PNY GTX 780 freezes in HP welcome screen!

I have a HP H9-1060sc
And my Problem is i like to set in a New Grafik Card a PNY GTX 780 Card
I have remove all Nvidia GTX 580 Drivers from Remove Programs
CLose the PC Down
Set in the new GTX 780
Start the PC and it stand still on Boot Screen ( BLue HP screen ) after 30sec 1 BIB
And nothing Happens after.
If i try and load in Safe Mode same problem is i set old Card back in the PC boot like a charm....
I need to help here :-)
This question was solved.
View Solution.

Hi Makeway,
I see that you having some issues installing the new graphic card. I did some research and the discovered that the new graphic card requires a PCI Express 3.0 slot but the motherboard in your computer only has PCI Express 1.0 slots. I have included the specifications for both below. Under the Expansion slot for the motherboard it shows PCI Express x16 and PCI Express x1 which means that it is only 1.0. Unfortunately, that card isn't compatible with your computer.
GeForce GTX 780
HPE h9-1060sc Motherboard Specs
Thank you,
Please click “Accept as Solution ” if you feel my post solved your issue.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Thank you,
BHK6
I work on behalf of HP

Similar Messages

Geforce GTX 760 freezes in HP welcome screen!

Hi,
I've got an issue with installing a new VGA on my HP pavilion HPE-H8-1206eo.
I'm trying to install a gigabyte GeForce GTX 760, but it won't work. The screen freezes in HP welcome screen and the BIOS beeps a couple of times.
Is the VGA compatible with my system?
I've upgraded my power supply, uppdated my BIOS, tested the VGA in another system, rebooted with new drivers but it won't work.
Can you help me?
Magnus
This question was solved.
View Solution.

Hi MagnusR,
I see that you are looking to install the GeForce GTX 760 in your Pavilion. I did some research and the Pavilion only has PCI Express 1.0 slots and your GeForce requires a PCI Express 3.0 below I have included the links to the specs for both pieces of hardware.
Pavilion HPE h8-1206eo Specs
GeForce GTX 760 Specs
Thank you,
Please click “Accept as Solution ” if you feel my post solved your issue.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Thank you,
BHK6
I work on behalf of HP

Satellite A100-590 PSAA9E freezes on Toshiba welcome screen after BIOS update

Hi.
Yesterday I did a BIOS update on my Satellite A100-590 PSAA9E-03Z00QGR with the appropriate flash:
http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_driver_details.jsp?service=EU&selCategory =2&selFamily=2&selSeries=153&selProduct=624&langua ge=17&selOS=10&selType=all&yearupload=&monthupload =&dayupload=&useDate=null&mode=userMachines&search =&action=search&macId=&country=all&selectedLanguag e=17&type=all&page=1&ID=58477&OSID=-1&driverLanguage=42
bios-20070709111839.zip
After the flashing procedure the machine rebooted automatically, but unfortunately it now keeps hanging at the Thoshiba welcome screen. Also pressing F2 or F12 won't change anything. It seems like the BIOS is corrupt.
I saw, that in the BIOS package are delivered two flash files (s10gm590.rom and s10pm590.rom). But just executing the SanAntonion10 BIOS590MP.exe a .vbs script is started that decides automatically chooses and loads a flash file. Maybe it chose the wrong one?
What shall I do now? Is there a way to restore the BIOS, or do I have to send my notebook in?
Thanks in advance
MAT

> Satellite A100-590 PSAA9E freezes on Toshiba welcome screen after BIOS update
What to say Marc. It looks like you have used a wrong BIOS version or you have updated the BIOS in wrong way.
You could try to access the BIOS and try to set the settings to default.
Dont forget to save the settings if you will exit the BIOS.
But if this procedure does not help, you will have to contact the ASP in your country.
Possibly the guys will try to flash the BIOS again with other special version.
Good luck
Greetings

5800 freeze in NOKIA welcome screen

my phone turned off and when i want to turn on it again, it freeze in its welcome screen (NOKIA) without the handshake presenting. and it took so long 'til my battery dropped again.
yeah, i had a problem same with you guys .
and what i do is remove my memory card BEFORE i turn on my handset.
voila !, it back to normal .
but, if i turn off and turn on again (memory card still inside), it just initiate the screen NOKIA without the handshake presenting.
it drive me crazy.
what is the solution? , i don't wanna remove and insert my memory card everytime i use my phone.
please help me guys !

I had this issue as well ... when turning my Nokia 5800 XpressMusic on, it would freeze at the Nokia start up screen. I had installed lots of apps from the Ovi Store over a periods of a couple of months, so I cannot say which one was "to blame" for the sudden freezing.
Taking out the battery, even for hours, did not help in my case.. When I pulled out the (8Gb) MicroSD card then turned the 5800 on, it booted without a problem ... though of course I did not have access to any apps which had been installed to the MicroSD card.
Posters elsewhere have stated that in the situation described above, the problem is that the MicroSD card is corrupted, and must be reformatted. While I'm sure that would work, I think it's a little extreme as a first step.
There is an interim step that worked for me: try first running software (such as MS Windows' Check Disk) that can correct corrupted files on the MicroSD. There are many ways to go about this. I did the following (I run Windows XP on my computer).
1) remove the MicroSD card from the Nokia 5800 (be sure to follow the instructions in your manual)
2) insert your MicroSD into a card reader, and plug the card reader into your computer (if it's not already attached to your computer).
>>> At this point, it's a good idea to back up the data on your MicroSD card to your computers's hard drive before you go further.
*** the rest assumes you have Windows XP ***
3) After a few seconds, Windows XP should recognize the MicroSD card as a drive. In my case, a dialog box called "Removable Drive E" popped up. Your Dialog Box may have a different name. If so, substitute that name in the instructions below.
4) Scroll down within the dialog box until you see "Open Folder to View Files using Windows Explorer", and DOUBLE-LEFT-CLICK on it.
5) A Windows Explorer windows opens up. RIGHT-CLICK on "Removable Drive E" and when the dialog box opens, LEFT-CLICK on "Properties"
6) A new window opens, called "Removable Disk E Properties". Select TAB "Tools"
7) Inside the "Error-Checking" section on top, LEFT-CLICK on "Check Now ..."
8) A small window called "Check Disk Removabl ..." opens. Make sure both "Automatically fix file system errors" and "Scan or and attempt recovery of bad sectors" are selected, then LEFT CLICK on the Start button.
The Check Disk program will run for several minutes, and hopefully fix any corrupt sectors on your MicroSD card.
9) When Check Disk is done, shut down all the dialog and Windows Explorer boxes, then remove the MicroSD card. IMPORTANT: to prevent further data corruption, make sure you use the Windows "Safely Remove Hardware" utility before you physically remove the card reader and MicroSD card from your computer.
10) Insert the MicroSD card back in your Nokia 5800, then turn on the 5800. If Check Disk found and fixed the corrupted files, your 5800 should boot without a problem.
If after all of this your 5800 still freezes at the Nokia logo on start up, you might proceed with the card reformatting suggestions made by others. Good luck!
Cheers,
Bruce

S10E freezes at the "Welcome" screen

Hello,
I bought a S10e a couple of days ago. The programs I installed were by no means exotic - AVG (I gave Norton a try and then removed it using Norton Removal Tool before I transferred the AVG Free offline installer from my desktop PC), Open Office, WavePad and PhotoFiltre. I noticed that windows hangs at the welcome screen from time to time and so I used the recovery program to reset everything. On the fresh copy of XP I installed AVG, MS Office, Demon tools lite and WavePad. The hangs continued I have no idea why... The only thing that comes to my mind is the fact that I don't have a wireless connection at the moment so there can be some kind of problem with some program's updater (and namely AVG's).
Any thoughts how to solve this?
P.S. I saw this thread but I think that this can be a different issue as far as the recovery program didn't help
P.P.S. Sorry for my Engrish

Thanks!
Today I had enough time (and access to the university's wi-fi ) to do some tests. I came to the conclusion that AVG's updater was causing the trouble. I installed Avira and now the computer seems to work fine (more than dozen restarts and no hangs so far). It's a pity for AVG (one of the best free AV solutions around), but I guess the current build causes problems on IdeaPad systems without active Internet connection. Hopefully the guys @ Grisoft will have this issue fixed as soon as possible.

Gtx 760 freezing on hp screen

my asus gtx 760 freezes on the hp screen currently i have a 8800 gs installed in it works fine, i put the 760 in and it freezes there everytime, I have uninstalled the drivers and does the same thing.
my pc: hp pavilion p7-1240

Hi,
The NVIDIA 760 video card is probably not compatible with the BIOS in your PC. Contact the video card manufacturer for a remedy.
What replacement power supply did you put into your PC?
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT

Has anyone else encountered a distorted/skewed Ai CC 2014 Welcome screen?

I'm running Ai CC 2014.0.0 (v18.0.0) on Mac OS X 10.7.5 Lion.
The the content of the Welcome screen is distorted/skewed.
Has anyone else encountered — and resolved — this?
NOTE: I just now updated Ai CC from v18.0.0 to v18.1.0.
I get the same thing: A distorted Welcome screen.

Sumit, THANK YOU for your follow-up. It certainly is appreciated!
I visited the thread you provided the link to (above) [https://forums.adobe.com/thread/1512827], and duplicated the steps described in the final entry, by Yankee Rebel on August 6, 2014, which is:
Thanks for your response but the problem is no longer a factor. I went to Applications/Adobe Illustrator CC 2014/Adobe Illustrator.app/Contents/MacOS/CEP/extensions and removed "com.illustrator.welcome" folder. That stopped it.
I was having a seize-up problem in In-Design upon launch. It would boot but then freeze when the "welcome" screen popped up. I also deleted the welcome screen docs from In-Design in much the same manner as described just above for Illustrator. It then ceased to be a factor.
A note about the navigation route (Applications/Adobe Illustrator CC 2014/Adobe Illustrator.app/Contents/MacOS/CEP/extensions):
In case anyone else makes use of this, be aware that when you get to "Adobe Illustrator.app" you have to hold down the Control key when you click on the app. The Control key reveals, among other options, "Show Package Contents." Select that, and then the "Contents" folder; then follow the rest of the navigation directions.
The above worked for me; no more Welcome window (distorted or otherwise).
Although that window is desirable for its links to New Features, those can be accessed via Illustrator's main menu > Help > Illustrator Support Center. That will take you to the Illustrator CC page on the Adobe website, where you will see these links:
"Overview," "What's New," "Learn & Support," and "Download."

Muvo^2 Hangs at Welcome Screen (Showing the word "CREATIV

This is the first time I have posted in this forum.
I have a problem with my Nomad MuVo^2 .5 GB player.
It seem to be working fine until I have re-formatted it by using it's recovery mode.
And then I upgrade a firmware to the lastest (.6.0) version.
Since that there was a little problem.
The process of upgrading the firmware seem to be really slow.
And when it completed it said something like the device is rebooting.
And then I heared the unpluged sound from windows XP (The sound that happen when you disconnect the player from USB port)
Since that there was nothing happened
So I looked at the player's screen
It's freezing at the welcome screen (The screen showing the CREATIVE logo) and nothing else (no harddisk reading sound or anything)
I have tried pressing every button but nothing happened so I need to remove the batteries and replaced it again but the player stilled got the same problem
I can't pass through the welcome screen even if I tried the recovery mode, it doesn't show anything else except the welcome screen
no recovery mode no loading music nothing.
Anyone know how should I do to fix my player problem?
Thanks in advance

If you can't get into Rescue Mode the player has a serious problem. You need to contact Creative Support.

Gtx 780 lightning stopped working

Hello! Today i played some batman arkham origins. In a middle of a fight i got a blackscreen and the sound started to loop. I restarted the computer and My gtx 780 lost signal with My screen. Ive tested all pcie ports and IT wont work, ive tested vga,hdmi and dvi cables and it wont work, ive checked all My cables and everything is right. I did test an old gtx560ti and i got a signal directly. So i guess something is wrong with the gtx 780. I noticed that the leds blinks in a way they dont have before , and now the leds above the card dont light up at all. Is it broken? What should i do?

Quote from: neoclerodane on 24-March-14, 21:17:41
Whoa, that's strange.
Is there any information out there about what the blinking lights could mean? Sometimes they mean certain things based on the interval of flashes/how long they flash for.
I'm doing some googling for you right now - but I'd say look in that direction too.
Ive been googling about those leds all day, i cant seem to find anything about It tho. The card is only 2 weeks old so this is something really strange

Windows 7 hangs at welcome screen on iMac

I have installed windows 7 on my iMac using bootcamp. The windows installation went smoothly. after installing the bootcamp drivers the windows started freezing on the welcome screen.
I did dome research online and figured out the problem, its the bootcamp which starts up o the Windows load. Please help me how to over come this issue.

you can start with getting the graphic driver from the vendor, there is trouble with using Intel 3000 and seems like the Mini have more trouble than others - they all have some trouble - and uninstall Apple gpu drivers - with Driver Sweeper 3.2+ (not older) and CCleaner (clean Registry).
You should be using Lion Boot Camp Assistant and BC 4.01+ drivers with any 2011 model (or later) too.

Windows 7 x32 freezing at welcome screen

Hi,
I've got an image which is currently deployed around the workplace. Recently we updated the server to ZCM 11.1 and therefore I updated the agent on the previous image, recaptured and redeployed.
I've noticed after a few weeks there are random issues occurring such as the Welcome screen freezing up. Now this did not occur on the same image, different ZCM agent version, but it is occurring now with ZCM agent 11.1. I've got all the latest updates from MS and Novell (updated Novell Client as well) but when users log into a room of 30 computers, a third of the room's computers will freeze up. Powercycling the computer and then attempting to login a second time will generally work OK.
I've gone around and logged in myself to each computer and I had a few freezing up. Eventually I got to a point where it would log in without a hitch. Two days later, staff are complaining of the computers freezing up.
I've looked through Event Viewer but did not find anything out of the ordinary. The workstations do have a DLU applied but users are set to administrators so that doesn't seem to be affecting it I don't think.
Is anyone else experiencing these issues or something similar? Any ideas on what could be causing it?

Originally Posted by psc
Looks like ZCM 11 SP2 has resolved our freezing issues. Our desktops are currently running Windows 7 x64 SP1, Novell Client 2 SP2 (IR2), ZCM 11.2 (with the ZESSERVICE present) and Sophos 10.
Good luck,
Anthony
good to hear
We have 11.1 and i experience random "logon delays" - maybe not connected to the case you described:
* happends very seldom (1 out of 20 or 30 logons)
the logon delay of ca. 30 seconds happens after succesful novell login and before windows logon takes over and shows the "[rotating circle] welcome"
it seems like a timeout with the Zen Agent. Hope i will not see it with 11.2
Markus

Just installed this. When I open it a blank welcome screen comes up and when I try to delete it freezes my computer.

Just installed Photoshop - blank welcome screen comes up and freezes my computer. Any help?

Wait a minute or two for the screen to load the content, scroll to the bottom and checkmark "Don't show welcome screen again"
Gene

Installed new graphic card (ASUS Geforce GTX 750ti. PC stuck at the blue welcome screen

Hi,
I just bought the ASUS Geforce GTX 750ti STRIX OC Edition (without external power connector).
After I installed it, I wont get past the HP welcome screen. It gives one beep 3 times, and then 1 and 2 short before the screen turns black.
My computer is:
HP P7-1072sc
(I have installed a 500w power supply.)
Running on windows 7
Anyone have any ideas?

Hi,
There is a BIOS update posted for you PC but I don't think that it will solve your problem. You might want to install it and see if anything changes.
You may have to RMA the graphics card back to ASUS. ASUS may be able to flash the BIOS on the card to make it work or replace it with a different graphics card that will work.
Many of the NVIDIA GTX 750 graphics cards are enabled for a full UEFI BIOS PC and your PC is not at that level.
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT

Toshiba Satelitte C655-S5132 freezes at welcome screen

Hi
I am having trouble getting my Toshiba Satelitte to get past the welcome screen. It is getting hung up on the welcome screen after I put in my password. It just never loads and I end up with a black screen.
I tried using the System Repair Disk to do a system repair that came with the system but the repair disk stops after a little while and displays the message : ... Unspecified error Ox8000ffff and asks me to try again using a different restore point. I try a different restore point and I get the same error message. After several attempts of trying to get a restore point, I gave up trying to use the system repair disk.
I am not sure what to try next. Any help would be very appreciated.

Hi Jerry:
Yes, I do have that disk. I am just not sure which option I need to try next. The system restore option did not work. Start up repair did not find an issue. After running start up repair I get the message: "if you have recently attached a device to this computer such as a camera or portable music player remove it and restart your computer.... but there are no devices attached.
My disk has some slightly different wording but perhaps they are the same:
My disk has the following options in this order:
1. Start up repair (did not have any effect on issue)
2. system restore (after 7 tries with different restore points no luck)
3. system image recovery (have not tried this yet)
4. Windows memory diagnostic
5. Command Prompt
6. Toshiba recovery wizard (which asks for more disks that I do not have)
I am just not sure which is the best course to take from here.

Welcome Screen Freezes Mac 10.7.5

I downloaded the latest update to PS2014 CC a little bit ago and when I launched it it froze similar to the way Illustrator and In Design did several months ago.
With that prob I had to go to the app's icon, right click and choose "show package contents". From there I had to delete a file but have forgotten what and where it was.
Is anyone else experiencing same prob or know how to delete the conflicting file?
Thanks, Tony
Mac Pro (2006) 2 x 2.66 Dual-Core, 8GB 667 MHz DDR2

Gautam,
I am having the same issues with both Photoshop and Illustrator.
The Adobe rep helped me install the older version of Photoshop but now having the same issue with Illustrator.
Reverting to the older version is only a temporary fix and does not really seem to be the very best answer, can you offer a better solution that allows the end user to have the latest software and do away with the useless "Welcome" screen?
Yankee has the very same issue I am having. Changing up the preferences file does nothing to help. Need to delete or rename the specific file related to the welcome screen, can you offer help?
Thanks in advance.

PNY GTX 780 freezes in HP welcome screen!

Similar Messages

Maybe you are looking for