Pm8pm-v (ms-7222) general overclock questions

Im relatively new to overclocking, Ive overclocked athlons several years ago but Im pretty much a novice as yet (fast learner)
I have the pm8pm-v motherboard (whch I know aint the best for o/clock)
I intend to overclock using clockgen as there are no other methods of overclocking this board. (although I have been told msi have a bios for this with overclocking enabled)
The processor is pentium d 930
I would like to raise the fsb ideally to get clock speed running in the region of 4.0Ghz x 2
I have read about the 930d being clocked in the region of 5.5-6.0 ghz with the right equiptment, but clocked to 4.25Ghz x 2 using standard intel cooler.
I have the standard intel socket 775 cooler
the ram is hynix 1gb ddr2 pc5300 (667)
the ms-7222 can only support ram up to 533mhz so is there overclocking potential with the memory?
the motherboard states it can support fsb up to 1066mhz, am I right in thinking my processor runs at 800mhz fsb, so there is some room for overclock motherboard wise?
currently my processor temperature is 32.0c restng, and 38.0C so there seems a good buffer temperature wise to overclock
is 4.0GHz x 2 achievable with my setup? should I just raise fsb in increments of 5, i.e 200fsb, now 205fsb? what speed is relatively safe to clock the ram up to bearing in mind the motherboard only supports 533mhz as standard?
any general advice or comments will be gladly appreciated,

do >>Clear CMOS Guide<< with power cord removed

Similar Messages

General dreamwevaer question

hello dreamweavers.
im a newbie going to use dreamweaver from next week and beyond,so id like to ask the following:
should i design the website in photoshop and then import it into dreamwevaer,in order to code it?
is dreamwevaer flexible in design point of view,or is it mostly getting finished designs such as headers,footers,flash banners,
and then building up the site where things so and such.
thank you.

Hello Nancy.
seems like an informative website,i can see it is easy to understand the
basics.
Στις 23 Μαρτίου 2012 4:29 π.μ., ο χρήστης Nancy O. <[email protected]>έγραψε:
Re: general dreamwevaer question created by Nancy O.<http://forums.adobe.com/people/Nancy+O.>in
Dreamweaver - View the full discussion<http://forums.adobe.com/message/4283588#4283588

General overclocking / set up questions

I have been reading as much as I can and trying to learn the ins and outs of overclocking. I am confused on one point though.
Alright, when you raise the base fsb clock your ram speed / cpu frequencies both raise based on the multipliers you have used. Now, isn't it better to lower the multiplier and jack the hell out of the fsb/hyper xport?
My example is this:
board msi 870s-g46 , athlon IIx4 645, 8 gb pc-1333 vegence ram
Currently I have it running at:
CPU: 3720 mhz (v: 1.45)
Ram: 800mhzx2 (v: 1.5) (9-9-9-24 timing)
FSB: 240 x 10
1.)Here is where my confusion sets in, is it better to raise the FSB clock and lower the multipliers to keep the cpu / memory where it is currently?
2.)How tolerant are the mainboards/cpu (My set's base clock has a range to 600+) to increased FSB settings?
3.) If the fsb increases, but the multiplier is lower to keep the cpu freqency stable, what do i need to do if anything in regaurds to the cpu/memory voltage and memory timing.
4.) If i lowered the multpliers / ratio would I even be able to get the fsb fast enough to regain the current memory / cpu frequencies?

The mysteries of which is better :D
Memory is normally best left alone and kept as close as possible to its standard SPD until all other OC'ing has been maximised. Overclocking memory is the one component that causes more frustrating instabilities than any other, and that for a really miniscule gain.
I go with the group that minimises CPU multi to find the boards max FSB first.
Then I reset the FSB and find the max CPU multi.
Then max the FSB again and try and find the CPU multi. Problem here is, the CPU multi causes large changes at high FSB settings. So when you start getting the dreaded BSODS during the CPU multi increases, you may find that a slight reduction in FSB may allow you one notch more on the CPU multi, giving you more core frequency than at the higher FSB.
Thats the part where only you can find the optimal set up for your unique hardware combo.
Quite frankly, in real life you won't notice a difference whether you have a high FSB or a high multi if the resultant core clock is the same. You need to test to see which one "feels smoother".
Higher CPU multis produce more CPU heat. Higher FSB results in higher chipset and component temps. Your choice.
After all that you can attempt to tweak your memory, but the gain from that is minimal compared to the other OC settings.

No oveclocking the PM8PM-V (MS-7222) even though the manual says yes.

Hello
I have a New PM8PM-V with Intel Pentium D 840 3.2 CPU.
The system has the latest BIOS and drivers, via live update...
The systems works great and I have no issues, with running my apps, but here is the issue.
I bought this Mobo because the manual stated it can be overclocked. The BIOS does not support any over clocking at all, so I tried the utility that came with the mobo
I tried
V-Center
Core Center
Dual Core Center
the software installs fine, but when i try and run it, I get a message that says "MOTHER BOARD NOT SUPPORTED"
When I look at the included text file, the mobo (MS-7222) is NOT listed in the file as supported
I got these utilities files from the PM8PM download area on MSI site, so these are utilies that are made for the mobo, yet they say they are not supported.
I download the ones from here
http://www.msi-korea.co.kr/program/support/utility/utility_detail.php?serials=177&uid=PM8PM-V&part=1
I also tried the newer version located here
http://www.msi.com.tw/program/support/software/swr/spt_swr_list.php?kind=1
When I run V-Center it pops up and then closed
When I run Core Center or Dual Core Center I get the Mono not supported error.
I really need to overclock this mobo, so is there any other utility that supports this motherboard and PLL chip?

What exacly does the manual say/state for overclocking an how (via bios , via application or what)
Could you quote what it states .
An option is always to load the initial bios version ( this if often what the manual is based on) .
Though to do this you have to flash bios manually (not liveupdate) with initial/first bios version downloaded from the boards bios page.

A few general agent questions

We've been asked some general questions by our agents that I have been unable to find answers for, (although 4 and 5 are likely working as designed). We are running IPCC Express 7.0(1)SR05_Build504 and these are all phone agents. We do not run the agent desktop client. Any assistance in answering these questions would be greatly appreciated.
1. TransfertoVM softkey "grayed out" while on a CSQ call. Can it be enabled?
2. While logged in to CSQ, is there a way to start dialing prior to
lifting the receiver?
3. Is it possible to handle more than one CSQ call at a time, e.g. put a call on hold and answer
another CSQ call.
4. Upon selecting Agent Login (single-button login), can the agent automatically be put into Ready?
5. Upon Logout, can the phone be returned to the main screen, rather than getting the manual agent login screen?
Again, any assistance in answering these questions would be greatly appreciated.
Thanks,
Roger

Hi
1) Isn't that an IPMA softkey? Never tried it, but whilst it's not in the 'unsupported' list, I wouldn't expect using any IPMA features in conjunction with CAD would get you good results. If it doesn't cause you stuck/ghost calls, I would expect erroneous reports...
2) Being logged into a CSQ doesn't affect the way the phone works.
- You can dial the number then either lift the handset or hit dial (for speakerphone)
- You can press speakerphone or headset then dial
I guess what you are referring to is if you are using the IP Phone Agent in conjunction with a headset? If you are, then the IPPA usually obscures the 'new call' and 'end call' softkeys that you might use if you leave the headset button lit. I guess this isn't the case, as you refer to lifting the receiver? Unless you have motorized lifters.. If that's what you have, you can try getting users to either :
- Manage their onhook/offhook state using the headset key as if it was the speakerphone key (i.e. press it to hang up or pickup)
- Use a headset/phone combination that supports HHC
- Switch to CAD, or CAD-BE if you can't install PC software for some reason.
3) No. The system is designed specifically so that this should never happen.
4) No.
5) Again, no... you can't customize the BIPPA service... If you use CAD or CAD-BE this wouldn't be an issue.
Regards
Aaron
Please rate helpful posts...

Workflow and General Use Questions

Hello,
I'll apologize right off the bat for these novice question because I'm sure the information is probably somewhere in the forum, I just haven't been able to find it. I just purchased Aperture after completing the demo as my library is getting too large to manage using standard file folders. I'm now trying to figure out the best practices for workflow and general use before I invest some serious time into importing and keywording all my pictures.
1) Store files in the there current location, or in the Aperture Library? It seems to me that once they are moved to the Aperture library, you can only access them from within Aperture. I'm thinking I would be better off leaving them in their current location. For one, if I want to quickly grab a picture as an attachment to an email or something it seems easier to grab it from the standard folders. Second (and more important) I do not have room to keep all my pictures on my Macbook, thus most of them are stored on the Time Capsule.
So... Keeping photos in their current location appears to be the best choice for me even though it adds an additional step every time I bring in new photos from my camera. Does this sound right?
2) Is there a way to mark the photos that I have uploaded to my website (Smugmug)? Ideally, I would like to badge photos that have already been uploaded so I can quickly recognize them and ensure I'm not duplicating. I've considered using the rating, or keywords to indicate that a photo has been uploaded but both methods have disadvantages.
3) Any suggestions for general workflow and organization resources (tutorials, books, websites, etc.)? I've looked at the videos on Apple's site but they obviously didn't get that detailed.
Thanks for the help, sorry for the length.

I recommend to Manage by Reference with Master image files stored on external hard drives (note that Aperture defaults to a Managed-Library configuration rather than a Referenced-Masters Library). Especially important for iMacs and laptops with a single internal drive. The workflow as described below in an earlier post of mine uses a Referenced-Masters Library.
I feel pretty strongly that card-to-Aperture or camera-to-Aperture handling of original images puts originals at unnecessary risk. I suggest this workflow, first using the Finder (not Aperture) to copy images from CF card to computer hard drive:
• Remove the memory card from the camera and insert it into a memory card reader. Faster readers and faster cards are preferable.
• Finder-copy images from memory card to a labeled folder on the intended permanent Masters location hard drive.
• Eject memory card.
• Burn backup hard drive or DVD copies of the original images (optional strongly recommended recommended backup step).
• Eject backup hard drive(s) or DVDs.
• From within Aperture, import images from the hard drive folder into Aperture selecting "Store files in their current location." This is called "referenced images." During import is the best time to also add keywords, but that is another discussion.
• Review pix for completeness (e.g. a 500-pic shoot has 500 valid images showing in Aperture).
• Reformat memory card in camera, and archive originals off site on hard drives and/or on DVDs.
Note that the "eject" steps above are important in order to avoid mistakenly working on removable media/backups.
Also note with a Referenced-Masters Library that use of the "Vault" backup routine backs up the Library only, not the Masters. Masters should be separately backed up, IMO a good thing from a workflow and data security standpoint.
Max out RAM in your MB and keep the internal drive less than 70% full.
Good luck!
-Allen Wicks

Newb Overclocking Questions?

I'm just started overclocking and have a ram question. My ram, which is only Corsair 512x2 Value Select, shows that it's running at 2.5, 3, 3, 8, 2T. Now if i'm overclocking i want to lower or raise these numbers to make everything more stable? I thought you would want to tighten them, make them lower, but i'm confused after reading some stuff if i actually want to raise them since i'm overclocking the cpu.
Also there are two different types of voltages (or at least numbers i can raise one reads like 66 right now the other is a straight voltage, i believe it's at 2.5V right now) for my AGP card, which from what i'm hearing is something i would need to raise as well when overclocking, what's the diffrence between these two? I realize one is a voltage, what's the 66 number one for? thanks

66 stands for 66 mhz which is the speed the agp slot works at.
on some boards you need to set it to 67mhz for the agp lock to work.
Quote
2.5, 3, 3, 8, 2T
if overclocking memory you can try 2.5-4-4-10-2T or 3-4-4-10-2T

General BADi question:Call BADi in background job/batch input. Possible?

Hi out there,
i'm using thoe following BADi: /SAPSLL/CTRL_SD0C_R3 (Global Trade Service).
But also, this question is a general question.
If we are calling on screen the transaction VF01, the BADi is called correctly.
But unfortunately it seemes that the BADi is NOT called (im not really sure, cause i can't debug the background task) when we are calling a batch input sequence wth f.e. form bdc_transaction VF01 nothing happens.
Maybe BADi cannot be called in a background task? If it's possible, how could it be monitored. Thare isw no spool entry or anything like that!
Any answer can help.
Thank you in advance!
Regards,
Timo
Edited by: Timo Ehl on Apr 14, 2009 7:27 PM

Hi,
generally BADIs are called in background mode. You can use the following trick to debug your BADI. You just need to create an infinite loop in your BADI implementation. Something like this.
DATA: l_a TYPE c.
WHILE l_a IS INITIAL.
ENDWHILE.
Obviously when your BADI is called in background mode then program will get into infinite loop. You can easily connect and debug running programs from transaction SM50. You need to select your background process and go to Program/Session -> Program -> Debugging. You will jump directly into your BADI methos with infinite loop. Then you will just set value to l_a and you will start debugging your BADI. If you can not find any process then your BADI is not called in background mode.
Cheers

A general OOP question

Hi
I have a general OOP design question, and am wondering if someone could relate an answer to the following design?
I have a class called MediaFolderImport(); - it's designed to build a window with various editing tools in it.
Within it's constructor, I'm calling a bunch of functions to build the window...
   createTitle();
   createInstructions();
   createToolPanel();
   createDataGrid ();
   createOpen();
   createSave();
In my document class, I instantiate it...
public var File_Folder_Import:MediaFolderImport=new MediaFolderImport();
and then...
addChild(File_Folder_Import);
Voila! - the window appears. I WAS very proud of myself.
Now I want to access something inside the window. Specifically, there's a radio button that was created in createToolPanel(); - I want to update it to be selected or not selected when I receieve the user's preference from an xml settings file at start up (xml is loaded into the doc class).
General question:
What is the best practice, smart way to have designed this?
- call createToolPanel(); from the doc class instead of within MediaFolderImport();, and somehow (magically) have access to the radio button?
- leave the design as is, but add some sort of listener within MediaFolderImport that listens for changes to the xml in the doc class, and updates accordingly?
- do it the way I'm trying to, ie try to access the radio button directly from the doc class (which isn't working):
File_Folder_Import.myRadioButton.selected = true;
- a better way someone can briefly explain the concept of?
Another way to explain my design is...
- a bunch of different windows, each created by a different class
- xml file loads preferences, which need to be applied to different tools (radio buttons, check boxes, text fields etc) in the different windows
I read a lot of posts that talk about how public vars are mostly bad practice. So if you are making your class vars private, what is the best way to do the kind of inter-class communicating I'm talking about here?
I think someone throwing light on this will help me solidify my understanding of OOP.
Thank you for your time and help.

You're already very used to using properties for the built-in AS classes and that's the best practice means of configuring your class. It's a "state" that you want to simply expose. The get/set method moccamaximum mentioned is the ideal route.
The main reason you want to use get/set functions is validation. You want your class to act properly if you send an invalid value. Especially if anyone else besides yourself is going to use the class. Plan for the worst.
The general concept is, make a private variable for any 'state' you want to remember using an underscore in the variable name to easily identify it as a private var, then make get/set functions with the same name with any required validation without the underscore.
e.g.
package
     public class MyClass
          // property called 'mode' to track something with an int
           private var _mode:int = 0;
          public function MyClass() {} // empty constructor
          // get (type enforced)
          public function get mode():int { return mode; }
          // set, requiring a value
          public function set isChecked(modeVal:int):void
               // if no value is sent, ignore
               if (!modeVal) { return; }
               _mode = modeVal;
Your validation will go a long way to easily debugging your classes as they grow in size. Eventually they should throw exceptions and errors if they're not valid. Then you will be best practice. Do note that if your validation requires quite a bit of logic it's common to upgrade the property to a public method. get/set should be reserved for simple properties.

Best Font for Subtitles? and other General Subtitling questions?

I've never had to use subtitles, until my current project, so I am looking for some general advice and suggestions.
I will be using PPCS3 (on XPpro) as the subtitles (as in the kind that translate a foreign language) will be permanent.
So here are my questions:
1. What is the best font and or what is the most standard font for subtitles? (Font size and other characteristics may be worth mentioning here too.)
2. Is it possible to have an outline around the text as opposed to shadow?
3. What are some general rules of thumb for subtitles that apply to broadcast and cinematic productions?
Thank you.

See also:
FAQ:Why are my titles blurry/wrong?
Cheers
Eddie
PremiereProPedia (
RSS feed)
- Over 300 frequently answered questions
- Over 250 free tutorials
- Maintained by editors like
you
Forum FAQ

Writing games for US wireless carriers - general newbie question

I am a newbie to kvm and j2me so excuse me if these question are very basic or if i'm asking the wrong questions.
I have been asked to quickly research writing games in java for US wireless carriers. Ideally I'd like to pick a carrier (e.g. Verizonwireless) and find out more about writing for them. How should I go about researching this?
My research so far has found:
General j2me info:
I did some initial searching in the forum and found that the following link will give me a basic guide to j2me:
http://access1.sun.com/SRDs/access1_srds.html.
If I look at the documentation for -
- Java 2 Micro Edition (J2ME)
- Mobile Information Device Profile 1.0.1 (MIDP)
Is this still the best place to look at online?
Specific wireless carrier info:
I had no luck finding where I should look for information on specific
wireless carriers. Any suggestions? Also am I approaching this the right way or should I be looking at the specific java enabled mobile phones rather than the wireless carrier? Or is it a combination of the two?
Thanks for any help.

If the games are going to be networked then you should find out what type of network the carrier has (TDMA,CDMA,GSM with or without GPRS, etc. what bandwidths.... WAP or I-Mode). Regardless, you should be also concerned with what are the phones available on the carrier and what is their Java support.
shmoove

Some general photo questions

I will be undertaking a major project soon that involves scanning all (and I mean every single one) of my family's photographs so that we have digital copies in case something bad happens to the originals. I plan on using iPhoto to store and catalog the photos. But my question is, when I scan the photos, what file format should I use? My scanner (HP Scanjet 3970) can scan to jpeg, tiff, tiff (compressed), bmp, and gif. which of those should I use? Also, I read somewhere that tiff for macs are different from tiff in windows. Is this true?
Also, what resolution is optimal for keeping an archive of photos? File size is not really an issue since I'll be using an external hard drive that's plenty big.

baldrambutan
what file format should I use? My scanner (HP Scanjet 3970) can scan to jpeg, tiff, tiff (compressed), bmp, and gif. which of those should I use?
iPhoto will handle any of those formats. My suggestion for maximum compatibility is to choose between tiff (uncompressed) and jpeg. Why? they're pretty universal, regardless of computer. As to choosing between them? Well jpeg is a lossy compressed format, tiff isn't. The files sizes are huge with tiff, quite acceptable with jpeg. How much editing will you do? IF not much, then there is little re-saving and jpeg will be absolutely fine.
http://en.wikipedia.org/wiki/TaggedImage_FileFormat
http://en.wikipedia.org/wiki/JPEG
Also, I read somewhere that tiff for macs are different from tiff in windows. Is this true?
Not that I know of.
Also, what resolution is optimal for keeping an archive of photos
The general rule of thumb is 300 dpi is what's required for printing. Screen images require less.
Regards
TD

Overclocking Questions

Hello all,
I know i'm going to ask some n00b questions about overclocking but if someone could give me some answers i would be grateful.
So here are my puters specs:
MSI K7N2 Delta L mobo
AMD Athlon XP 2600+ @ 2.08Ghz FSB 333Mhz
512MB Ram @ 333Mhz Generic Dual Channel (2X 256MB)
Heatsink Thermaltake VOLCANO 11 – Xaser Edition
What should i do to overclock the CPU without unlocking it (if it is possible).
Can i do it only by altering the FSB speed?
Also what should i do with the RAM and the AGP, PCI Bus?
Thank you in advance and Merry X-mas to all

Where do I access all of these OC options (like FSB:RAM ratios, 'Performance Mode', and all the other crazy stuff this board has? And don't tell me the BIOS, I've been there, done that. Do I need to update my BIOS? (I'm using the one that came with the 875P)
Here we go:
2.4 GHz Pentium 4 processor with 800MHz FSB and HT
Sapphire Atlantis 128MB Radeon 9600Pro GPU
512MB(2x256) Kingston HyperX DDR400 RAM
MSI 875P Neo 2 Motherboard
120GB Serial ATA Maxtor Hard Drive
Creative Labs SoundBlaster Audigy2 Sound Card
Creative Megaworks 5.1 THX surround sound
16x LiteOn DVD drive
48x24x48 LiteOn CD-RW drive
400 Watt Foxconn Power Supply
19" Viewsonic P95f+ CRT
Chieftec Black Case
Logitech MX700 Rechargeable Wireless Optical Mouse
Logitech Elite Multimedia Keyboard
Cyberpower 825AVR UPS
And a floppy drive!
Cooling is stock, but I have a bunch of case fans and good air circulation.
As far as overclocking, I'm looking to go for about 3GHz (It sounds reasonable to me).
Thanks.

Aspire R11 (R3-131T): Locating the SSD and other general upgrading questions

So, I managed to find the RAM with no problem, but I can't find the SSD. I'm starting to think it is just integrated into the motherboard, but at the same time, I'm told I can upgrade it.

Questions:
1) how do I upgrade the size of the SSD?
2) there is this small area next to the motherboard. The void is filled with a metal brace. Can a SSD be placed there? And if so, how would I connect it to the motherboard?
3) can the CPU or GPU be overclocked? I understand that there is no fans, so it would have to be minor overclocking.
4) is there a way to increase cooling, whether that be via fan or heat sink?
5) aside from the SSD and RAM, is there anything else that can be upgraded?

General iPhone Questions

Hello! I'm new, and I have a few questions about my new iPhone 3G. I'm hoping that this is the best place to ask them. A lot of these are shot-in-the-dark "Do they have this feature?" questions. Please answer whichever questions you can, and I'll try to figure out how to work this forum's points system and repay you!
Is there a way to turn off the Safari browser history? I turned off the Google search engine history and I know how to clear my Safari browser history, but I don't know how or if you can disable it completely. I also know about the "Broswer" app, but it doesn't save history at the expense of not saving passwords either.
Is there any way to set up a randomized wallpaper that changes each time you start your phone? Is there a way to set up a different wallpaper for each page of apps?
I see you can make grey background app folders, and you can fit a max of 16 apps/folders per page and 4 more at the bottom. Is that the default?
Is there any way to add a passcode lock to individual apps? I would love if, when you enter your start-up passcode to enter your iPhone, a certain password unlocks your phone normally while another password could enter a "guest" version without personal contacts or other personal data - but I doubt that's possible.
Is there a way to make Google as a homepage that opens by default when I open my Safari browser?
What exactly is airplane mode? I saw on a site that it blocks calls and texts? Is that right? Do you still get a general notification is someone calls or texts you?
The upper-left button on the side of the iPhone mutes it and turn vibrate off, right? How do you set your phone to vibrate only when you receive a call or text?
Is there a way to do a complete phone backup so I wouldn't lose any data if I lost my phone and then purchased a new one?
How to I transfer the iTunes music I've purchased on my iPhone into the music library on iTunes on my computer?
Thanks in advance!

Tim iPhone Fan wrote:
Hello! I'm new, and I have a few questions about my new iPhone 3G. I'm hoping that this is the best place to ask them. A lot of these are shot-in-the-dark "Do they have this feature?" questions. Please answer whichever questions you can, and I'll try to figure out how to work this forum's points system and repay you!
Is there a way to turn off the Safari browser history? I turned off the Google search engine history and I know how to clear my Safari browser history, but I don't know how or if you can disable it completely. I also know about the "Broswer" app, but it doesn't save history at the expense of not saving passwords either.
http://support.apple.com/manuals/iphone/#iphone
Is there any way to set up a randomized wallpaper that changes each time you start your phone? Is there a way to set up a different wallpaper for each page of apps?
No.
I see you can make grey background app folders, and you can fit a max of 16 apps/folders per page and 4 more at the bottom. Is that the default?
http://support.apple.com/manuals/iphone/#iphone
Is there any way to add a passcode lock to individual apps? I would love if, when you enter your start-up passcode to enter your iPhone, a certain password unlocks your phone normally while another password could enter a "guest" version without personal contacts or other personal data - but I doubt that's possible.
Not that I am aware, Yu can check the manual. There may be 3rd party apps that allow password protection.
Is there a way to make Google as a homepage that opens by default when I open my Safari browser?
What exactly is airplane mode? I saw on a site that it blocks calls and texts? Is that right? Do you still get a general notification is someone calls or texts you?
You do not get notifications.
Page 184 of the manual:
"Airplane Mode
Airplane mode disables the wireless features of iPhone to reduce potential
interference with aircraft operation and other electrical equipment"
http://manuals.info.apple.com/enUS/iPhone_iOS4_UserGuide.pdf
one mutes it and turn vibrate off, right? How do you set your phone to vibrate only when you receive a call or text?
http://manuals.info.apple.com/enUS/iPhone_iOS4_UserGuide.pdf
Is there a way to do a complete phone backup so I wouldn't lose any data if I lost my phone and then purchased a new one?
http://manuals.info.apple.com/enUS/iPhone_iOS4_UserGuide.pdf
http://support.apple.com/kb/HT1414
How to I transfer the iTunes music I've purchased on my iPhone into the music library on iTunes on my computer?
File>Transfer Purchases
Thanks in advance!
A look at the manual should answer most questions.

Pm8pm-v (ms-7222) general overclock questions

Similar Messages

Maybe you are looking for