PO amount should appear Once

Hi,
In my PO wise payment detail under PO amount column amount is displaying multiple times but my requirement is PO amt should display single for one PO number..
Thanx In advance

>
Madhukar Shetty wrote:
> Hi,
> po        line item        amount
> 1001      1                   500
> 1001      2
> 1001      3
> 1002      1                   100
> 1002      2
>
> If this is ur requirement then use
> use the Control statment
>
> AT NEW   PO
> pass the amount here
> endat
Hi Madhukar Shetty,
Thanx for replying
I used ur quiry but still it displaying multiple times as shown below
at new ebeln.
          MOVE wa_rseg-rlwrt TO wa_final-rlwrt. "PO
          endat.
Output:
Po number      Po date        Po amount
4510000075     10.04.2007     717,692.40
4510000075     10.04.2007     717,692.40
see in this output two PO numbers but should display only one PO amount...

Similar Messages

Delivery unit in material master should appear on item level of delivery

Dear SD Sales and Delivery experts,
i would appreciate your support very much!!!
We want to implement the following small functionality:
The components concerned are material master, order and delivery item.
The material master is maintained in folder <Sales: Sales Org1> in the field "Delivery Unit" e.g. with 10 PC
If the customer orders 20 pieces, but the existent stock just has got e.g. 13, the nightly delivery batch (VL10) should not deliver the amount of existent stock of 13 pc but should - e.g. after implementing a coded functionality - compare the 20 pc that have been transferred from order into delivery with 13 on stock and then rounds off to the next lower delivery step of 10 after looking up in the material master in folder <Sales: Sales Org1> in the field "Delivery Unit" maintained with 10 pc. These 10 pc should appear on item level of the delivery so that they can be shipped. Open amount of ten will be handled when the stock of this material had been filled up.
Same procedure within an another example:
Customer orders 57 pc - Stock has 39 pc = delivery should post 30 pc
I found the User Exit MV50AFZ1 but the steps in there seem to be to early.
Are there any BADIs wie can use?
Copy Control with Routines and Conditions?
Many Thanks in advance
Stephan Sislian

Hi,
I never tried, but did you check the field rounding profile in the material master Sales: sales org1 tab - under quantity stipulations?
Regards,

Credit amount not updated once gave reason for rejection

Dear all
i want to know one thing once i Gave reason for rejection to sales order or some line items that amount should play in credit Account of the customer
but in my case it is not Playing
ex: i have given Credit limit 20000 rs
now customer created one sales order with the value 20000 rs ...so Credit limit finished
Now Due to some problem Maintained reason for rejection for that document
now That 20000 rs should add in Customer account right but unable to create new sales order with that customer .
What is problem cause?

Dear Madhuri
RVKRED88 & RVKRED77 Run the programs then only it will be updated
please check this link Rejected orders decrease credit limit
Thanks a lot
venu

DA amount not appearing in infotype 008 & in Remuneration Statement

I am learning Payroll-India on IDES 6.0. I have configured Dearness Allowance using "Incremental CPI slab based Calculation" method (not yet sure how I did it! will try to figure out!). I executed the "DA Report" for a personnel number and the VDA amount is computed there (it shows Rs. 1200). After this I used the "Start Payroll" to run the payroll for the personnel number. But the VDA amount is not appearing in Infotype 0008 for the personnel number. However, the text for the VDA wage type "Variable DA") is appearing. In the remuneration statement, neither the wage type text nor the amount is appearing ( I have done the necessary configuration to include the wage type in window W1).
Please guide me on what could be going wrong.

Hi,
Now the VDA amount is appearing in infotype 0008 of the personnel number. I ran the DA batch program for the personnel number and then uploaded using sm35.
After this, I started the payroll run for this personnel number, which was successful. But in the Remuneration Statement, neither the VDA text nor the VDA amount is appearing (I have done the necessary creation & transfer of the VDA wage type in Remuneration Statement).
Please guide me.
I have a related query. For the VDA wage type, I have set INVAL B in the wage type characteristics. Is it okay? If so, how should I create the entries for VDA wage type in the screen "Maintain Valuation of Base Wage Types" & in the screen "Calculate Eligibility for RAP's"?

How to add round image inside the table column? with different background color, column value should appear in the middle of the round portion.

Hi
This question is related to table component implementation.
I want to display the column values inside the small round image with different colors and value should appear in the middle.

Hi,
>>1. how can i align Title(DCS Clinical Report-Technician wise) center of pdf report with image named:logo5.png immediately coming to it's right?.
2. how do i add the given below row and it's data to my top my table in pdf report from c# windows forms using itextsharp?
3.how to make my column headers in bold?<<
I’m sorry for the issue that you are hitting now.
This itextsharp is third party control, for this issue, I recommended to consult the control provider directly, I think they can give more precise troubleshooting.
http://sourceforge.net/projects/itextsharp/
Thanks for your understanding.
Regards,
Marvin
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

My IPod nano (older version) is frozen, so I can't do anything, and all of the online "help" things say that the IPod icon should appear under "Devices" but it's not, and because the IPod's frozen... What should I do???

My IPod nano (older version) is frozen, so I can't do anything, and all of the online "help" things say that the IPod icon should appear under "Devices" but it's not, and because the IPod's frozen... What should I do???
<What's the difference between a message and a question?>

Which older model iPod Nano do you have? iPod Models
Read the user manual for a solution - iPod Manuals
A question ends with a "?" mark and a message ends with a "." period.

I just upgraded to mountain lion. I am unable to use airplay mirroring through my apple tv. They are both on the same network. It says a airplay icon should appear in the menu bar but it isn't there. What am I missing here?

I just upgraded to mountain lion. I am unable to use airplay mirroring through my apple tv. They are both on the same network. It says a airplay icon should appear in the menu bar but it isn't there. What am I missing here?

http://www.apple.com/osx/specs/

Payments made to vendor against the PO should appear in PO

Hi
Thanks for the reply
is there is any possibliy so that i can see the vendor down payment and the other progreesive payments made to vendor. Also i want to link the payments made to vendor i.e what all payments is made to vendor aganist the PO should appear in PO in the same fashion as downpayment appears.
regards

Thanksfor reply
But if i am not doing the progressive payment thru downpayments but thru other trancation then how this will be shown.Another point of concern is that if i am doing the payments F-53 then will i can get the downpayment history from for a particular PO .This is required as finanace guy wants to know how much advance and progressive payment i have made to my vendor against particular PO .
Need your help and suggestion
regards

WHT amount not appearing in FBL1N report for Document type RE

Dear Friends,
While running FBL1N report for any vendor where TDS is applicable, the WHT amount is appearing for KR document type. But when it is RE document type the WHT amount is not appearing in the report. How can we resolve this? Any enhancement/any note to be applied?
Regards,
Ramkumar

Hi,
FBL1N is having the classic withholding tax field hence please don't refer the those fields.
please don't refer those fields.
Please review attached note 363309 for detailed explanation.
BSEG-QBSHB is designed to fill for the classic withholding tax. And
extended withholding tax information is stored exclusive in table
WITH_ITEM.
You can check in table BSEG for the fields and will find that system
do NOT update field BSEG-QBSHB.
In your line layout,you define a field BSEG-QBSHB. But actully the field
of vendor/customer line item is filled with zero from FI. Thus,it shows
zero in line item display.
And as note 363309 says,
"Remove the field which contains the withholding tax information
from your display variant.
If you want to display the withholding tax information, double-click on
the document number and subsequently choose 'Withholding tax'."
Regards
Madhu M
Edited by: M Madhu on Jan 18, 2012 9:13 AM

Text should appear both in chinese and english language in smartform-Urgen

Hi All,
In my requirement in smart form, the standard text and values to be printed should appear both in english and chinese language.
When my login language is EN(English), I cannot able to see the chinese text , but only the english text.
If login in Chinese language, I can able to see the both the Chinese and English text in print preview, even then in printout the chinese text is missing.
Please let me know what will be the problem.
What printer i can use to get both chinese and english text.
Thanks in advance
Saravana

Hi
See the attached 2 OSS notes for your problem
OSSNote:960341
Symptom
In some device types (e.g HPLJ4, HPLJ5) you experience non-uniform character spacing in the PDF document after the PDF conversion of SAPscript or Smart Forms documents, using HELVE or TIMES fonts. You want to know the reason.
Other terms
CONVERT_OTF, SAPscript, Smart Forms
Reason and Prerequisites
The problem is not due to an error in the PDF converter but due to the fact, that the printer font, underlying the device type (e.g. Univers or CG Times in PCL-5 device types), is not available for the PDF converter and is either not available in Adobe Reader. The PDF converter has to try to simulate the layout of the printer font by means of a font which is predefined in Adobe Reader. This is done by assigning the letter widths of the printer font to the font used in Adobe Reader.
The PDF file contains a table with letter widths, used by Adobe Reader in the output of text, for each used printer font (except PostScript fonts).
Example:
%Charwidth values from HP4300 HELVE 060 normal
/Widths
[ 278 333 500 633 633 1000 758 333 333 333 633...
Adobe reader converts this width table, by modifying the space between each character, so that the specified letter width (= space between the current and the next letter) is kept.
This 'Simulation' of printer fonts results in the sometimes visible irregular spaces in PDF.
The PDF converter always uses the Helvetica Adobe PostScript font for the display of HELVE and the Times Roman Adobe PostScript font for the display of TIMES. However, for these Adobe PostScript fonts, Adobe Reader often uses a Windows TrueType font, which differs slightly from the original PostScript font.
Solution
Workaround: Use the POST2 PostScript device type or the PDF1 PDF device type for the PDF conversion of documents in the Latin-1 character set. They both use the Adobe PostScript fonts Helvetica or Times Roman for the HELVE/TIMES printer fonts.
Header Data
Release Status: Released for Customer
Released on: 30.06.2006 12:44:06
Priority: Recommendations/additional info
Category: Consulting
Primary Component: BC-CCM-PRN Print and Output Management
Secondary Components: BC-SRV-SCR SAPscript
OSS Note: 776507
Symptom
Documents printed via SAPscript or SmartForms do not print with correct special characters, e.g. ### prints instead of Japanese or Russian characters. What to do?
Other terms
SAPscript, SmartForms, printing, device types, OTF
Reason and Prerequisites
Help required to choose proper fonts in a SAPscript or SmartForm
Solution
When using SAPscript or SmartForms to print (or email or fax) a form from a business application, many factors influence the outcome of the actual text within the form. All these factors must be checked in order to ensure a correct printout:
1) The language version of the form used to produce the printout.
Example: If you want to print a French invoice, you need to have a FR version of your SAPscript or SmartForms invoice form RVINVOICE01. And the application program must specify the corresponding language key (FR) when calling the SAPscript or SmartForms API.
2) The font selections specified in the form (possibly also in a SAPscript style or SmartStyle used in a form).
Example: In a SAPscript form or a SmartStyle you need to specify HELVE if you want to print German text in Helvetica (or similar) font. If you want to print Japanese text, HELVE is not a valid choice but you need to specify a Japanese font like JPMINCHO in your Japanese form.
3) The output character set of the device type
Every printer in transaction SPAD has a "device type" assigned. Device types used by the spooler for printing support only one single specific output character set. All text from the form has to be converted (using SAP's built-in character conversion mechanism) to this output character set.
A character set can typically support either a single language (e.g. Shift-JIS which supports only Japanese) or a set of languages (e.g. ISO 8859-1, which supports Western-European languages). It is possible that a given language (such as German) can be supported by several output character sets, e.g. you may use either ISO 8895-1 (Latin-1) or ISO 8859-2 (Latin-2) to represent German text. This is so because both character sets contain the special characters used in German.
Example: HPLJ4000 is a HP LaserJet device type supporting the ISO 8859-1 (Latin-1) character set. ISO 8859-1 can be used to represent e.g. Dutch, English, French, German, Spanish, Swedish but NOT Russian or Japanese.
As a consequence, it is ok to use HPLJ4000 to print English, German French etc. but not for Japanese or Russian.
4) The set of available printer fonts for a given device type
When formatting a document, SAPscript and SmartForms perform an automatic mapping of the font definitions in the form (e.g. "HELVE 14 point bold") and the available printer fonts of the device type. A replacement printer font is chosen, should the specified font selection not be available in the device type. Now this replacement can be problematic if a language-specific font, such as Chinese CNSONG, is specified in a form and it gets replaced by a font which does not support this language, e.g. COURIER.
To solve this problem, font families in SE73 have language attribute assigned, e.g. some fonts are characterized as being suitable only for certain languages. And when a replacement has to be chosen because the original font from the form is not available in the device type, a replacement font is chosen which has the same language attributes.
If no fonts for the language in question exist in the device type, the resulting font will not be able to print the special characters and you will see "wrong" output characters in the printout.
Note on SAPscript/SmartForms Print Preview:
The OTF Print Preview available in Windows GUI (e.g. from transaction SP01) will sometimes not show the "wrong" characters which appear on the final printout. Here is the reason: since the Print Preview runs in Windows environment, it will use Windows fonts to represent the actual printer fonts. A Windows font typically has more available characters (i.e. covers more character sets) than are actually available in a printer's resident font.
A typical example where the Print Preview will differ from the printout is here: if you have a Chinese PCL5 printer such as CNHPLJ4 and use the Western Latin font COURIER in your document, the print preview will show you Chinese characters if you (by accident) tried to format Chinese characters in COURIER font. This is because Windows will automatically choose a font that can output Chinese characters (which is actually not Courier). But when you print the job on an actual PCL5 printer with resident Western and Chinese fonts, the Courier font will not print any Chinese characters but Western special characters instead, because the printer's resident Courier font does not include Chinese characters.
Rule of thumb: all Asian device types (e.g. CNHPLJ4, JPHPLJ4, JPPOST, KPHPLJ4) support not only Asian fonts but also COURIER, HELVE and TIMES fonts. But these Latin fonts can only be used to print English text, not Chinese/Japanese/Korean characters.
Which fonts are suitable for a given language?
Language(s):            Font family to use in a form:
Latin-1 (Western Europe/Americas) *******
DE,EN,FR,ES,NL,SV       COURIER, HELVE, TIMES
                        (LETGOTH, LNPRINT)
Latin-2 (Central Europe) ****************
PL, CZ                  COURIER, HELVE, TIMES
ISO 8859-4 (Baltic) *********************
ET, LT, LV              COURIER, HELVE, TIMES
ISO 8859-5 (Cyrillic) *******************
BG, RU, SR, UK          COURCYR, HELVCYR, TIMECYR
ISO 8859-7 (Greek) **********************
EL                      COUR_I7, HELV_I7, TIME_I7
ISO 8859-8 (Hebrew) *********************
HE                      COURIER, HELVE, TIMES
ISO 8859-9 (Turkish) ********************
TR                      COURIER, HELVE, TIMES
Simplified Chinese **********************
ZH                      CNHEI, CNKAI, CNSONG
Japanese ********************************
JA                      JPMINCHO, DBMINCHO, DBGOTHIC
Korean **********************************
KP                      KPBATANG, KPDODUM, KPGULIM
                        KPGUNGSE, KPSAMMUL
Traditional Chinese *********************
ZF                      TWDPHEI, TWMING, TWSONG
Thai ************************************
TH                      THANGSAN, THDRAFT, THVIJIT
Arabic (Unicode systems only) ***********
AR                      ANDALE_J
Verify your output by examining the OTF data
When analysing printing problems of this type, be sure to check the OTF data which gets produced by SAPscript or SmartForms. OTF or "Output Text Format" is the intermediate page-description format generated from SAPscript or SmartForms. OTF will contain the final printer font names and character set/language identifiers which help to solve the problem. OTF will even name the form and the language of the form used to create the output.
The easiest way to do this is to create a spool request from your application, run transaction SP01, use menu
Goto->Display Requests->Settings
and choose
Display Mode: Raw
Now display your spool request. If this is a SAPscript or SmartForms spool request, you will see OTF data. Each line represents one OTF command, every command starts with a 2-character cmd identifier and possibly some cmd parameters follow.
Here is an excerpt from a sample OTF file where we highlight the most interesting commands:
//XHPLJ8000    0700 00000000001
IN04EALEXTEST_ZEBRA
IN05%PAGE1
OPDINA4 P 144 240 1683811906000010000100001
IN06%WINDOW2
MT0024401289
CP11000000E
FCHELVE 120 00109XSF100SF101110000067E X
UL +0000000000000
SW00067
CT00000000
ST0453037Dieses SF hat Stil ALEXTEST_ZEBRA mit
The 1st line with the // (Control) command reveals the device type usedto print: HPLJ8000
//XHPLJ8000    0700 00000000001
The 2nd line (IN = Info command) shows the name and (internal 1-char)language key of the form:
IN04EALEXTEST_ZEBRA
In this case it is the English (E = EN) SmartForm ALEXTEST_ZEBRA
The OP-line (OP = Open Page) gives the page format used in the form, it is DINA4 Portrait orientation:
OPDINA4 P 144 240 1683811906000010000100001
The CP (CodePage) cmd shows the SAP system codepage used to code the text and the active language. In our case it is codepage 1100 and language E = EN = English.
CP11000000E
Finally, the FC-cmd (Font Call) lists a printer font selected within SmartForms. Please note that every SmartForm has a designated default SmartStyle under "Form Attributes->Output Options". In addition, every text node can have a SmartStyle attached (which will override the definitions from the default style for the text). In our case the resulting printer font that was selected is HELVE 12.0 pt bold-off, italic-off.
FCHELVE   120 00109XSF100SF101110000067E X
Header Data
Release Status: Released for Customer
Released on: 22.08.2005 09:57:20
Priority: Recommendations/additional info
Category: Customizing
Primary Component: BC-CCM-PRN Print and Output Management
Secondary Components: BC-SRV-SCR SAPscript
BC-SRV-SSF Smart Forms
reward if useful
regards,
ANJI

Base Amount should not be more than PO net price

hi
Base Amount should not be more than PO net price , in MIGO if the Material is excisable excise tab will be populate i can able to change the base amount . i need the restriction Base Amount should not be more than PO net price , this requirement for purticarly for the dealar relegated tax codes . i am not maintain any conditions relegated BED ,ECESSand SECESS in the taxcode . i will eater the excise tab in MIGO or J1IEX Directly . please advise me how to restrict
@sakhi

if that is the case why are you proividing the Authorization for MIGO_GR transcation...........Restrict the MIGO transaction and try to give MB01 transaction .So that there will no discrepancy in PO to GR....

Amount not appearing in the PO history of me23

Hi,
For one of the PO,after doing 105,when I tried see value amount in PO history tab of me23(PO screen),it is showing only 0.00.
It is a project PO.Account assignment category 'P'. I want to know why this amount not appearing in PO history.
Any help to solve this issue,please...
With Regards,
Jaheer

Hi,
if the accounting doc is not generated then plz check the value update of material type
check code OMS2
here select the material type ur using then click on Quantity/value updating
tick for value update
Any one of the below mentioned case is yours, then it is quite possible that amount value will not be reflecting.
1. Does your PO contains non-valuated Materials ?
2. check you might have created the PO for Free-of-charge Items?
3. if it is CG PO and involves multiple account assignments, then Valuation occurs at Invoice level.

Amount should be split in to different accounts

Our client is selling Computers and it is accessories.
I have material with one valuation class , for this material there are three warranties.
1. Base Warranty
2. Extended warranty
3. Base & Extended warranty.
Case 1: if the material falls under "Base warranty" then it has to post in one GL account.(After making GR)
Case2: If the material falls under extended warranty , then it has to post another GL account..(After making GR)
Case3: If the material falls under both Base & Extended warranty , then the amount should split in to both accounts , based on Percentage. .(After making GR)
How can it be possible?
If any one know the solution, please inform me.
I request you , to forward , if you have any solutions for the above scenario.
Thanks in advance .
Kind Regards,
N.Chandrasekhar.

Chandrasekhar,
How do you identify the different types of warranties for the material in SAP?
You can definitely use the split valuation functionality where in you could create 3 different valuation types to represent your 3 types of warranty and then use 3 different valuation classes to link the same material to 3 different G/L accounts. For case 3, you will have to use a BADI or user exit during GR to split the amount based on your criteria.
If you are not aware of the split valuation functionality, you may wish to go through this nice explanation below.
http://www.sap123.com/showthread.php?t=29
Hope this helps.
H Narayan

Frieght should appear in both header and item levels

Hi SAP gurus,
while doing the Sales Order transaction(va01), frieght should appear in both header and item levels, how can we configure in SAP.
Thanks in advance.
Sathya........

Hi Sathya,
You can maintain the Fright condition type (KF00) in your pricing procedure and maintain the condition record for that as per your requirement, or you enter manually at Sales Oreder it will come at header and item level.
I hope it will solve your problem,
Regards,
Murali.

CST & VAT Amount should be seperated....

Hi,
In my report 1 column is Tax Amount.....I want that it should be seperated by CST Amount and VAT Amount...I means:---e.g.
Doc. No..................Tax Amount................CST Amount.............VAT Amount
1000001.....................8000.00......................8000.00.......................................
1000002.....................5000.00......................5000.00.......................................
1000003.....................7000.00........................................................7000.00
1000004.....................4000.00......................4000.00.......................................
Here i want that, from tax Amount...CST & VAT amount should be displayed seperate....
(look at doc. no. 1000003, here from tax Amount it goes to VAT Amount)
Please let me know what should be condition here......
Thanks...

Hi Prince
In classical output you can do something like this
WRITE : / 1 doc_num, 10 tax_amt, 20 cst, 30 vat.
So vat values would always be displayed after a particular length
Pushpraj

PO amount should appear Once

Similar Messages

Maybe you are looking for