Pm01 steps

Hi All,
can anyone send me the steps involved in pm01 transaction for creating new infotype.
regards,
kumar

Hi Kumar,
Please check the following thread:
https://forums.sdn.sap.com/click.jspa?searchID=22324315&messageID=4707220
Also check the following wiki page :
https://wiki.sdn.sap.com/wiki/display/Snippets/EnhanceInfotypesusingPM01inECC6.0
Regards,
Dilek
Edited by: Dilek Ersoz on Feb 16, 2009 8:02 AM

Similar Messages

How to Create infotype views through pm01

I need to create a view for infotype 21. There is a tab for creating infotype views in pm01 transaction. but not sure how to use it. There are fields such as 'additional IT' and 'View'. Not sure what needs to be filled in these fields. I have created the structure for my view(PS0955). Can somebody help me out with this?

Well what I meant by view was to create a new infotype but it won't be maintained in standard way through pa30. It is basically a view (infotype with some subscreen) that will be called on existing infotype screen (in my case IT0021). So instead of modifying the standard infotype 21 screen I can append my desired fields to this through view.
Well my issue now has been resolved. But now I have yet another issue.
I want to create my own screen for existing infotype. For that I know that I have to copy the existing standard screen 2000 and rename it to some other number. However, i want to know what is the exact procedure. What are the other steps involved with it. Any body can help?

Photograph and PM01

How to upload the Photograph of the applicant using
OOAD transaction?
I need step by step procedure if possible.
Give me any example for when we create a custom infotype
using PM01?
Kindly and quickly do favour to me friends.
Mark:5

For the picture load...This site gives step-by-step for both older and newer versions....enjoy!
for 4.7 and up...
http://www.sd-solutions.com/documents/SDS_Employee_Photos_v4.7.html
for 4.6....
http://www.sd-solutions.com/documents/SDS_Employee_Photos_v4.6.html
As for custom infotype via PM01....
step-by-step with pictures..
http://www.sapdevelopment.co.uk/hr/hr_infotypes2.htm
step-by-step info...
http://www.sapfans.com/forums/viewtopic.php?t=142405&view=previous&sid=41b52c000838ea9f0656ad1874291abb
more info on PM01...
1) Go to Transaction PM01. 2) Enter the custom Infotype number which you want to create (Should be a 4 digit number, start with 9). 3) Select the Employee Infotype radio button. 4) Select the PS Structure Infotype. 5) Click on Create A separate table maintenance window appears 6) Create a PS structure with all the fields you want on the Infotype 7) Save and Activate the PS structure 8) Go back to the initial screen of PM01. 9) Click on All push button. It takes a few moments. 10) Click on Technical Characteristics. Infotype list screen appears 11) Click on Change(pencil) button 12) Select your Infotype and click on Detail (magnifying glass) button 13) Give T591A as subtype table 14) Give T591S as subtype txt tab 15) Give your subtype field as subtype field 16) Save and come back to PM01 initial screen 17) Click on Infotype Characteristics Infotype list screen appears 18) Click on Change (pencil) button 19) Click on New Entries 20) Enter your Infotype number and short text 21) Here we have to set different Infotype Characteristics as per the requirement. (Better open another session with some standard Infotypes infotype characteristics screen and use as the reference to fill yours) 22) Save your entries. 23) Now the Infotype is created and ready to use. 24) If you want to change the layout of the Infotype as per your requirement 25) In the PM01 initial screenSelect Screen radio button and give 2000 as the screen name, then click on edit. 26) In the next screen.. Select Layout Editor and click Change. 27) Screen default layout appearshere you can design/modify the screen..change the attributes of the fields..etc. 28) Save and activate. (Dont forget to Activate at every level)

How Create infotypes with both transaction pm01 and ppci

HI Gurus,
I need create custem infotypes by using the pm01 and ppci .
requirement is i need to create two custem infotypes with subtyeps in personal administration and personal planing .
1.can any provide step by step in to create the custem infotypes in pm01 and ppci.
2. how to create sub types also.
Regards
Ramesh.
Thanks in advance

Steps to create a HR Infotype:
1) Go to Transaction PM01.
2) Enter the custom Infotype number which you want to create (Should be a 4 digit number, start with 9).
3) Select the 'Employee Infotype' radio button.
4) Select the 'PS Structure Infotype'.
5) Click on Create... A separate table maintenance window appears...
6) Create a PS structure with all the fields you want on the Infotype
7) Save and Activate the PS structure
8) Go back to the initial screen of PM01.
9) Click on 'All' push button. It takes a few moments.
10) Click on 'Technical Characteristics'. Infotype list screen appears
11) Click on 'Change'(pencil) button
12) Select your Infotype and click on 'Detail' (magnifying glass) button
13) Give 'T591A' as subtype table
14) Give 'T591S' as subtype txt tab
15) Give your subtype field as subtype field
16) Save and come back to PM01 initial screen
17) Click on 'Infotype Characteristics' ... Infotype list screen appears
18) Click on 'Change' (pencil) button
19) Click on 'New Entries'
20) Enter your Infotype number and short text
21) Here we have to set different Infotype Characteristics as per the requirement. (Better open another session with some standard Infotype's infotype characteristics screen and use as the reference to fill yours)
22) Save your entries.
23) Now the Infotype is created and ready to use.
24) If you want to change the layout of the Infotype as per your requirement...
25) In the PM01 initial screen...Select 'Screen' radio button and give 2000 as the screen name, then click on edit.
26) In the next screen.. Select 'Layout Editor' and click 'Change'.
27) Screen default layout appears...here you can design/modify the screen..change the attributes of the fields..etc.
28) Save and activate. (Don't forget to 'Activate at every level)

Step-by-Step Help Needed for Deploying Some Adobe Software

We are a K-12 educational institution. I am currently working at setting up a computer lab with about 16 MacMini computers.
I'm VERY new to the realm of servers, deployment, using terminal, etc.
I've done lots of research to make it to where I am, but just can't wrap my head around what needs done next with the Adobe products.
I am using Server OSX (v3) and DeployStudio (v 1.6.3) to try and manage the computers.
Both my server and clients are running Mavericks 10.9.
I deployed my core images successfully and would like to now send Adobe products only the computers I choose since I have limited licenses.
We have volume licenses of Adobe InDesign CS6 and Photoshop Elements 12 that we would like to deploy.
I have been referencing the following sites, but just can't seem to wrap my head around the EXACT steps that need to be taken.
http://blogs.adobe.com/oobe/2010/10/adobe-provisioning-toolkit-enterprise-edition.html
http://helpx.adobe.com/creative-cloud/packager/provisioning-toolkit-enterprise.html
http://helpx.adobe.com/photoshop-elements/kb/silent-install-instructions-photoshop-element s2.html
http://forums.adobe.com/message/5781663
For Adobe InDesign CS6 - I've done the following:
Created an "Installation Package" using Adobe Application Manager Enterprise Edition (AAMEE v6.2.112.0) using the following instructions.
http://wwwimages.adobe.com/www.adobe.com/content/dam/Adobe/en/devnet/creativesuite/pdfs/Ad obeApplicationManagerEnterpriseEditionDeploymentGuide_v_3_1.pdf
If I log into the client computer, put the package ON the client computer, and run it...it takes me through the install and works wonderfully.It's not automated like I wanted/thought I set it up to do. I have to click through the steps of the installer.
If I try to deploy it using the "Package install" Workflow in DeployStudio...it loads it during the workflow, then skips through it, acts like it installed it, but it isn't actually installed.Is there a setting that I need to possibly change somewhere?
For Adobe Photoshop Elements 12 - I'm a bit lost and mostly just have questions:
I know that I can't use AAMEE and need to use APTEE (Adobe Provisioning Toolkit Enterprise Edition).
How do I deploy the software? Create my own Package using PackageMaker?
Which computer do I run APTEE on? All the instructions I can find just say, "do this" - but don't specify where.
Do I have to open terminal and run the commands on each client computer AFTER installing PE12?
OR
Do I run the commands BEFORE deployment on my package stored on my server that is ready for deployment?
It really comes down to me just not 100% understanding how APTEE works.
I hope that pertrays my dilemma. I've tried to explain best I can. If you have any questions - let me know!
Thanks in advance for any insight you can give!

We are a K-12 educational institution. I am currently working at setting up a computer lab with about 16 MacMini computers.
I'm VERY new to the realm of servers, deployment, using terminal, etc.
I've done lots of research to make it to where I am, but just can't wrap my head around what needs done next with the Adobe products.
I am using Server OSX (v3) and DeployStudio (v 1.6.3) to try and manage the computers.
Both my server and clients are running Mavericks 10.9.
I deployed my core images successfully and would like to now send Adobe products only the computers I choose since I have limited licenses.
We have volume licenses of Adobe InDesign CS6 and Photoshop Elements 12 that we would like to deploy.
I have been referencing the following sites, but just can't seem to wrap my head around the EXACT steps that need to be taken.
http://blogs.adobe.com/oobe/2010/10/adobe-provisioning-toolkit-enterprise-edition.html
http://helpx.adobe.com/creative-cloud/packager/provisioning-toolkit-enterprise.html
http://helpx.adobe.com/photoshop-elements/kb/silent-install-instructions-photoshop-element s2.html
http://forums.adobe.com/message/5781663
For Adobe InDesign CS6 - I've done the following:
Created an "Installation Package" using Adobe Application Manager Enterprise Edition (AAMEE v6.2.112.0) using the following instructions.
http://wwwimages.adobe.com/www.adobe.com/content/dam/Adobe/en/devnet/creativesuite/pdfs/Ad obeApplicationManagerEnterpriseEditionDeploymentGuide_v_3_1.pdf
If I log into the client computer, put the package ON the client computer, and run it...it takes me through the install and works wonderfully.It's not automated like I wanted/thought I set it up to do. I have to click through the steps of the installer.
If I try to deploy it using the "Package install" Workflow in DeployStudio...it loads it during the workflow, then skips through it, acts like it installed it, but it isn't actually installed.Is there a setting that I need to possibly change somewhere?
For Adobe Photoshop Elements 12 - I'm a bit lost and mostly just have questions:
I know that I can't use AAMEE and need to use APTEE (Adobe Provisioning Toolkit Enterprise Edition).
How do I deploy the software? Create my own Package using PackageMaker?
Which computer do I run APTEE on? All the instructions I can find just say, "do this" - but don't specify where.
Do I have to open terminal and run the commands on each client computer AFTER installing PE12?
OR
Do I run the commands BEFORE deployment on my package stored on my server that is ready for deployment?
It really comes down to me just not 100% understanding how APTEE works.
I hope that pertrays my dilemma. I've tried to explain best I can. If you have any questions - let me know!
Thanks in advance for any insight you can give!

HT203167 A movie I purchased in the iTunes store is missing. It isn't hidden and doesn't show up in search. I've followed support steps. Where is it and how do I find it? I believe I originally purchased the film on my 1st Gen AppleTV.

A movie I purchased in the iTunes store is missing. It isn't hidden and doesn't show up in search. I've followed support steps. Where is it and how do I find it? I believe I originally purchased the film on my 1st Gen AppleTV...other movies show up. Help.

It was Love Actually. It's been in my library a few years but is now missing. It's odd...it isn't even in the iTunes Store anymore. I think there is a rights issue because a message appeared in the store saying it wasn't available at this time in the U. S. store. Still, if I bought it years ago it should be in my library or I should get a refund....

Hello I am experiencing some problems for my iMessage and FaceTime. I did the steps the Apple provided online and I still can't get it to work. My updates are up to date. Everything is working fine it's just that the Apple iMessage won't except anyth

hello I'm experiencing some problems with my iMessage and face time. I did with Apple provided me online. I did the steps. Nothing will work, it keeps saying activation turn on Wi-Fi when my Wi-Fi is turned on. As soon as I got this on Christmas. iMessage and FaceTime have not been working. My Apple and ID password are correct. Everything else is working fine. My iOS updates are up to date, everything is fine except FaceTime and iMessage

Did you try everything here?
iOS: Troubleshooting Messages
Using FaceTime and iMessage behind a firewall
iOS: Troubleshooting FaceTime and iMessage activation
FaceTime, Game Center, Messages: Troubleshooting sign in issues
In the future saying your tried the Apple on-line articles does provide us with information as to which ones you found and tried

Report generation toolkit and signal express user step : problem of closing reference in "Stop" event

Hi all,
I'm trying to make a package of Vis to easily make Excel reports with Signal Express. I'm working on LabVIEW 8.2.1.
I'm using the report generation toolkit, so I build a .llb from my project which contains all the hierarchy of my steps, but also the hierarchy of dynamic VIs called.
I have made some steps, like "Open Workbook", "Write Data", etc.
My steps run well, excepts one step : "Close Workbook".
If my "Close Workbook" step is firing on "Run" Signal Express event, I have no error, so my reference is properly closed.
But if my "Close Workbook" step is firing on "Stop" Signal Express event, I have an error "1", from "Generate Report Objectrepository.vi".
I feel that I'm trying to use a reference which has been killed in the "Stop" step...
I would like to know what exactly do Signal Express on "Stop" event and why my close function does'nt run well.
Thanks,
Callahan

Hi Callahan,
SignalExpress (SE for short) does the following on the Stop event:
1. Takes the list of parameters that SE found on your VI's connector pane, and sets the values that the user set from the "Run LabVIEW VI" configuration page, if any.
2. Then tells the VI that SE is running the Stop event by setting the Enum found on your VI's front panel. This in turn should produce some boolean values telling your VI to execute the Stop case.
3. The VI is then run, with those values and states.
4. SE checks to see if any errors where returned.
5. Since this is the Stop event, SE releases the reference to the VI which it possesses.
Questions for you would be, is the reference to your Workbook linked to a control on your connector pane, or held in a uninitialized Shift Register. If it's held in a Shift Register, SE would not be aware of it, and would not be able to affect that reference.
Hope that helps. Feel free to post your LLB if it doesn't.
Phil

How can I display step info in User Interface with Tracing Disabled?

I'm trying to modify the CVI Operator Interface application to update the execute panel with some step information during the execution of the program. i.e. I want to display the measurement, high & low limits during the run WHEN TRACING IS DISABLED. (Doing this, when tracing is enabled is easy, all you do is access the step record that's been constructed (I can cope with that!))
I've successfully implemented a User defined execution event to signal the User Interface application when the current step is a result (using TS_UIMsg_UserMessageBase etc. I'm posting a UI Message in the Process Model under the ProcessModelPostStep so that I will only display if its a result step.) I've added a user defined
entry in the execute.c module execution event switch statement which will call a function in the exedisp.c module to update the display. However, I don't have a context to the step that I can use. (I can't use e.g. the exeRec record since this is only completed with the context if tracing is enabled.) I've got a handle to the correct panel to write the information to, but how do I get the context to the current step when tracing is disabled?
Regards,
Brian

Hi,
no problem - btw, if you wanted to acheive this in TS 1.x, you could always write to a local variable with the ActiveX reference for the step concerned, and then use the msg reference that you have in the OI within the UI Message handler, to dig through to the Execution ->Sequence File->Sequence->Locals, or Execution->Thread->SequenceContext (and you can get almost anywhere from that).
Hope that helps
S.
// it takes almost no time to rate an answer

I have one apple ID for multiple devices in my family. I'd like to keep it that way for itunes/app purchases. I would like a simple step 1, step 2, step 3 response on what I need to do to separate all other features like imessage, contacts, emails, etc.

I have one apple ID for multiple devices in my family. I'd like to keep it that way for itunes/app purchases. I would like a simple step 1, step 2, step 3 response on what I need to do to separate all other features like imessage, contacts, emails, etc.
I have been reasearching how to do this on the internet, but I haven't found an easy explanation yet. My family is going crazy over each others imessages being sent to others in the family and not being able to use FaceTime because of conflicting email addresses. I have read that if each person gets their own iCloud account, this would work. However, I need to know what to do after I set everyone up with their own iCloud account. Do I make that the default email address to be contacted or can they still use their hotmail email addresses. Any help- with easy explanation- would be much appreciated!!

We do this in my family now. We have one account for purchases, so it is used to share music and apps (I think that is in Settings/iTunes & App Stores). Each iDevice has this configured.
Then, each of us has our own iCloud account that is configured under Settings/iCloud. That then allows us to have our own Mail/Contacts/Calendars/Reminders/Safari Bookmarks/Notes/Passbook/Photo Stream/Documents & Data/Find My iPhone/and Backup. That Backup piece is pretty sweet and comes in handly if you replace your iDevice. You can just restore from it.
So we all share the Apple Store account but we all have our own iCloud accounts to keep the rest seperate or things like you mentioned are a nightmare.
In answer to what iCloud does for you: http://www.apple.com/icloud/features/
Think of it as an internet based ("cloud") area for all of those items listed in my response. What you need to remember is photo stream only maintans the last 1000 pictures so don't count it as a complete backup solution for your pictures. Even though I rarely sync with a computer these days, I do still try to sync my phone with iPhoto (I have an iMac) so that I have copies of all of my pictures. 1000 may not stretch as far as it sounds.
Message was edited by: Michael Pardee

FM to read the different steps in workflow and the status at each step

Hi All,
Is there any FM in SAP which gives the detail roadmap of the steps taken in a workflow and the diffrent status or decision at each step.
I am looking for something like what you see when you click on the "STARTED WORKFLOW" in the business workplace outbox.
Which shows up the "steps in the process so far " and the decision and the agents for each of them.
Thanks,
Charan.

Hi,
You can get the status according to the task. please check with FM "SAP_WAPI_GET_WI_DELTA".
Regards
SM Nizamudeen

Error occurred in deployment step 'Add Solution': A timeout has occurred while invoking commands in SharePoint host process.

Hi,
I am deplyoing a solution which has custom web parts- vwp- appln pages, event receivers.
It was working fine till last week. I was able to deploy the solution and able to see the web parts and func. was working.
But now from the last 2 days onwards, when I tried to depoy this soution, I am getting the error
"Error occurred in deployment step 'Add Solution': A timeout has occurred while invoking commands in SharePoint host process "
may i know why am getting this error.
note: my dev machine- Win Srvr 2012 - VS 2012- SP 2013 - SP D 2013 was having soem issues with the space in C drive.
once i have done the index reset few months back and i started getting space in C:\ Drive is 0 bytes.
so what my infra. team has done is , increased the space in drive to 150 GB[ it was a VM ].
help is appreciated !

What is current disk space on your drives
Delete ULS logs and other log files from server id not needed
could be related to ChannelOperationTimeout
http://msdn.microsoft.com/en-us/library/ee471440(v=vs.100).aspx
Also, don't forget to restart Visual Studio
Goto the following regustry key: HKEY_CURRENT_USER\Software\Microsoft\VisualStudio\10.0\SharePointTools
Add the following as a DWORD (wont be there by default)
ChannelOperationTimeout
REG_DWORD that specifies the time, in seconds, that Visual Studio waits for a SharePoint command to execute. If the command does not execute in time, a SharePointConnectionException is thrown.
The default is 120 seconds.
http://social.technet.microsoft.com/wiki/contents/articles/21052.como-resolver-o-erro-error-occurred-in-deployment-step-activate-features-a-timeout-has-occurred-while-invoking-commands-in-sharepoint-host-process-pt-br.aspx
If this helped you resolve your issue, please mark it Answered

Error occurred in deployment step 'Activate Features': A timeout has occurred while invoking commands in SharePoint host process.

Error 1 Error occurred in deployment step 'Activate Features': A timeout has occurred while invoking commands in SharePoint host process.
0 0 myProjectAssetsLists
am getting the above error when i deploy my farm solution which is actually a "farm solution import package" template.
i am deploying this to a new site collection and once its features are activated this will provision few doc libs and splists in the targeted site.
any help is appreciated.

try below link:
http://msdn.microsoft.com/en-us/library/ee471440.aspx
http://sujeetrec.blogspot.in/2013/12/sharepoint-2010-deployment-timing-out.html
Increase the timeout that Visual Studio waits for SharePoint to deploy a feature:
Create: [HKEY_CURRENT_USER\Software\Microsoft\VisualStudio\10.0\SharePointTools] ChannelOperationTimeout DWORD
The value is a timeout in seconds. The default is 120 (2 minutes).
Full details on this switch and others are here:
http://msdn.microsoft.com/en-us/library/ee471440.aspx

Ipod not recognized by itunes...next step for nike+

when i started to set up the nike+ i downloaded the new version of itunes then later downloaded the new software update for the ipod nano...now when i plug the ipod into the computer using the usb cord, i get a message that says this...The software required for communicating with the iPod is not installed correctly. Please reinstall iTunes to install the iPod's software....i have attempted to install, reinstall, remove and install again, itunes and the updated software... yet it still will not recognize the ipod when it is plugged in. How do i get the ipod to be recognized and then what is my next step for using the Nike+ shoes?
ipod nano

I can't even get the tab that says Nike+ when I am trying to sync up. I can't get it to even go on to the Itunes. I can purchase music no problem

HP OfficeJet 6500 E709a: cannot scan from Windows 8.1; uninstall crashes at step 8 of 10

When I try to scan from Windows 8.1, launched from the HP Solution Center, it fails before giving me a preview, saying:
Scanning error
4,[(2,22,80040001),(3,22,0)]
When I run the HP Print and Scan Doctor and select "Fix Scan", it fails on the first check, saying it failed to find the driver. The text field that gets uploaded to HP includes the string "hpbxpsrender.dll: Not Found".
I tried uninstalling, using uninstall.bat in the "OJ_AIO_6500_E709_EntScruber_140" (HP OfficeJet Enterprise 14.0), which I downloaded from HP.com. It gets to step 8 of 10 ("removing unnecessary components..."); then it hangs and Windows 8.1 says "HP Installer Uninstaller has stopped working" and kills it.
I have tried running uninstaller in regular mode, in regular mode with my anti-virus / firewall (Kaspersky) paused (disabled), and in Safe Mode with Networking. Same result every time.
I have run the Installer without error. I can view the HP OJ status web page in my browser (http://192.168.1.5) from both computers.
I don't remember if scanning has ever worked on this computer. Scanning works on another computer (Windows XP). Both computers are wired (Ethernet) to the same network switch as the HP OJ.

Hi DonaldPayne,
Welcome back to the HP Support Forums! I see you are not able to scan to your HP Officejet 6500 with your computer running the Windows 8.1 Operating system. You have tried to uninstall the software but get an error message. I see you have done ALOT of troubleshooting already, thank you for that, this allows me to see what has failed for you.
I would like you to continue here and complete the steps listed below:
1. Press the Windows key + R on the keyboard to bring up the run menu.
2. Type %programfiles% in the run field and click OK.
3. Delete any HP/Hewlett Packard folders.
4. Press the Windows key + R on the keyboard to bring up the run menu.
5. Type %programfiles(x86)% in the run field, and click OK. This is for 64 bit systems only.
6. Delete any HP/Hewlett Packard folders.
7. Press the Windows key + R on the keyboard to bring up the run menu.
8. Type %appdata% in the run field, and click OK.
9. Delete any HP/Hewlett Packard folders.
10. Press the Windows key + R on the keyboard to bring up the run menu.
11. Type %programdata% in the run field. 
12. Delete any HP/Hewlett Packard folders.
13. Press the Windows key + R on the keyboard to bring up the run menu.
14. Type regedit in the run field.
15. Delete any HP/Hewlett Packard folders or keys that you find. (backup the reg file b4)
16. Run Disk cleanup from Administrative Tools
17. Now run the HP Printer Install Wizard for Windows it was created to help Windows 7, Windows 8, and Windows 8.1 users download and install the latest and most appropriate HP software solution for their HP Printer.
18. If you run into any problems after installing using the PIW, now we can re run the HP Print and Scan Doctor- It was designed by HP to provide users with the troubleshooting and problem solving features needed to resolve many common problems experienced with HP print and scan products connected to Windows-based computers.
I will watch for your reply, please make note of anything that you run into as well as what the PSDR finds.
Thanks,
HevnLgh
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

Pm01 steps

Similar Messages

Maybe you are looking for