Png's are not shown in finder but in preview

In the system log I find:
mac Finder[216]: [QL] Display bundle <QLNSImageDisplayBundle: 0x1169bd070> did not return a layer although it was required to because it did not return a view either.
That may cause the problem to appear.
Does anyone have an idea?

Venkat,
  You need to run 1) Full User Sync, 2) Full Role Sync, 3) Full Profile sync if you are using profiles, 4) Full Risk Analysis and 5) Management Reports to see SoD violations.
I did not understand meaning of this statmenet:
"SOD's are shown for the different system's the user has same Roles in the two systems."
What do you mean by this?
Regards,
Alpesh

Similar Messages

  • SD card not shown in Finder, but shown in iPhoto

    Hej all,
    I have a problem with my SD card. It was shown by Finder on my iMac and it was shown in iPhoto too. Since a while no SD card is shown in Finder, but each SD card is still recognised in the Finder. I have a guess: I think, that I unconciously moved the SD card from the Finder to the s Desktop. Since then it's not in the Finder anymore, but also not on the Desktop.How can I get the card back also into the finder?
    Hope someone can help me.
    Markus

    See if pressing the Eject key ejects the disk. If it works, restart your Mac then re insert the disk.

  • The episodes I uploaded last weeks are not shown in Itunes but only in the podcast app for iPhone.

    In june I started the podcast and it was apprroved by Itunes.
    It took a long time for the first 2 episodes to be uploaded.
    But they are now finally in.
    So in the last two weeks I uploaded episoded 2 till 6.
    But they are shown in Itunes, although they are shown and can be downloaded in the podcast app for Iphone.
    What is going wrong?
    http://nvbvlf.posterous.com/rss.xml
    http://feeds.feedburner.com/ClubbersDiaryPodcast

    Dear Roger,
    Another problem is popping up.
    After I followed your advise the episodes immediately showed up in Itunes.
    But this week we added a new episode which has taken 30 hours to come online.
    After waking up this morning, not only the last added episode but also the 4th and 1st dissapreared.
    Could you please have a look again at the posterous and feedburner pages.
    There are the same as in my first post:
    http://nvbvlf.posterous.com/rss.xml
    http://feeds.feedburner.com/ClubbersDiaryPodcast
    Thanks in advance

  • In my Apple Macbook Air, most of the USB Flash/Thumb Drives are not shown in the Finder Window. Only a few Brands of USB /Flash Thumb Drives are shown or compatible or shown in the Finder. How do I use any Flash/Thumb Drive with my Apple MacAir?

    In my Apple Macbook Air, most of the USB Flash/Thumb Drives are not shown in the Finder Window. Only a few Brands of USB /Flash Thumb Drives are shown or compatible or shown in the Finder. How do I use any Flash/Thumb Drive with my Apple MacAir?

    Yes, junker thumb drives pour like rain in the market.  
    Which makes are working on your Air, and which arent?
    Stick to Sandisk and a couple of other reliable mfg. of memory sticks

  • How can I find our photos on our iPad they are not in photo stream but have been sent from the iPhone over icloud, how can I find our photos on our iPad they are not in photo stream but have been sent from the iPhone over icloud

    how can I find our photos on our iPad they are not in photo stream but have been sent from our iPhone over icloud

    Hi...
    Tap the Photos icon in the Dock at the bottom of of the screen.
    If you don't see the photos there, tap Settings > iCloud
    Turn Photo Stream off then back on then restart your iPad.
    Hold the power button until "slide to power off" appears.  Slide to power off.  After it is off, press the power button to turn it back on

  • HT201070 Since my last update RAW - Files from Nikon D800 are not shown correctly in the Finder as small prewiev. Can anybody help ?

    Since my last update  to 10.8.4 RAW - Files from Nikon D800 are not shown correctly in the Finder as small prewiev. Can anybody help ?

    update 10.8.5 solved this problem. Thankyou anyway.

  • Placed PNG images which are made in 3ds max are not shown correctly in Ilustrator

    Hello,
    Why placed PNG images (renders) which are made in 3ds max (and then photoshoped) are not shown correctly in Ilustrator. Images appear very noise so you can't see almost a thing. the same pictures (renders) made in Revit appear ok.
    Is there a solution to solve this issue?
    Thanks.

    You would have to provide screenshots of how it looks in PS, including the channels visible. MAX may have embedded extra channels that throw off AI. And of course check whether your PNG is actually 8bit, not 16bit.
    Mylenium

  • Workflows are not shown in the OAM aplications front end but exists in LDAP

    Hi
    In my OAM application, Workflows are not shown in the front end but exists in LDAP. Any idea how the workflows are displayed on the front end.
    due to this not there in production, when i tried to create a user, it says i donot have access rights.
    When i try to create and add workflows in the LDAP, the server rejects with the following error:
    Error adding object 'dn: obname=R20030715T164905882142,obpolicyContainerId=WorkflowDB, obcontainerId=Policies, o=Oblix,ou=oblixconfigentries,. The error sent by the server was 'Already exists':
    the entry is : last line shows obwfstatus as deleted ...
    dn: obwfinstanceid=7e872056d0ce012f0000BD537dc00000,obcontainerId=workflowInstances,o=Oblix,ou=oblixconfigentries, dc=axa,dc=co,dc=uk
    modifyTimestamp;adcsn-5038aa2900000001000f;vucsn-5038aa2900000001000f: 20120825103356Z
    modifiersName;adcsn-5038aa2900000001000e;vucsn-5038aa2900000001000e: uid=oblixadmin,ou=admins,dc=uk
    obwfstatus;adcsn-5038aa2900000001000d;vucsn-5038aa2900000001000d: 8
    obwfstatus;vdcsn-5038aa2900000001000d;deleted:

    Edit the targetNamespace to any name less than 60 chars and they try again
    Regards,
    Prateek

  • Downloaded iOS Dev videos but some are not shown as downloaded in iTunes U collection

    This is a 2 day old Mac Mini so maybe something is not set correctly.
    I chose to download the iTunes U collection of iOS Development videos.
    12 videos downloaded OK and I have been watching, the others downloaded but are not shown as downloaded (the 'Get' is still shown).
    An example is the Effective iPhone App Development - Part 1
    I have downloaded this now 3 times and logged out and back in, closed all applications and opened them again with no effect.
    There was a comment in one Apple forum that suggested video restrictions may be preventing some downloaded videos from being displayed.
    As far as I can see there are no restrictions set.
    Must admit to being a bit stuck on this one.

    I had the same problem. This seems like a bug.
    I discovered a workaround for this problem:
    Open your "iTunes Media" folder (usually at /Users/YOURUSERNAME/Music/iTunes/iTunes Media).
    Inside "iTunes Media" should be a folder called "Downloads". Open it.
    Now switch over to your iTunes application and start downloading the video.
    Now switch back to the iTunes Media "Downloads" folder. A folder named "iTunes U" should appear. Open it. Now open the next folder which should be called "Effective iPhone App Development - Part 1 _ iOS Development Videos.tmp". Inside this temp folder you should see a file called "download.m4v" which we will deal with later.
    IMPORTANT. While the video is still downloading, drag and drop any file (like a random text file) from a different location into that temp folder. If you don't drag and drop a file into the temp folder, iTunes will automatically delete the "download.m4v" video file right after it finishes downloading.
    After the iTunes application is finished downloading, you can drag the "download.m4v" file out of the temp folder and onto the desktop or a different folder of your choosing. This file can now be viewed with Quicktime or any other video player.
    Hope this helps!

  • Was able to bluetooth one time to play scrabble on our two iPad 1's, but have not been able to do so again.  Both are searchable, but are not able to find each other.  Any help will be appreciated.  Thanks.

    Was able to bluetooth one time to play scrabble on our two iPad 1's, but have not been able to do so again.  Both are searchable, but are not able to find each other.  Any help will be appreciated.  Thanks.

    Both need to be in the lobby, and searchable at the same time.  Also, if either has been paired with a keyboard or headphone since you played, go into settings, and make sure those devices are unpaired, and not interfering with the process.

  • COMBO BOXES AND SOME PAGES ARE NOT SHOWN CORRECTLY IN SOME WEBSITES LIKE SBICAPSEC AND MAXNEWYORK LIFE. BUT NO PROBLEM USING WITH IEXPLORER

    I am not able to login to maxnewyork life insurance site while using firefox. I am using firefox 3.6.10 now. Combo boxes are not shown in the some trading websites. I uses noscript2.0.3.3, javaconsol6.0.21, javascript option 1.2.6 and WOT20100908. It creates feeling of inferiority in using Firefox due to these problems.

    * "Clear the Cache": Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
    * "Remove the Cookies" from sites that cause problems: Tools > Options > Privacy > Cookies: "Show Cookies"
    Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
    See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]

  • Approved and published items are not shown in the catalog search

    Hello all,
    We are implementing SRM 4.0 SSP scenario .
    To support shopping of EBP we are also implementing CCM 2.0 as an add on.
    Please note CCM and EBP are on same client and CAT & CSE are also on the same client.
    No XI is involved. The catalog scheme was uploaded as CSV 2.0. The items for the catalog was created manually in CAT.
    Although the item has the status "approved" and the procurement catalog which is also the master catalog was published successfully the item is not shown after searching by CSE in EBP. Also the categories of the scheme are not shown in the catalog search.
    Do i have to approve the categories too and if yes can you  explain me how to do this?
    I think you see that I'm a newbie at srm and ccm and this problem is probably no real problem but I have not found any similar topics in the forum. So please can you help.
    Thanks a lot for your help.
    Best regards,
    Bernd

    Bernd: the reason I asked about views is that you don't have any error messages. This might indicate that (a) you have no items in the view, or (b) there's something wrong with view-role-user assignment.
    To check for (a), please go to the published procurement catalog, and go to Views tab. Check that your View is Active. Click on your View ID link to display view details. You should see a list of characteristics assigned to your view in Assign Characteristics sub-tab (the list should not be blank!). Go to Assign Items sub-tab. Navigate in your schema to find items that are supposed to be assigned to your view. You should see "Yes" in the "Assigned" column for those products. If you don't, then you simply don't have any items in your view.
    Another thing I'd like you to check: when the user calls your procurement catalog for search, do you see the name of the catalog displayed just below the drop-down "Select Categories Hierarchically"?
    Cheers,
    Serguei

  • Sometimes, some images are not shown...

    Hi!
    Out applet shows (or loads?) all images correctly, but sometimes, one or more images are not shown (or loaded?). What can it be?

    I am having a similar problem so maybe someone can help me too.
    I find that my images load correctly most of the time, but once in a while (say 1 in 4 attempts), some of them dont load. The reliability of this is much better now that I have moved the images out of the jar, but its still not right
    I also find that sometimes the classes do not load. I get classdef.not.found for a file that really should be there. I can see that the jar containing it has been downloaded to the temp dir. I have been clearing my cache out manually for now between every attempt.
    I am not sure what code to show. I dont think its necessarily a problem with images since classes dont always load either, but here is the code for loading images anyway.
            MediaTracker tracker = new MediaTracker(applet);
            for (int i = 0; i < img.length; i++) {
              img[i] = applet.getImage(urlCodeBase, imagePath + images);
    tracker.addImage(img[i], i);
    tracker.waitForID(i);
    if (tracker.isErrorAny()) {
    System.err.println("Error loading image " + images[i]);
    My web content is being delivered by 3rd party hardware which might be rather slow - its hard to tell. My entire web content is approx 200KB. Results are the same using IE or Mozilla.
    Any ideas would be a great help!

  • Permissions are not shown correctly in Get Info on Snow Leopard client, using Tiger server w/ ACL's

    Invoking "Get Info" on a file or folder which is on a shared volume hosted by a G5 running Server 10.4 fails to show meaningful permissions when done from a 10.6 iMac.  It says only that the user has "custom permissions", which is true since there are ACL's in operation.  However, the Owner and Group POSIX settings are not shown, only the Everyone setting shows, making it impossible to determine which user created the file (in order to resolve issues when permissions prevent intended action).  The same file or folder will show Owner and Group on 10.5 systems, as well as at the 10.4 Server itself, so we do have a workaround.  I have noticed, though, that I have run into permissions restrictions where I should not, such as creating a folder on a shared volume using a 10.6 system, and then not being able to save into that folder from the same system/user.
    Is there something about the implementation of ACL's in Tiger that confounds Snow Leopard's Finder?

    Hi,
    I did two things to get it working, and haven't taken the time to sort out which did it.  But it is working so it's good enough for me.
    First I followed TeenTitan's suggestion, and also checked "Allow printing from the internet".  I'm behind a firewall so not too concerned I'll get someone's odd photo on the printer.
    Second I went back to server admin, selected the queue under queues in the Print service, then selected IPP and deselected LPR.  Bonjour went grey but stayed checked.
    After this I see the printer with "@ server name" appended, and it added the printer drivers like it should.
    So all working well.

  • Album art not shown in finder

    Embedded album art in audio files is not shown in finder since I upgraded to ML (worked fine in SL).
    Other peaple report a solution of the problem with elimination of Voice Memos. But in my case this is not evident because I do not have Voice Memos.
    Does somebody know the solution of the problem?

    After hours struggling with this issue I finally found a solution (my setup is iTunes 10.7, OSX 10.8.3):
    (But my workaround is only for people who know how to handle iTunes libraries!!! And backup first!!)
    Open a new user account on your mac.
    Generate a new iTunes library called 'itunes', no other name!
    Import some files with embedded album art.
    Drag such a file back to desktop and you should see the icon of album art.
    Everything is like it should be.
    Now copy this new itunes library to your user account of origin.
    But first rename your old iTunes library different from 'itunes' e.g. 'itunesorigin'
    Open the new iTunes and drag one file to desktop, now miraculosly all audiofiles in all of your itunes libraries should show up album art IN FINDER including preview and quicklook.
    But this state is not stable. As soon as you open the old 'itunesorigin' the problem starts up again.
    So, the next steps are:
    Open the new iTunes and in preferences select the media folder of 'itunesorigin'. OK, say no to 'collate data'. Close iTunes.
    Now copy and replace from 'itunesorigin' to the new iTunes the following files:
    iTunes Library Extras.itdb
    iTunes Library Genius.itdb
    iTunes Library.itl
    iTunes Library.xml
    Open the new iTunes and it should look like the old 'iTunesorigin' with all your playlists etc..
    Close again.
    Move the media folder from 'iTunesorigin to the new iTunes folder (replace).
    Open new iTunes and select in preferences the new location of the media folder.
    Now you should have the file iTunes Music Library.xml instead of iTunes Library.xml.
    (iTunes Music Library.xml is the default if you have multiple libraries)
    Done! For me its stable and I am happy. Your iTunes folder should look like this picture:

Maybe you are looking for