PM8M3-V The LAN network is not appear on device manager and doesn't Work

After I reinstall the XP2 and install the MSI chipset drive the original CD
i cant see the device LAN network on device manager.
then i check the BIOS that On-board LAN Control is show Disable.
Then i change it to Enable and restart.
it cant boot the Win XP. It just showing (verifying DMI pool data) on black screen.
when i install new PCI network card, It just showing (verifying DMI pool data) on black screen also.
thanks for help!!!
Processor 3.2
PM8M3-V
1G DDR RAM
Built-In network

Did you ensure that the onboard lan is enable in bios? Quote
verifying DMI pool data
sound like a corrupt boot files or some failure hardware.

Similar Messages

  • G470 Bluetooth not listed under Device Manager and not working

    Hi,
    Can someone teach me how to solve my G470 problem?
    Its Bluetooth is not listed under Device Manager and I can't find it anywhere.
    Before that, it isn't working at all.
    Thanks
    Solved!
    Go to Solution.

    hi athirah11,
    Welcome to the Lenovo Forums.
    Can you try the following:
    1. Press the Windows key‌ +R, type devmgmt.msc and press Enter. On the Device Manager, click View > Show hidden devices and check if the Bluetooth device is being listed.
    - Link to picture
    - Link to picture
    2. If the bluetooth device shows up under the Device Manager, do the following:
        a. Under Control Panel > Programs, uninstall the Bluetooth driver/software (reboot if necessary)
        b. Run the Bluetooth Driver Installer
         -  this will identify the type of Bluetooth Device installed on the system (eg. Qualcom Atheros, Intel, etc.) and it will install a generic Bluetooth driver. If successful, the Bluetooth device and its components should now appear normally under the Device Manager.
    If the bluetooth device still doesn't show up, can you provide the model number of your G470 (eg. 59xxxxxx) fur further checking.
    Let me know how it goes.
    Regards
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • U300s Trackpad does not appear in device manager

    Recently I had an issue where I needed to reinstall windows. I downloaded a legitimate ISO and reinstalled it. When I went to reinstall all of the drivers, I had an issue with the TrackPad driver. I know it is a Cypress Touchpad. When I try to install the driver I get this error message: "Cannot find Cypress Trackpad!". It does not show up in the device manager (only my USB mouse is under the Mice and Keyboard menu.) My question is this: What can I do? I can't reflash the BIOS because I already have the latest one and WinFlash won't let you flash a BIOS with the same or earlier date on it. I have checked and the connection to the motherboard is very secure. What other options do I have? I'm not pleased in the least with this error. Any help is appreciated. I know computers well so if there are any solutions that are on the technical side, throw them at me! Thanks!
    As a side note, I used a generic (read: non-OEM) windows ISO because Lenovo does not have a customized (OEM-specific) one easily accessable online.
    System Overview:
    Lenovo U300s
    Intel Core i7-2677M @ 1.8Ghz
    4GB RAM
    Windows 7 64-Bit SP1

    Hi, I recently upgraded to win8.1 and accidentally made it a fresh install soo it was pretty fresh... haha
    Well, my touchpad was working but it wasn't recognized in the device manager, someone said that I may had to reinstall the driver that came installed when I bought it, Lenovo has them avaliable here: http://support.lenovo.com/en_US/downloads/default.page?#
    After installing it the icon appeared again and I had the options avaliable in the device manager and everything... I think that may be the problem.

  • HT201335 airplay icon not appearing, mountain lion installed and apple tv working with iTunes ???

    airplay icon not appearing, mountain lion installed and apple tv 2nd G  working good with iTunes ???
    i do not understand.

    Which MBA do you have? It needs to be Mid 2011 or later for ML mirroring to work.
    http://support.apple.com/kb/HT5404?viewlocale=en_US&locale=en_US

  • HP Pavilion dv6-3043ee Realtek Network Adapter not found in Device Manager

    Hi I own an HP Pavilion dv6-3043ee, 64bit and running Windows 7. And somehow the network adapter for the LAN got uninstalled for some reason. Now after posting something on the site I finally downloaded the driver for my laptop.
    Now another problem, after or at the end of the installation process a pop up message was shown:
    "The Realtek Network Controller was not found,
    If Deep Sleep Mode is enabled Please Plug the Cable."
    Now I checked Device Manager to see if the Realtek Network Adapter was there but it wasn't. All I can see are:
    -Atheros AR9285 802.11b/g/n Wifi Adapter
    -Bluetooth Device (Personal Area Network)
    -Bluetooth Device (RFCOMM Protocl TDI)
    -TAP-Windows Adapter V9
    Someone please help. Thank you.

    If device is identified but there is no driver for it, it will be appeared as unknown device in Device Manager with question mark icon (?), are you seeing such thing in device manager?
    If not, you should refer to your PC manufacturer's website and download.
    Make sure report this issue using Feedback App.

  • IPod touch 5th gen will not connect to iTunes, also apple mobile device usb driver does not appear in device manager. PLEASE HELP.

    I recently purchased my iPod touch with no issues. After updating to iOS 8.1.1 I found that my iPod would no longer appear in the latest version of iTunes and when I searched for Apple Mobile Device usb driver in the device manager, it was nowhere to be found. I've already uninstalled and re-installed ALL components of iTunes and read every single help article. I've tried everything. What went wrong?

    See
    iOS: Device not recognized in iTunes for Windows
    - I would start with
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    or                     
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    However, after your remove the Apple software components also remove the iCloud Control Panel via Windows Programs and Features app in the Window Control Panel. Then reinstall all the Apple software components
    - Then do the other actions of:
    iOS: Device not recognized in iTunes for Windows
    paying special attention to item #5
    - New cable and different USB port
    - Run this and see if the results help with determine the cause
    iTunes for Windows: Device Sync Tests
    Also see:
    iPod not recognised by windows iTunes
    Troubleshooting issues with iTunes for Windows updates
    - Try on another computer to help determine if computer or iPod problem

  • Network Controller not showing in Device Manager

    I have this wifi card in my pc: 802.11 wireless b/g/n PCI-Express x1 card Figure 3: Wireless card - side viewInterface type: PCIData transfer speeds: up to 300 MbpsTransmission standards: 802.11 b/g/nSupported antenna connections: Either 2 internal antennas or 1 external antennaOperating band: 2.4 GHz to 2.5 GHzSupported security protocols:WPAWEPAn antenna is attached with this card with help of 2 wires coneccted through screws at back of cpu. My problem is that earlier when I bought pc in 2010, it used to show wifi connections around in internet icon in taskbar but after few days it stopped showing wifi connections means it stopped catching wifi connections. When I surfed net for this problem, I came to know that Network Controller driver should be installed in my system for wifi card to work but when i ipen device manager, no NETWORK CONTROLLER or OTHER DEVICES tab is found(screenshot below.   So do i have to install some drivers or is there any other solution?? ..............., please help !!!!

    Is there anybody who can solve my problem ? please....

  • My internal webcam on HP EliteBook 8460w not detected in device manager and not detected by driver

    Hello all...
    I just bought HP EliteBook 8460w, after I installed all the program and driver I find out that the internal webcam is not working. When I have check in the device manager the webcam is not listed. Then I tried to download the newest software/driver of it, it appears a message box that mention the webcam is not detected, please enable it from the bios. Then I checked from the bios, the webcam is not listed to be enable. Afterward, I was wonder maybe the bios is not up to date. Then I updated the bios, but still after I checked, the webcam is still not listed to be enable.
    So please if anyone have the same experience or might know some answer or solution for it, I would be very happy to try. Its starting to get on my nerve.
    Thank you very much before....
    Cheers,
    Denmuh

    Hi, I figured out how to get the camera working on my 8460w laptop.  I am running Windows XP SP3.  No guarantee this is what will fix yours, but here's what I did:
    I installed these two drivers from the HP.COM site:
    First -HP Universal Camera Driver
    link: http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=32...
    Second -HP High Definition (HD) Webcam Firmware
    link: http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=32...
    Control Panel - System - Harware - Device Manager
    Under Imaging Devices category, look for an existing camera device line.
    Uninstall this device.
    Then after a few moments, Windows recognized the camera again and automatically installed it with the right drivers (since it is really just a device connected through an internal USB port).
    Hope this helps you too.

  • My Time Capsule's 5GHz network does not appear as a network any longer. Airport utility is 5.5.3 and iMAC is 10.7.1 The TC appears to be configured correctly in the utility screen.

    My Time Capsule's, only the 5GHz network, does not appear as a network any longer. Airport utility is 5.5.3 and iMAC is 10.7.1 The TC appears to be configured correctly in the utility screen. This began sometime after upgrade to 10.7.1 however this does not explain why either of my iPAD's does not see the 5GHz network.

    Wish some Apple folks would chime in...
    Apple is not here. Even if they might rarely monitor these boards, they will not respond. We're all users, just like you.
    Suggest that you open Macintosh HD > Applications > Utiltiies > AirPort Utility
    Click Manual Setup
    Click the Wireless tab below the icons
    Click the Wireless Options button
    Check one more time to see if you still have the 5 GHz Name option enabled. If not, enter a check mark and click Update to save the new settings.
    If 5 GHz is enabled, temporarily disable the setting and Update. Then go back in and enable the setting again.
    If you still cannot "see" the network from any device, about all that you can do at this point is reset the Time Capsule back to factory defaults and try the configuration again to see if it will "take". Lion is causing some strange issues, and this may be another.
    If this is not successful, then it's time to contact Apple support or arrange a visit to an Apple store to let them take a look

  • G500 - Bluetooth not listed in device manager

    Hi,
    Bluetooth is not listed under device manager
    it doesn't appear in pc settings/pc and devices neither does the bluetooth switch appears une aiplane mode
    my model;
    product: 20236
    serial: xxxxx
    thx
    Moderator comment: Serial number(s) removed to protect member from mischief.

    Hi guys,
    I see that Shiv_K is helping you out on this
    In addition. 
    Try to refresh the Hardware and Power.
        Remove AC and Battery
              Hold the Power Button down for at least 15 sec. Then Reconnect Everything back
    Turn on the Systen and Right away start hitting F2 to load the BIOS Utility
              Inside BIOS hit F9 then Enter for Yes to load defaults
              Hit F10 to Save and Exit then Enter for YES.
    now open
        Control Panel / Programs, and uninstall Lenovo Energy Management and restart the system
    Then install these
    Lenovo Energy Management
    Intel Wifi Driver
     Press Fn+F5 and see if you will be provided with this window showing the bluetooth..
    Spoiler (Highlight to read)
     Hope this helps,
    Cheers
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • In the networking window the Computer item does not appear

    I have network sharing turned on but the Computer category does not appear in the networking window.  Any ideas how to add this category to the network window in windows 8.1?????

    Mfrakes,
    It’s possible that you’re not seeing the computer category simply because there aren’t any computers to list. 
    Make sure that the computers you’re expecting to see are powered on and connected to your network. 
    Another thing to ensure is that network discovery is enabled.
    In order to enable network discovery in Windows 8.1, start by right-clicking on the Network system icon in the taskbar notification area, then click on Open Network and Sharing Center. 
    Next, in the left pane of the Network and Sharing Center window, click on the Change advanced sharing settings link. 
    The next window that comes up will give you the option of turning network discovery on.
    I hope this helps!
    Mike
    Windows Outreach Team – IT Pro

  • HT1349 before i do updates for my iphone(to 5.0.1) i close my SIM card, i can not complete the update proccess  becouse SIM is closed also i can not activate iPhone becous the SIM must be opened. when i try to open it , the networks does not appear (no se

    before i do updates for my iphone (to 5.0.1) i close my SIM card, i can not complete the update proccess  becouse SIM is closed also i can not  activate iPhone becouse the SIM must be opened. when i try to open it , the networks does not appear (no service).

    Its a serious problem and many people are facing the same issue on both locked and factory unlocked phones.
    I wonder when Apple will address to this issue. After all it is losing all its reputation!
    See this thread, many users are encountering the same issue:
    https://discussions.apple.com/thread/3425746?start=75&tstart=0
    I believe its a software issue and could be solved asap Apple fixes it!

  • HT3867 I am connected to the hotel wifi network, but the login screen does not appear.

    Hi,
    I am connected to my hotel wifi network, but the login screen does not appear. I am able to access the login page on my PC, but on the iPhone it does not appear and just tries to connect to the webpage (e.g. google.co.uk), and eventually gives up. I've tried opening pages in Safari and Chrome, but none cause the login screen to appear. I have also tried trying to log into the login page that the PC opens when connected to the wifi, but the same thing happens. I am using a iPhone 3G with the latest iOS version 6.0.1.
    Is there a way to make the iPhone try to open the login page?
    Ben.

    I have the exact same problem as the original poster and I tried many times already the solution proposed by trstark66 and it's still not working. It's not working for both my iPad and iPhone 5. I'm using the latest iOS version available all the time. I have my iPad since 3 years and my iPhone since 1 years and I always had that problem. I'm an airline pilot so I'm always in hotels. I asked my colleagues who also have iPhones and iPads and they all have the same problems from time to time. And when I go in an apple store they all say that it's the first time they hear about that problem. I never have that problem with my PCs, my previous phone and my BB playbook. Only with my iPhone and iPad....since now 3 years...Always the same problem. I'm connected to the Hotel Network, I have an IP address but nothing popup to register with a user name, password or just to access the "I have read and accept the condition.../connect". And when I go in Safari or other Browsers, I am not redirected to a login page. All I have is a message saying cannot access the webpage because I'm not connected to Internet. I tried already hard resets, on/off Wi-Fi, automatic connexion off, forget this network, reset network setting...
    My solution for now is to use my Boingo account. I connect to the hotel Network and then I use the Boingo app to connect to Internet.
    But, sometimes it works the first time or suddenly for no reason.
    Very funny, I was using Boingo on my ipad to write this message in my Hotel room because I was unable to use my free connection as usual. When I tried to press "Add Reply" it failed and I had the message "An error occured while trying to submit your post, please try again". The reason was that boingo was disconnected since I was taking too long to write this message. So I wasn't connected to Internet anymore. I opened a second tab in Safari and what did I see!... the login page to access the free connection from the hotel. This is crazy. Apple, you really suck with hotel/coffee hotspots... I tried for hours and nothing, now hours later I just open a new tab and it works. But tomorrow I know I will try the same and it will not work again. It shouldn't be that complicated.

  • Pages is not saving document correctly.  After saving the changes either do not appear or you can not open the file. The error is "not a valid format"  I am in Pages '09 4.1 (923).  I also use Parallels.  Anyone having similar issues?

    Pages is not saving document correctly.  After saving the changes either do not appear or you can not open the file. The error is "not a valid format"  I am in Pages '09 4.1 (923).  I also use Parallels.  Anyone having similar issues?

    I'm not sure that Lion AutoSave feature apply to network servers.
    I'm just sure that the Versions feature doesn't.
    Yvan KOENIG (VALLAURIS, France) samedi 21 janvier 2012
    iMac 21”5, i7, 2.8 GHz, 12 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.2
    My Box account  is : http://www.box.com/s/00qnssoyeq2xvc22ra4k
    My iDisk is : http://public.me.com/koenigyvan

  • Why in the layer options does not appear to me "video layers" why? help

    why in the layer options does not appear to me
    "video layers" why? help
    I need to encourage and not because my computer does not appear to me and others computers that has the same photoshop cc if that option appears. It would be helpful to know what thanks

    99.9% of the time, the cause of this issue is the fact the phone was jailbroken/hacked to unlock it for use on networks other than the network the phone was originally locked to. Apple maintains a database of officially unlocked iPhones, and when Apple's servers detect phones such as yours, activation stops & you get the message you got.
    So, either get a sim card from the carrier your phone was originally locked to, or get it officially unlocked, if you want to activate it. Because it appears that it was not officially unlocked

Maybe you are looking for

  • How to populate a session value into a ADF form InputText

    I have the user name of the person that has logged in as a session variable and what to popluate the created by and/or last updated by columns in an ADF form 10.1.3.0.4 I tried to load in the save action by adding FacesContext fc = FacesContext.getCu

  • After data recovery, HD is a mess

    I recently had my hard drive die on my powermac G5 and my Clickfree external backup hard drive also failed. Sob! I sent the dead drive to a data recovery service and they say they restored everything. Send back my restored data on an external hard dr

  • How to get the component who has caret?

    I put more than one JTextField on the Panel. I want to get the one who owns the caret of synchronized.

  • Regarding ORA-01102 ORACLE COULD NOT MOUNT DATABASE IN EXCLUSIVE MODE.

    Hellow Friends, I was testing my recovery strategy for control file. Out of two my control files I deleted one and tried to start when oracle gave me error that could not find so and so file in such and such location. I than copied first member which

  • We need to reinstall the JAVA part alone in ABAP+JAVA

    Dear Sir/Madam, We have an SAP ECC 6.0 system with ABAP+JAVA components. Now there are some issue with our Java comp. and I'm unable to start the JAVA engine. As we have done little configuration on JAVA side we are planning to reinstall the JAVA par