PNY Quadro K5000 Mac Edition - Audio Problems via DP/HDMI adapter

Hello,
as stated in the topic I have some troubles to get the sound working on my TV witch is plugged into the Mac Pro via HDMI/DP adapter.
Setup:
Mac Pro 5.1 with OSX 10.9.5
Graphics PNY Quadro K5000 Mac Edition
My Question ist this: Ist there a Problem with the OSX, the Card or the Adapter?
The Macs Internal sound works fine. The TV plugged into a Laptop via HDMI works too.
If anyone has a similar Setup or a clue whats going on, I would very much apriciate some help.
best regards from germany,
osslord

Do you have anything plugged into the headphone jack? If so unplug it.
Next try resetting the SMC anf VRAM
Intel-based Macs: Resetting the System Management Controller (SMC)
About NVRAM and PRAM

Similar Messages

HT3153 Can the early 2006 MAC mini support a DVI to hdmi adapter for TV monitor support?

Can the early 2006 MAC Mini support a DVI to HDMI adapter for a TV Monitor?

Hi, I can't see why not...
Supports digital resolutions up to 1920x1200 and analog resolutions as high as 1920x1080.
http://www.everymac.com/systems/apple/mac_mini/specs/mac_mini_cd_1.66.html

Solution: Hercules DJ Console MK2 Mac Edition Installation Problems

hi
if anyone has problems installing the hercules dj console MK2 MAc Edition under Leopard 10.5.0:
Hercules:
A temporary solution to install today's drivers in Mac OS 10.5 (we will release soon a new installer for Mac OS 10.5) consists in:
1) Display the installation package .pkg file (right click the file with Ctrl-click) and select ShowPackage Contents,
2) Enter in Contents/Resource and delete the file InstallationCheck,
3) Run the installation package again, and this time the installation will run OK in Mac OS 10.5.

Welcome to Apple Discussions:
Since you say this happens with mail, and other apps, it's probably not related to your Hercules system directly.
When you run the Mac by itself, with everything else unplugged, do you get the spinning beachball much?
You may need to run the disk utility and repair the HD and the permissions.
It's also possible that some 3rd party SW you may have installed is causing the problem. Be sure all 3rd party SW is fully compatible with Leopard and has been tested with the latest versions.
Check your console logs for information about this, and also run the Activity Monitor to see if something is taking up a lot of CPU ticks.

Overwrite edits - audio problems

Hi
Everytime I do an overwrite edit onto my timeline sequence I have audio problems. For example the current edit has 4 audio tracks connected to the video, and the new edit only has 2, but when I do an overwrite edit audio tracks 3 and 4 keep the old content. Is there a way around this? Would appreciate any help.
Thanks

I'm afraid there's not a way for 2 tracks to overwrite 4. (funny too, you'd think there was a way) You'll have to lift them out...
Shouldn't happen a lot to you though if you get your base 2 track audio done before you add any more audio tracks. Such as locking your video and sync audio then add effects or music...
Jerry

Prior to installing iOS 6 on my iPhone 4, I could stream video and audio via "Air Video" and "Stream to Me" from my PC, to my TV via a HDMI adapter. Now I can only get video and no audio.

I have been able to stream,via wi-fi, TV shows, movies and music from my laptop through a HDMI adapter via my iPhone 4, to my television. I use mainly "Air Video" but also use "Stream to Me", both with the same results. Since the update to iOS6 this is not possible. I can still get video but now no audio. Help me!

I too am having this very problem. I have an iPhone 4S that is less than one year old. Prior to updating my iOS firmware, I was able to record and transfer video to my PC and view it with a variety of programs without any modifications. Since updating the firmware, all videos that have been taken are not viewable on my PC. I can hear the audio associated with the video, but the video is blank. I can transfer the file off my phone using the Windows transfer tool. Then sync the video back to my phone and it works just fine. I tried emailing the video to myself, that did not work. I rebooted my computer, no luck. I reinstalled QuickTime, still isn't working. I can still watch the videos that were made with iOS 5.1.1 but nothing made with iOS 6.
I have been successful with the following procedure: Once the video is transfered from the phone to my PC, I change the extension from .MOV to .MPG and this makes the video viewable with Windows Media Player; however, if the video is shot in a portrait orientation, it displays sideways in WMP as a landscape orientation. I have been able to then run the video through Microsofts MovieMaker program to right the video 90 degrees but the image comes out a little squatty like it's out of scale. In either case, it serves the purpose and I can export it to another .MPG format that I can then run through Sony Vegas and edit as I see fit. While it works, this is a huge hassle and I shouldn't have to do it.
Does anyone know of anything that is working? Are there new codecs somewhere that windows users need to get a hold of?

Audio through Mini Displayport (HDMI Adapter)

I'd like to connect my MBP to my amp using a HDMI adapter. Will any audio pass through this? Enabling a 5.1 output?
Cheers

Okay, now I'm confused. I always understood the digital audio limitation on the mini display output to be the result of stepping it down to DVI before bumping it back up to HDMI with an adaptor. Unless there's a mini display-to-HDMI option AND the mini display port is wired for audio, I don't expect anyone will be making a single-port, single-cable solution anytime soon.
In any case, that's not what caught my attention on this thread... I'm still trying to get dolby 5.1 (i.e. AC3 passthrough) to work +at all+ on my audio output with a Toslink adaptor and Quicktime/iTunes. I've noticed that Plex passes AC3 bitstreams over the Toslink without any issues, so I know it's not an Apple hardware limitation. I just don't want to use Plex to watch my movies in 5.1
I've messed around with the output settings nine ways to Sunday, but it's obvious the downconversion to digital stereo is happening in QT long before it ever gets to the hardware. Has anyone heard a good reason yet why AC3 passthrough was disabled in Quicktime and iTunes? It used to work.

Mac Mini Audio Problem

Hi,
My Mac mini is only sending sound to one side of the headphone. I can get sound on the right but no sound on the left. I'm wondering if the sound card might need replacing ???
Any help would be appreciated.

Actually I'm trying to hook it up to my stereo so I was trouble shooting with the headset as I only get sound from one speaker. The Bose rep suggested I try a head phone to make sure the problem is coming from the mac mini. Is it possible to hook up to a stereo via a usb?(USB to Stereo input cables?) Also do you think that would help? I've tried new head phone to stereo cables between the two and same problem....

Mac book audio problem

hiho!
i have a problem with a black macbook. i tried to install skype (wich works fine as long as i don't call!). everytime i try to call it crashes. but that's only a small problem. i tried to look at my audio preferences in the systempreferences but the system-setting-app crashes if i click on sound setup.
the mac book is running mac os 10.4.8 with the newest security update installed. what can i do to fix it?
regards sepoe

Archive & Install OS X.
Jim
PowerBook G3 500 Mhz "Pismo"/ 2.0Ghz BlackBook 2GB OWC RAM Mac OS X (10.4.8)

Copying, pasting and editing audio problem?

hi, i have some audio tracks that i originally recorded in pro tools le
(no plugin delay compensation if using uad's or other 3rd party plugs dont even go there by the way)
and have exported them to logic 8 and changed the arrangment for a song.
The problem is when i cut and paste sections of an audio track to a different part of the song, if i trim, cut, mute or pull it back it changes the part of the audio that i originally pasted it from?
how do i stop this from happening?
can anyone help
thanks

Once you've copied/pasted the new region to where you want it, select the new region and press:
OptionCmdF
You will then be prompted to give a new filename for the audio file. This generates a new file, which can be edited separately from the original.

New Mac mini audio problem - beeping from audio output

Hi Apple fans
Please help me. I recently purchased a new Mac mini from my local store. It's three-and-a-half weeks old as of today.
It's an i5 2.3 with 8 GB of corsair RAM.
I like to watch movies and TV on it and have the audio connected to an external amp and speakers via the headphone output.
After a reboot today I lost the sound through that output. All that I hear through it now is an electronic beeping, six notes, descending in pitch, repeating.
I have no idea what it is, other than annoying since this happened on a brand new computer. Not looking forward to the idea of losing my mini for a week as Apple figure it out, but it may be all that's left to do.
Maybe somebody here can help me out - anyone have an idea what's going on? I did an fsck -fy already, and there seems to be nothing wrong, based on that check. For completeness sake, I ran the sound over a USB sound card, and the beeping noise was not there, and sound worked fine. Ditto for the internal speaker - no weird noise there, this seems limited to the headphone out port. I've tried different cables, and even amps, and a set of small speakers without amp. The noise is there when using the headphone jack, and it's absent when using the wee internal speaker or USB-based sound. Please help?
I captured the sound on a video which I've uploaded. It's kind of jarring, so keep your hand on the volume button.
http://www.youtube.com/watch?v=mUt8miCYcJQ
http://www.youtube.com/watch?v=mUt8miCYcJQ
Thanks much for any input - it would be very much appreciated.
Pascal

Hi Pascal,
Certainly strange, but I have no ideas other than having it looked at by Apple.

ATV2 Audio Problems on BOTH HDMI and Optical w/Denon

I know that it is a known issue that occasionally the ATV2 stops outputting audio over HDMI. But I'm having this problem over the optical out as well. I have it connected to a Denon 3808CI receiver, and it will work as expected for a couple days, they the audio will just go away and the only way to get it back is to unplug the ATV2, which is annoying.
Is anyone else experiencing this?
Also, those of you with Denon receivers... can you chime in if you're having NO problems? Maybe I have a faulty unit...
Thanks!

I use a 4308 and never had audio trouble with either atv1 or2.

Problem with lightning hdmi adapter

I Just got a new lightning digital av adapter To connect my iphone 6 plus to my tv. Initially it was working great, then I received a phone call.. Since then nothing. The little blue bar comes up on the top of my iphone screen for a few seconds, then it goes away. If I try watching any video, it displays only on my phone screen. Tried connecting to my ipad mini, and it worked just fine. I'm sure there's a simple solution but I'm stumped. Help would be much appreciated.

I don't believe that is possible.
Does the projector have an audio output jack to connect powered speakers?

DVI-HDMI Adapter for hooking up a HDTV...Few problems...

I have a spare 32" Sharp HDTV with HDMI, so I placed this next to my Mac Pro and used a DVI-HDMI adapter. Here are the problems:
With my standard GeForce 7300 GT you cannot use both connectors, as they are too close together - so I could not even test to see whether both DVI outputs can work at the same time. So I have to disconnect my 23" cinema display. Now, the Macpro recognizes the TV - in the display preferences - but the resolutions are not good - the only one that works is 1280x720. Other resolutions listed, ie, 1344x756 and higher are listed as interlaced and all cause flicker. This means I do not see the OSX top menus.
I wish to be able to show clients samples of edited movie clips on a HDTV both in FCP and standalone QT. I doubt that appleTV is the answer, as this only works in iTunes - plus, my Mac is next to my TV anyway.
Any thoughts on making this work better? I am trying to not have to buy a new video card. Maybe the Black Magic Intensity card for HDMI output is the answer?

I can live with the lower resolution - the TV is actually 1366 x 768, but the most annoying is not being able to use both DVD connectors on the card at the same time - they are too close together, how stupid is that?
Ideally, I would like to see both the cinema display and the HDTV running at the same time - or least not having to manually switch over the adapter at the rear.
I see no way around this, unless I change video cards but for $250 I can get the Black Magic HDMI card which outputs DV via HDMI to HDMI.

Nvidia Quadro K5000 for MAC, cuda, kernel_task, logic board

Mac Pro (Mid 2012) OS X Yosemite 10.10.2
Processor: 2 x 2.66 GHz 6-Core Intel Xeon
Memory: 64 GB 1333 MHz DDR3 ECC
Storage: 1TB SSD SATA (Start-up); 1TB SATA
GPU: NVIDIA Quadro K5000 4096 MB ("for Mac")
Hello Apple Community,
Originally upgraded to this Quadro card because, for what I was doing, the ATI card that came with this Mac wasn't cutting it. I was told by three different reps from three different companies that the Nvidia Quadro K5000 for Mac would be great for what I need. So far it has worked out to not be the case.
The issue started with simple projects overlocking the processor, which then resulted in the machine shutting down. For months now the computer has been randomly shutting down, at least twice a day. Its is odd that something is sending kernel panics when there isn't any stress involved.
Programs involved:
Adobe After Effects CC
Adobe Premiere CC
Maxon Cinema 4D r14
Please help! I really need to isolate this problem.
Core Information
Name: Quadro K5000
Compute Capability: 3.0
Clock Rate: 705.5 MHz
PCI Location: 0:5:0
Multiprocessors: 8 (1536 Cores)
Therds Per Multiproc.: 2048
Warp Size: 32
Regs Per Block: 65536
Threads Per Block: 1024
Threads Dimensions: 1024 x 1024 x 64
Grid Dimensions: 2147483647 x 65535 x 65535
Watchdog Enabled: Yes
Integrated GPU: No
Concurrent Kernels: Yes
Compute Mode: Default
Stream Priorities: No
Memory Information
Total Global: 4095.56 MiB
Bus Width: 256 bits
Clock Rate: 2700 MHz
Error Correction: No
L2 Cache Size: 48 KiB
Shared Per Block: 48 KiB
Pitch: 2048 MiB
Total Constant: 64 KiB
Texture Alignment: 512 B
Texture 1D Size: 65536
Texture 2D Size: 65536 x 65536
Texture 3D Size: 4096 x 4096 x 4096
GPU Overlap: Yes
Map Host Memory: Yes
Unified Addressing: Yes
Async Engine: Yes, Bidirectional
Performance Information
Memory Copy
Host Pinned to Device: 5664.07 MiB/s
Host Pageable to Device: 2502.42 MiB/s
Device to Host Pinned: 6335.43 MiB/s
Device to Host Pageable: 2494.82 MiB/s
Device to Device: 60.3412 GiB/s
GPU Core Performance
Single-precision Float: 1750.19 Gflop/s
Double-precision Float: 84.8746 Gflop/s
32-bit Integer: 359.53 Giop/s
24-bit Integer: 359.097 Giop/s

A kernel panic is not ONE problem, it is one of Hundreds to thousands of problems.
Use this article to find where the panic log is stored, then post the most recent kernel panic log here, in its entirety.
Mac OS X: How to log a kernel panic - Apple Support
If you only find Application panics, please post only the first page, as the rest is only helpful to the Application Developer.

I have an Iphone 4s and i can't make a connection to my mac and other devices via bluetooth! Why is this a problem and how can i repair it?

I have an Iphone 4s and i can't make a connection to my mac and other devices via bluetooth! Why is this a problem and how can i repair it?

"I have an Iphone 4s and i can't make a connection to my mac and other devices via bluetooth! ":
That is correct.
"Why is this a problem and how can i repair it?"
Becasue this has never been a feature of iphone/ipod/ipad. There is nothing to repair.

PNY Quadro K5000 Mac Edition - Audio Problems via DP/HDMI adapter

Similar Messages

Maybe you are looking for