PNPCE Questions Regarding GET PERSON and GET PERAS

Any information regarding the runtime performance of PNPCE? It seems it takes a lot more time than PNP? Any suggestions how to improve performance while using PNPCE?
Message was edited by:
Shuvo Datta

Shuvo,
I found this on SE36, documentation on PNPCE logical database:
"<u>Selection Fields of the 0000 and 0001 Infotypes</u>
<i>You can use all the standard fields of the 0000 and 0001 infotypes for selection. You can also use additional selection fields that are the concatenation of two or more of these infotype fields. If possible, do not use these concatenated fields because they do not play a significant role in the selection and can lead to long runtimes in certain circumstances. You can show and hide the required selection fields using the Selection Fields function in the application toolbar. The report
category defines a preselection of fields that should be available."</i>
Also, I suggest you read the full doco in SE36 to use this LDB in a more efficient way as far as the performance is concerned.
Hope this helps.
Reward points if useful.
Cheers,
Sougata.

Similar Messages

Quick question regarding best practice and dedicating NIC's for traffic seperation.

Hi all,
I have a quick question regarding best practice and dedicating NIC's for traffic seperation for FT, NFS, ISCSI, VM traffic etc. I get that its best practice to try and separate traffic where you can and especially for things like FT however I just wondered if there was a preferred method to achieving this. What I mean is ...
- Is it OK to have everything on one switch but set each respective portgroup to having a primary and failover NIC i.e FT, ISCSI and all the others failover (this would sort of give you a backup in situations where you have limited physical NICs.
- Or should I always aim to separate things entirely with their own respective NICs and their own respective switches?
During the VCAP exam for example (not knowing in advance how many physical NIC's will be available to me) how would I know which stuff I should segregate on its own separate switch? Is there some sort of ranking order of priority /importance? FT for example I would rather not stick on its own dedicated switch if I could only afford to give it a single NICs since this to me seems like a failover risk.

I know the answer to this probably depends on however many physical NICs you have at your disposal however I wondered if there are any golden 100% rules for example FT must absolutely be on its own switch with its own NICs even at the expence of reduced resiliency should the absolute worst happen? Obviously I know its also best practice to seperate NICs by vender and hosts by chassis and switch etc

Question regarding the "mcxquery" and "dscl -mcxread" commands:

Question regarding the mcxquery and dscl -mcxread commands:
Does anyone know why the mcxquery and the dscl . -mcxread commands don't show any info about MCX managed login items & printers? The System Profiler's "Managed Client" section does. Id like to see info regarding managed printers and managed login items using the mcx tools. I have Mac users running 10.5.2 with both login items and printers that are pushed out to them via MCX. The System Profiler app shows all of their policies, but the dscl . -mcxread and mcxquery tools dont. Why not?
-D
Message was edited by: Daniel Stranathan
null

How do you "call procedures/functions" without sql code? You need at least the call statement like
{call myProc(?,?,?)}that you wrap into a CallableStatement.
Other than that: when you switch off autocommit, you need to call commit/rollback at the end. Usually, if you don't commit/rollback a non-autocommitted connection, the transaction get's committed/rollbacked when you close the connection - that depends on the JDBC driver. But it's never a good idea to ommit the commit/rollback calls on a non-autocommit connection. Usually you enclose your code in a try/catch block like this:
con.setAutocommit(false);
try {
   con.commit();
} catch (Exception e) {
   con.rollback();
} finally {
    con.setAutocommit(true); //or:
    con.close();
}

GET RESPONSE and GET STATUS

Hi all,
I wish some information about use of get response and get status commands or where I can find answer to my questions.

Hi, GET STATUS command description can be found in GlobalPlatform 2.1.1 specification and ISO/IEC 7816-4 standard.
GET RESPONSE is described in ISO/IEC 7816-4 and 7816-3 standards.
Best regards,
Eve

I got a question regarding running iOs and Windows using virtual software.

Greetings!
I got a question regarding running iOs and Windows using virtual software. I recently bought a monitor so I can display Windows on it and run both OS at the same time.Now,I'm using BootCamp. I downloaded VirtualBox for "tranferring" Windows on it. Since I'm a new iOs user , what do I need to do in order to make work?
Do I need to un-install Windows from BootCamp,install VirtualBox and then install them again?
Any information would be appreciate it!

That should work to use OS X, you can run MS Windows using Virtual Box and use a seperate display for the Virtual Box window. That way you can run OS X and MS Windows simultaneously. However remember Virtual Box is freeware and not a commercial application like Parallels or VMWare Fusion and may not have the features of a commercial application. Support for Windows run in any virtualization application (Virtual Box, Parallels or Fusion) is not generally done on this forum as they are not OS X related. To get help on those apps you usually will need to go to their forums.
Remember IOS will not run on either OS X or MS Windows, it only works on IOS devices.
Good luck with your installation.

GET OBJEC and GET PERNR

I am new to ABAP-HR.......
what is the difference between GET OBJEC and GET PERNR.
Iam asked to write a program using logical databases .. which one should I use ...
thanks,
shekhar....

Hi Nevali.
I would like to suggest,
OBJEC - Work Area for Database PCH
PERNR - HR Master Data Reporting - PNP
Differences,
GET OBJEC - Reporting on Personnel Planning data
GET PERNR - Reporting on HR master data.
I would like to suggest a Reference,
[SAP HELP - Standard Reference for HR Logical Databases|http://help.sap.com/saphelp_nw04/helpdata/en/c6/8a15381b80436ce10000009b38f8cf/content.htm]
Hope that's usefull.
Good Luck & Regards.
Harsh Dave

Get latepernr and get pernr

Hi all,
can u explain the get event functionality ?
Can u tell me the difference between
get pernr and get late pernr.
when should i use these type of statements ?
Regards
charan

Hi Ravi,
GET PERNR event initiates the data extraction for a pernr.
GTE PERNR LATE event is triggered after all the other events are triggered and right before the end-of-selection.
PL take a look at the following <a href="http://help.sap.com/saphelp_47x200/helpdata/en/ac/764da4496f11d3967200a0c9306433/frameset.htm">SAP Help</a> where it is explained very clearly.
Regards,
Suresh Datti

Get-ADReplicationFailure and Get-ADReplicationUpToDatenessVectorTable

Hi,
Where does the Get-ADReplicationFailure and Get-ADReplicationUpToDatenessVectorTable cmdlets retrieve it`s data from?
Lets start with Get-ADReplicationFailure: It shows 2 replication failures which is not current. Running the following in the same environment shows no errors:
$dclist= get-addomaincontroller-filter *
foreach($dc in$dclist) {
repadmin /showrepl /csv | ConvertFrom-Csv
Get-ADReplicationUpToDatenessVectorTable: This cmdlet returns a lot of Microsoft.ActiveDirectory.Management.ADReplicationUpToDatenessVectorTable objects. Many of them have old timestamps and
no value for the Partner property:
LastReplicationSuccess : 26.04.2010 21:01:02
Partition              : DC=domain,DC=local
PartitionGuid          : 7ddec540-31db-44d3-9ab5-d5adb479627e
Partner                :
PartnerInvocationId    : 0e2fbc85-8d50-4c30-ae65-27648a0888b9
Server                 : dc01.domain.local
UsnFilter              : 19853
These are probably old domain controllers which is decomissioned years ago. Why does these show up? And where is the cmdlet getting this data from?
The replication topology seems healthy using the legacy tools, but the new cmdlets isn`t giving the same impression.
Some clarifications would be appreciated.

Hi scripter42,
The Get-ADReplicationFailure cmdlet returns all failures currently associated with a given domain controller or Active Directory Lightweight Directory Services (AD LDS) instance. The return object is of type ADReplicationFailure. This cmdlet returns the
list of failures in the ADReplicationSummary object for a specific server.
The ADReplicationUpToDatenessVectorTable displays the highest Update Sequence Number (USN) for the specified domain controller(s). This information shows how up-to-date a replica is with its replication partners.
Regards,
Lany Zhang

Demantra 7.3 ,Analytical Engine Is not getting up and getting terminated

Hi,
When i am trying to make my Demantra 7.3 - analytical engine up on linux server, is not getting up and getting terminated. Can any body help me in the same.
For your information
Mine Weblogic server is 32 bit and linux operating system is 64 Bit.
Thanks in advance.
Thanks,
Ankur Dawra
Edited by: Ankur Dawra on Aug 16, 2010 2:52 PM

If that specific patch is causing a conflict with CU7 or Rules Engine Update Service, the best option would be to LOG a case with Microsoft and let them either fix it or provide a justification of why that specific Windows Patch is not a good idea (file
an exemption in case of later with the customer/security team).
Regards.

Few questions regarding Oracle Scorecard and strategy management.

Hi,
I have following questions regarding Oracle Scorecard and strategy management:
1. What are the ways in which i can show status of a KPI, like we have colors and symbols, what are others?
2. can we keep log of KPIs, store them, keep report of feedback/action taken on that?
3. Does Scorecard and strategy management have ability to retain history on feedback and log of
entries i.e. date/time, user name?
4. Does Scorecard and strategy management have ability to use common mathematical formulas e.g. median, average, percentiles. Describe.?
Thanks in advance for your help.

bump.

[Mac mini] Display getting dark and get back to normal, If there is an idle mode, where can I adjust it or turn if off?

MAC MINI (Mid 2011)
OSX Yosemite 10.10.2 / OSX Mavericks 10.9.5
While I were using mac mini for a while, the external display (LG_22MP55) has been getting dark and getting back to normal.
Did it enter into idle mode?
Anywhere I can find, can't find the related options to turn it off or adjust it.
Even adjusting "Never" for both "computer sleep" and "display sleep" can happen this annoying situation.
Beside, I have tried to connect iphone5S to external display (LG_22MP55) and double check LD will not enter into idle mode itself.
So, I guess this situation was happened by MAC mini.

When I use find file http://www.macupdate.com/app/mac/30073/find-file (which does tend to find files that "Finder" can't), it's not coming up with any other itunes library files that have been modified in the past week, which I know it would have been - unfortunately, I don't have a very recent backup of the hard drive. It would be a few months old so it wouldn't have the complete library on it....any ideas? I'm wondering if restarting the computer might help but have been afraid to do so in case it would make it harder to recover anything...I was looking at this thread https://discussions.apple.com/thread/4211589?start=0&tstart=0 in the hopes that it might have a helpful suggestion but it's definitely a different scenario.

MOVED: question regarding CPU temps and latest bios (1.8)

This topic has been moved to AMD64 nVidia Based board.
question regarding CPU temps and latest bios (1.8)

I'd believe the first bios's temps more than the second...
However what temps are given when using speed fan and/or everest? (in windows)

How to get subtotal and total per project in PS Module cl_gui_alv_grid

Hi all,
i have a requirement of getting Subtotals and totals of few column in the alv grid. as i have already used cl_gui_alv_grid class to display the grid , so what excatly i have to follow to get the values.
i have tried with :
wa_sort    TYPE lvc_s_sort
    wa_sort-spos = '1'.
    wa_sort-fieldname = 'POST1'.
    wa_sort-up = 'X'.
    wa_sort-subtot = 'X'.
    APPEND wa_sort TO t_sort.
    CLEAR: wa_sort.
And in fieldcat have passed X to do_sum field.
and
      CALL METHOD grid1->set_table_for_first_display
     EXPORTING
           is_variant                    = w_variant
           i_save                        = 'A'
           is_layout                     = t_layout
           it_toolbar_excluding          = t_toolbar_excluding
     CHANGING
        it_outtab                        = it_final_1[]
        it_fieldcatalog                  = t_fieldcat
        it_sort                          = t_sort
     EXCEPTIONS
       invalid_parameter_combination     = 1
       program_error                     = 2
       too_many_lines                    = 3
       OTHERS
But i coudnt see any subtotal column and total column in the grid.
please help

But i coudnt see any subtotal column and total column in the grid.
please help
you did every thing correct.
but if you want the subtotals you have to do one more thing.
that is you need to mention the do_sum = 'X'. for the columns which you want to see the subtotals(quantities, currency etcc) in the fieldcatalog.

Questions regarding xft fonts, and awesome wm

Hi, I just tried ArchLinux yesterday and loving it!
I use JWM, but am very interested in dwm/awesome wm. I do have some questions:
1. On a thread in the forum, it is mentioned that dwm has no Xft support. How useful exactly is Xft? Would it impact on design work involving GIMP/Inkscape/Scribus?
2. Does awesome have Xft support?
3. I installed awesome, but I have no idea on what keys to use. The shortcuts are different from dwm. I tried to look for quick tutorial just to get the basics (dwm has one on their website), but seems like all documentation I found have none of that section and go straight to configuration.
Do I actually have to configure the wm before I can use it at a very basic level?
4. I would like to do some more comparison between wms, trying to find a good balance for me in regards of lightness and functions I need. However, I have no idea on what to use to keep track of cpu/memory usage for all the wms. What's a good way to do this?
Thank you in advance.

Welcome to Arch!
1. The lack of xft support in dwm mostly just means that you won't get anti-aliased fonts in the status bar. Individual applications will still have the same font support they had before you used dwm.
2. Awesome uses pango for font rendering, which is even better than xft.
3. Look at the man page for default key bindings. It's more or less usable out of the box, but you will definitely want to customize it somehow.
4. A good system monitor is htop. Install it from the repos and run it from a terminal.
Last edited by fflarex (2009-02-23 18:44:45)

GET PAYROLL And GET PERNR Events .. Query

Hi All
I have used Get Payroll Event to fetch data from Database for Payroll Reporting.
It work fine for me till now..
But i am not sure that ,it can be used indiviusally without GET PERNR Event.
And wht are the other conditions to be usedd in Get Payroll Event...
Regards
Lakhan

Pernr Is the personnel numbers
for a particular Country
Country you can use MOLGA
GET PERNR
GETPAYROLL
You can loop and get the resuults for the Employee for that particulat Country
Ok
Take Care

PNPCE Questions Regarding GET PERSON and GET PERAS

Similar Messages

Maybe you are looking for