PM: Print / View Production Resource Tools - documents from Iw32

Hi SAP Gurus,
My requirement is to create a customized program to print the documets save in Production Resource Tools-IW32/IW33.
Please suugest!
Thanks and Regards,
Pavan.

Hi,
I know this post is old, but to answer the question:
Yes, you can link, using Object Linking functionality in DMS, to a PRT.
The object is a bit obscure in the object list, but, when selecting a object in the DMS Config>Define Document Type>Define Object Link, look for the object called CRVS_B.
This is the PRT Object Link's definition, which will then allow Object Linking functionality as required.
The other way, as mentioned earlier, is to simply use the PRT functionality from your transaction, i.e. IA06 to link to a DIR. This has the downside though that the bi-directional navigation from DMS<>PM for example will not exist.
Regards,
Freddie.

Similar Messages

Status: Production resource/ tool

Hi,
I don't understand the function status for production resource/ tool.
1. MM01. in the view Production resource/ tool and in the field Plant-Specific Material Status there are 2 choices. 01 blocked for procment/whse and 02 blocked for task list/ BOM.
I would like to blocked the material for the routing. when I choice 02 It isn't been blocked for the routing. when I choice 01 It is blocked. I don't understand it because it is the opposite.
2.The same in the PRT Master there are 3 status 01created on 02 release for PRT usage planning, 03 release for production. When I choice 02 I It is blocked for the Routing although 02 has to be release for the routing. with 03 function correctly
Can you explain me how the status function in the 2 cases. Do I do it wrong?

hi
May be it has been customized in different way .kindly check in OMS4
regards
thyagarajan

From Which table Production resource/tool number can be retried

Hi Friends,
In SAP Query I am Using MAPL,PLAS, PLPO, PLKO, I want to retrieve Production resource/tool number PLFHD-FHMNR, can any one tell in which table it is storing the value.. & what link condition I need to use to retrieve thisfield.. Transaction CA03.
Thanks,
Ravi.

FHMNR is stored in table ADFSH_PRTHEAD. You may need to pass ORGEH - Org. Unit to get the Production resource/tool number.
This may help you.
Regards
Karthik D
P.S. May i know why you have mentioned FHMNR in all your answered questions today?

Production resources/tools

Dear gurus,
Could you please help me with the following issue.
There is a neccessity to use production resources/tools, because we have materials, that
Firstly, are produced,
Secondly, are used in production, but should not add value to it,
Thirdly, have some durability, which is diminished during the usage of PRT,
Forthly, are being repaired, and the durability is being restored.
Plant maintenance is not implemented.
I know from help, that it is possible to create PRT as a material, machine or a document and maintain in the rooting.
Tell please, is it possible to create a material type FHMI (PRT) in order to:
1. Produce it (not procure).
2. Maintain "ST" a basic UoM for it, but also to maintain some durability for it somewhere.
3. Maintain it in the rooting.
4. During the production order confirmation, diminish the durability without diminishing the quantity.
5. To issue this material to CO-order for repairs (without plant maintenance), when the durability reaches 0, and somehow to restore the durability for it.

Hi Nikolaj,
It's very common requirement in many implimentations. But unfortunatley SAP does't support that process in PP module. Only from PM module we can support that process.
But there are many ways to map process by using small development.
Eg.1 Delcared PRT as material master and assign it in BOM. And update a Z field in BOM depending on the number of production order qty. when it reaches zero we can trigger message!!.
Any way you need CO order only for settlement. So you can always book cost for restoring the PRT to relevant cost object.
Eg.2.
Create other or doc PRT and assign it to a routing for a specific operation. And then trace that operation in the production order by a development and manage the life of PRT.
Reg
Samson

PRT Production Resource Tools Counter

Hi,
I am trying to setup a production resource tool which is counted at time of production.
I have setup the Material, Equipment, BOM, Counter, Routing.
When executing a production order the Counter is not updated with the ammount produced.
Does anyone have a manual on how to setup PRT Counters. I have looked on the SAP Library but this is not sufficient to solve the problem.
Regards
GIlbert

Dear Gilbert
You have to create the equipment as PRT Equipment category. In PRT data you have to assign the (counter) measuring point and maintain the usage formula. Assign the Equipment PRT in the production orders and Enter the usage value and UOM. Ensure the UOM of the usage value and the UOM of the characterestic value you have assigned in the measuring point are same.
Now the confirmation will update the measuring point by creating a measuring document for the measuring poit to the count of the confirmation you are entering.
Regards
Soundararajan M.

Difference bet ween Fleet Object and Production Resource Tools

Hi all,
Please give me the difference between Fleet Object and Production Resource Tools in Plant Maintenance
Thanks in Advance
Thanks,
shriraam

Dear,
Production Resources/Tools (PRT)
Unlike machines and fixed assets, production resources and tools (PRTs) are movable (not stationary) operating resources that are required to perform an activity and can be used repeatedly. For example, PRTs include documents, engineering drawings, jigs and fixtures, and measurement instruments.
Fleet Management
Here can map the vehicles as equipment master records and enter vehicle-specific additional data, which is displayed in the system on two additional tab pages. This means that you can now specify important fleet data such as the license plate number, load volume, consumption data, fuel card number, engine data, or fuel type and so on directly in the equipment master record.
You can also perform maintenance planning for a fleet object. You can make the date of the next scheduled service dependent on the distance
Please refer this link,
[Link|http://www.nd-solutions.com/pdfs/white_EAM/EAM_ConfiguringFleetMgt.pdf]
Regards,
R.Brahmankar

Material type FHMI(product resource/tools)

hello gurus,
can u tell me why materials under material group FHMI production resource / tools are only managed on quantity basis

Dear Raghu,
Production Resources/Tools (FHMI) are unlike machines and fixed assets, production resources and tools (PRTs) are movable (not stationary) operating resources that are required to perform an activity and can be used repeatedly.
For example, PRTs include documents, engineering drawings, jigs and fixtures, and
measurement instruments.
Please follow the link to know more :
http://help.sap.com/printdocu/core/print46c/en/data/pdf/psprt/psprt.pdf
Regards,
Syed Hussain.

MATERIAL TYPE : Production resource/Tool...

Hi...
MATERIAL TYPE : PRODUCTION RESOURCE/TOOL.
Friends..i want to know about the above material .and its uses..generally i heared that this type of materials mostly used in manufacturing industries...if i want to configure this in which way i can configure..and let me know brief about material (production resource/tool..)
(or)
plz share with me your experience about this type of material and its configurations..
It will be verry helpfull to me..
Regards,
Sirish

Hello,
Please go through this documentation:
http://help.sap.com/printdocu/core/print46c/en/data/pdf/PSPRT/PSPRT.pdf
Prase

IA07 : Key for Task List Group and Production resource tool number link

HI abapers,
In IA07 TCODE , i want to retrieve Key for Task List Group( PLNNR ) and Production resource tool number ( FHMNR) .
In technical settings for both the feilds, structure names are mentioned.
Is there any function module or table link to retrieve both .
thansk & regards
Raghul

Hi Raghul,
i am also facing the same issue. Kindly let me know if u get any solution for this.
Thanks in advance.
-AruN.

How to Set up PRT (Production Resource Tool)

Hi ,
Anyone knows How to Set up PRT (Production Resource Tool) for equipment , is it all master data set up or there any configuration required to activate PRT .
Thanks
Pawan

just in case have a quick look here:
http://help.sap.com/saphelp_47x200/helpdata/en/89/a42719461e11d182b50000e829fbfe/frameset.htm
Logistics - Production Process - Master Data - Production Resources/Tools - Production Resources/Tools - Equipment - Create.
spro->production planning for process industries->master data->production resources/tools (PRT)
you will see 5 transactions to configure your settings:
-define PRT auth.grps
-define PRT status
-define Task List Usages
-define PRT Group Keys
-Define Overview Variant for Where-Used List/Mass Replacement

Datasource for capture of PRT (production resource tool) details in PM

Hi,
I searched for a datasource which gives the production resource tools (PRT's) assigned to an activity in a maintainance order (Plant maintainance). I was not able to find any!. Should we go for a generic extracor to have the PRT details in a maintainance order?
If yes what are the tables that we can get this details.
Thanks in advance.
Rajeeve Patric

Hi Gurus,
still waiting for your update on this..

Documents to be linked from DMS to Production Resource Tools

hi, All
I want to Link some documents to PRT through DMS.
From DMS i choosed object link Production resourec/tools.
I searhed PR/T no result found.
So Now i want to Know that How i could Creat PRT and Link some document to PRT.
Any one help me
Rgds,
Ben

Hi,
I know this post is old, but to answer the question:
Yes, you can link, using Object Linking functionality in DMS, to a PRT.
The object is a bit obscure in the object list, but, when selecting a object in the DMS Config>Define Document Type>Define Object Link, look for the object called CRVS_B.
This is the PRT Object Link's definition, which will then allow Object Linking functionality as required.
The other way, as mentioned earlier, is to simply use the PRT functionality from your transaction, i.e. IA06 to link to a DIR. This has the downside though that the bi-directional navigation from DMS<>PM for example will not exist.
Regards,
Freddie.

Word Viewer will not open documents from Sharepoint 2013 in IE11

I've run into an issue while trying to open documents from SharePoint 2013 after upgrading to IE11. My organization uses Word Viewer with the compatibility pack and all other Word documents (local files, intranet hosted) will open with no problems. When
trying to open a Word document from SharePoint the Word Viewer will open, but the file does not. We have verified that all Windows Updates are installed. We have tried opening SharePoint in Compatibility View and Enterprise Mode. We have re-downloaded the
latest version of Word Viewer and reinstalled it along with the compatibility pack. If we open the SharePoint site in Explorer view and then open a Word document it will open in Word Viewer with no problem. Excel and PowerPoint documents open from SharePoint
with no problem. This is only affecting Word documents with Word Viewer. When using the full version of Word the documents open fine. Within SharePoint we have tried activating the site collection feature "Open Document In Client Applications by Default"
but it made no difference. We're completely at a loss how to make this work as there doesn't seem to be much information specifically pertaining to issues with Word Viewer.

Hi Victoria.
1. The PCs do not have Microsoft Office installed, nor are we using the Office Web Apps. "Word Viewer" means the Microsoft Word Viewer application available here (http://www.microsoft.com/en-us/download/details.aspx?id=4) that is available
free for read-only viewing of Word documents.
2. There are no errors when I open Word docs in Word Viewer. The Word Viewer application launches after clicking a Word document link in Sharepoint, but there is no file open in it. When that happens the IE11 Sharepoint window on the taskbar is flashing
yellow, but when I click back to it there are no messages or alerts to click on.
3. This issue does occur with all Word documents (.doc, .docx) in SharePoint. However, it does not occur when opening Word documents in the Word Viewer when they are local files or through IE11 from a non-SharePoint website like our local intranet.
Those files will open with no problem in Word Viewer.
4. I will try to get a screenshot, but we are working on creating images for deployment and I don't currently have a machine configured the same way. I'll work on reconfiguring one and post a screenshot.
Thank you for your help!

My MG5220 won't print an original 3 page document from rear tray.

I have only recently had trouble printing original documents from rear tray. I have completed maintenance ( cleaning), checked paper media, etc. I have checked page set-up, etc. I think I am overlooking something that is obvious but I can't see the forest for the trees. Please advise. Thanks!

Hi Kashmie,
To try and resolve the issue, with a flashlight or other bright light, please check the paper feed area of the printer and verify that there are no paper jams or obstructions in the printer that may be causing the paper not to feed. Once this has been done, please look inside of the printer where the inks are located and ensure that there are no obstructions in there that may be causing the print head not to move freely. Next, please remove and reseat all of the ink tanks in the printer. Once all of these steps have been performed, if you still experience difficulty, please call or email us at one of the methods on the Contact Us page for further assistance.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

View the versions of document from share point document library using code.

HI
i want to develop a web application (asp.net) from
1) users will browse and view documents saved in document library by passing a documents DocumentID as parameter
to sharepoint 2010 web application.
2)also that document has versions and how users will view required versions, if user will upload document to document library
it will create new version and if user will same document with same name it over-right as new version.
and how user will view the old version
adil

Replay:
From your description, my understanding is that you want to develop a web application to view document history versions of SharePoint 2010.
You could accomplish your requirement by using Client Object Model, please refer to this article:
https://msdn.microsoft.com/en-us/library/office/ee857094(v=office.14).aspx.
You could refer to this code below:
namespace clientOM
class Program
static void Main(string[] args)
ClientContext clientContext = new ClientContext("siteUrl");
Web site = clientContext.Web;
clientContext.Load(site);
List list = site.Lists.GetByTitle("Documents");
clientContext.Load(list);
clientContext.ExecuteQuery();
CamlQuery query = new CamlQuery();
query.ViewXml = "<View/>";
ListItemCollection allContacts = list.GetItems(query);
clientContext.Load(allContacts);
clientContext.ExecuteQuery();
FileCollection allFile = list.RootFolder.Files;
clientContext.Load(allFile);
clientContext.ExecuteQuery();
foreach (File file in allFile)
string version = file.UIVersionLabel;
FileVersionCollection versions = file.Versions;
clientContext.Load(versions);
clientContext.ExecuteQuery();
foreach (FileVersion hisVersion in versions)
string hisversion = hisVersion.VersionLabel;
Best Regards
Vincent Han
TechNet Community Support

PM: Print / View Production Resource Tools - documents from Iw32

Similar Messages

Maybe you are looking for