Pm order text not copied to a requisition

Good day, can sumone help me with this, i have created a pm order with text but when converted to a Purchase requisition the PM order text is not copied to the requisition.
rgds
Jabu

Hi,
IMG> MM> purchasing> Purchase requisition> Texts for PR-->
in that 1) define text types
2) define copying rules
in that link PR to Pm order
Thanks & regards
Swathi

Similar Messages

  • Material PO text not copying to Purchase Requisition

    Any assistance would be gratly appreciated...
    When creating a Purchase Requisition (ME51N) text from the Material Master - Material PO Text automatically copies to the Material PO Text of the Purchase Requisition line item - as expected
    However, when a Purchase Requisition is created via MRP, the Material PO Text is not copied from the material master to the PO.
    In config, copy rule is set as follows for PRs:
    Sequence   PR Text                     Source
    01               Material PO Text       Material Master   Set to always adopt
    We have a custom program to print PR data and the material PO text is not showing up when generated by MRP - because the PR itself does not have the text.  We could change the custome code to read directly from the material maste, but would prefer a standard solution to get the text onto the PR.
    Thanks,

    this is SAP design, for performance reasons the PO text is not copied to the requisition in MRP run.
    SAP issued an OSS note about this .

  • Sales order should not copy the net value from contract

    Hi,
    When we are creating the sales order,Where we can maintain that sales order should not copy the net value from contract.
    Regards
    Prabudh

    Hi,
    When I am creating the sales order with reference to contract,it's copying the net value and quantity from the contract.
    But I want  that sales order should not copy the net value and quantity from the contract and user can take new required quantity at the time creating the sales order.
    Regards
    Prabudh

  • Quantity Copied in Purchase Order is not same as Purchase Requisition

    Dear All,
                                                                                    I have create a P.R with Quantity = 154.762,800 , but when this P.R was used to Create a Purchase Odrer but here the Quatity copied from P.R is 154.762 only , which is not as same as P.R , also during creation of P.O , I got a Warning Message as below  ( but i am able to save this P.O) :
    Order quantity violates rounding rules (See long text)
    Message no. ME386
    Diagnosis
    The rounding rule(s) marked with 'X' has/have been violated:
    [_] Rounding via static rounding profile
    [_] Rounding to order unit via dynamic rounding profile
    [_] Rounding to logistics unit via dynamic rounding profile
    [_] Minimum order quantity not reached
    [_] Maximum order quantity exceeded
    [_] Order quantity rounding value
    [_] Delivery unit
    [X] Fixed number of decimal places specified
    [X] Rest could remain because no variable order unit allowed
    System Response
    Rounding proposal: 154.762,000 ZAE (= 154.762,000 ST )
    When you enter the order quantity for the first time, the system converts the quantity and order unit automatically in accordance with the rounding proposal.
    If you change the order quantity, the system does not automatically adjust it.
    Example
    The following dynamic rounding profile exists:
    With an order quantity >= 150 pcs. the system rounds to two boxes
    With an order quantity < 150 pcs. the system rounds to 1 box.
    You order 160 pcs. The rounding proposal is as follows:
    2 Cases (= 160 pcs.)
    When you enter the order quantity for the first time, the rounding proposal 2 BOX is adopted.
    If you change the order quantity, the quantity entered remains unchanged. If you wish to adopt the rounding proposal, adjust the quantity accordingly.
    Can ne one help me how to check n where to Check / Maintain so that the Quatity should be copied in P.O as saame as it is in P.R.
    Best Rgds,
    sap11

    I think i have resolved the issue , here in trxn = cuni the decimal pl. rounding is to be maintain for that particular unit of measure.
    Steps
    1)Use Trxn -CUNI
    2)Click on Tab -Unit of Measurement
    3)Select the Unit which is to be used in Purchase Order
    4)After selecting go to Details icon on top
    5)In Conversion format enter the digits as per your need in Decimal Pl. rounding.
    6)In my case it is maintained as Zero, due to this reason the digits after decimal are not copied from P.R to P.O , But if this  Decimal Pl. rounding is mainained as 3 then system will allow me to copy the digits upto three digits after decimal.
    Rgds,
    sap11

  • Order Header Text not copied to Invoice Header

    Hi All friends
    I have created text id for copiying sales order header to invoice header in votxn. I assign in text procedure of sales order as well as Invoice text procedure. I create sales order with maintaining text ID But when i created invoice with same sales order text id is not copied. Please suggest me what steps i should take and what Access sequence i must maintain to copy text from Sales order to Invoice.
    I have maintained the access sequence and maintain the required text id in access sequence. But system is only access the first text id from order header to Invoice header not other text id  which i maintain in order.
    Regards
    Shambhu
    Edited by: SHAMBHU SARKAR on Dec 29, 2008 12:30 PM

    Hi shambu
    while doing text determination in one step in i think in text id's in text procedures, maintain as TEXT IS OBLIGATORY AND SHOULD BE DISPLAYED WHILE COPYING.
    Text is obligatory and displayed when Transferring - whatever text you have entered in the sales order that will be copied into preceding document say delivery or billing
    Regards
    Srinath

  • Sales Order Text not getting copied after configed with tcode VOTNX

    Hi All ,
    We have configed  one of  sales order texts to be copied from customer master text at sales org level  .
    It works fine for some sales org , But for some it does not and says "Text could not be structured " in log .
    I tried to debug while creating sales order , But unable to reach the point where the texts are copied .
    Any help would be appriciated .
    Thanks
    Vinay

    Wanted to add more thing ,
    The log Says that the error is recogized by the sapscript FM INIT_TEXT.
    Thanks
    Vinay kolla

  • Text not copying

    Dear Guru's,
    In my sales order cycle the header text is not copying to the billing text whereas item text is copying.  Pl guide me so that header text also should get copied from order to billing.
    Regards,
    Santosh

    Hi,
    Check in VOTXN whether you have maintained and assigned same text id at sales document header level and billing document header level.The procedure is create new text types,assign the new text id in the text determination procedure,define and assign an access sequence to the new text id,Assign the text determination procedure to sales document type and billing document type.
    Regards,
    Hari Challa.

  • Purchase order number not update in purchase requisition status tab

    Purchase order is created for purchase requisition. The purchase requisition is triggered through process order. When I checked purchase requisition details in ME53N status tab, status is not edited and purchase order number also not present.
    Kindly let me know the possible reason for this.
    Appreciate your help..
    Thanks,
    SAP PQ

    If the PO had been created without reference to the PR, it will not be updated in the PR.
    If it has been created with reference to the PR, then the PR number gets updated in the PR status.

  • Material Master and CMIR Texts not copied after Client Copy

    Hi All,
    We had a scenario wherein we had to copy our production client and create a new client (Preproduction). When we performed the client copy, i see that the texts maintained in material master (sales text) and Customer material info record are not not copied into the new client.
    Can somebody suggest me a way out for this..
    Thanks and Regards
    Bhushan

    Hi All ,
    Closing this thread as the same have got copied into the new client after recopying..
    Regards
    Bhushan

  • Sales order number  not copied to documents in accounting

    Dear all,
    I have created normal sales order ,delivery and billing and creation of excise billing invoice which i do for the sales  which happens directly from factory.
    now go to VF02, and click on 'accounting overview '  click on accounting document .Here sales order number (COBL-KDAUF) is not copied. where as accounting document generated for excise invoice sales order number is appearing .
    The same is the case with  STO through SD route ....
    kindly suggest . 
    thanks,
    Shankar

    Dear Shankar
    As you would be aware, four Accounting Documents would be generated for one billing document viz
    -  Accounting Document for Customer Debit
    -  Profit Center
    -  Controlling Document
    -  Profitability Analysis
    Of the above four documents, in which you have seen.  You can see the order reference in Profitability Analysis. 
    thanks
    G. Lakshmipathi

  • Shipping Instructions text not copied from Sales Order to Delivery Document

    Hi All,
    The Shipping instructions text in the Sales order Header is entered manually. Now when the delivery is created, the text is not getting copied to the Header text (shipping instruction note) of the Delivery document.
    What may be the problem. Can anybody help ?

    Hi
    Check this link
    http://learnsaptips.blogspot.com/2010/09/text-type-configuration-in-sap.html
    regards
    Prashanth

  • SRM PO vendor text not copied to PO material text in ECC Po

    Hi all,
    We are on SRM 5.0 Extended Classic.
    In ECS,is it std functionality that the PO vendor text from SRM PO is copied to PO material text in the ECC PO?If so,Do we need to do any configuration on the SRM side for this transfer?
    Thanks!

    Hi,
    In standard the Vendor text in SRM P.O would not get transfered to P.O Material text in ECC.
    I am not sure why do you want to transfer vendor text to material text.
    You need to use BADI BBP_ECS_PO_OUT_BADI to transfer this text to the required field in P.O.
    Please speak to your ABAPer and get the coding done to achieve your requirement.
    Let us know in case of any further clarifications.
    Regards,
    Teja

  • Service long text not copied in PO print preview

    Hi,
    I have maintained Long text while creating Service master...Now when i am creating PO for that service...In the Item table under Service text coloumn , if i am clicking on it , i am getting my text which was maintained while creating Service master...Now after saving, if i am seeing this is print preview, my long text data is not getting copied in PO print preview..
    What went wrong?
    uts

    Hi Utsav,
    If the text was short is it shown in prinit  preview ?
    If yes , then Contact ur ABAPer for adjusting the form .
    If not ,change the Form - Sapscript through ABAPer to print the changes
    Regards
    Ramesh Ch

  • Serial Number from PM order is not copied in MB11 & TO

    Hi Gurus,
    We create refurbishment PM order in IW81 and specify the ser
    ial number of the equipment to be refurbished. Once saved system creates re
    servation.
    When doing goods issue against the reservation it doesn't c
    opy the serial number from the order and it asks to enetr the serial number
    again. What settings will make it to copy from th eorder itself?
    Also
    when we create Transfer Order in Wm again it doesn't copiy the serial numb
    er from the GI document? what settings should we make to get the serial num
    ber copied from the material document into the TO?
    Please advice - appreciate any help.
    Thanks,
    Khan

    khan,
    serial numbers in goods issue i have to check.For WM,please activate the serial number in the service parts management.
    pl.check the path
    img>LE>service parts management(spm)>maintain extended wm-specific parameters
    then enter and select your wm and activate the radio button"allow serial numbers in decentralized wh.
    regards
    venkadesh

  • Text messages not copied from sales order to billing

    Text messages which have been given in sales order are not copied to billing. Two of the text are copied and the other two are not getting copied. Checked the access sequence.. everything is correct.
    Please give a clue.

    Dear DV,
    These are basic settings to copy the Text from sales order to Invoice so please check in these areas,
    First you need to copy the sales order text to the delivery document from the delivery document you can copy the text to the billing document.
    To copy the sales order text to the delivery document
    You do the text determination for the deliveries also,define and maintain same TextId in the delivery header text procedure ,maintain the access sequence ,in the delivery text procedure access sequence you put the Text Object as VBBK for that Text ID.
    Make sure that you have assigned access sequence for your missed Text ID's in VOTXN transaction
    To copy the delivery text to the invoice.
    You do the text determination for the billing document,define and maintain same TextId in the billing document text procedure and maintain the access sequence,after that
    Go to VOFA transaction then selct billing document type then go in to the details screen here you do the check in the Delivery Text check Box (Top most bottom of the screen.)
    Now you can able to copy the sales order text to the invoice.
    Use VOTXN transaction for Text determinetion
    I hope this will help you,
    Regards,
    Murali.

Maybe you are looking for