document is displayed with MIGO the quantity ordered (Tab Quantity) is wrong. The quantity is the production quantity and the unit is the base unit.
    For example:
    MARA-MEINS:   PC
    MARC-FRTME:  XY
    1 XY <=> 12 PC
    Production order: 13 XY (=156 PC)
    MB31 with 100 PC
    MIGO: Quantity orderd: 13 PC (instead of XY)
    Does anyone have an idea how this problem can be solved?
    Thanks!
    Best regards
    Martin

    You can attend this issue by activating batch classification. Extend the classifcation view and maintain batch classification for the Unit of measurement of the material.
    Chris

Maybe you are looking for