Pm-suspend not waking up properly

The log file does not indicate a problem. It goes to sleep fine, but when i wake it up the monitor does not come back on and the keyboard (usb) is flashing on and off.
here is the /var/log/pm-suspend.log:
Initial commandline parameters:
Mon Jun 15 15:30:13 EDT 2009: Running hooks for suspend.
/usr/lib/pm-utils/sleep.d/00auto-quirk suspend suspend: Adding quirks from HAL: --quirk-dpms-on --quirk-dpms-suspend --quirk-vbe-post --quirk-vbemode-restore --quirk-vbestate-restore --quirk-vga-mode-3
success.
/usr/lib/pm-utils/sleep.d/00logging suspend suspend: Linux [myhostname] 2.6.29-ARCH #1 SMP PREEMPT Wed May 20 06:42:43 UTC 2009 x86_64 Intel(R) Core(TM)2 Duo CPU E7200 @ 2.53GHz GenuineIntel GNU/Linux
Module Size Used by
ipv6 312576 16
coretemp 6864 0
it87 26536 0
hwmon_vid 3664 1 it87
fuse 61968 4
ext3 141344 1
jbd 54520 1 ext3
raid1 23920 1
parport_pc 39720 1
ppdev 8536 0
usb_storage 110688 0
i2c_i801 10416 0
lp 11556 0
parport 35152 3 parport_pc,ppdev,lp
iTCO_wdt 12912 0
iTCO_vendor_support 3540 1 iTCO_wdt
pcspkr 2800 0
serio_raw 6132 0
sg 30432 0
r8169 37972 0
mii 5296 1 r8169
snd_hda_codec_realtek 256852 1
nvidia 10266440 0
joydev 12096 0
i2c_core 24000 2 i2c_i801,nvidia
snd_hda_intel 29256 0
snd_hda_codec 68112 2 snd_hda_codec_realtek,snd_hda_intel
intel_agp 30608 0
thermal 18928 0
processor 44296 1 thermal
fan 5240 0
evdev 11744 5
button 7344 0
battery 12504 0
ac 4984 0
vboxdrv 1698988 0
loop 17724 0
snd_seq_oss 33760 0
snd_seq_midi_event 7248 1 snd_seq_oss
snd_seq 57024 4 snd_seq_oss,snd_seq_midi_event
snd_virtuoso 12772 0
snd_oxygen_lib 33872 1 snd_virtuoso
snd_mpu401_uart 8112 1 snd_oxygen_lib
snd_rawmidi 23552 1 snd_mpu401_uart
snd_seq_device 7268 3 snd_seq_oss,snd_seq,snd_rawmidi
snd_hwdep 8632 1 snd_hda_codec
snd_pcm_oss 42656 0
snd_pcm 80920 4 snd_hda_intel,snd_hda_codec,snd_oxygen_lib,snd_pcm_oss
snd_timer 22816 2 snd_seq,snd_pcm
snd_page_alloc 9760 2 snd_hda_intel,snd_pcm
snd_mixer_oss 16784 1 snd_pcm_oss
snd 65928 15 snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_seq_oss,snd_seq,snd_virtuoso,snd_oxygen_lib,snd_mpu401_uart,snd_rawmidi,snd_seq_device,snd_hwdep,snd_pcm_oss,snd_pcm,snd_timer,snd_mixer_oss
soundcore 7680 1 snd
slhc 5968 0
rtc_cmos 12152 0
rtc_core 20100 1 rtc_cmos
rtc_lib 2864 1 rtc_core
ext4 234056 2
mbcache 8148 2 ext3,ext4
jbd2 63264 1 ext4
crc16 1968 1 ext4
dm_mod 62896 10
raid0 6960 2
md_mod 91252 5 raid1,raid0
sr_mod 16900 0
cdrom 38504 1 sr_mod
sd_mod 27624 12
usbhid 40640 1
hid 49568 1 usbhid
pata_acpi 5232 0
ata_generic 5940 0
ahci 36192 8
sata_sil24 15572 0
uhci_hcd 25424 0
pata_jmicron 4016 0
libata 176684 5 pata_acpi,ata_generic,ahci,sata_sil24,pata_jmicron
ehci_hcd 39100 0
scsi_mod 118648 5 usb_storage,sg,sr_mod,sd_mod,libata
usbcore 160400 6 usb_storage,usbhid,uhci_hcd,ehci_hcd
total used free shared buffers cached
Mem: 8180104 626156 7553948 0 30660 499376
-/+ buffers/cache: 96120 8083984
Swap: 3903608 0 3903608
success.
/usr/lib/pm-utils/sleep.d/00powersave suspend suspend: success.
/usr/lib/pm-utils/sleep.d/01grub suspend suspend: not applicable.
/usr/lib/pm-utils/sleep.d/11netcfg suspend suspend: success.
/usr/lib/pm-utils/sleep.d/49bluetooth suspend suspend: not applicable.
/usr/lib/pm-utils/sleep.d/55NetworkManager suspend suspend: success.
/usr/lib/pm-utils/sleep.d/75modules suspend suspend: not applicable.
/usr/lib/pm-utils/sleep.d/90clock suspend suspend: not applicable.
/usr/lib/pm-utils/sleep.d/94cpufreq suspend suspend: success.
/usr/lib/pm-utils/sleep.d/95led suspend suspend: not applicable.
/usr/lib/pm-utils/sleep.d/98smart-kernel-video suspend suspend: success.
/usr/lib/pm-utils/sleep.d/99video suspend suspend: kernel.acpi_video_flags = 0
success.
Mon Jun 15 15:30:13 EDT 2009: performing suspend
Mon Jun 15 15:30:45 EDT 2009: Awake.
Mon Jun 15 15:30:45 EDT 2009: Running hooks for resume
/usr/lib/pm-utils/sleep.d/99video resume suspend: success.
/usr/lib/pm-utils/sleep.d/98smart-kernel-video resume suspend: success.
/usr/lib/pm-utils/sleep.d/95led resume suspend: not applicable.
/usr/lib/pm-utils/sleep.d/94cpufreq resume suspend: success.
/usr/lib/pm-utils/sleep.d/90clock resume suspend: not applicable.
/usr/lib/pm-utils/sleep.d/75modules resume suspend: success.
/usr/lib/pm-utils/sleep.d/55NetworkManager resume suspend: success.
/usr/lib/pm-utils/sleep.d/49bluetooth resume suspend: not applicable.
/usr/lib/pm-utils/sleep.d/11netcfg resume suspend: success.
/usr/lib/pm-utils/sleep.d/01grub resume suspend: not applicable.
/usr/lib/pm-utils/sleep.d/00powersave resume suspend: success.
/usr/lib/pm-utils/sleep.d/00logging resume suspend: success.
/usr/lib/pm-utils/sleep.d/00auto-quirk resume suspend: success.
Mon Jun 15 15:30:45 EDT 2009: Finished.

How much RAM do you have? Does this happen only when you have a lot of applications running, or completely randomly? How long do you wait before you power cycle?
I ask because I was having the same problem, until I realized that I was being impatient. Sometimes it just takes a while for the login screen to appear after you wake the computer. Probably the computer is swapping a bunch of stuff back into (or out of?) memory as part of the wake up process. Mind you, I don't swear that this has always solved my problem, and therefore cannot promise that this will solve yours.
2x512MB, 2.16 GHz, 15.4" Macbook Pro Mac OS X (10.4.8)

Similar Messages

MacBook Pros Not waking up properly even after clean re-install

I just bought a used 17" Quad core MBP with 16gb of ram. I installed a samsung 512gb 840 Pro series SSD, transferred all my info from my old dual core i7 17" MBP. So both are 10.8.4.
The new MBP started not waking up from sleep. The keyboard would like up and the light in the front would indicate that it has started, but then it doesn't show anything on the screen.
Ultimately, I decided, i'll just do a clean re-install of OS 10.8 because maybe something went wrong in the migration. Now, with a fresh install when i wake it from sleep it seems to open as if it ran out of power and is doing a restore power up. The screen opens at half opacity and I get some progress dots and its back quickly. But it's still strange. The only thing installed on the computer at all is adobe production suite.
Odd thing is, that the OLD computer, the DUAL core i7 17" MBP is also not waking up from sleep properly now. It also has a new 128gb SSD drive It BTW. It doesn't fully wake up, so I have to hold down the power button, shut it down then turn it back on again. And again it does a recovery startup.
so now I have TWO computers having almost the same issues, and one of them has a fresh install. So what could the problem be? totally diffferent hardware. Does 10.8 not like SSD's in 17" MBP's?
any tips would be apreciated.

One last detail, connectivity through my iPhone's hotspot works completely fine. No idea if that is related / helpful in any way.

Windows 7 on imac 27 not waking up properly

Hi,
I have an imac 27 , I've installed windows 7 on it. There is one bug that is persisting no matter what I do.
The machine works all fine except on wake up from sleep it often(>70%) crashes.
I have tried the following
1) installing windows 32 bit versus 64 bit, no change
2) installing win 7 only (removing mac OS and no boot camp), no change
3) tried to flush PRAM as described in other articles
4) tried it in safe mode
5) removed 2G of 4G memory for both of memories
Any insight is appreciated....

HI and Welcome to Apple Discussions...
Try Resetting the SMC
Carolyn

IMac not waking up

Hello everyone.
For some reason my 27" late 2012 iMac is not waking up properly. This seems to be since upgrading to Yosemite 10.10.1 - it never happened on vanilla 10.10.
What happens is this: I'll come back to my Mac for the first time in the day having left it asleep the last time I used it, and find it won't take at all - nothing happens on touching any keys or clicking the trackpad. Even pressing the power button does nothing - it might as well be off, if it weren't for the fact that pressing the power button if it was off would at least turn it on. The only way I've found to bring it back to life is a hard reboot by pulling the IEC out of the back, which is really something I'd obviously rather not have to do every time I want to use my computer.
I has assumed this was an issue with not waking from sleep, so yesterday after using my Mac I disabled computer sleep and just put the display to sleep, but today when I came to use it once again I was greeted with an unresponsive blank screen.
I've never had this sort of problem before so I'm not sure what troubleshooting steps to try.

Hello Rob!
Apart from the update to 10.10.1, did you install anything else? If you have the chance, test from Safe Mode without any applications open:
OS X: What is Safe Boot, Safe Mode? - Apple Support

DP 1.25 not waking properly

My boot drive is an SATAII Seagate running to a SIIG SATA PCI card for Mac. Both of these devices have run perfectly in the past and this is the first instance of trouble I have experienced.
When I try to wake the machine (previously having been put to sleep), neither the mouse nor the keyboard will respond. I am using an Apple Pro Keyboard with a Mighty Mouse plugged into it, and the keyboard is plugged into the regular USB port on the Power Mac. The screen sits still with my password log-in box, but since I cannot type or move the mouse, it eventually goes back to sleep.
The only way to actually get it to log-in is to literally unplug the machine, plug it back in, and do a cold boot.
Any ideas as to what has happened that the USB is now not responding? I am not sure if it has to do with my boot drive being in a different location (than the regular bus) because this has not occurred before with my PCI SATA configuration.
Thanks for the help.

I will attempt your method of unplugging the keyboard to see what happens. And yes, I could try plugging in the MM to the Power Mac, but it is currently out of reach; however, hopefully your first fix will do the trick.
Answers to your other questions:
If I press the power button when it wakes up (but does not allow me to use the keyboard or mouse) it goes back to sleep, as it should because I set it up to do that.
I do not have an Apple CInema or other Apple display, just a regular LCD.
I do have an external USB hub but it is not in use at the moment. And neither is my installed USB2 PCI card. [As an aside, I've noticed that when I transfer lots of large files from something plugged into the USB2 PCI card to the hard drive on my SATA PCI controller, the whole task will freeze and the computer will not respond until I take the USB2 drive (usually flash) from out of the PCI card. I have a feeling I am maxing out the bandwidth with that usage, but have currently found no workaround - apart from me now looking for a large-capacity ATA100 drive instead of the SATA PCI setup.]
As you had mentioned, I went ahead and turned off "put drives to sleep whenever possible"; I had just done an enormous amount of backing up and transferring data and hadn't realized my fresh install had that option on as default.
And, quickly, I have noticed one quirk to this not-waking-properly issue... When I let the computer fall asleep from not being used for over my auto-sleep time, it will wake perfectly. But if I use the Apple > Sleep command, then the problem will occur at my next attempt to wake it.
Thanks for the help. Sorry for my delays, but I just moved into a new apartment.

Suspend not working on HP dv-5t

I have a HP dv5-t laptop with an NVIDIA graphis card and I can't get suspend or hibernate to work.
When I run pm-suspend with gnome running, the screen flashes off then tuns back on to a black screen.
If I close gnome and unload the nvidia module and run pm-suspend my laptop will successfully enter suspend, but I'm stuck with a black screen on boot.
pm-suspend.log(with nvidia)
Initial commandline parameters:
Tue Apr 6 17:55:22 EDT 2010: Running hooks for suspend.
/usr/lib/pm-utils/sleep.d/00auto-quirk suspend suspend: Adding quirks from HAL: --quirk-dpms-on --quirk-dpms-suspend --quirk-vbe-post --quirk-vbemode-restore --quirk-vbestate-restore --quirk-vga-mode-3
success.
/usr/lib/pm-utils/sleep.d/00logging suspend suspend: Linux ZzzZ 2.6.33-ARCH #1 SMP PREEMPT Sun Apr 4 10:27:30 CEST 2010 x86_64 Intel(R) Core(TM)2 Duo CPU P8600 @ 2.40GHz GenuineIntel GNU/Linux
Module Size Used by
nls_cp437 5865 1
vfat 9924 1
fat 48460 1 vfat
fuse 58564 2
ipv6 282582 22
ext2 63684 1
btusb 11500 0
bluetooth 50955 1 btusb
snd_hda_codec_nvhdmi 4303 1
snd_seq_dummy 1439 0
snd_hda_codec_idt 52475 1
arc4 1354 2
snd_seq_oss 28984 0
snd_seq_midi_event 5348 1 snd_seq_oss
snd_seq 50397 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi_event
snd_seq_device 5181 3 snd_seq_dummy,snd_seq_oss,snd_seq
uvcvideo 60298 0
videodev 38395 1 uvcvideo
v4l1_compat 15610 2 uvcvideo,videodev
v4l2_compat_ioctl32 10417 1 videodev
ecb 2017 2
snd_pcm_oss 39107 0
snd_mixer_oss 17107 1 snd_pcm_oss
snd_hda_intel 22642 0
snd_hda_codec 68413 3 snd_hda_codec_nvhdmi,snd_hda_codec_idt,snd_hda_intel
snd_hwdep 6244 1 snd_hda_codec
snd_pcm 70222 3 snd_pcm_oss,snd_hda_intel,snd_hda_codec
iwlagn 244718 0
snd_timer 19213 2 snd_seq,snd_pcm
snd 57203 11 snd_hda_codec_idt,snd_seq_oss,snd_seq,snd_seq_device,snd_pcm_oss,snd_mixer_oss,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_timer
soundcore 6223 1 snd
iwlcore 156728 1 iwlagn
mmc_block 8993 2
snd_page_alloc 7097 2 snd_hda_intel,snd_pcm
mac80211 171772 2 iwlagn,iwlcore
uhci_hcd 21684 0
firewire_ohci 23737 0
joydev 9800 0
i2c_i801 8550 0
nvidia 10623056 35
firewire_core 43970 1 firewire_ohci
hp_wmi 4930 0
ehci_hcd 34938 0
iTCO_wdt 9157 0
iTCO_vendor_support 1873 1 iTCO_wdt
cfg80211 126658 3 iwlagn,iwlcore,mac80211
rfkill 15396 3 bluetooth,hp_wmi,cfg80211
sdhci_pci 6723 0
sdhci 16129 1 sdhci_pci
mmc_core 51748 2 mmc_block,sdhci
crc_itu_t 1273 1 firewire_core
i2c_core 17842 3 videodev,i2c_i801,nvidia
jmb38x_ms 8110 0
video 18746 0
output 1916 1 video
usbcore 144604 5 btusb,uvcvideo,uhci_hcd,ehci_hcd
memstick 6416 1 jmb38x_ms
hp_accel 11280 0
lis3lv02d 6683 1 hp_accel
r8169 34925 0
input_polldev 3258 1 lis3lv02d
led_class 2609 2 sdhci,hp_accel
ac 3091 0
mii 3834 1 r8169
battery 9612 0
thermal 12079 0
wmi 5957 1 hp_wmi
button 4746 0
processor 29639 2
psmouse 53142 0
sr_mod 14883 0
cdrom 35860 1 sr_mod
sg 25333 0
evdev 8852 19
serio_raw 4536 0
rtc_cmos 8990 0
rtc_core 14439 1 rtc_cmos
rtc_lib 1842 1 rtc_core
ext4 329882 1
mbcache 5658 2 ext2,ext4
jbd2 75681 1 ext4
crc16 1273 1 ext4
sd_mod 26984 4
ahci 35111 3
libata 154643 1 ahci
scsi_mod 94729 4 sr_mod,sg,sd_mod,libata
total used free shared buffers cached
Mem: 2055196 605436 1449760 0 31596 209240
-/+ buffers/cache: 364600 1690596
Swap: 2000084 0 2000084
success.
/usr/lib/pm-utils/sleep.d/00powersave suspend suspend: success.
/usr/lib/pm-utils/sleep.d/01grub suspend suspend: not applicable.
/usr/lib/pm-utils/sleep.d/11netcfg suspend suspend: success.
/usr/lib/pm-utils/sleep.d/49bluetooth suspend suspend: not applicable.
/usr/lib/pm-utils/sleep.d/55NetworkManager suspend suspend: success.
/usr/lib/pm-utils/sleep.d/75modules suspend suspend: not applicable.
/usr/lib/pm-utils/sleep.d/90clock suspend suspend: not applicable.
/usr/lib/pm-utils/sleep.d/94cpufreq suspend suspend: success.
/usr/lib/pm-utils/sleep.d/95led suspend suspend: not applicable.
/usr/lib/pm-utils/sleep.d/98smart-kernel-video suspend suspend: success.
/usr/lib/pm-utils/sleep.d/99laptop-mode suspend suspend: success.
/usr/lib/pm-utils/sleep.d/99video suspend suspend: kernel.acpi_video_flags = 0
success.
Tue Apr 6 17:55:22 EDT 2010: performing suspend
pm-suspend.log(without nvidia)
Initial commandline parameters:
Tue Apr 6 17:51:48 EDT 2010: Running hooks for suspend.
/usr/lib/pm-utils/sleep.d/00auto-quirk suspend suspend: Adding quirks from HAL: --quirk-dpms-on --quirk-dpms-suspend --quirk-vbe-post --quirk-vbemode-restore --quirk-vbestate-restore --quirk-vga-mode-3
success.
/usr/lib/pm-utils/sleep.d/00logging suspend suspend: Linux ZzzZ 2.6.33-ARCH #1 SMP PREEMPT Sun Apr 4 10:27:30 CEST 2010 x86_64 Intel(R) Core(TM)2 Duo CPU P8600 @ 2.40GHz GenuineIntel GNU/Linux
Module Size Used by
ipv6 282582 22
ext2 63684 1
btusb 11500 0
bluetooth 50955 1 btusb
uvcvideo 60298 0
videodev 38395 1 uvcvideo
v4l1_compat 15610 2 uvcvideo,videodev
v4l2_compat_ioctl32 10417 1 videodev
snd_hda_codec_nvhdmi 4303 1
arc4 1354 2
snd_seq_dummy 1439 0
snd_hda_codec_idt 52475 1
ecb 2017 2
snd_seq_oss 28984 0
snd_seq_midi_event 5348 1 snd_seq_oss
snd_seq 50397 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi_event
snd_seq_device 5181 3 snd_seq_dummy,snd_seq_oss,snd_seq
iwlagn 244718 0
mmc_block 8993 0
snd_hda_intel 22642 0
snd_pcm_oss 39107 0
iwlcore 156728 1 iwlagn
snd_mixer_oss 17107 1 snd_pcm_oss
snd_hda_codec 68413 3 snd_hda_codec_nvhdmi,snd_hda_codec_idt,snd_hda_intel
snd_hwdep 6244 1 snd_hda_codec
uhci_hcd 21684 0
hp_wmi 4930 0
snd_pcm 70222 3 snd_hda_intel,snd_pcm_oss,snd_hda_codec
mac80211 171772 2 iwlagn,iwlcore
hp_accel 11280 0
lis3lv02d 6683 1 hp_accel
jmb38x_ms 8110 0
snd_timer 19213 2 snd_seq,snd_pcm
ehci_hcd 34938 0
sdhci_pci 6723 0
cfg80211 126658 3 iwlagn,iwlcore,mac80211
sdhci 16129 1 sdhci_pci
joydev 9800 0
input_polldev 3258 1 lis3lv02d
memstick 6416 1 jmb38x_ms
video 18746 0
output 1916 1 video
battery 9612 0
thermal 12079 0
snd 57203 11 snd_hda_codec_idt,snd_seq_oss,snd_seq,snd_seq_device,snd_hda_intel,snd_pcm_oss,snd_mixer_oss,snd_hda_codec,snd_hwdep,snd_pcm,snd_timer
soundcore 6223 1 snd
snd_page_alloc 7097 2 snd_hda_intel,snd_pcm
button 4746 0
ac 3091 0
wmi 5957 1 hp_wmi
usbcore 144604 5 btusb,uvcvideo,uhci_hcd,ehci_hcd
processor 29639 2
rfkill 15396 3 bluetooth,hp_wmi,cfg80211
mmc_core 51748 2 mmc_block,sdhci
led_class 2609 2 hp_accel,sdhci
firewire_ohci 23737 0
firewire_core 43970 1 firewire_ohci
crc_itu_t 1273 1 firewire_core
i2c_i801 8550 0
i2c_core 17842 2 videodev,i2c_i801
sr_mod 14883 0
cdrom 35860 1 sr_mod
sg 25333 0
iTCO_wdt 9157 0
iTCO_vendor_support 1873 1 iTCO_wdt
r8169 34925 0
mii 3834 1 r8169
psmouse 53142 0
evdev 8852 10
serio_raw 4536 0
rtc_cmos 8990 0
rtc_core 14439 1 rtc_cmos
rtc_lib 1842 1 rtc_core
ext4 329882 1
mbcache 5658 2 ext2,ext4
jbd2 75681 1 ext4
crc16 1273 1 ext4
sd_mod 26984 4
ahci 35111 3
libata 154643 1 ahci
scsi_mod 94729 4 sr_mod,sg,sd_mod,libata
total used free shared buffers cached
Mem: 2055196 209272 1845924 0 26348 100008
-/+ buffers/cache: 82916 1972280
Swap: 2000084 0 2000084
success.
/usr/lib/pm-utils/sleep.d/00powersave suspend suspend: success.
/usr/lib/pm-utils/sleep.d/01grub suspend suspend: not applicable.
/usr/lib/pm-utils/sleep.d/11netcfg suspend suspend: success.
/usr/lib/pm-utils/sleep.d/49bluetooth suspend suspend: not applicable.
/usr/lib/pm-utils/sleep.d/55NetworkManager suspend suspend: success.
/usr/lib/pm-utils/sleep.d/75modules suspend suspend: not applicable.
/usr/lib/pm-utils/sleep.d/90clock suspend suspend: not applicable.
/usr/lib/pm-utils/sleep.d/94cpufreq suspend suspend: success.
/usr/lib/pm-utils/sleep.d/95led suspend suspend: not applicable.
/usr/lib/pm-utils/sleep.d/98smart-kernel-video suspend suspend: not applicable.
/usr/lib/pm-utils/sleep.d/99laptop-mode suspend suspend: success.
/usr/lib/pm-utils/sleep.d/99video suspend suspend: kernel.acpi_video_flags = 0
Allocated buffer at 0x11000 (base is 0x0)
ES: 0x1100 EBX: 0x0000
success.
Tue Apr 6 17:51:49 EDT 2010: performing suspend
Tue Apr 6 17:52:01 EDT 2010: Awake.
Tue Apr 6 17:52:01 EDT 2010: Running hooks for resume
/usr/lib/pm-utils/sleep.d/99video resume suspend:

Hello Ipha,
If you check the post http://bbs.archlinux.org/viewtopic.php?id=95328 you will see I am currently having a very similar problem with ATI instead of Nvidia: with KMS enabled I could not properly suspend.
I disabled KMS and then I can properly suspend but still having issues to resume: I get the screen on and can see the mouse pointer fine but nothing else except a black background. At this point, if I switch to console and kill the Xorg process then graphics start again inmediately with new Xorg process.
I am still looking for a a solution for this issue. After resume, could you please check if you can switch to console and and then kill the Xorg process?? Lets see what happens. If we are having the same issue, I would start thinking the blackscreen problem could be related to Xorg instead of ATI or Nvidia modules.
Looking forward for your feedback,
Daniel.

The html select box option is not getting displayed properly in IE11

The html select box option is not getting displayed properly in IE11
I have developed a website that has a select box drop down. The select box drop down is getting displayed properly in IE9. But in IE11, if I am selecting any option apart from the first one, the whole select box option is getting moved up in the page.
In IE11, if option 2 is selected, then the select options is getting moved up. But in IE9, if option 2 is selected, then the select options is getting displayed properly.
Please let me know the fix so that the select options are displayed in the same manner as in IE9.
Sorry but I am unable to upload images as this site is throwing some error

Hi Kevin Shen,
Thanks for post.
I tried above code in ie 11(version 11.0.9600.17633).
But it is not working. If you select option 2, and open select box then it open on the select box.
It should open below the select box.
Code for above:-
<select>
<option>1</option>
<option>2</option>
<option>3</option>
</select>
Sorry I could not attach screen shot. We have normal select box with three options. If we select option 2, it is showing option list on the select box. It is coming below the select box in ie 10 and other browse like chrome.
So what we should do, so that all options will come below the select box?
Thanks,
Yogesh Toke

Catalog id is not getting displayed properly in Foreign Language (French)

Hi All,
I have created a web service id for the external catalog and I have assigned the same to one of the user. The name of the web service id is getting displayed properly in the shopping cart creation screen when the language is English. But when we are changing the user language to Foreign language (French), the name is not getting displayed properly.
Could you please advise me if there any settings needs to be done in the parameters of the specific web service id. Thanks in advance for your help.

Hi,
Go to External Web Services and the select the web service ID. Then click on GOTO >Translation and select the language and enter the description of the web service as to be disaplyed while users log in French against the language.
Thanks,
Anshu

Photoshop CS4 Brushes not Anti Aliasing properly

I've just set up CS4 and my brushes are not anti aliasing properly. There are no soft edges on any of them. I'm able to get a pressure sensitive opacity change on the stroke but the edges are all pixelated.
Here is an image (this is a soft brush. notice none of the feathering/anti aliasing is there):
http://craji.com/images/adobeproblem.jpg
I've updated the newest gpu drivers for my Nvidia 8800 GTS.
I'm running XP SP3 with dual monitors. An Apple 30" and a Cintiq 21"
I've tried placing the main photoshop window on both monitors (one at a time) to test if that was causing it and i've had no luck.
All of the options in my GPU Enabled are currently unchecked (since they were giving me lag issues on my brush stroke when they were checked).
Any help (even linking me to something similar in this forum) is greatly appreciated.
Cheers-

Definitely not file dependent. I'll open a photo in sRGB 8bit, or create a new document with any settings from cmyk/rgb/bw 8/16 etc.
I'm wondering if it has something to do with my Nvidia Display Property utility. I use it to gamma up my secondary monitor (cintiq). Although disabling that utility didn't resolve it..
I'll try uninstalling and reinstalling tonight if no one is having similar problems. Maybe that will fix it.

When I convert my pdf doc to word, the fonts go really weird and it also puts some text into boxes. when I try to select the test and change the font, it does not change it properly?

When I convert my pdf doc to word, the fonts go really weird and it also puts some text into boxes. when I try to select the text and change the font, it does not change it properly? This is making it impossible to amend.

Hi Janedance1,
If the PDF that you converted already has searchable text, please try disabling OCR as described in this document: How to disable Optical Character Recognition (OCR) when converting PDF to Word or Excel. (If the PDF was created from a scanned document and doesn't already have searchable text, disabling OCR isn't a great option, as the text won't be searchable/editable in the converted Word doc.)
Please let us know how it goes.
Best,
Sara

Task activities not getting generated properly in BPEL

I am using the Jdev 11g TP3 (from OTN). Installation went through fine. However I observed a interesting issue with HumanTask/BPEL and I was wondering if someone faced similar such problems before, if so, how to rectify the issue. Here is the description of the issue:
1. Created a Empty SOA composite project
2. Dragged and dropped BPEL Process in the component palette. Designed a Asynchronous process.
3. Dragged and dropped a HumanTask. Did not expose as an composite. Designed a single approver workflow. In the project schema, choose the schema from BPEL input.
4. Wired BPEL to HumanTAsk
5. In the BPEL flow, I dragged the HumanTask to the flow. Everything appears to be correct. I clicked on "Ok" after associating with BPEL variable.
Now when I examine the BPEL flow, a scope before the BPEL switch is empty. There are no BPEL activities generated. This is a very simple case of BPEL and HumanTask and I am not sure as to why the tasks not getting generated properly in BPEL flow.
Has anyone experienced this issue or any ideas as to why this could happen?

After going through the exercise several times, I finally found out the reason as to why the BPEL activities are not getting generated. In the Human task form for the title, since it is a fixed string in my case I put something like the one given below:
Title : "APPROVE ORDER"
When you have fixed string within double quotes it does not generate BPEL activities correctly. You can try and u will see the problem.
My real question is should not throw proper error message when you try to drag and drop the HumanTask to BPEL flow.

View in edit window not getting updatet properly

Hello
I have some problems with the view in the edit window not getting updatet correctly. I noticed this in spectral view. For example, when I zoom in very much, so I only see about 3 seconds of audio and then select one second of audio and do a time stretch, so it will be two seconds of length, the windows does not update properly.
Normally the audio behind the strechted selection should move backwards, but often the strechted portion just sort of overlaps it and it doesn't move. When I zoom out and then back in, it seems to be ok.
I also have had very weird behavior when trying to remove clicks, with the view also getting pretty messed up.
Does anyone have similar problems with the view not getting updated properly?
I am running german windows xp, audition is installed in english. I first thought that installing it in english instead of german solves the problems, but unfortunately it didn't.
Greetings

Hello again
I made a movie of this behavior:
https://share.ols.inode.at/4NNYXR4HT2CJI5IHY273R9NRHRW9OLGR95Q7VTOP
It shouldn't look like that, right?
Greetings

Upgraded to 11.1.4.62. Now iTunes is saying "An iPod has been detected, but could not be identified properly. Disconnect then reconnect ..." I removed iTunes and reinstalled. I stopped and started the service. I reset the iPod. When I put it in disk

I upgraded to 11.1.14.62 this morning. Not iTunes is saying "An iPod had been detected but could not be identified properly". I unlugged/replugged in. I reset the iPod, I removed iTunes and reinstalled. I'ver tried three different cables.
When I put the iPod in disk mode it shows up briefly as a disk then goes away.
Any ideas?

Hi there - I've spoken with Apple and here is their response (worked for me). You need to uninstall not only iTunes, but also (in this order):
1) iTunes
2) Apple Software Update
3) Apple Mobile Device Support
4) Bonjour
5) Apple Application Support
Then you restart your computer.
Then you install the latest version of iTunes (which will reinstall all those things you uninstalled).
Then you restart your computer again.
Mine is working perfectly again now.
I hope it works for you,
Carmen.

My fourth generation ipod touch is not turning on properly. It is plugged into the computer but when i unplug it it just shows that it needs to be plugged in. Please help!

I recently downloaded something for my ipod. Now it will not turn on properly. Can someone please tell me how to turn it back on please.

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

Itunes states "ipod detected but could not be identified properly" when I plug in my new nano. tried uninstalling/reinstalling itunes 6 times - get pop-up "itunes helper error" with abort, retry, ignore options. retry doesn't work

I am trying to connect my new nano to my iTunes account. I keep getting msg "ipod detected but not identified properly. disconnect and reconnect. if problem persists uninstall/reinstall iTunes". I've uninstalled/ reinstalled iTunes 6 times but keep getting the same msg.
when installing iTunes I get a pop-up "iTunes helper error" check access. with options to abort, retry, ignore. retry doesn't work. ignore installs iTunes but it doesn't recognize my nano. abort shuts down the download.
how do I fix these problems??

Hello, KenaiK9.
Thank you for visiting Apple Support Communites.
I see you are receiving an error and have processed some troubleshooting steps with the issue persisting. There are just a couple more in the article below that covers this specific error.
iPod nano: Error message saying that iPod could not be identified properly
Cheers,
Jason H.

Pm-suspend not waking up properly

Similar Messages

Maybe you are looking for