PM7 on Windows 2003 Ent SP2

Hi,
Does PM7 work on WIndows 2003 Enterprise SP2?
I have PM7 installed and it starts but when opening a template an error pop's up:
Cannot open file
Error code 8009:-001
I have read some articles on this forum and other websites that PM7 is to old to run on Windows Vista and Windows 7. So I was wondering about Windows 2003.....

It's not clear to me if your "No!" refers to the explicit question of the title, or to the implicit one ending the message...

Similar Messages

Error launching Infoview on Windows 2003 R2 SP2 64 bits

In our Lab, just installed BO XI 3.1 on a Windows 2003 R2 SP2 32 bits AND a Windows 2003 R2 SP2 64 bits servers.
When launching Infoview on the 64 bits server, I get the following error message:
Server Error in '/InfoViewApp' Application
Runtime Error
Description: An application error occurred on the server. The current custom error settings for this applicationprevent the details of the application error from being viewed.
Details: To enable the details of this specific error message to be viewable on the local server machine, please create <customErrors> tag within a "web.config" configuration file located in the root directory of the current web application....
I did modify the web.config file for the tag: <customErrors mode="RemoteOnly"/>
When accessing Infoview after the change, I get:
Server Error in '/InfoViewApp' Application
Retrieving the COM class factory for component with CLSI {E063B04A-CB8B-460E-99D0-F7D8FA2FAAA2} failed due to the following error: 80040154
Description: An unhandled exception occurred during the execution of the current web request. Pleas review the stack trace....
I don't have any problems accessing Infoview on my 32 bits server. Same installation procedure.
I uninstalled BO on my 64 bits server and reinstalled without solving my problem.
Any ideas or experience with 64 bits envir.?
Thanks for any advice, suggestions. Wondering if I should just be going with 32 bits but we're trying to go with as many 64 bits servers in the field.
Regards

Denis,
You pointed me in the right direction. Found something in the DB knowledge of SAP (with some patience..).
I'm not too sure if it's the article ID but here's what show up next to the title: 1326978
Mainly, here's the solution:
Symptom
How to configure XI 3.1 with Win2003 64-bit using IIS
When navigating to InfoView, user receives "Server Error" message.
Server Error in '/businessobjects/Enterprise115/InfoView' Application. -- displayed for XIR2
Server Error in '/InfoViewApp/ Application. -- displayed for XI 3.x
Reproducing the Issue
Issue could occur in any 32-bit version of XI (XIR2 and XI 3.x) that supports 64 bit windows 2003 operating systems
Cause
While newer versions of XIR2 and XI 3.x are supported on 64 bit OS's they do not currently support 64 bit .net
Resolution
XI 3.1 is a 32-bit application and InfoView/CMC cannot run while IIS is in 64-bit mode. In addition, IIS cannot run in both 32-bit and 64-bit modes simultaneously. Follow these steps to change IIS to run in 32-bit mode and unregister/register the correct IIS app pools.
Open the windows command prompt and do the following:
To disable 64-bit .NET 2.0:
cd C:\windows\microsoft.net\Framework64\v2.0.50727
aspnet_regiis /u
To enable IIS to run in 32-bit mode:
cd C:\Inetpub\AdminScripts
cscript adsutil.vbs SET W3SVC/AppPools/Enable32bitAppOnWin64 1
To enable 32-bit .NET 2.0:
cd \WINDOWS\microsoft.net\Framework\v2.0.50727
aspnet_regiis /i
In IIS manager under Web Service Extensions:
ASP.NET v2.0.50727 (32-bit) (The new one that appeared when you enabled 32-bit .NET 2.0) Set to Allow.
ASP.NET v2.0.50727 (the 64-bit version that has been there since you installed .NET 2.0 framework) If it is still listed, Set to Prohibit.
Restart IIS (via Windows command prompt)
iisreset
I am now able to get to the login screen of InfoView but I'm missing the type of authentication field (Enterprise, Windows AD)
I'll take a look early tomorrow.
Thanks again.
Jay

Oracle 9i - Unable to set /PAE and /3GB Switch in Windows 2003 Server SP2

Hi
I was wondering if anyone had any experience on Windows 2003 Server (SP2) with setting /PAE and /3GB switches.
I am unable to set both together, setting one or the other works fine in the boot.ini.
Oracle seem to think you can set both but it causes my OS to crash/become unstable.
Has anyone set both switches together on 32 bit Windows 2003 Server successfully?
I am using Oracle 9.2.0.3 Enterprise Edition.
Thanks

The server is new. But we installed 10g before 11g was available. Then upgraded to 11g, so it is a little mess. What the oracle installer should have done in a fresh install, it is maybe not what the server has now.
I have checked for memory issues, processor issues, http errors, every EM setting and metric, and everything looks just right, but the applications are slow and the users are upset.
Anyway, thanks for the advice. Maybe we will need to re-install everything or go back to 10g on Windows 2003 Server x32. That configuration was working fine before rushing into 11g.

FMIS on Windows 2003 Enterprise SP2 (will it install?)

Hi all,
Might be a dumb question but a client has Windows 2003 Enterprise SP2 R2 and I was wondering if Flash Media Interactive Server will install and run fine on it?
The requirements on the site say Microsoft® Windows Server® 2003 with Service Pack 2 but no about "Standard" or "Enterprise".
Thanks for your help!
Ryan

JayCharles you mentioned installed FMIS on Windows 2003.
I installed FMIS 3.0 on Windows 2003.
CPU is Sempron 3500, 2gig Mem, 1gig ethernet card.
The streaming videos on VOD play fine internally within local lan.
Duration is over 1hour encoded in .flv format
I published swf's to wwwroot on Windows Server on C:\
the VOD's are in on E:\ in .flv format
DSL speed is up at about
Download Speed: 1741 kbps (217.6 KB/sec transfer rate)
Upload Speed: 434 kbps (54.3 KB/sec transfer rate)
Latency: 57 ms
The question is why the sound/video to outside world is not smooth.
Sample is here http://auffant.selfip.org/flvs/poly1.swf
Any suggestions to improve the quality, Where I am missing the boat?
Thanks

Iphone 5 S can't get sync with itunes installed on windows 2003 server SP2

After successfully installed itunes 11.1.5 for windows (i'm using windows 2003 server SP2 32bit). Whenever time I connect my iphone 5S to this computer, it always pops up an error message "This iPhone cannot be used because the required software is not installed. Run the iTunes installer to remove iTunes, then install iTunes again"
After I uninstalled/reinstalled many times I got successful install iTunes software, but this still having problem with this error message. When I open iTunes application and plug my iPhone 5S it always show the above error message & on iTunes application --> Files --> Devices I couldn't see any devices available (i.e Syns option is faded out & not clickable)

Hi Tolga,
You face with this error, because of Trex installation package is trying to install native i386 redistributables (vcredist_x86.msi) during the process. In order to patch Trex system on x64 architecture, follow the instructions, below;
1) Start sapinst, under your <TREX_PATCH> path
2) Ignore AMD64 warning popup
3) When popup appears on the "1603:Fatal error during installation." error, change temp folders on both environment variables, on my computer
4) Download and execute "vcredist_x64.exe" then run installer
5) After respective installation click on "Retry" button on error popup
At the end of this operation, your Trex patch will be succeeded. Please do not forget to undo your temp directory settings, on your Trex host. I hope that it is clarify your question.
Best regards,
Orkun Gedik
Senior SAP Development And Basis Consultant

NetWeaver and WTS on Windows 2003 Ent. 64bit Machine

Hi,
Does NetWeaver 7.0 able to install on an Intel Server (Windows 2003 Ent. 64bit) with WTS (Windows Terminal Server)? I try to check SAP note, SDN and Google but don't found any information about it. Thank you.
Cheer,
Sittidej K.

I´m still not sure what you ask...
A SAP system is usually installed alone on the server, no MS Office, no SAPGUI - just the plain system. You can administer the system using WTS (which is a supported way) but you should not run other applications on the same server.
There were problems in the past with some applications that could not be configured using WTS (e. g. DCOM connectors and other CRM related things) but you always have the possibility of using the console or other 3rd party tools to access the system and configure it remotely (e. g. VNC for free).
Markus

Bootcamp with Windows 2003 Server SP2

First of all I've got a bootcamp installation of Windows 2003 Server SP2 on my Mac Mini 2Ghz Core Duo, but until now I can't get the following:
- installation of Bootcamp software in Windows
- drivers for video and bluetooth
If some one can give me help on getting the correct software/drivers for this.
Already thanks.
Robbert

go to services window and set all your Oracle services to automatic instead of manual. this will start your database automatically rather you start it manually
Anil Malkai

Physical to Virtual Migration Approach for Exchange CCR 2007 on Windows 2003 Ent Edition

Hi Team,
I am running Two exchange 2007 CCR in my environment on Physical node on windows 2003 ENT edition. MY Hardware is end of life and we are planning to migrate/Converting them into virtual environmnet running Vsphere 5.1.
can any one let me know the best approach to virtualize exchange CCR .
Exchange CCR details are :-
Windows 2003 Ent edition.
Excahnge 2007.
Quorum is configuraed on shared folder.
Exchange Primary replicating Data on Exchange Secondry ..Both Primary and Secondry are having Raid 10 Local Disks.

Hi Ravi,
you can take a couple of approaches here. First off, I want to make sure you are not wanting to do a P2V conversion, that is taking the OS image that is running on the physical host and, using VMware Converter, create a virtual machine from it. You could do it that way but, depending on how much mail data is there it could take a long time and it's not the preferred approach for Exchange.
I'm going to make a couple of assumptions here:
I'm assuming upgrading to Exchange 2010 is out of the question (if it is not just do that and move mailboxes )
I'm assuming that there is plenty of storage in the vSphere environment to satisfy the requirements of Exchange. Obviously you would have to provide enough storage for all mail data x 2 if you want to continue with CCR.
Your message says "local disks", so I'm guessing the RAID 10 you mention is not available for use for these virtual machines and that you will provide some type of shared storage.
So, if you have enough compute within a vSphere cluster and enough storage (capacity and IO) to satisfy CCR I see two options:
Leapfrog approach
1. Shutdown passive
2. Evict passive from CCR cluster
3. Create new VM, Clustering services, Exchange/add as passive to the cluster (you could run setup in recovery mode /m:recoverserver, but I don't see why you would want to in a cluster)
4. Seed databases
5. Failover
6. Repeat for other physical
New Cluster
1. Create two new VMs
2. Create new CCR Cluster
3. Install Exchange active/passive
4. Move mailboxes
5. Decomm physicals
Obviously these are very high level but the approaches are straight forward. If this is your only set of Exchange servers in the environment you will have to account for any public folders/system folders, etc. Take some time and check out compute usage in the current environment so you are sure you have plenty of compute in the vSphere environment, especially if you are moving into a shared environment.
-alex

BOE XI R2 SP3 - Does it work on Windows 2003 Server SP2?

We are using BOE XI R2 SP3 (v. 11.5.9.1076) on Windows 2003 Server (32bit) Service Pack 1. Our company needs to upgrade all Windows 2003 Servers to Service Pack 2.
According to the documentation on the web, BOE XI R2 SP3 is supported on Win 2003 Svr SP1
(http://resources.businessobjects.com/support/communitycs/TechnicalPapers/boe_xi_r2_supported_platforms_windows_sp3.pdf)
However, I can't find any information on the BOE XI R2 SP3 version running on Win 2003 Svr SP2.
Could someone please let me know if there is such information (link to web site, etc), or if from own experience, this version of BOE XI works with W2003 SP2?
If this doesn't work, what should we do next? Should we upgrade BOE XI R2 to Service Pack 4, and then upgrade Win 2003 Server to SP2, or upgrade Win 2003 Server to SP2 and then upgrade BOE XI R2 to SP4?
Any feedback would be greatly appreciated.
Thank you so much.

Hi,
BOE XIR2 SP3 is supported on :
Supported Operating Systems
Desktop Products
u2022 Windows 2000 SP4 Professional
u2022 Windows XP SP2 Professional
u2022 Windows Vista (All 32-bit and 64-bit Editions)
u2022 Windows 2000 SP4 Advanced Server
u2022 Windows 2000 SP4 Datacenter Server
u2022 Windows 2000 SP4 Server
u2022 Windows Server 2003 R2 Enterprise Edition
u2022 Windows Server 2003 SP1 Datacenter Edition
u2022 Windows Server 2003 SP1 Enterprise Edition
u2022 Windows Server 2003 SP1 Standard Edition
u2022 Windows Server 2003 SP1 Web Edition
u2022 Windows Server 2003 (x64 Edition) SP2
Server Products
u2022 Windows 2000 SP4 Advanced Server
u2022 Windows 2000 SP4 Datacenter Server
u2022 Windows 2000 SP4 Server
u2022 Windows Server 2003 R2 Enterprise Edition
u2022 Windows Server 2003 SP1 Datacenter Edition
u2022 Windows Server 2003 SP1 Enterprise Edition
u2022 Windows Server 2003 SP1 Standard Edition
u2022 Windows Server 2003 SP1 Web Edition
u2022 Windows Server 2003 (x64 Edition) SP2
Hope this helps
Regards,
Shweta

Upgrading Windows 2003 Ent and Exchange 2000 to SBS?

Hi. I'm wondering the best course of action from a planning standing.
I have a single domain Windows 2003 R2 Enterprise Server. This has VMware 2.0 Server, SQL Server and TFS. The VMware is hosting Exchange 2003 and a second Domain Controller. (yes, not an optimal solution. Fortunately my Dell PowerEdge
with 8 Xeon cores and 16 G's memory has been holding up well).
I'm thinking that the least risky upgrade is to go to SBS 2008 server with Hypervisor. I've read that this is a supported upgrade path. Then drop VMware server.
What would people more experienced than me recommend?

Hi,
Any update?
Just checking in to see if the suggestions were helpful. Please let us know if you would like further assistance.
Best Regards,
Andy Qi
TechNet Subscriber Support
If you are
TechNet Subscription user and have any feedback on our support quality, please send your feedback
here.
Andy Qi
TechNet Community Support

Does the ACS 4.0 support for Simply Chinese Version of Windows 2003 Ent.

dose anyone sucessfully install the ACS 4.0 on the chinese version of Win2003 Ent? does it need any additional packages or patches related to windows OS?

thanks. but so many of guyes told me that you certainly encoutner problem when operated on chinese version 2003 OS. I will try it first, if failed, i have to change the os.

Table files and Index files 2GB on Windows 2003 Server SP2 32-bit

I'm new to Oracle and I've ran into the problem where my Table files and Index files are > 2GB. I have an Oracle instance running version 10.2.0.3.0. I have a number of tables file and index files that have a current files size of 1.99GB. My Oracle crashes about three times a week because of a "Write Fault/Failure. I've detemined that the RDBM is trying to write a index or table files > 2GB. When this occurs it crashes.
I've been reading the Oracle knowledge base that it suggest that there is a fix or release of Oracle 10g to resolve this problem. However, I've been unable to locate any fix or release to address my issue. Does such a fix or release exist? How do I address this issue? I'm from the world of MS SQL and IBM DB2 and we don't have this issue. I am running and NTFS files system. Could this be issue be related to an Windows Fix?
Surely Oracle can handel databases > 2GB.
Thanks in advance for any help.

After reading your response it appears that my real problem has to do with checking pointing. I've included below a copy of the error message:
Oracle process number: 8
Windows thread id: 3768, image: ORACLE.EXE (CKPT)
*** 2008-07-27 16:50:13.569
*** SERVICE NAME:(SYS$BACKGROUND) 2008-07-27 16:50:13.569
*** SESSION ID:(219.1) 2008-07-27 16:50:13.569
ORA-00206: Message 206 not found; No message file for product=RDBMS, facility=ORA; arguments: [3] [1]
ORA-00202: Message 202 not found; No message file for product=RDBMS, facility=ORA; arguments: [D:\ELLIPSE_DATABASE\CONTROL\CTRL1_ELLPROD1.CTL]
ORA-27072: Message 27072 not found; No message file for product=RDBMS, facility=ORA
OSD-04008: WriteFile() failure, unable to write to file
O/S-Error: (OS 33) The process cannot access the file because another process has locked a portion of the file.
error 221 detected in background process
ORA-00221: Message 221 not found; No message file for product=RDBMS, facility=ORA
ORA-00206: Message 206 not found; No message file for product=RDBMS, facility=ORA; arguments: [3] [1]
ORA-00202: Message 202 not found; No message file for product=RDBMS, facility=ORA; arguments: [D:\ELLIPSE_DATABASE\CONTROL\CTRL1_ELLPROD1.CTL]
ORA-27072: Message 27072 not found; No message file for product=RDBMS, facility=ORA
OSD-04008: WriteFile() failure, unable to write to file
O/S-Error: (OS 33) The process cannot access the file because another process has locked a portion of the file.
Can you tell me why I'm having issues with checking point and the control file?
Can I rebuild the control file if it s corrupt?
The problem has been going on since April 2008. I'm takening over the system.
Thanks

Event ID 1000 in Windows 2003 Server SP2 Backup Failure while trying to schedule backup job

Hi,
After run below mentioned two commands, I am able to schedule on backup Job but when I am trying to add another backup job then the same error is coming. Plz. reply with the solutions.
Cacls.exe C:\Windows\Tasks /E /G "NT AUTHORITY\SYSTEM":F
Cacls.exe C:\Windows\Tasks /E /G BUILTIN\Administrators:F

Hi,
If the issue could be resolved by these 2 commands, it seems to be a permission issue which is different as the common cause of Event 1000.
As the commands need to be performed each time creating a schedule, please check each file (task) under the folder c:\windows\Tasks and see if permissions are "inherited".
Also check the folder c:\windows\Tasks and see if "NT AUTHORITY\SYSTEM" and "BUILTIN\Administrators" are set as "This folder, subfolders and
files". It is recommended to compare the permission settings of this folder with a working system.
If you have any feedback on our support, please send to [email protected]

ECC 6.0 installation o WIndows 2003 Ent R2 on SQL 2005

Hello Folks,
As mentioned in subject line, I am in middle of the installation. I have got error in phase "Run ABAP Reports".
The error is mentioned in the file dev_slic file which I have pasted below. It is not able to drop an index to create a temporary lisense.
"Cannot drop the index 'MLICHECK.MLICHECK0', because it does not exist or you do not have permission."
Till the time I have already opened ticket with SAP.
Here is the dev_slic file -
>
trc file: "dev_slic", trc level: 2, release: "700"
SlicIGetDate: <20080413>
SlicPwForR3Setup: calc password out of <RPD20080413FJAWFNLTL>
SlicIGetDate: <20080413>
SlicSapInstall: sysname: >RPD< connect: >1< rollback: >1<
SlicIDbLock: first call to SlicIDbLock: initialize Mutex
db_con_init called
create_con (con_name=R/3)
Loading DB library 'dbmssslib.dll' ...
load shared library (dbmssslib.dll), hdl 0
    using "D:\usr\sap\RPD\SYS\exe\uc\NTI386\dbmssslib.dll"
Library 'dbmssslib.dll' loaded
function DbSlExpFuns loaded from library dbmssslib.dll
Version of 'dbmssslib.dll' is "700.08", patchlevel (0.72)
function dsql_db_init loaded from library dbmssslib.dll
function dbdd_exp_funs loaded from library dbmssslib.dll
New connection 0 created
0: name = R/3, con_id = -000000001 state = DISCONNECTED, perm = YES, reco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO
db_con_connect (con_name=R/3)
find_con_by_name found the following connection for reuse:
0: name = R/3, con_id = 000000000 state = DISCONNECTED, perm = YES, reco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO
Thread ID:1884
Thank You for using the SLOLEDB-interface
Using dynamic link library 'D:\usr\sap\RPD\SYS\exe\uc\NTI386\dbmssslib.dll'
dbmssslib.dll patch info
patchlevel   0
patchno      72
patchcomment MSSQL: Thread check in DbSlDisconnect (969143)
np:(local) connection used on RPDSERV
CopyLocalParameters: dbuser is 'rpd'
Using Provider SQLNCLI
OpenOledbConnection: MARS property was set successfully.
Provider Release:9.00.3042.00
Using Provider SQLNCLI
OpenOledbConnection: MARS property was set successfully.
Cache sizes: header 68 bytes, 100 names (157600 bytes), 100 dynamic statements (568800 bytes), total 726468 bytes
Initializing private procedure name cache.
procedure cache created/attached
Connected to db server : [RPDSERV] server_used : [np:(local)], dbname: RPD, dbuser: rpd
pn_id:RPDSERV_RPDRPD_RPD
Using MARS (on sql 9.0)
Connection 0 opened (DBSL handle 0)
ExecuteAndFlush return code: 0x80040e37 Stmt: [DROP INDEX MLICHECK.MLICHECK0 ]
ExecuteAndFlush: line 6324. hr: 0x80040e37 Cannot drop the index 'MLICHECK.MLICHECK0', because it does not exist or you do not have permission.
sloledb.cpp [ExecuteAndFlush,line 6324]: Error/Message: (err 3701, sev 11), Cannot drop the index 'MLICHECK.MLICHECK0', because it does not exist or you do not have permission.
Procname: [ExecuteAndFlush - no proc]
DbSlExecute - Error 103 (dbcode 3701) on DDLExecute
DbSlExecute - <DROP INDEX MLICHECK.MLICHECK0 >
License index MLICHECK0 not found( - ok)
ExecuteAndFlush return code: 0x80040e37 Stmt: [DROP INDEX MLICHECK.MLICHECK__0 ]
ExecuteAndFlush: line 6324. hr: 0x80040e37 Cannot drop the index 'MLICHECK.MLICHECK__0', because it does not exist or you do not have permission.
sloledb.cpp [ExecuteAndFlush,line 6324]: Error/Message: (err 3701, sev 11), Cannot drop the index 'MLICHECK.MLICHECK__0', because it does not exist or you do not have permission.
Procname: [ExecuteAndFlush - no proc]
DbSlExecute - Error 103 (dbcode 3701) on DDLExecute
DbSlExecute - <DROP INDEX MLICHECK.MLICHECK__0 >
License index MLICHECK__0 not found( - ok)
ExecuteAndFlush return code: 0x80040e14 Stmt: [DROP INDEX "MLICHECK~I1" ]
ExecuteAndFlush: line 6324. hr: 0x80040e14 Must specify the table name and index name for the DROP INDEX statement.
sloledb.cpp [ExecuteAndFlush,line 6324]: Error/Message: (err 159, sev 0), Must specify the table name and index name for the DROP INDEX statement.
Procname: [ExecuteAndFlush - no proc]
DbSlExecute - Error 99 (dbcode 159) on DDLExecute
DbSlExecute - <DROP INDEX "MLICHECK~I1" >
ERROR => DBSL statement where error happend:
   DROP INDEX ... [slicdb.c     2433]
ERROR       Can not drop license index MLICHECK~I1
TIME        Sun Apr 13 22:31:15 2008
RELEASE     700
COMPONENT   SLIC
VERSION     300
RC          99
MODULE      slicdb.c
LINE        504
DETAIL      DbSlExecute failed with return code 99
             Must specify the table name and index name for the DROP INDEX
             statement.
COUNTER     1
Old license index not dropped...(rc: -111)
Database vendor is MICROSOFT SQL
License table created
License table created (rc: 0)
Index for license table created
License index created (rc: 0)
License table created (rc: 0)
Go and create a temporary license
SlicIGetDate: <20080511>
SlicCalcLicenseKey: key db/prod = >TEMPLICENSERPDINITIAL   R3_MSS              20080511<
SlicIGetDate: <20080413>
License created as follows:
LICENSE DATA:
   systemname:      >RPD<
   hardware-key:     >TEMPLICENSE<
   productid:       >R3_MSS              <
   installation-nr: >INITIAL   <
   system-id:       >INITIAL_SY<
   userlimit:       >0<
   creation_date:   >20080413<
   expiration_date: >20080511<
   lcheck_date:     >19800101<
   lkey:            >8JU8CFNH4IKQLC7CJ2UUETJD<
   fprint:          >VTV96XNXYK97XYIA35ZFGISK<
Write license into database
The IRow interface is supported by this OLEDB provider
License >RPD< >TEMPLICENSE< >R3_MSS              < requested from db
License >RPD< >TEMPLICENSE< >R3_MSS              < not found in db
license does not exists, do a license insert
Try to insert inserted >RPD< >TEMPLICENSE< >R3_MSS              <
License inserted >RPD< >TEMPLICENSE< >R3_MSS              <
License written: >RPD< >TEMPLICENSE< >R3_MSS              <
Temporary License written into database
SlicSapInstall sap-msgserver license ok.
db_con_commit (con_da={R/3,0,0},th_commit=0,tx=1,hold_cursor=0)
DbSlDisconnect curr_thread_id: 1884 sl_conn[0]->thread_id: 1884
Disconnected from connection con_da={R/3,0,0}
Regards,
SAT

Dear,
If your problem not get resolved please check SAP Note 44958 - IDES installation 3.0C, saplicense
As per SAP Note its advised you can drop database index and continue with your installation.
Regards,
Nikunj Thaker.

Oracle 9i DB (90204) + Windows 2003 Ent R2 Server +D2k client

Greetings,
Hi gentlemen, i setup a new HP Proliant Server with the above configuration and a 4GB Ram.
I made use of /3GB /PAE in my boot.ini so as to let oracle use more than 2GB of RAM. My SGA is allocated with 2.5GB ram.
However, during production, i faced problem in which users has problem accessing the Oracle DB. This problem comes by only after certain times and it is normalised after i have restarted the Server. I could not pin point the problem as it is too intermittent.
I am really at lost now. Previously, I have no problem in running Oracle 9i DB (90204) with Win2000 Server.
I am trying to narrow down the problem but is quite lost as in where to start to do so. Can it be the problem with memory allocation? Or D2k Client? or i need to update with the latest Oralce patches?
Appreciate your kind help. Thanks

Hi gentlemen, i setup a new HP Proliant Server with
the above configuration and a 4GB Ram.
I made use of /3GB /PAE in my boot.ini so as to letWell, /PAE enables the os to handle a larger than 4 GB physical address space. Since thix box has only 4 GB RAM, are you sure you need to enable this flag? This "extension" has the ability to map more RAM, but this also means that more memory might be needed by the kernel to handle translation (virtual to real addresses) - maybe not in your case, but did you compare the impact/behaviour of using the different settings? There are other dependencies as well, e.g. the page file size. Anyway - you need to find out which route is best for your needs.
Have you looked at performance figures in Task Manager? What's your (average) Available number under Physical memory? Commit Charge Total, Peak and Limit while system starts to deteriorate?
However, during production, i faced problem in which
users has problem accessing the Oracle DB. This
problem comes by only after certain times and it is
normalised after i have restarted the Server. I couldWhat's the problem? What are the symptoms?
Did you find any error messages in alert.log or listener.log, possibly related?
You have gotten a good advice from Satish, that you need to make sure your configuration is not consuming too much...

PM7 on Windows 2003 Ent SP2

Similar Messages

Maybe you are looking for