PMS: Creation of new tabs for reference elements of ENHANCE BADis

Dear Experts,
I am on a PMS EHP5 implementation (for all practical purposes, it's an EHP4 implementation as we are not using the pre-defined template) and have the below problem.
I have the ENHANCE_FIX and ENHANCE_FREE BADIs included at the VA level (as the requirement is to create immediate child objects for the template through these BADIs). I have a reference element (VB) defined for these BADIs.
Example template (L1 = Level 1, L2 = Level 2, L3 = Level 3):
L1 - VA
---- L2 - VB1
--------- L3 VC1
--------- L3 VC2
---- L2 - VB2
---- L2 - VB3
In the above example template, the ENHANCE* BADIs will add VBs (example: VB4 and VB5) at the L2 level (appearing in the document below VB2 and VB3).
The requirement is to have separate tabs for each VB at the L2 level (so I will have one tab for VA and 5 tabs for VB from the above example).
I am unable to specify creation of new tabs for the reference element VB when I carry out my tabs and process configuration.
I have not been able to find any information on this aspect either. Would appreciate any help that can come my way.
Thanks.

Thanks Maurice.
I still feel that the product should leave that option to the designer of the solution. There are a lot of solutions which can get chaotic. If designed appropriately, I guess this chaos can be controlled.
At the very least, I am sure that I have not left anything out in configuration. I will raise this with SAP over a CSS.
Thank you for your input.

Similar Messages

  • How to add a new tab for the project?

    Dear All Experts,
        Could you tell me how to add a new tab for the project?
        Pls refer to the screenshot as below:
    Thanks!
    Xinling Zhang

    Hi,
        The new tab in cj20n , and the new tab can only be displayed in the highed level.Pls refer to below
        And in cj02, there is no this tab also in the wbs detailed screen,
    Thanks!
    Xinling

  • How to prevent JaxB creation of 2 Interfaces for each Element?

    hi,
    does any body know how to prevent JaxB creation of 2 Interfaces for each Element (The Content Interface and the element interface)?
    I want to configure JaxB to use only one Interface and only one implementation Class.
    Thank's,

    I am sorry I can not answer your question, I have got the same problem. Could you please email me to
    [email protected] when you know the answer, please.
    I have a question for you. When and complex type is validated, I get the object which contains the error. ( or objects ).
    However. How do know the position in the actual parent object. basically. Is there a way to know exactly the position of that attribute in that object. I need to store errors strings.
    The first problem derives from this one:
    It is not possible to execute validate function for a primitive attribute inside an structure.
    I would appreciate your help.
    Thanks.
    Gustavo.

  • New Tab in WBS Elements & need to pull fields from Std SAP Tab to the New

    Hi All,
    I would like to create a new TAB in WBS Element & I need to pull fields from Basic data tab,Origanization Tab,Control Tab & user Fields Tab  to the New Tab.
    Basically my clients wants to see all the fields (based on the requirement) in one TAB.So user will directly  go to the Custom Tab & enter the input data & save.
    So Kindly guide me how to proced.I tried WBS Layouts ,but am confused.
    Any ABAP work is required?or can we do it in PS Configuration itself?
    Thanks
    Suresh

    Configuration:
    Project System>Structures>Operative Structures>Work Breakdown Structure (WBS)>User Interface Settings>Layout of WBS Element Detail Screens>Define Layout of WBS Element
    Detail Screens
    Do do something as below:
    Project Profile:000CAP1
    Act Cat:*     
    Tab Page ID: TAB01     
    Tab page Title:Basic Data
    ICON_HEADER
    Details Screen 1: 2 (WBS Element Basic Data)
    Details Screen 1: 5 (WBS elements, organization)
    Details Screen 1: 8 (WBS Element: User Fields)
    Regards
    Sreenivas

  • I downloaded the new upgrade for Premier Elements 13 the other day, and now my program will hardly operate and will not do basic functions.  What can I do?

    I downloaded the new upgrade for Premier Elements 13 the other day, and every since then my program will hardly operate and cannot do most functions.  What can I do?

    Bill
    I went to the Premiere Elements 13 tryout page at the Adobe web site and downloaded the tryout. I used the Firefox browser (latest version).
    These are the details according to what was presented to me today
    1. In choice of download, I selected Multiple LanguagesIWindows 64 bitI 1.67 GB. I do not have a Windows 7 or 8 32 bit computer.
    In your case, you would expect that you used used Multiple LanguagesIWindows 1.50 GB (which would have been the 32 bit version
    in agreement with your Windows 7 or 8 32 bit computer.
    2. When I pressed the Download button, there appeared
    Akamai Download Manager
    Browse For Folder dialog - (where I designated Desktop as my save location for the saved file/folders from the download)
    3. The first file to download was the .7z which is named Premiereelements 13_LS26_win64.7z (in my case, in yours it should be ...._win32.7x)
    File 1 of 2.
    The second file to download was the .exe which is named PremiereElements 13_LS26_win64.exe (in my case, in yours it should be..._win32.exe)
    4. When "3" is finished, automatically the Install Now comes up with a dialog regarding the .exe with an Open button. Click on the Open button.
    5. Next there is a Folder Location dialog which I had set
    C:\Uses\Owner\Desktop\Adobe Premiere Elements 13
    I clicked next in this Folder Location dialog.
    6. Next there was an Adobe Premiee Elements 13 dialog "Preparing Files" with mention of "Extracting Files".
    When the extraction process was complete, there was the automatic appearance of the Files Are Ready with a check mark next to
    "Launch Adobe Premiere Elements 13. There I clicked the Finished button.
    7. Next up was the Adobe Installer dialog and the "Initializing Installer" message.
    8. Next came the Welcome dialog with choices of Install or Try. I selected Try.
    If you have a purchased serial number already, I assume that you can click install and use your purchased serial number.
    9. Next came the sign In Required dialog where I click the Sign In button.
    10. Next the Adobe Software License Agreement to which I clicked Accept.
    11. Next the Options dialog -
    Adobe Premiere Elements 13 4.1 GB
    Language English (North America)
    Location C:\Program Files\Adobe
    to all of 11 I clicked Install.
    and said Yes to User Account Control pop up.
    12. Automatic Install from there on.
    When I looked at my desktop I found saved there
    a. the .exe file
    b. the .7x file
    c. an Adobe Premiere Elements 13 Folder
    any of which I believe I could have installed from as I have described to you previously.
    If you cannot get the above to work, then you can try going through the process of getting the Adobe Premiere Elements 13 tryout
    from
    Adobe Photoshop Elements 13 Direct Download Links, Premiere too | ProDesignTools
    There you will end up with the .exe and .7z downloads. After you download and save these two to your desktop, then you begin the
    process by double clicking the exe and following the on screen instructions.
    Please review the above and determine how much of it you have been through before and the choices that you have made along the way.
    ATR

  • Why does this video keep opening in new tab for no apparent reason

    This annoying MacDonalds promotional video keeps opening in a new tab for no apparent reason:
    https://www.youtube.com/watch?v=aOUdR9vly6s
    I don't do anything. I'm just reading a web page and a new tab will open with this video playing. Any idea what is going on here?

    When does the window open? What were you doing at the time?
    What are your HomePage, and Newtab pages?

  • One specific webites's zoom is too big how can I decrease the zoom. (the font is normal) If I open new tab for new site that's normal. Im using a laptop. THANKS

    One specific webites's zoom is too big how can I decrease the zoom. (the font is normal) If I open new tab for new site that's normal. Im using a laptop. THANKS

    Reset the page zoom on pages that cause problems: <b>View > Zoom > Reset</b> (Ctrl+0 (zero); Cmd+0 on Mac)
    * http://kb.mozillazine.org/Zoom_text_of_web_pages

  • Creation of new tab

    Hi Guy's,
    creation of new infotype we are using Transation code:PM01, when we enter this TS it displays differnt tabs like : Create infotype,infotype version, Screen structure..   presnt require ment is to enhance the one tab to that TS.(Ex: create the one custom infotype like Employee Details, when ever we press the Eployeedetails tab it displays the related field list). Pease  help me how to proceed this senario.
    Thanks and Regrads,
    Sai.
    Edited by: sai shanhu on Apr 7, 2008 8:44 AM

    Sai shanhu, 
    Creating Infotypes for PA and PD using PM01.
    1. Infotypes should be started between 9000 – 9999
    2. Go to transaction code PM01.->select Create infotype
    3. Give the Infotype number on the screen 9010
    4. Click on the Button Generate Objects right to the Infotype input field.
    5. It asks for the Creation of the PS9010 structure for infotype. Create, save and activate and come back remaining things will be created automatically. Remaining things means Module pool program, User interface, BADI.
    6. Maintain infotype characteristics ex: Time constraints, Subtype, assigning single screen & list screen and save.
    7. Select Screen radio button and give 2000 on input field and press edit button .It takes you to the SE51 screen painter. Here we have to write logic for the validations for the fields on the Infotype screen.
    Creating subtypes for the infotype
    1. Create subtype field in the PS structure of the infotype table.
    2. Go to PM01 and press on technical attributes button and select infotype for which subtype should be maintained and display in change mode and enter Subtype field, T591A (Subtype table), T591T (Subtype text table), T591A (Time constraint table) tables and save and exit.
    3. Go to SM30 and enter V_T591A and press maintain. Enter subtype numbers and its text and save.
    I hope that it helps u .
    Regards,
    Venkat.O

  • In firefox 3, when I middle clicked a link, it would open in a new tab for me to view later, but it wouldn't go directly to the tab; in firefox 4, it does. How do I get it to work like before?

    E.g. if I was on google and middle clicked a search result, I would still be looking at google, but the page I opened would be loaded to the right side.

    Google search and other websites have a user preference that can be set to open a search result in a new tab or a new window, for users who are logged in to their website.
    Otherwise, when you don't have a 3-button mouse or a scroll pad with "middle-click" functionality, you can use '''{Ctrl + Click}''' to open a hyperlink in a new Tab.

  • New Tabs for Firefox will not open unless clicking on a link while browsing.

    To expand on what the question is, Every time I try to open a new tab, it just doesn't work. New tabs only open when I click a link that also opens the page in that link in a new tab. Even when I try to do the same thing through the file menu and Ctrl+T. Otherwise, Firefox is running normally. Yesterday, I downloaded a program called "FLV player" that I knew came with an ask.com toolbar but for some reason, switched ask.com to the homepage for Firefox. After that, I switched the homepage for Firefox back to its default page.

    '''''Ask Toolbar''''' can cause that problem. Uninstall it.
    *http://support.mozilla.com/en-US/kb/Uninstalling+add-ons
    *http://support.mozilla.com/en-US/kb/Cannot%20uninstall%20an%20add-on
    '''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''
    Not related to your question, but...
    You have some old Java Console '''''extensions''''' that Java did not clean up when updating. The old versions that you have are: 6.0.22, 6.0.23, 6.0.24<br />
    You can remove them by following these instructions: http://kb.mozillazine.org/Java#Multiple_Java_Console_extensions

  • Help on creation of New Tab in Trip And Expense- My Trip And Expenses

    Hi,
    My requirement is to create a new tab in the existing Tab strip in "Trip And Expense->My Trip And Expenses".
    At present I have a seperate WD Java Application for "My Aproval Status" now the requirement is to add a 4th tab and that tab has this WD java application to it.Can this be possible if yes how ? and if no then Why?.
    Thanks
    Pooja

    hi,
    yes this is possible ........
    you just have to add a tab to the already made tab you have created ......now to the newly added tab just have an view ui container .......now in the windows of the code you can embed that already made program to the viw ui container.......
    hence whenever you will execute the code of tabstipr and select this new tab your code  "My Aproval Status" will be called automatically......do remebre to declare the usage of the WD Java Application for "My Aproval Status"  in the property just in the same  manner we do when we declare the usage of alv in our code......
    in case of any problem further...inform
    thanks,
    sahai.s

  • Reg creation of  new Tcode for d existing Tcode

    Hi ,
    i need to create new Tcode for d existing Tcode. For Ex. for abap editor Tcode is SE38.for dis i want to create a new Tcode like Z_se38.how can i do it.Plz explain me clearly.very urgent
    Thanks in Advance

    hi,
    how to create a a T-code of that
    Go to se93.
    Then create the new T.code.
    Under that select parameter Transaction.
    Then give the sm38 in the t.code in default values tab.
    check the checkbox skip initial screen.
    in classification tab.
    click checkbox inherit gui attributes..
    Rgds
    Anversha

  • New tab for Contract for data about products and product sales.

    Looking for ideas to implement a new tab on the Contract (RECN)
    We have some basic data about products and product sales that we want to have implemented on a screen tab for a contract.  The user needs to be able to enter information about a product, quantity, year grown, and tax info. And then each of these products may have one or many sales records showing date of sale, quantity sold, and a brief note.
    So a contract can have 1 or many products and a product can have one or many sales records.
    The user needs to be able to enter, update and delete any one of these records.  And, ideally, enter multiple of each before saving.
    Do any of you have ideas about how to go about this?  Using ALV grids? or table controls? I'm still wet behind the ears regarding doing screen development in SAP so am open to any and all suggestiions.
    SAP 6.4 is the version we are at.
    Thanks
    Laurie

    Maybe the original order to renew and keep unlimited data was cancelled because it was not an option. It wasn't a "bait-and-switch" The order was cancelled, it wasn't switched. When you called to reissue the order they told you the correct options so they did not switch you without your knowledge. The second rep was correct, he didn't lie, the first rep did. Verizon cancelled the order because if they didn't you would have been set up w/ new 2 year agreements on a tiered data plan, which would have been illegal. Thats why they cancelled it. So you can either not make the change, keep the unlimited data and buy the phones outright. Or switch, go to a tiered plan, and get new phones. By glitch they meant the system accidentally allowed you to keep the unlimited plan, though it was not an option. Verizon has had this rule since they removed the unlimited plan back in '11.
    << Full name of rep removed >>
    Message was edited by: Verizon Moderator

  • How do I get the tabs to start working after updating Firefox? It wont open new tabs for me now.

    I downloaded the recent update for Firefox and now the new tabs will not work, either by clicking on the "+" symbol or by going to file create a new tab. Ive tried rebooting firefox and have had no luck. Any one else having this issue and know how to fix it?

    If it works in Safe Mode and in normal mode with all extensions (Firefox/Tools > Add-ons > Extensions) disabled then try to find which extension is causing it by enabling one extension at a time until the problem reappears.
    Close and restart Firefox after each change via "Firefox > Exit" (Windows: Firefox/File > Exit; Mac: Firefox > Quit Firefox; Linux: Firefox/File > Quit)
    See also:
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
    You can find the installation path of all plugins on the <b>about:plugins</b> page.
    *http://kb.mozillazine.org/Issues_related_to_plugins#Identifying_installed_plugins

  • Navigation bar opens new tabs for links on the same site - only newer versions of FireFox does this! Why?

    I've used this custom navigation bar for nearly a decade. New versions of FireFox open new tabs when I navigate to different pages on my weather site. Very annoying!!! I've tried turning off tabs, but then it opens NEW WINDOWS! These links ARE NOT ENCODED TO OPEN IN NEW WINDOWS! What is causing this? Looks like I"m going to have to switch to Chrome or go back to IE, since nobody at Mozilla seems to care about this. They seem to think it is a good feature and not a bug. What gave you the right to decide to open new tabs at random times? If I click a link on a site that is on the same site I'm already on, and the link isn't coded for _blank, then it should open in the same window!

    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.com/kb/Safe+Mode

Maybe you are looking for