PM-WCM Work Clearance Management transactions vu00EDa Web Dynpro

Hi All,
We are facing the task of exposing WCM functionality vía Web using Web Dynpro. WD Java needs RFC functions to access ERP data.
We have some problems because there is no API (SE37 RFC Function Modules) for WCM objects.
There are some function groups WC*, but are dynpro oriented and many are not useful to Web Dynpro.
Any experience in similar tasks related to WCM would be of much help.
Best Regards and many thanks,
Jorge Linares

Hello Jorge,
I have a similar requirement. What did you do in the end? Did you create your own "BAPIs"?
Regards
Andrew Barnard

Similar Messages

Work Clearance Management (WCM) not available with ECC 6.0

Hi All,
Work Clearance Management (WCM) is a part of SAP Plant Maintenance (PM). It is a standard functionality. This is not available with our installed version of ECC 6.0 system.
The navigation should be
SAP Easy Access > Logistics > Plant Maintenance > Work Clearance Management.
This is also not available on SPRO.
But whenever we directly enter the T Code related to WCM, it allows me to go to that screen. But if we want to customize the WCM using the same method then the SAP standard configuration is missing.
I need to get this functionality available on our system.
Is it a part of SAP software component SAP_APPL ?
But how do I get this ?
Can anyone pls help me on this ?
Thanks and warm regards
Purnendu

I think that WCM it's present as an extension set (i'm not quite sure if is EA-PLM or EA-SCM). When you configure it, the activities related in custominizg, will appear as well.
Hope this help
Ezequiel

Work clearance management tab not displaying

Hi all,
As per my knowledge under SAP menu under plant maintenance there comes a link for work clearance management after Information system.
But its not showing in my system.What could be the reason for it.
I am attaching the screen shot of my system and other system taken by from my friend
Thanks
Vivek Varun

Hi Vivek,
This is add on component in SAP , need to activate the WCM component.It will not appear in the sap easy access screen until it is activated.
Ask your basis team to activate the WCM component, then only you can see the WCM nodes.
Transaction Code for activation of add on components in SAP is SFW5
Best Regards
Kalyan

Work Clearance Management ERROR

Hi,
I have configured WCM, now I have generated Maintenance Order and have also issued Permit against the same, now when i click WC Application in IW32 then click create, it is giving this ERROR --Error during loop using the internal table (L_WCCLTAB), Error when executing function (WCFC_WCVLTAB_GET).
Please Guide
Thanks
DM

Hello,
I expect this is due to incomplete WCM print configuration.
Check IMG path: Work Clearance Management - Master Data - Print Control.
-Paul

Work Clearance Management

Hi,
I want to know what are the configurations required for Work Clearance Management & also let me know how maintenance order can be linked with WCM. I have gone throu SAP help link. I want with the t-codes.
Thanks in advance.
Regards,
Maheswaran.

Hi Shikha,
I require the setting that u have done.
Please check two more things
1. for the permits that u created thro IPMD have u done the settings for WCM -> Approvals -> Enhancements . This node is necessary. It might be that u have not maintained assign approval having automatic assignment tick.
2. If u have done above setting please confirm the permit categoris that u r using for the permits, are they same??
Sanjeev

Plant Maintenance and Work Clearance Management

Where can i find functionality info on Plant Maintenance and Work Clearance Management. How can these functionalities be activated - is there a switch?

Please go thr below SAP Help links for Plant Maintenance and Work Clearance Management.
http://help.sap.com/saphelp_47x200/helpdata/en/2b/1b713896fab752e10000009b38f889/frameset.htm
http://help.sap.com/saphelp_47x200/helpdata/en/2b/1b713896fab752e10000009b38f889/content.htm

Work Clearance Management SIM files

hi,
can you help to find sim files for Work Clearance Management .
Regards

Try this
http://help.sap.com/bp_utilitiesv1500/UTL_India/html/U75_EN_IN.htm
regards, IA

Mobile Work Clearance Management

Hi,
has anyone in here some experience with the xMAM addon " Mobile Work Clearance Management" and can tell me something about, like how to get it working, and so on?
Thank you and regards,
Florian

Hi Florian,
This is a brand new functionlaity. I am 99% sure there is no experience in this area. Not sure what documents are publicly available. If you tell me what you have I can check if I have any more documentation and mail it to you.
To make it work - as far as I remember it is a usual add-on to MAM that you deploy similar to gis or signature capture.
Cheers,
Larissa Limarova

Floor Plan Manager Technique in Web Dynpro for ABAP

Hi Experts,
Road map technique and Floor Plan Manager Technique, both are same or different.
I need to develop a web dynpro application based on Floor Plan Manager Technique. can I develop this application in WebDynpro for ABAP. If so please help me how to use Floor Plan Manager Technique in Web Dynpro for ABAP.
I don't have knowledge in java, so i cann't develop this application in web dypro for java.
Please help me.
Thanks & Regards
Sridhar

>Road map technique and Floor Plan Manager Technique, both are same or different.
They are different. The FloorPlan Manager is a tool for constructing WD applications with a similar layout and user interface. There are two different floor plans currently - the OIF - Object Instance Floorplan and the GAF - Guided Activity Floorplan. The OIF is for the editing of a single business object. It allows for things like the nesting of header and item details. The GAF, on the other hand, uses a road map to walk you through an activity - much like a Guided Procedure. The FloorPlan Manager is very powerful because it can be configured using component and application configuration - allowing you to plug in different UI Building Blocks (UIBB) as Web Dynpro Components or Views. You can change the roadmap, for instance, adding a new step by just chaning this configuration and not having to touch the code. Consistency between applications is also a major stregth of the FloorPlan Manager.
The Road Map is just a UI element in WD. It can be used to create your own custom applications.
>can I develop this application in WebDynpro for ABAP
Sure. The Floorplan manager has been available for WDA since SPS13. Have a look at the packages APB_FPM_DEMO and ABP_FPM_TEST for examples of how to build components designed for the FloorPlan Manager.
Admittedly there aren't a whole lot of documents available on the subject yet. Some eLearning is being worked on now. There are going to be some workshops at TechEd on the subject:
https://wiki.sdn.sap.com/wiki/display/Community/BringitallTogetherwithFPM%28FloorplanManager%29forWebDynpro+ABAP
The best thing to do right now is to study the demo applications SAP provides.

Passing parameters to Transactions from Web dynpro Application through ITS

Hi,
i need to call a transaction from Web dynpro through ITS. On action from web dynpro application, i am concatenating the respective parameters mentioned below along with URL. The problem is one parameter(VARIANT) is being passed to the t-code CAT3 correctly. The next mandatory parameter(PERNR) is not passed to the respective field.Here is the URL Code:
CONCATENATE 'http'
'://' host ':' port
'/sap/bc/gui/sap/its/webgui/?sap-client=&~transaction=' 'CAT3'
'%20TCATST-VARIANT=' lv_name2 '&CATSFIELDS-PERNR=' lv_name1 INTO url.
Called T-Code CAT3
Passing Parameters are:
Data Profile TCATST-VARIANT
Pernr: CATSFIELDS-PERNR

Pradeep,
iam trying to pass values from webdynpro application to SAP GUI Transaction
here is the sample code which iam using
CONCATENATE 'http://s0164dep01.adta.uae:50000/irj/portal/interop?NavigationTarget=pcd:portal_content/Testing/trn_iw33?'
'%20CAUFVD-AUFNR='
             'ApplicationParameter=CAUFVD-AUFNR='
              lv_workorder';'
          'DYNP_OKCODE=SHOW'
         INTO lv_url.
i could'nt able to succed as its displaying page not found exception.
Help me on this to proceed further
Regards
Jaipal.E

Call Transaction in Web dynpro

Hi friends ,
how to call the sap transaction in web dynpro abap.
I am using the function module
CALL FUNCTION 'ABAP4_CALL_TRANSACTION '
EXPORTING
tcode = 'VA01'
in web dynpro abap
but i am getting error like fill all the required filed
please give suggestion.
Regards ,
krishnan R.

Hi Krishnan,
You cannot call a transaction from WebDynpro ABAP. You can instead create an transactional iView in the portal. Go through this link for further information.
[http://help.sap.com/SAPHELP_NW04S/helpdata/EN/18/f96f4132f15c58e10000000a1550b0/frameset.htm|http://help.sap.com/SAPHELP_NW04S/helpdata/EN/18/f96f4132f15c58e10000000a1550b0/frameset.htm]
There are already many similar threads over the issue of calling a transaction from WebDynpro ABAP. Please try run a search in the previous forum threads. Below are a few such threads:
[https://forums.sdn.sap.com/click.jspa?searchID=18250003&messageID=5345700|https://forums.sdn.sap.com/click.jspa?searchID=18250003&messageID=5345700]
[call Transaction thru WB4A.|call Transaction thru WB4A.]
Regards,
Uday

Handle transaction in web dynpro

Hi,
How to handle transaction in web dynpro applications which is using Adaptive RFC model ?
Thanks,
Teja

Hello Teja,
Please refer tutorial at https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/d352a790-0201-0010-5082-b1a608d22b6c.
I hope it will help u to understand transaction handling in wd.
Best Regards,
Pankaj Sharma

Handle transaction in web dynpro applications

Hello,
can you please tell me How to handle transaction in web dynpro applications which is using Adaptive RFC model ?
Thanks,
Teja

Hi,
please see this [thread|Link to SAP Transaction using WebDynpro for Java;
regards,

Create Transaction for web-dynpro ABAP

hi
Can you help me in creating a transaction for web-dynpro ABAP.
thank you.

If you want a SAPGUI transaction code that will launch your Web Dynpro ABAP application then I suggest creating a parameter transaction code that wraps around the SAP standard transaction code WDYID. You can use the parameter STARTMODE to decide if you launch your browser within the SAPGUI window or if it opens a new browser window. You will get SAPGUI based Single Sign On with this transaction code as well. Here is an example of a TCode I setup:
http://www.flickr.com/photos/tjung/2758987559/
And here is what it looks like when running in place within the SAPGUI:
http://www.flickr.com/photos/tjung/2758987583/

Approvals in Work Clearance Management

Dear PM Experts,
How can I do next:
Approvals in WCM-objects are derived from the master record of the reference object or from the maintance order, that is assigned to the work clearance application.
If I can't do it, please, make your comments about my problem.
Kind regards,
Molchun

Hello Sebastian,
Thanks for those inputs and my apologies for not puttin up clear screen shots.I have tried to get clearer ones this time round.
In the configuration the approvals are mandatory; also the tables WCALA and WCALQ have the entries for the respective documents.
I tried to replicate one scenario wherein the work approval is red and the rest of the documents (work applicationa nd WCD) are green. I could achieve by revoking the permit using the traffic light. I am not able to replicate the other scenarios, though.
Please let me know your observations; my hunch is that after completing the tagging process the user is trying to fiddle with the permit.
thanks,
Beryl

PM-WCM Work Clearance Management transactions vu00EDa Web Dynpro

Similar Messages

Maybe you are looking for