PNP Selection

Hi Guys/Dolls
I have a ABAP program that uses a PNP Logical database.
When the application is launched the <b>"Other period"</b> is automatically selected I want <b>"Today"</b> to be the default.
Any ideas how I can do this programmatically?
Many thanks in advance.
Raj

Hi,
Though it appears as Other period if you wants to use the ToDays date as default in program
in the start of selection
write
if pnptimr6 = 'X'.   (check whether that button for other period is correct or not)
     pnpbegda = sy-datum.
    pnpendda = sy-datum.
endif.
reward points if useful
regards,
Anji

Similar Messages

Standard PNP selection screen problem in reason for action type

Hi all,
We have used standard PNP in one of our report program.
The input for 'Reason for Action' (excluding a particular reason for action ) has no effect on the actual selection of data from the PNP. i.e. even if a particular reason for action is excluded in the selection, record pertaining to that action for reason is still picked in the PNP selection and passed on to the program through Get PERNR statement.
The above problem seems to affect all the standard and custom HR Reports as well.
Please advise on how exactly the excluding of a particular reason for action work in selection through PNP and is there anyway to solve the problem.
eagerly waiting for your response.
Thanking You,
Regards.
Deepak

Thanks for your response,
We tried but it did not work.
Our code is as follows,
INITIALIZATION.
W_REPID = SY-REPID.
PERFORM CREATE_RANGES.
START-OF-SELECTION.
GET PERNR.
RP-PROVIDE-FROM-LAST P0000 SPACE PN-BEGDA PN-ENDDA.
PERFORM GET_DATA.
END-OF-SELECTION
If you could give us your email id, we would email the screen shots of the selection screen and the output.
my email id - [email protected]
Thanking You,
Regards
Deepak

PNP Selection Cursor

Hi Guys/Dolls
I have an ABAP program that uses a PNP Logical database.
When the application is launched the "Other period" is automatically selected I have managed (with your help) to make "Today" to be the default via the use of the following statement.
pnptimed = 'D'.
2 other questions
1) The cursor doesn'tt seem to have moved still in the date of the other box how do
I make it move to the default which is now set to "Today".
2) As a matter of curiosity how would I make the current month the default or any other selections the defaults? Are there similar statements like pnptimed = D.?
Many thanks in advance.
Raj

The following 2 statement will set Today as the default on the PNP
selection and also move the cursor to that field.
pnptimed = 'D'.
SET CURSOR FIELD 'PNPTIMR1'.

Dear freinds how to open the fields in the PNP selection screen

Dear Freinds,
         When you use the PNP selection screen , i dont find the Orgeh field in default selection screen .
However , using the code at selection screen output i have closed certain feilds using the loop at screen,
but when iam trying in similar way to show the field
on the selection what is the code i have to use
in the loop at screen...........especially for the field
orgeh .
i have tried the othere options like required.........this working when iam able to make the date fields mandatory, similary i want to try with the below
code to get the field Orgeh on the selection as default feild when we execute the report.
can any one please modify me the code
LOOP AT SCREEN.
    IF screen-group4 = '026'   .
      screen-active = 0.
      screen-invisible = 1.
       screen-input = 0.
    ENDIF.
    modify screen.
endloop.
what i have to use in the loop at screen for me to get the orgeh field on the selection screen.
thanks & regards
madhuri

Hi Madhuri,
Unless you dont declare the orgeh field in hr report category you cannot show it on the selection screen nor you can hide it.
If you do not want to use hr report cateogry.
What you can do is that declare a parameter or selection screen called p_orgeh type orgeh.
Here you can do the hiding on conditions.
Kindly note here that after get pernr you will have to put a check that
check p0001-orgeh in p_orgeh.
Because for the fields declared by you automatic filtering does not happen.
Regards,
Divya
Pts valuable.

Not able to hide all fields on PNP selection screen.

Dear Freinds,
           i wanted to hide all the field which are given on PNP selection screen, with the help of the
report category i have hided all the field including the Person selection period as i require only the
Data selection period. further through coding as below iam able to remove all the radio buttons
Today, Current month,Current year, from today, upto today,Other Period . But i am getting spaces above period (PNPBEGDA and PNPENDA) . i.e in the frame Period i have spaces being left due to
the radio buttons being Hidden . Could any one let me know how to remove the spaces so that
Period range will set exactly in the frame.
LOOP AT SCREEN.
    IF screen-name = 'PNPTIMR4' .
      screen-input = '0'.
      screen-invisible = '1'.
    ENDIF.
    IF screen-name = 'PNPTIMR2 .
      screen-input = '0'.
      screen-invisible = '1'.
    ENDIF
    IF screen-group4 = '090' .
      screen-input = '0'.
      screen-invisible = '1'.
    ENDIF.
    IF screen-name = 'PNPTIMR1' .
      screen-input = '0'.
      screen-invisible = '1'.
    ENDIF.
    IF screen-group4 = '092' .
      screen-input = '0'.
      screen-invisible = '1'.
    ENDIF.
    IF screen-group4 = '094' .
      screen-input = '0'.
      screen-invisible = '1'.
    ENDIF.
    IF screen-group4 = '100' .
      screen-input = '0'.
      screen-invisible = '1'.
    ENDIF.
    MODIFY SCREEN.
ENDLOOP
Please could any one let me know how can i push up the Period date (PNPBEGDA and PNPENDDA)
so that i will not have any blank space left out in the frame(Period) .
Thanks & Regards
Divya.
Edited by: Divya Kumari on Jan 4, 2009 1:53 PM

hi, sorry i think i misunderstand you question,
if i can understand it right now? the following code can help you i am using "PNP" Screen no '900'.
tables:pc207, hrp1000,pernr, pyorgscreen.
infotypes: 0001.          "Organizational Assignments
nodes: payroll type pay99_result.
at selection-screen output.
loop at screen.
    if ( screen-group1 = 'RES' or screen-group1 = 'YB1' or
         screen-group1 = 'YB2' or screen-group1 = 'YB3' ).
      screen-active = '0'.
      screen-invisible = '1'.
      modify screen.
    endif.
endloop.
try the following too,
TABLES:pc207, hrp1000,pernr, pyorgscreen.
INFOTYPES: 0001.          "Organizational Assignments
NODES: payroll TYPE pay99_result.
AT SELECTION-SCREEN OUTPUT.
BREAK-POINT.
LOOP AT SCREEN.
    IF (
*       screen-name = '%BYB1005_BLOCK_1000'
       screen-name = '%FYTI007_1000'
     or screen-name = '%FBIS010_1000'
     or screen-name = 'PYVW0_0'
     or screen-name = '%_PYPERNR_%_APP_%-TEXT'
     or screen-name = 'PYPERNR-LOW'
     or screen-name = '%_PYPERNR_%_APP_%-VALU_PUSH'
      screen-active = '0'.
      screen-invisible = '1'.
      MODIFY SCREEN.
    ENDIF.
ENDLOOP.
Replay if any problem,
Kind Regards,
Faisal
Edited by: Faisal Altaf on Jan 4, 2009 6:55 PM

How to populate f4 values to standard pnp selection screen fields

Hi Experts,
my question is how to populate f4 values to standard pnp selection screen field. i am using LDB PNP for a report , it displays several fields with f4 values, i need to remove all the stadard f4 values and want to place my f4 values in the selection screen

Hi Venkat,
To put ur own values in the F4 help of any field...all u have to do is.
1st fetch all the records that u need to display in F4 help list...in one internal table.
and then use the function module 'F4IF_INT_TABLE_VALUE_REQUEST'
call function 'F4IF_INT_TABLE_VALUE_REQUEST'
exporting
retfield =
value_org =
tables
value_tab =
return_tab =
exceptions
parameter_error = 1
no_values_found = 2
others = 3.
where retfield is the field for which u need to give the F4 help.
and valu_tab is the internal table in which u have the list of records to be displayed.
this would do the work...
I dont have the system in front of me...as soon as i have...will try to send a piece of code, to make ur work easy.
Till then hope this helps u...all the best
Regards,
Radhika

Initialization for Date Fields on PNP Selection screen

Hi All,
I need to initialize the date on the LDB PNP selection screen to today.
I gave the following code in the Initialization
Set the Key Date to Today
pnptimr1 = 'X'.
but this doesn't get reflected on the selection screen.
Please suggest.
Thanks,
Suryakiran D.

Hi Suryakiran,
1. Only as Default.
2. Use this.
DATA : firstover TYPE c.
AT SELECTION-SCREEN OUTPUT.
IF firstover = ''.
    firstover ='X'.
    pnptimr6 = ''.
    pnptimr1 = 'X'.
ENDIF.
regards,
amit m.

Can we modify the pnp selection screen and get only month and year?

Dear Freinds,
              I have requirement where i have to modify the PNP selection screen. So with the help of report category and coding in AT SELECTION-SCREEN OUTPUT , i have modified all the fields relating to dates . i.e i have removed all the radio buttons (i.e Today, Current month,current year etc) and finally
i have landed with only Period ( PNPBEGDA & PNPENDDA range) . But i dont want the PNPBEGDA & PNPENDDA range , but i want only is the month and year ( i.e just like the PNPPABRP & PNPPABRJ)
on my selection screen along with the pernr .
i have used the below code to close all the fields except pnpbegda and pnpendda.
AT Selection-Screen output.
loop at screen.
IF screen-group4 = '098' .
      screen-input = '0'.
      screen-invisible = '1'.
    ENDIF.
    IF screen-group4 = '092' .
      screen-input = '0'.
      screen-invisible = '1'.
    ENDIF.
    IF screen-group4 = '094' .
      screen-input = '0'.
      screen-invisible = '1'.
    ENDIF.
    IF screen-group4 = '100' .
      screen-input = '0'.
      screen-invisible = '1'.
    ENDIF.
    IF screen-group4 = '104' .
      screen-input = '0'.
      screen-invisible = '1'.
    ENDIF.
    MODIFY SCREEN.
endloop.
i.e on my selection screen i want only month & year combination and pernr -
when iam using the logical database PNP . Could any one please let me know how can i get only mon & year only on my selection screen .
If it is possible please let me know .
Thanks & regards
divya.

Hi ,
   The requirement is that the user doesnt want to enter the date range i.e for ex: 01012008 to 31012008.
As per the requirement the user will enter only the month and year only . so i on the selection screen
i want only the month and year only . Is there any means i can modify the date period which is there by
default (PNPbegda and PNPendda) on PNP selection screen. Instead of we givign to the user the
PNPBEGDA and PNPPENDA i want is only month and year .
AS already the code has already been written and now they have asked that they want only the month and year on the selection screen.
Please suggest me in this regard.If iam hiding all the buttons relating the dates fields, and now if iam adding the parameters for the month and year it is coming below below the fields pernr , personnel ara and subara , company code , payroll area, employee group of the standard fields of PNP selection screen , there by any body could please suggest me how to change.
regards
divya.

EDIT PNP Selection screen

Hello
I would like to edit my PNP selection screen (000) with screen painter. Does anyone know if this is possible?
Otherwise is it maybe possible to add tabs to the screen dynamically?
Greets

hi ,
go to the attributes of the program>hr report catagory>then you can create your own selection screen give the name and description...
regards,
venkat.

About pnp selection screen

hi experts,
i am using pnp selection screen and i want
emp no , personnel area , personnel subarea , epm group ,emp sub group in my selection screen.
how it can be possible ?
actully there is option to select the particuler field option ,but when i again excute the program it shows the std selection screen .
Thanks And Regards.
Priyank Dixit

hi,
refer to this links
Re: Change in LDP PNP Selection Screen
Re: Change in LDP PNP Selection Screen
http://brookshireconsulting.com/technical_rc.html

Pnp selection screen 000 how to put default values

Hello everybody,
my question today is about PNP selection screen 000: How can i put default values in the fields w/o using variant.
or can i restrict the numbers of values returned by " get pernr" with conditions not on selection screens.
thank you in advance!
Eric.

use this code to default fields on the event INITIALIZATION. you can modify as per you needs..
*----------------------------- INITIALISATION -------------------------------------------
INITIALIZATION.
pnpstat1-low = '0'.APPEND pnpstat1.
pnpstat2-low = '3'. APPEND pnpstat2.
pnptimed = 'I'.
* Default Dates
CONCATENATE sy-datum+0(4) '0101' INTO pnpbegda.
CONCATENATE sy-datum+0(4) '1231' INTO pnpendda.

PNP Selection Screen Modification

Hi All,
Can anyone tell how to remove the payroll period section completely from the pnp selection screen. I tried all the means going to HR Report Category, I couldnt find the perfect category to hide the payroll period selection. It neither allow me to create a new one for my program. Please help me out as soon as possible with steps/navigation whichever possible..
Thanks in advance,
Charan

you can create your own selection screen by going to Attributes -> HR Report Category -> New Report Category(button on the bottom of popup screen).
here, you can select/deselect selection criteria.
it looks like you were in the correct place - why didn't it let you create a new report category?
if helpful, please don't forget to reward points.
thanks,
robert.

Issue with PNP selection

Hi Experts,
I am developing a program which uses PNP screen 900. But in the o/p screen when I press "Further Selections", its not displaying the list popup. But its working fine with screen 000.
Kindly let me know whether I am missing anything.
Thanks & Regards
Manas

Hi Manas,
Please check the below link it will be useful
[Pnp Selection Screen|Not able to hide all fields on PNP selection screen.]
Thanks
Kalyan

HR ABAP - PNP selection screen

Hi Friends,
I am executing the standard report with PNP logical database .
But in the selection screen when I click on further selection and select the parameter company code.
Now I entered the company code "0060", but I am getting the out put for both company code 0060 and 0020,
here I need the out put only for the person which are belongs to company code 0060, but I think the selection screen company code was not controlling the out put.
Also I checked the Infotype internal table p0001, here I am able to see both the company codes, and for that person the process is continuing and I am getting the out put for the company code 0020, bcz the current/valid record for this person is 0020.
Request to let me know any issue there?
Magesh.S

Hi,
You need to set "person selection period" dates, in order to list values with selected parameters.
Daniel

How to hide PNP selection windows and set default values for PNP.

Hi expert,
I am using HR logical database PNP, but I don't want to display selection windoes for running program on PNP, whereas I want to set default value for some selection items in the program. could you please tell me how to get those two targets?
Many Thanks,

Hi
You have mentioned 2 things.
1. Don't want selection windows for running program for PNP - this can be achieved using the HR Report category - You can get more details on HR Report Category on
HR Report Category
2. I want to set default value for some selection items - This you need to achieve in initialization event of your program.
How you can get this can be explained by INITIALIZATION (SAP Library - ABAP Programming (BC-ABA))
Thanks,
Sreeram

PNP - Selection scr een

Hi Friends,
I have one doubt on selection screen of logical database PNP.
I enter the date in selection screen as 01.06.2006 to 31.12.2006 for both data selection and person selection.
In the database table date(begda) is 01.01.2000.
When i use provide * from p0001 between pn-begda and pn-endda..endprovide,
it automatically changes the date in table to selection screen date, ie from 01.01.2000 to 01.01.2006. So brings all the data even though date in table exists only up to 01.01.2000. How can i solve this?
Thanks in advance.

No, i want all the records for a person during a particular period. All actions from pa0000. Now i validated the data selection between loop-endloop. But it does not validate the person selection. Any idea Please.
Thanks

PNP Selection

Similar Messages

Maybe you are looking for