PM Order reference object

hi,
My requirment is that i have changed the WBS element of all the equipments. Noq these equipments are used in some orders. I also want that the new WBS elemment also get updated in the order. One option is that i open each order and do the reference object data update. But that is a lengthy process. Is there any kind of mass maintenance in which i put all the order numbers and all the master data for refernece object get updated.
otherwise i have to make a BDC or LSMW>

Of course you can
Go to IW38, select all the orders where you want to update your reference object - eqpt in your case
Once you get the list, select all the orders
Click on your screen menu "Order -> Carry out Mass Change" Ctrl + F11
On the Popup, choose field you want to replace (use F5 to select the field for change)
Here you can follow two step
First time you remove all the Equipments -
Check Replace only - Enter the Eqpt Id
New Value with blank and then Execute
Second time, you give the new value with the equipment id you need & execute again
Suggest, you can keep the list of workorders handy as on the first run, (if you had selected on the basis of Equipment, you will be pushed to the IW38 selection screen)
Also try first using the test run

Similar Messages

  • CRM Order Reference Objects List

    Hello SAP Experts,
    We are trying to extract the CRM Orders list of Reference Objects.
    With Datasource 0CRM_SRV_PROCESS_H we can only extract the Main Reference Object .
    Also, we can get this list with function crm_order_read, by selecting table ET_REFOBJ.
    But is there a DataSource that extracts this information to BW?
    Thanks

    Hi,
      You should be able to get the same from table OBJK. Use the OBKNR field value for the order number from table AFIH in table OBJK.
       Use the ILOAN number obtained from table OBJK  in table IFLOT for obtaining  the Functional Location key associated to the object list entry. The functional location text can be obtained from table IFLOTX.
    Regards
    Narasimhan

  • Reference object changed in order

    All,
    Few orders have been changed with the reference object in the header level in the course of order processing, which has led to inconsistency in the data between the object at the time when the order was created and in due course of processing with new object ( Location and account assignment data (Default values)).
    There is a need that whenever in due course of processing when the order reference object  is changed, the default value in location and account assignment data in order should be updated..
    How can we achieve this...

    We did this via a user-exit at SAVE (IWO10009) which popped up a message telling the user that there was a difference in Location data.
    PeteA

  • Inserting Object link as reference object in Maint Order/Notification

    Dear all,
    I've mapped pipe line using obejct link,now when i create Maint Order or Notification system displays below mentioned message,
    Select a link object as reference object
    Message no. IH101
    Diagnosis
    You are trying to create an order or a notification for a link object, but have not yet selected an object.
    Procedure
    Place the cursor on a link object. This object will be entered in the notification or order as the object referred to.
    In std Screen RefObject thers is no ref object for Link,
    Please guide me how we can create Maint.Order/Notification against Object Link,as it is required to track cost as well as history of repairs in pipe line.
    Thanks in advance
    Regards
    Parshil
    Edited by: PM_in_SAP on Jul 27, 2010 9:19 AM

    Hi,
    i refer page no 18 of SAP book Object Networking (CS-BD/PM-EQM-ON) SAP AG Release 4.6C,
    To select a particular link from the list, (IN18)select the object link and choose one of the following options:
    Goto --> Change/Display --> link, You reach the object link data screen.
    Goto -->Create notification  --> Notification type
    You reach the screen where you can create a maintenance notification for the link. If a link object is entered for the selected link, the system automatically uses it as a reference object for the notification.
    Goto --> Create order
    You reach the screen where you can create a maintenance order for the link. If a link the system automatically uses it as a
    reference object for the order.
    Regards
    Parshil
    Edited by: PM_in_SAP on Jul 27, 2010 11:22 AM

  • Reference object data update in Location tab page of order

    Hello
    When a  reference object in notification/order is changed, the location and account assignment data is  updated in order location data by standard settings in SAP but any changes to the master data of the existing reference object is not changed in Notification/Order location tab page.
    But there is an option that  when you change the data in the technical object and you need the same to be reflected in order location data for which this order has the reference object, we can use the functionality of clicking the right mouse in object list and so the data will be updated in notification/order.
    Please explain how to carry out this step "of clicking the right mouse in object list and so the data will be updated in notification/order"..
    I have changed the Location data/Account assignment data of techincal object in its master data and now i want that to reflect in Work order.
    How to achieve this??

    Hi,
    Keep the cursor in Equipment field & right click the mouse. You can find the option Update Reference Object Data.
    Select that option, you will get updated details in the Notification / order.
    Regards,
    Maheswaran.

  • Reference Object Screen For Vehicle in Maintenance Order

    SAP Gurus,
    How could I display the reference object screen for vehicle specific data (O150) in my Maintenance Order. I have been able to display it in Maintenance Notification but how could the fields plate number etc defined in reference object screen for Fleet objects be displayed in Order.
    Regards,
    Muhammad Usman Kahoot

    Muhammad Usman Kahoot,
      When you create the Order from the notification, there shouldn't be a problem with the reference object screen, you should be able to see the Fleet object reference field, even if the screen reference object type for the order type is set to blank in config.
    If you are creating a order directly using transaction IW31,Make sure to assign the Equipment only reference object screen (0150) to the order type using transaction OIOA.This will bring in the fleet reference object field defined as well.
    Regards
    Narasimhan

  • Order Types - screen reference object

    Dear PM guys,
    In Functions and Settings for Order types-In Configure Order type screen,If I give O120(Functional location(30)equipmentassbly) or O180(Functional loc. 1:1 + equip. + assembly) for the field Screen RefObject, Its makes no difference in flow.Then what is the significance of that field.
    Regards
    ISWARI

    When you assign the  120 then the reference object Screen changes in the order and the Functional Location field is 30 Characters Long

  • Reference object in Notification and Order

    Hi ,
    I have a requirement to capture following in the reference Object for notification and  Order
    1. Functional Location
    2. Equipment
    3. Material
    4. Serial Number
    Configuration setting for overview of notification type doesn't have  the option to capture all the above fields.
    I am able to get all fields except Functional Location...
    Please guide me
    Regards
    Anil Kumar

    Anil,
    I have just been looking at this same requirement.
    Unfortunately you can only use the standard options for reference objects which does not allow for your requirement.
    There are no user-exits/BADIs either, you would need to build a new screen and screen-logic which is a system modification.
    The best I could do within the standard system is to include these fields on the Enhancement tab (user-exit IWO10018) or build a bespoke front-end via ABAP or HTML. GUIXT is another option.
    PeteA

  • Do not allow change of Reference Object after Order release

    Dear All,
    The requirement is that we should lock(not able to change) the Reference Object after the Maintenance Order is released. Can we acheive this in standard way or do we need to go for development.
    If going for development what should be the basic logic.
    Regards,
    MLN Prasad

    Prasad,
      You are accomplishing the same utilizing the built in enhancement framework([Implicit enhancements|http://help.sap.com/saphelp_nw70/helpdata/en/70/63da4023a28631e10000000a1550b0/frameset.htm]), WITHOUT making a MODIFICATION to the system. This technology / functionality is available from ECC 6.0 . You would need to be very careful in using the implicit enhancement functionality so that you don't break the flow. Your requirement seems to be a simple one which could be accomplished by tweaking the screen attributes of the field under certain conditions, for this specific screen in the program. You may also have to make the Priority field a display only, so that it doesn't trigger a change through it via the user exit or through standard.
    Regards
    Narasimhan

  • Reference Object to Refresh Work Order Field Data

    Dear Gurus,
    In IW21/IW22 the reference object will populate the Responsibilities section of the Notification tab, and fields on the Location Data tab.  When the reference object is changed, those same fields will update or refresh.  The reference object will also populate field data in a work order if the work order is created from the notification, however, work order fields will not refresh if the reference object on the notification is changed.  Nor will work order fields change if the reference object is changed directly within the work order.
    Can anyone explain why fields will refresh in IW21/IW22 when the reference object is changed, but similar fields in the work order will not refresh when the reference object is changed in IW31/IW32?

    Hi Lisa,
    When you execute IW31/IW32 transaction, in back ground standard SAP programs are called to perform order related task.
    When transaction IW21 / IW22 is executed and order is created or changed at that point also standard SAP programs are called to perform order related task.
    But program called by IW31/IW32 are different then that will called with IW21/IW22 and thus refresh dont happen if u change reference object in notification once after order is created.
    You need to manually change in work order.

  • Sales order cost objective vs OKB9  Internal order cost object.

    Hi All,
    we facing an  issue with sales order cost objective vs OKB9 cost object.
    For IC PO service material, we assigned account assignment category 4.Reasonis Service material was not showing on G\R account.
    The G\L account 7898788, we assigned to Service Item (material type DIEN)  , for G\Cost 7898788 cost element is assigned in OKB9. Combination business + order 3478787.
    Now conflict with sales order cost objective vs OKB9  internal order cost object.
    While posting intercompany IR posting system thronging below error messageu2026
    Enter only one true account assignment
    Message no. KI249
    Diagnosis
    You made assignments to several objects in CO (cost center, order, project etc.). 2 of these have been created as true objects.
    System Response
    You are allowed only one account assignment for each cost-relevant account
    How to resolve this issue.. Do I make any config changes in the system to overcome this issue?
    Or any sub account to assin in VKOA config for internal orderu2026
    Regards,
    Adi

    Hi Waman,
    Thanks for your inputs.
    Issue :  IR failed to post for wax  Sales Order -> ICPO  - Error:  Enter only one true account assignmentu2019.
    Background:
    Original setup  in  Test system   & Productionu2013 account determination for servive (DIEN) account assignment category u20184u2019 was linked to G/L Account  34444444, As part of project orange u2019, account determination was linked to account u201889710100u2019.
    Account u20188970100u2019   34444444 was replaced with 8970100 ,is not linked to any cost center & always post with reference to IC Sales Order as per config in OKB9 based on company code (US99) + cost element (89701100) + business area (9yyy). This caused a conflict while posting IR, system could not determine exact order for posting financial value.
    Conflict:  Actual Sales Order 34789343 is  linked to PO via account assignment category & IC dummy sales order (8014331) is determine via config setting. Two cost objects cannot be linked to one IR G/L account booking.
    Regards,
    Adi

  • Issue in Outbound Delivery Creation w/o order reference & w/o sale order

    Hi ,
    I have an issue in outbound delivery creation without order reference and without sale order through
    BAPI_OUTB_DELIVERY_CREATENOREF . I am getting an error like
    1. Copying is not poss.because an entry is missing in Table TVCPL:  ZLR (Checked entries are there in the Table TVCPL)
    2. No instance of object type OutboundDelivery has been created. External reference.
    But I can able to create an outbound delivery through VL01NO txn.
    Pls help me where I am gng wrong.
    Regards
    Rupachandran

    hi,
    this is to inform you that,
    1. Copying is not poss.because an entry is missing in Table TVCPL: ZLR (Checked entries are there in the Table TVCPL)
    1.a. sorry for sending the link
    Re: can't create DN for sales return order
    balajia
    Edited by: balaji timmampalli achari on Dec 9, 2010 3:15 PM

  • Quality notification - more reference objects

    Hello,
    business need is to have quality notification with possibility to refer either production order or purchase order under one notification type.
    By standard this seems not possible as:
    Complaint Against Vendor references to Purchase order
    Internal Problem Report references to Production order.
    But in section "User-specific notification" is mentioned
    A user-specific notification type has the same basic structure as the standard, predefined notification types. The screen layouts, reference objects, and tab indexes, however, may differ from those in the predefined notification types, depending on how you customize the user-specific notification type.
    But I have not found a way in customizing to enable this.
    Advice appreciated.
    Br, Jan

    Thanks for the asnwer, but I think this does not solve my problem.
    In the configuaration for "Notification Header and Screen Areas" I do have
    - notification header screen H500
    - customized screen O550 (BADI)
    and both are needed.
    The BADI is used to customize refernce object screen, not reference documents screen. But my idea was to change reference document screen area in a way, that both purhcasing and production reference documents are visible in there.
    I only managed to get the vendor screen by adding screen area 037 to "Extended View: Tabstrips and Screen Areas" But adding purhcase document as reference to Reference documents remains my problem.
    I am kind of able to make the vendor screen visible by e.g. adding screen area 037 Partner overview screen (table control).But creating a new pop-up window for notification reference, where both options (pur ord, prod ord) would be available with copying functionality - in my opinion this requiers completely custom coding.

  • What is use of Reference object in BW

    Hi All,
    I have a small doubt about use of Reference object.Since reference object uses same database table of referenced object and also we can not load data in this.Only loaded data in Referenced object will be available in newly created reference object.
    Also if we create more than 2 objects referencing the same object and used them in InfoProvider then what is use of these objects in that infoprovider whether they have same data and also all properties.
    For example if we have created two objects u2018Sender Cost Centeru2019 and u2018Receiver Cost centeru2019 referencing the same object u2018Cost Centeru2019 and used them in an InfoCube.
    Then what is use of these objects whethet they are refering same database table of u2018Cost Centeru2019.And how we can differentiate them during Reporting.
    Regards
    Vinay

    consider below table:
    cost center (master data table):
    Cost SID, Center name, Other details
    1 ..., xyz....., bla bla
    2 ..., abc....., bla bla
    Purchase Order Header Table (transcation table)
    PONumber, Sender CostCntr, RecevierCostCntr, Other details.
    101, 1, 2, xxxxxx
    102, 2, 1, yyyyy
    in cube, u've SIDs for MD... so when u read the details for say PONo 101, u pick sender SID & receiver SID & read details from master data table...
    other example:
    u r working somewhere.. u have employee ID & ur other details like name, address... all these get store in 0employee master data..
    when in HR module ur salary is generated, salary module will hold only ur employee ID.. but from ur ID other details u can get.. rite?
    same way leave module will have ur Id.. & it can get details bout ur leave & address...
    both is true for ur manager.. but when ur leave is to be approved.. ur manager ID is required...when ur manager apply for leave his managerID is used.. all this get store in same leave module..

  • Notification - reference object/reference documents

    hi all,
    When I create a new notification number for a given notification type in our system, there is a subscreen for reference object (such as material number) and reference document (such as production order number)
    Is it possible to have a notification created for more than one material number or more than one production order?
    Does this have to be with ABAP defining new screens?
    Thanks,
    neo

    Hi Neo,
    there's a new feature since EHP 5.
    Check this:
    Assigned Objects - Quality Notifications (QM-QN) - SAP Library
    This is the only way I know to assign more than one object to a notification (without ABAP),
    Chris

Maybe you are looking for