PM06 capital order release error
HI Guys,
I have created the PM06 capital order for the functional location and when I try to release the order I'm getting error message like this
"You cannot use asset class 4001 for capital-investment measures
Message no. AY106"
Diagnosis
You have selected the asset class 4001 for automatically creating an asset under construction for a capital investment measure. Asset class 4001 cannot be used for this function.
Procedure
Choose an asset class that is marked for capital investment measures, or set the appropriate indicator in the master record for the asset class.
I coudn't understand exactly what it is for but I didnt tied up the asset number in functional location, also choosen the cost center which is created for settling cost for capital investment order. Whether I need to settle only to WBS element as this is capital project but I dont think so, your comments please.
In config: I have define the scheduling parameters and also did teh config related to order type assignments
What need to to be done for executing the capital project and settling the cost. Please could you please throw light on this. Thanks in advance.
Choose Proper Asset Class Instead of 4001, Check which asset reference you have configured.
In IMG SPRO - Maintenance and Service order - Order types and investment management - Define Assignment of AuC classes per Source Assignment
Select the Inv. Meas ast class " XXXX "
Choose the same Class " XXXX " while creating Asset master from order screen (Change 4001 to XXXX)
Hope this helps.
Thanks
S.N
Edited by: SN on Jun 26, 2009 1:43 PM
Similar Messages
-
Purchase order Release Stratergy-Error in Class CL01
Purchase Order Release Stratergy:
In CL01(create class) i have created the class FRG_EKKO and saved.Then in CL02(change class) under Basic data-Administrative data we found Assignment field tick is not selected and that is not in changeable mode.
Because of that reason Error occured like Error in Class in SPRO release stratergy. Release is taking place in Development Server but not in Production server.
Regards,
Wilson Babu GHi
This indicator shows that objects are assigned to this class.
The indicator is set automatically by the system.
once you assign the class to any objects then this flag will come automatically.
Please check if you have assigned the characteristics to the Class in CL02
Please check if you have assigned the release strategy to the Class in CL24N
Thanks & Regards
Kishore -
RUNTIME Error - User Status for Order release
HI Friends,
Pls go thru the run-time error description,which i'm getting on Order release.Pls reply,.
Runtime Errors MESSAGE_TYPE_X
Date and Time 31.03.2008 13:16:08
Short text
The current application triggered a termination with a short dump.
What happened?
The current application program detected a situation which really
should not occur. Therefore, a termination with a short dump was
triggered on purpose by the key word MESSAGE (type X).
What can you do?
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Error analysis
Short text of error message:
Unable to read RFC destination WORKFLOW_LOCAL_250
Long text of error message:
Technical information about the message:
Message class....... "SWF_RUN"
Number.............. 617
Variable 1.......... "WORKFLOW_LOCAL_250"
Variable 2.......... "RFC_READ_DESTINATION_TYPE"
Variable 3.......... "DESTINATION_NOT_EXIST"
Variable 4.......... " "
How to correct the error
Probably the only way to eliminate the error is to correct the program.
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"MESSAGE_TYPE_X" " "
"CL_SWF_RUN_WIM_LOCAL==========CP" or "CL_SWF_RUN_WIM_LOCAL==========CM088"
"IF_SWF_RUN_WIM_UTL_INTERNAL~GET_SYSTEM_USER"
If you cannot solve the problem yourself and want to send an error
notification to SAP, include the following information:
1. The description of the current problem (short dump)
To save the description, choose "System->List->Save->Local File
(Unconverted)".
2. Corresponding system log
Display the system log by calling transaction SM21.
Restrict the time interval to 10 minutes before and five minutes
after the short dump. Then choose "System->List->Save->Local File
(Unconverted)".
3. If the problem occurs in a problem of your own or a modified SAP
program: The source code of the program
In the editor, choose "Utilities->More
Utilities->Upload/Download->Download".
4. Details about the conditions under which the error occurred or which
actions and input led to the error.
System environment
SAP-Release 700
Application server... "SILDEV"
Network address...... "192.168.255.70"
Operating system..... "Windows NT"
Release.............. "5.2"
Hardware type........ "4x IA64 Level 3"
Character length.... 16 Bits
Pointer length....... 64 Bits
Work process number.. 2
Shortdump setting.... "full"
Database server... "SILDEV"
Database type..... "MSSQL"
Database name..... "DEV"
Database user ID.. "dev"
Char.set.... "C"
SAP kernel....... 700
created (date)... "Mar 3 2008 03:55:37"
create on........ "NT 5.0 2195 Service Pack 4 x86 MS VC++ 13.10"
Database version. "SQL_Server_8.00 "
Patch level. 150
Patch text.. " "
Database............. "MSSQL 7.00.699 or higher, MSSQL 8.00.194"
SAP database version. 700
Operating system..... "Windows NT 5.0, Windows NT 5.1, Windows NT 5.2, Windows
NT 6.0"
Memory consumption
Roll.... 16192
EM...... 8379680
Heap.... 0
Page.... 16384
MM Used. 4889280
MM Free. 3487552
User and Transaction
Client.............. 250
User................ "PM5CHARL"
Language Key........ "E"
Transaction......... " "
Transactions ID..... "49F6FEDCA000F177897B0017A4ABF059"
Program............. "CL_SWF_RUN_WIM_LOCAL==========CP"
Screen.............. "SAPMSSY1 3004"
Screen Line......... 2
Information on caller of Remote Function Call (RFC):
System.............. "DEV"
Database Release.... 700
Kernel Release...... 700
Connection Type..... 3 (2=R/2, 3=ABAP System, E=Ext., R=Reg. Ext.)
Call Type........... "synchron and transactional (emode 0, imode 0)"
Inbound TID.........." "
Inbound Queue Name..." "
Outbound TID........."C0A8FF46013847F096C00004"
Outbound Queue Name.." "
Client.............. 250
User................ "PM5CHARL"
Transaction......... " "
Call Program........."SAPLERFC"
Function Module..... "ARFC_DEST_SHIP"
Call Destination.... "NONE"
Source Server....... "SILDEV_DEV_00"
Source IP Address... "192.168.255.70"
Additional information on RFC logon:
Trusted Relationship " "
Logon Return Code... 0
Trusted Return Code. 0
Note: For releases < 4.0, information on the RFC caller are often
only partially available.
Information on where terminated
Termination occurred in the ABAP program "CL_SWF_RUN_WIM_LOCAL==========CP" -
in "IF_SWF_RUN_WIM_UTL_INTERNAL~GET_SYSTEM_USER".
The main program was "SAPMSSY1 ".
In the source code you have the termination point in line 10
of the (Include) program "CL_SWF_RUN_WIM_LOCAL==========CM088".
Source Code Extract
Line
SourceCde
1
METHOD if_swf_run_wim_utl_internal~get_system_user .
2
DATA: l_excp TYPE REF TO cx_swf_run_wim.
3
4
TRY.
5
IF me->m_int_state-system_user IS INITIAL.
6
me->m_int_state-system_user = cl_swf_run_workflow_properties=>get_rfc_destination_us
7
ENDIF.
8
re_user = me->m_int_state-system_user.
9
CATCH cx_swf_run_wim INTO l_excp.
>>>>>
MESSAGE ID l_excp->t100_msg-msgid
11
TYPE 'X'
12
NUMBER l_excp->t100_msg-msgno
13
WITH l_excp->t100_msg-msgv1 l_excp->t100_msg-msgv2
14
l_excp->t100_msg-msgv3 l_excp->t100_msg-msgv4.
15
ENDTRY.
16
17
ENDMETHOD. "
Contents of system fields
Name
Val.
SY-SUBRC
0
SY-INDEX
2
SY-TABIX
1
SY-DBCNT
0
SY-FDPOS
1
SY-LSIND
0
SY-PAGNO
0
SY-LINNO
1
SY-COLNO
1
SY-PFKEY
SY-UCOMM
SY-TITLE
CPIC and RFC Control
SY-MSGTY
X
SY-MSGID
SWF_RUN
SY-MSGNO
617
SY-MSGV1
WORKFLOW_LOCAL_250
SY-MSGV2
RFC_READ_DESTINATION_TYPE
SY-MSGV3
DESTINATION_NOT_EXIST
SY-MSGV4
SY-MODNO
0
SY-DATUM
20080331
SY-UZEIT
131608
SY-XPROG
SAPMSSY1
SY-XFORM
XAB_READ
Active Calls/Events
No. Ty. Program Include Line
Name
26 METHOD CL_SWF_RUN_WIM_LOCAL==========CP CL_SWF_RUN_WIM_LOCAL==========CM088 10
CL_SWF_RUN_WIM_LOCAL=>IF_SWF_RUN_WIM_UTL_INTERNAL~GET_SYSTEM_USER
25 METHOD CL_SWF_UTL_MAIL===============CP CL_SWF_UTL_MAIL===============CM00J 5
CL_SWF_UTL_MAIL=>GET_OWNER
24 METHOD CL_SWF_UTL_MAIL===============CP CL_SWF_UTL_MAIL===============CM002 37
CL_SWF_UTL_MAIL=>IF_SWF_UTL_MAIL~SEND
23 METHOD CL_SWF_RUN_WIM_LOCAL==========CP CL_SWF_RUN_WIM_LOCAL==========CM0IE 38
CL_SWF_RUN_WIM_LOCAL=>IF_SWF_RUN_WIM_INTERNAL~SEND_ERROR_REPAIR_MAIL
22 METHOD CL_SWF_RUN_WIM_STATE==========CP CL_SWF_RUN_WIM_STATE==========CM021 7
CL_SWF_RUN_WIM_STATE=>DYN_SEND_ERROR_REPAIR_MAIL
21 METHOD CL_SWF_RUN_WIM_STATE==========CP CL_SWF_RUN_WIM_STATE==========CM01V 12
CL_SWF_RUN_WIM_STATE=>EXECUTE_STATE_TRANSITION
20 METHOD CL_SWF_RUN_WIM_STATE_FLOW=====CP CL_SWF_RUN_WIM_STATE_FLOW=====CM004 2
CL_SWF_RUN_WIM_STATE_FLOW=>IF_SWF_RUN_WIM_STATE~EXECUTE_STATE_TRANSITION
19 METHOD CL_SWF_RUN_WIM_LOCAL==========CP CL_SWF_RUN_WIM_LOCAL==========CM09A 72
CL_SWF_RUN_WIM_LOCAL=>SET_STATUS_INTERNAL
18 METHOD CL_SWF_RUN_WIM_LOCAL==========CP CL_SWF_RUN_WIM_LOCAL==========CM0H3 16
CL_SWF_RUN_WIM_LOCAL=>_SET_STATUS
17 METHOD CL_SWF_RUN_WIM_LOCAL==========CP CL_SWF_RUN_WIM_LOCAL==========CM04P 7
CL_SWF_RUN_WIM_LOCAL=>IF_SWF_RUN_WIM_INTERNAL~SET_STATUS
16 METHOD CL_SWF_RUN_WIM_EXECUTION_MGR==CP CL_SWF_RUN_WIM_EXECUTION_MGR==CM011 12
CL_SWF_RUN_WIM_EXECUTION_MGR=>SET_WORKITEM_STATUS_ERROR
15 METHOD CL_SWF_RUN_WIM_EXECUTION_MGR==CP CL_SWF_RUN_WIM_EXECUTION_MGR==CM01A 81
CL_SWF_RUN_WIM_EXECUTION_MGR=>HANDLE_EXCEPTION_RESULT
14 METHOD CL_SWF_RUN_WIM_EXECUTION_MGR==CP CL_SWF_RUN_WIM_EXECUTION_MGR==CM00R 93
CL_SWF_RUN_WIM_EXECUTION_MGR=>HANDLE_EXECUTION_RESULT
13 METHOD CL_SWF_RUN_WIM_EXECUTION_MGR==CP CL_SWF_RUN_WIM_EXECUTION_MGR==CM008 144
CL_SWF_RUN_WIM_EXECUTION_MGR=>START_EXECUTION
12 METHOD CL_SWF_RUN_WORKFLOW_START=====CP CL_SWF_RUN_WORKFLOW_START=====CM016 42
CL_SWF_RUN_WORKFLOW_START=>START_WORKITEM
11 METHOD CL_SWF_RUN_WORKFLOW_START=====CP CL_SWF_RUN_WORKFLOW_START=====CM002 33
CL_SWF_RUN_WORKFLOW_START=>EXECUTE
10 FUNCTION SAPLSWW_SRV LSWW_SRVU13 135
SWW_WI_CREATE_VIA_EVENT_INTERN
9 FUNCTION SAPLSWW_SRV LSWW_SRVU11 64
SWW_WI_CREATE_VIA_EVENT
8 FORM SAPLSWW_SRV LSWW_SRVU11 1
SWW_WI_CREATE_VIA_EVENT
7 FORM SAPMSSY1 SAPMSSY1 271
XAB_RUN_DRIVER
6 FUNCTION SAPLSXAB LSXABU01 9
RFC_RUN_XAB_DRIVER
5 FUNCTION SAPLERFC LERFCU01 115
ARFC_EXECUTE
4 FUNCTION SAPLERFC LERFCU02 386
ARFC_DEST_SHIP
3 FORM SAPLERFC LERFCU02 1
ARFC_DEST_SHIP
2 FORM SAPMSSY1 SAPMSSY1 85
REMOTE_FUNCTION_CALL
1 MODULE (PBO) SAPMSSY1 SAPMSSY1 30
%_RFC_START
Chosen variables
Name
Val.
No. 26 Ty. METHOD
Name CL_SWF_RUN_WIM_LOCAL=>IF_SWF_RUN_WIM_UTL_INTERNAL~GET_SYSTEM_USER
RE_USER
222222222222
000000000000
000000000000
000000000000
L_EXCP
B0004000
90006000
SY-MSGID
SWF_RUN
55455542222222222222
376F25E0000000000000
00000000000000000000
00000000000000000000
L_EXCP->T100_MSG-MSGID
SWF_RUN
55455542222222222222
376F25E0000000000000
00000000000000000000
00000000000000000000
SWFCO_WIM_WI_FORWARD
SWW_WI_FORWARD
555554544554542222222222222222
377F79F6F271240000000000000000
000000000000000000000000000000
000000000000000000000000000000
SY-MSGNO
617
333
617
000
000
L_EXCP->T100_MSG+40(6)
617
333
617
000
000
SY-MSGV1
WORKFLOW_LOCAL_250
54544445544444533322222222222222222222222222222222
7F2B6CF7FCF31CF25000000000000000000000000000000000
00000000000000000000000000000000000000000000000000
00000000000000000000000000000000000000000000000000
L_EXCP->T100_MSG+48(100)
WORKFLOW_LOCAL_250
54544445544444533322222222222222222222222222222222
7F2B6CF7FCF31CF25000000000000000000000000000000000
00000000000000000000000000000000000000000000000000
00000000000000000000000000000000000000000000000000
SY-MSGV2
RFC_READ_DESTINATION_TYPE
54455444544554445444555542222222222222222222222222
263F2514F45349E149FEF49050000000000000000000000000
00000000000000000000000000000000000000000000000000
00000000000000000000000000000000000000000000000000
L_EXCP->T100_MSG+148(100)
RFC_READ_DESTINATION_TYPE
54455444544554445444555542222222222222222222222222
263F2514F45349E149FEF49050000000000000000000000000
00000000000000000000000000000000000000000000000000
00000000000000000000000000000000000000000000000000
SY-MSGV3
DESTINATION_NOT_EXIST
44554445444544554545522222222222222222222222222222
45349E149FEFEF4F5893400000000000000000000000000000
00000000000000000000000000000000000000000000000000
00000000000000000000000000000000000000000000000000
L_EXCP->T100_MSG+248(100)
DESTINATION_NOT_EXIST
44554445444544554545522222222222222222222222222222
45349E149FEFEF4F5893400000000000000000000000000000
00000000000000000000000000000000000000000000000000
00000000000000000000000000000000000000000000000000
SY-MSGV4
22222222222222222222222222222222222222222222222222
00000000000000000000000000000000000000000000000000
00000000000000000000000000000000000000000000000000
00000000000000000000000000000000000000000000000000
L_EXCP->T100_MSG+348(100)
22222222222222222222222222222222222222222222222222
00000000000000000000000000000000000000000000000000
00000000000000000000000000000000000000000000000000
00000000000000000000000000000000000000000000000000
%_DUMMY$$
2222
0000
0000
0000
No. 25 Ty. METHOD
Name CL_SWF_UTL_MAIL=>GET_OWNER
RE_OWNER
%_DUMMY$$
2222
0000
0000
0000
ME->M_OWNER
%_VIASELSCR
0
4
ME
A0005000
E0001000
L_WORKITEM
60009000
3000C000
SY-REPID
CL_SWF_UTL_MAIL===============CP
4455545554544443333333333333334522222222
3CF376F54CFD19CDDDDDDDDDDDDDDD3000000000
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
No. 24 Ty. METHOD
Name CL_SWF_UTL_MAIL=>IF_SWF_UTL_MAIL~SEND
EX_SENT_TO_ALL
2
0
0
0
EX_MAIL_OBJECT
2222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
SYST-REPID
CL_SWF_UTL_MAIL===============CP
4455545554544443333333333333334522222222
3CF376F54CFD19CDDDDDDDDDDDDDDD3000000000
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
ME
A0005000
E0001000
OBJECT_HD_CHANGE-ACNAM
SWW_WI_DISPLAY_FOR_MAIL
555554544554455445544442222222222222222222222222222222
377F79F4930C19F6F2FD19C0000000000000000000000000000000
000000000000000000000000000000000000000000000000000000
000000000000000000000000000000000000000000000000000000
OBJPARB
Table IT_758[1x570]
\CLASS=CL_SWF_UTL_MAIL\METHOD=IF_SWF_UTL_MAIL~SEND\DATA=OBJPARB
Table reference: 224
TABH+ 0(20) = E06D6DEFF9060000000000000000000000000000
TABH+ 20(20) = E0000000F6020000010000003A020000FFFFFFFF
TABH+ 40(16) = 042A0200600B000010000000C1248401
store = 0xE06D6DEFF9060000
ext1 = 0x0000000000000000
shmId = 0 (0x00000000)
id = 224 (0xE0000000)
label = 758 (0xF6020000)
fill = 1 (0x01000000)
leng = 570 (0x3A020000)
loop = -1 (0xFFFFFFFF)
xtyp = TYPE#000046
occu = 16 (0x10000000)
access = 1 (ItAccessStandard)
idxKind = 0 (ItIndexNone)
uniKind = 2 (ItUniqueNon)
keyKind = 1 (default)
cmpMode = 2 (cmpSingleMcmpR)
occu0 = 1
groupCntl = 0
rfc = 0
unShareable = 0
mightBeShared = 1
sharedWithShmTab = 0
isShmLockId = 0
gcKind = 0
isUsed = 1
isCtfyAble = 1
>>>>> Shareable Table Header Data <<<<<
tabi = 0x80095FEFF9060000
pgHook = 0x0000000000000000
idxPtr = 0x0000000000000000
shmTabhSet = 0x0000000000000000
id = 540 (0x1C020000)
refCount = 0 (0x00000000)
tstRefCount = 0 (0x00000000)
lineAdmin = 16 (0x10000000)
lineAlloc = 16 (0x10000000)
shmVersId = 0 (0x00000000)
shmRefCount = 1 (0x01000000)
>>>>> 1st level extension part <<<<<
regHook = Not allocated
collHook = Not allocated
ext2 = Not allocated
>>>>> 2nd level extension part <<<<<
tabhBack = Not allocated
delta_head = Not allocated
pb_func = Not allocated
pb_handle = Not allocated
OBJECT_HD_CHANGE-OBJDES
Workflow 405090 set to status ERROR
56766667233333327672762776777245545222222222222222
7F2B6CF70405090035404F03414530522F2000000000000000
00000000000000000000000000000000000000000000000000
00000000000000000000000000000000000000000000000000
%_FSREG_001
OBJCONT
Table IT_760[9x510]
\CLASS=CL_SWF_UTL_MAIL\METHOD=IF_SWF_UTL_MAIL~SEND\DATA=OBJCONT
Table reference: 225
TABH+ 0(20) = 106F6DEFF9060000000000000000000000000000
TABH+ 20(20) = E1000000F802000009000000FE010000FFFFFFFF
TABH+ 40(16) = 042A0200300B000010000000C1248401
store = 0x106F6DEFF9060000
ext1 = 0x0000000000000000
shmId = 0 (0x00000000)
id = 225 (0xE1000000)
label = 760 (0xF8020000)
fill = 9 (0x09000000)
leng = 510 (0xFE010000)
loop = -1 (0xFFFFFFFF)
xtyp = TYPE#000045
occu = 16 (0x10000000)
access = 1 (ItAccessStandard)
idxKind = 0 (ItIndexNone)
uniKind = 2 (ItUniqueNon)
keyKind = 1 (default)
cmpMode = 2 (cmpSingleMcmpR)
occu0 = 1
groupCntl = 0
rfc = 0
unShareable = 0
mightBeShared = 1
sharedWithShmTab = 0
isShmLockId = 0
gcKind = 0
isUsed = 1
isCtfyAble = 1
>>>>> Shareable Table Header Data <<<<<
tabi = 0x402D5FEFF9060000
pgHook = 0x0000000000000000
idxPtr = 0x0000000000000000
shmTabhSet = 0x0000000000000000
id = 541 (0x1D020000)
refCount = 0 (0x00000000)
tstRefCount = 0 (0x00000000)
lineAdmin = 16 (0x10000000)
lineAlloc = 16 (0x10000000)
shmVersId = 0 (0x00000000)
shmRefCount = 1 (0x01000000)
>>>>> 1st level extension part <<<<<
regHook = Not allocated
collHook = Not allocated
ext2 = Not allocated
>>>>> 2nd level extension part <<<<<
tabhBack = Not allocated
delta_head = Not allocated
pb_func = Not allocated
pb_handle = Not allocated
OWNER
222222222222
000000000000
000000000000
000000000000
SENDER
222222222222
000000000000
000000000000
000000000000
SY-SUBRC
0
0000
0000
SWFCO_MAIL_ERROR_NOTIFY
0002
3333
0002
0000
0000
OBJECT_HD_CHANGE
E ERRORMESSAGEWorkflow 405090 set to status ERROR 00000000000000 F F S
4222222222245545445544456766667233333327672762776777245545222222222222222233333333333333242425
50000000000522F2D5331757F2B6CF70405090035404F03414530522F2000000000000000000000000000000060603
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
OBJECT_TYPE
RAW
545
217
000
000
SWFCO_OBJTYPE_BOR
BO
44
2F
00
00
No. 23 Ty. METHOD
Name CL_SWF_RUN_WIM_LOCAL=>IF_SWF_RUN_WIM_INTERNAL~SEND_ERROR_REPAIR_MAIL
LT_AGENTS
Table IT_752[1x28]
\CLASS=CL_SWF_RUN_WIM_LOCAL\METHOD=IF_SWF_RUN_WIM_INTERNAL~SEND_ERROR_REPAIR_MAIL\DATA=LT_AGEN
Table reference: 207
TABH+ 0(20) = 806B6DEFF9060000000000000000000000000000
TABH+ 20(20) = CF000000F0020000010000001C000000FFFFFFFF
TABH+ 40(16) = 04180100E006000010000000C1248401
store = 0x806B6DEFF9060000
ext1 = 0x0000000000000000
shmId = 0 (0x00000000)
id = 207 (0xCF000000)
label = 752 (0xF0020000)
fill = 1 (0x01000000)
leng = 28 (0x1C000000)
loop = -1 (0xFFFFFFFF)
xtyp = TYPE#000022
occu = 16 (0x10000000)
access = 1 (ItAccessStandard)
idxKind = 0 (ItIndexNone)
uniKind = 2 (ItUniqueNon)
keyKind = 1 (default)
cmpMode = 2 (cmpSingleMcmpR)
occu0 = 1
groupCntl = 0
rfc = 0
unShareable = 0
mightBeShared = 1
sharedWithShmTab = 0
isShmLockId = 0
gcKind = 0
isUsed = 1
isCtfyAble = 1
>>>>> Shareable Table Header Data <<<<<
tabi = 0xA0696DEFF9060000
pgHook = 0x0000000000000000
idxPtr = 0x0000000000000000
shmTabhSet = 0x0000000000000000
id = 537 (0x19020000)
refCount = 1 (0x01000000)
tstRefCount = 0 (0x00000000)
lineAdmin = 16 (0x10000000)
lineAlloc = 16 (0x10000000)
shmVersId = 0 (0x00000000)
shmRefCount = 2 (0x02000000)
>>>>> 1st level extension part <<<<<
regHook = Not allocated
collHook = Not allocated
ext2 = Not allocated
>>>>> 2nd level extension part <<<<<
tabhBack = Not allocated
delta_head = Not allocated
pb_func = Not allocated
pb_handle = Not allocated
SYST-REPID
CL_SWF_RUN_WIM_LOCAL==========CP
4455545554554454444433333333334522222222
3CF376F25EF79DFCF31CDDDDDDDDDD3000000000
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
ME->IF_SWF_RUN_WIM_INTERNAL~M_SWW_WIHEAD+840(28)
WS20000014
55333333332222
73200000140000
00000000000000
00000000000000
SY-REPID
CL_SWF_RUN_WIM_LOCAL==========CP
4455545554554454444433333333334522222222
3CF376F25EF79DFCF31CDDDDDDDDDD3000000000
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
FUNCNAME
SWW_WI_DISPLAY_FOR_MAIL
555554544554455445544442222222
377F79F4930C19F6F2FD19C0000000
000000000000000000000000000000
000000000000000000000000000000
SWFCO_WI_REMOTE
R
5
2
0
0
PARAMETER-NAME
WI_ID
54544
79F94
00000
00000
SWFCO_CALLBACK_AGENTS
CALLBACKAGENTS
54444444454444552222222222222222
F31CC213BF175E430000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
PARAMETER-VALUE
000000405090
333333333333
000000405090
000000000000
000000000000
ME->IF_SWF_RUN_WIM_INTERNAL~M_SWW_WIHEAD-WI_ID
000000405090
333333333333
000000405090
000000000000
000000000000
PARAMETER
807020C0
7080A050
00000000
00100010
LS_MAILOBJ
2222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
ME
60009000
3000C000
SWFCO_WORKITEM_OBJECT
_WORKITEM
55454454422222222222222222222222
F7F2B945D00000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
No. 22 Ty. METHOD
Name CL_SWF_RUN_WIM_STATE=>DYN_SEND_ERROR_REPAIR_MAIL
SWFCO_WORKITEM_OBJECT
_WORKITEM
55454454422222222222222222222222
F7F2B945D00000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
%_DUMMY$$
2222
0000
0000
0000
No. 21 Ty. METHOD
Name CL_SWF_RUN_WIM_STATE=>EXECUTE_STATE_TRANSITION
IM_STATE_ACTIONS
Table IT_279[30x152]
\CLASS=CL_SWF_RUN_WIM_STATE_FLOW\DATA=M_STATE_ACTIONS
Table reference: 112
TABH+ 0(20) = 90CE53EFF9060000B04D6BEFF906000000000000
TABH+ 20(20) = 70000000170100001E0000009800000090010000
TABH+ 40(16) = 049A01007004000010000000C9248001
store = 0x90CE53EFF9060000
ext1 = 0xB04D6BEFF9060000
shmId = 0 (0x00000000)
id = 112 (0x70000000)
label = 279 (0x17010000)
fill = 30 (0x1E000000)
leng = 152 (0x98000000)
loop = 400 (0x90010000)
xtyp = TYPE#000009
occu = 16 (0x10000000)
access = 1 (ItAccessStandard)
idxKind = 1 (ItIndexLinear)
uniKind = 2 (ItUniqueNon)
keyKind = 1 (default)
cmpMode = 2 (cmpSingleMcmpR)
occu0 = 1
groupCntl = 0
rfc = 0
unShareable = 0
mightBeShared = 0
sharedWithShmTab = 0
isShmLockId = 0
gcKind = 0
isUsed = 1
isCtfyAble = 1
>>>>> Shareable Table Header Data <<<<<
tabi = 0xF0C453EFF9060000
pgHook = 0xF0CE53EFF9060000
idxPtr = 0x50E253EFF9060000
shmTabhSet = 0x0000000000000000
id = 207 (0xCF000000)
refCount = 0 (0x00000000)
tstRefCount = 0 (0x00000000)
lineAdmin = 48 (0x30000000)
lineAlloc = 48 (0x30000000)
shmVersId = 0 (0x00000000)
shmRefCount = 1 (0x01000000)
>>>>> 1st level extension part <<<<<
regHook = 0x204C6BEFF9060000
collHook = 0x0000000000000000
ext2 = 0x0000000000000000
>>>>> 2nd level extension part <<<<<
tabhBack = Not allocated
delta_head = Not allocated
pb_func = Not allocated
pb_handle = Not allocated
SWFCO_WI_NO_DEADLINE
0000
3333
0000
0000
0000
L_OBJ
A0005000
D0002000
ME
A0005000
D0002000
ME->IF_SWF_RUN_WIM_STATE~NEW_STATUS
ERROR
455452222222
522F20000000
000000000000
000000000000
<%_L003>
ERROR
455452222222
522F20000000
000000000000
000000000000
SY-REPID
CL_SWF_RUN_WIM_STATE==========CP
4455545554554455545433333333334522222222
3CF376F25EF79DF34145DDDDDDDDDD3000000000
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
<%_L004>
F
4
6
0
0
<STATE_ACTION>
FERROR 01DYN_SEND_ERROR_REPAIR_MAIL
4455452222222334545544454554555454455444422222222222222222222222222222222222
6522F200000000149EF35E4F522F2F250192FD19C00000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000
<%_L002>
<%_L002>-WI_STAT
SYST-REPID
CL_SWF_RUN_WIM_STATE==========CP
4455545554554455545433333333334522222222
3CF376F25EF79DF34145DDDDDDDDDD3000000000
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
SWFCO_WI_STATUS_WILD_CARD
222222222222
A00000000000
000000000000
000000000000
<%_L002>-WI_TYPE
<STATE_ACTION>-METHOD
DYN_SEND_ERROR_REPAIR_MAIL
4545544454554555454455444422222222222222222222222222222222222
49EF35E4F522F2F250192FD19C00000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000
%_SPACE
2
0
0
0
LV_EXCP
F0000000
F0000000
No. 20 Ty. METHOD
Name CL_SWF_RUN_WIM_STATE_FLOW=>Hello,
Get help from your abaper on this.
Vinay -
Batch Derivation - No sender found during manual derivation & order release
Folks,
I'm trying to simulate the batch derivation functionality but couldn't get it work. I have used both manual and release production order derivation events.
Necessary configuration is setup including batch where used list and related derivation configuration.
I have setup the condition records as follows (it is based on pull derivation; 1 receiver and n sender)
For sender condition, I have condition record based on receiving + sending material combination, in which I defined two sending materials (both HALB) along with the receiving material (FERT). VFDAT (SLED) is my field attribute.
For recipient condition, I have condition record based on material number, which is the same FERT material. VFDAT (SLED) is my field attribute and standard rules have been maintained.
Both HALB materials have batches with VFDAT (SLED) dates.
For manual derivation, I created a batch for the FERT without any VFDAT data in it and I'm trying to run DVMAN transaction for this FERT batch to invoke derivation, but it errors with two messages "No sender found for attribute VFDAT" & "The system did not find any sending batches".
I tried using a production order release as well, but it's the same problem.
Any thoughts as to why it is not working??
Thanks!!Figured it out. I forgot to assign batches before invoking batch derivation.
-
Batch Derivation - No sender found during both Manual deriv & Order release
Folks,
I'm trying to simulate the batch derivation functionality but couldn't get it work. I have used both manual and release production order derivation events.
Necessary configuration is setup including batch where used list and related derivation configuration.
I have setup the condition records as follows (it is based on pull derivation; 1 receiver and n sender)
For sender condition, I have condition record based on receiving + sending material combination, in which I defined two sending materials (both HALB) along with the receiving material (FERT). VFDAT (SLED) is my field attribute.
For recipient condition, I have condition record based on material number, which is the same FERT material. VFDAT (SLED) is my field attribute and standard rules have been maintained.
Both HALB materials have batches with VFDAT (SLED) dates.
For manual derivation, I created a batch for the FERT without any VFDAT data in it and I'm trying to run DVMAN transaction for this FERT batch to invoke derivation, but it errors with two messages "No sender found for attribute VFDAT" & "The system did not find any sending batches".
I tried using a production order release as well, but it's the same problem.
Any thoughts as to why it is not working??
Thanks!!Figured it out. I forgot to assign batches before invoking batch derivation.
-
Predefined object type for Purchase order release stratergy
dear experts,
There are already predefined object type for purchase order like bus2012 where i can create new events and methods. I want to know is there any predefined objects for purchase order release strategy. The requirement is there i want to define method, that should display the po release screen. If i bind this method with work flow template, mail should be triggered and if i click the mail po release screen should be opened for respective material...
regards,
Kandhan GHello
I'm using the BUS2012 Object type in workflow task but in simulation the task run correct but in the transaction when modify a purchase orden the task send an error...
maybe the error is similar...did you solve this problem?..
Thanks!
Wladimir E.
[email protected] -
Dear ,
At the time of FERT process order material avaibility check i got error
"021 No control data maintained for checking group 01 and checking rule Z2"
So how can i resolved the same.?Dear Maulik,
Check in OPJJ and in OPJK.
First Availability check control should be created in OVZ2.
Then checking rule in OPJL.
For this checking group and checking rule combination scope of check must be configured in OPJJ.
OPJK is to control the production order creation with respect to material's availability.
It should be done for business function 1 - Check availability during order creation,
2 - Check availability during order release.
Regards
Mangalraj.S
Edited by: Mangalraj.S on Mar 9, 2009 3:22 PM -
Dear all,
when i'm trying to release activity in the project, the following error triggers:
Order type PS05 plant ALSH: No checking rule maintained for operation
Message no. CO288
Diagnosis
To carry out a material availability check, the system needs a check rule. No check rule has been maintained for order type PS05 and plant ALSH for this business transaction (for ex. "order creation" or "order release").
Procedure
Maintain the checking group for the corresponding plant, order type and key (business transaction).
Key 1: control for automatic checking on
order creation or manual checking for orders that have not been released.
Key 2: control for automatic check on order release or manual check for
partially released or released orders.
so, how can i Maintain the checking group for the corresponding plant, order type and key (business transaction). ?????????????/Entries for checking control are missing. T Code OPJK, maintain the details for plant and order type.
Regards
Sreenivas -
Proces order release not possible/Release rejected
Hi PP Guru,
While process order release the system shows error that the order release not possible / release rjected.
pl tell me what r the possibilities to be check to resolve above problem.
Bye
subhashThe Possible reasons could be one of the following -
Missing Parts - Some of the components required for the order may not be available
Missing Capacity - Capacity required for the order is not available
Error in Cost calculation
Error in Batch allocation to the component materials
When a process order is release some of the functions are carried out in background like Creating a reservation, material availability check, capacity check, precosting......
If something goes wrong in one of the step the order may not release.
Please check the logs during release it will have the clear message.
Hope this helps you. -
Hello,
I've created a process order of Total Qty 50 EA and I've maintained two of its components of quantity 50 PC each. But while releasing the order, its giving the following error in the log:
"Item 000000 requires exactly 50 serial numbers for the asset".
Gurus, Please guide me in debugging this error.
Thanks and regards,
Kaushik.Kaushik,
does you ahev attached serial number profile to your haeder material , in which settings is like that , your need to assign serial number at the time of order release thats why you are getting this error.
and if order quantity is not 50 but the component quantity is 50 for one of the item , means you have serialized compoent at lower level and you are using direct production so at the time of header order release , lower level is also getting release and at lower level you need to assign serial number at the time of release.
check in your material master whats the settings for special procurement MRP 2 view and also check for serial number profile at lower level item which is having quantity 50 in BOM of header.
Check and revert back.
Hope it helps you.
Regards
Ritesh -
Hi,
Is there a report that I can run that will give me the following information with regards to Purchase Orders released: PO number, Date Entered, Username, Release Code, Release Date and Released By?
Thank-you in advance.
Regards,
TracyHi,
I think there is no such report as you have to develop the report through abap . With the useage of the tables i.e. EKKO,EKPO and few more you can have all this information.. -
Purchase order release strategy report
Dear Gurus,
We are using purchase order release strategy with classification.
We have 3-4 level of release. We want to develop a report where we will come to know at which level purchase order is pending for release .
How to get it ?
Please provide ur help for the same
Rgds,
SaurabhHi,
Basically in EKKO table there is a field name FRGZU -
Release status based on that we can write a logic take the report.
for example A1,B2,C3 ARE THREE release codes in that if A1 released means with check thable whether A1 released once it is release it will go to next release code it iwll check the status again inthe loop....
Just tell him the logic to ABAP person they will develop
Rehgards
Murugan J -
Purchase Order released date field and table name
Hi,
Please tell me the Purchase Order released date field and table name.
Regards
DeepakHi,
Table : EKKO.
Fields : FRGKE,FRGZU.
You can get release date of PO from CDHDR table.
give object value as your po number and check.dont forget to give leading zeros.
The udate will be date field and transaction will be me29n for relaesed po. -
Creating a planned order with error "Material requires configuration"
Dear All,
I am facing a problem for creation of a planned order with error "Material requires configuration".
To follow the note 180317, I change Account Assignment Category to "U" (Unknown).
However, the system still does display the same error.
Could you please help provide possible solution for this?
Regards,
PhongSee also the following blog post:
Configurable planned order for material variants: Exception "53: No BOM explosion due to missing configuration"
BR
Caetano -
PO order number error in Sales order
Hai Everybody,
I have a problem of PO order number error in the sales order.
While creating Sales order, i am entering the PO order number in SO.
Though the document is complete, i am getting this error message : "ordering errors; tested ORGID: 7147144007" and unable to proceed further (saving order & delivery).
Please give me some inputs to solve the issue.
Thanks in advance
JayaThanks for your inputs.
@Ram : i have created the same senaerio in Quality system though manual entries still i am facing the same problem i dont know how they have created in Production system, how to find out please tell me.
@Raghu.k : i have checked in VOV8 ( check po number is set blank which means no check ), still i am facing the problem.
Please suggest further to solve the issue.
Thanks
Jaya
Maybe you are looking for
-
Adobe Galleries in iWeb 2? html snippets?
What I am seeking is a better grasp of how the html widgets work - but most specifically, I want to put some Adobe galleries on my iWeb site. iPhoto doesn't seem to do the trick I want - which is a horizontal row of thumbnails in one pane/frame & the
-
Navigation error within the WD LeaveRequest
Hi everybody, We are using an ECC6.0 / EP 7.0. When I create a LeaveRequest using the LeaveRequest webdynpro, I execute a 3 steps guided procedure: 1. Display and Edit 2. Review and Send 3. Completed At the 3rd step, the following links appear: <b>Wh
-
LSMW for transaction FS00 is very slow
Hello all, I wrote a batch input program to process GL entries for Chart of Accounts using LSMW, transaction FS00. We are using ECC 6.0. I could not use the direct input program becuase my client has FS01 and FS02 turned off. It is very slow. I h
-
Planning: forms security suddenly disappear
For no known or suspected reason an application lost its forms security. Anyone have a probable cause for this?
-
Dynamically Pass a list as input parameter to a Graphical Clac View
Hi All, Can anyone please let me know if it is possible to pass a list of comma separated values as an input parameter to a graphical calculation view and how this list can be parsed inside the view? The requirement is to invoke the graphical view us