PO Approval through email set up documets

Hi,
I want set up documents once we try approve the Requisition and PO documents for approval not
through notifications, but through email.
So the approvers will open the relevant information in their email and
approve the document through email. They would not want to go to Oracle
Purchasing and approve the document through notifications.
Thank's

Switch on the In bound Processing.
But this will affect all other workflow notifications also.
See below thread. There they have done opposite to your requirement.
Re: Workflow Email approvals
HTH

Similar Messages

  • Expense Report Approval Through Email

    Hi all,
    When approving Expense Reports through email, when the user clicks on Approve, a new mail is created with recipient of '[email protected]' and 'APPROVE' in the mail body.
    User must then click on Send to approve the notification.
    Is it possible to configuration these so that when user clicks on Approve in the original mail, that a notification is sent in the background rather than via a separate standalone approval email?
    Any pointers much appreciated.
    Regards
    Martyn

    rvenishetty,
    There won't be a fixed set of steps for such scenario. It will depend on the exact page, the requirements. but more or less, it should be achievable with the help of the personalization and extension. better go through the personalization guide. If you feel that personalization won't be enough, go for extension.
    --Shiv                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                       

  • Offline approval: Resend email on specific workflow

    Hi all.
    SRM 4.0
    We use item based approval and offline solution, where every SC is approved through emails only. Usually, when an approver claims that the email from the workflow/work item has not been sent to him, we go to SOST and find the mail, and sends it again. However, in some cases the email cannot be found in SOST, meaning that the work item has most likely never been sent before; although the workflow log claims that the work item is lying in the approver's inbox (SAP inbox of course). Is there a way to force the RSWUWFMLEC program that sends the emails to run on 1 particular work item? Or is it just not possible to make the workflow resend the email? Remember - the email is not in SOST, so it seems that RSWUWFMLEC has just skipped this work item to begin with, and apparently now it is too late...
    Looking forward to information!

    Hi again.
    Here is what I have in SWI6 for the SC:
    Current data for started workflow: Item-Based Approval 10043494 
    Steps in this process so far 
    Step name  Status  Result  Time stamp  Agent 
    Approval of SC of DKBODPRA Value: 5.233,00 DKK  Ready   08.07.2008 - 09:30:41  Information... 
    Information objects addressed so far 
    I cannot see where I can get that pop-up you mention? Can I find the relevant number within the workflow log itself?
    Got the number, trying to proceed.
    Edited by: Dennis Mogensen on Jul 11, 2008 12:21 PM

  • Approved payment proposal send to vendors through email

    Hi All,
    We want to send the payment advice to vendors via e-mail as soon as the payment proposal is approved.
    We have the workflow here, once the payment proposal has been created, it will go for the approval.
    the approver will approve the proposal if it is okay.
    so, once this proposal has been approved, the payment advice should send to corresponding vendors through email;
    Regards,
    Shwetha

    Hello,
    You can control whether a payment advice note is to be sent by e-mail via BTE interface 00002040.
    The Function Module Sample Process is SAMPLE_PROCESS_00002040 which you
    can find by using transaction BERP. You can use this Function Module as
    a reference for the BTE and find instructions for setting up the
    interface.
    Note 407827 and1033893 provide good hint on how to achieve your business needs. Furthermore, I'd suggest you to send payment advices after payment run and not after proposal run.
    REgards,
    REnan

  • Approval/Rejection of Access Request through email functionality not workin

    Hello Gurus,
    We have configured CUP with workflow and everything is working fine along with email notification triggers etc..
    In MSMP configuration , for task settings i have we see that there are various option and check boxes with options
    1)Approval by email
    2) Rejection by email !!
    Which i have ticked very happily but when i get a notification regarding approval . it is plain text e.g)
    Dear Approver,
    There are new workitem(s) in your work inbox . Please perform the necessary actions.
    Kind regards,
    Access Control Administrator
    Now i am wondering how can i get the approve & reject button in the email ??
    I suppose this functionality was available in GRC 5.3.
    Please correct me if i have understood this functionality wrong or something !!
    Else what settings have to be done to enable it ??
    Thanks in advance.
    Regards,
    Victor

    Hello Diego,
    Thank you for providing me a very good document.
    I checked it and i found that i had selected "default" templates for notification events
    END_OF_REQUEST & REQUEST_SUBMISSION.
    But when i went on to one more template  ID  of "GRAC_AR_APP_BY_EMAIL" i only found that i could select
    recipients (Agent Names)
    Current Approvers
    Manager Notifications
    Other Approvers
    Requester
    User
    I could not find a way through which i could select the "Custom" Agents i have created whose "Agent Purpose" was "APPROVE"
    If i am not wrong , should i add those Custom agents under step three (Maintain Agents) & assign them Agent purpose as "Notification" only then will i be able to see them ??
    Please correct me if i am wrong !!
    Thanks in advance.
    Regards,
    Victor

  • Purchase Order Approval through Mobile Phone / BlackBerry

    Dear fellows i am interested in Purchase Order Approval through Mobile Phone / BlackBerry. I have seen MSCA Mobile Supply Chain Application Guide but that is for telnet only devices and specific to supply chain. What are setup requirements to make PO approve though "Web App" or "Mobile App" as show in below image URL. We need to work it primarly on BlackBerry.
    http://www.exforsys.com/images/OracleApps/t10_files/image010.gif
    That will require logging in to EBS through Mobile and Making EBS available on Public IP !?! If this all fuss needs to be done then is there some Notification Alert type mechanism which sends email, but here a user could also reply that email with keywords to Approve or Reject that PO !?!
    Thank you.

    Dear Hussein, ur links are iPhone specific and also BPEL Connector specific ("Oracle Buisness Approvals for Managers" BPEL Connector). The links for Blackberry assume that i am atleast already getting emails on blackberry through EBS. Our env is through MS Exchange Server. Where as i believe from ur suggected docs that the EBS needs to have its own direct setup with blackberry
    In our current env we are using Oracle Alerts to Just send an email to user that PO for approval is waiting. We are NOT using "Oracle WorkFlow Notification Mailer". For blackberry will we be locked to use Workflow Mailer (i see patch 6802716 pre req also)!?! or we can still use simple Alerts!?!
    following thread says type "approve" in reply whereas metalink guides tell a URL to click in email. will it be a ...
    href="mailto:[email protected]?body=approve"
    type URL!?!
    http://oracle.ittoolbox.com/groups/technical-functional/oracle-apps-l/po-approval-through-mail-3077383
    ===============================================================
    There are a couple of steps that need to be complete before this will work.
    Pre- Req's
    1. Associate all apps users / approvers with email addresses
    2. sync apps users with workflow
    3. Check workflow users to make sure email is set to HTML.
    4. Configure and enable workflow mailer. You will need configuration information for the email service being used and a mailbox on the email service.
    5. Send a test message from workflow mailer to an apps user.
    If this is successful, then email based approval will work. If the user tries to approve using a smart phone (blackberry, etc.) they will have to hit reply and type approve as the message for approval to work.
    this guy also points to this idea.
    http://secure.meetingexpectations.com/oaug/eLearning/elSchedule.aspx?DayOfWeek=3&mtd=8/1/2007
    ===============================================================
    August 21, 2007
    Session 2
    August 21, 2007 12:00 PM U.S. Eastern (New York) Time
    Approving Requisitions/PO’s in Oracle E-Business Using Blackberry Devices
    Presentation of a solution using Blackberry Devices to approve requisitions and purchase orders in Oracle E-Business Suite. This solution required creating a text message to send to Blackberry users, and modifying the Workflow Java Mailer to be able to correctly read the default messages being sent back from blackberry devices. In addition, profile options were created that allowed simple key strokes to be translated into Approve or Reject options recognized by Oracle Workflow Java Mailer.
    Session Closed
    Presenter, Company: Bolton Carroll, The Revere Group
    this one too...
    =========
    http://oracle.ittoolbox.com/groups/technical-functional/oracle-apps-l/iexpense-approval-via-blackberry-and-iphones-3047841
    This one is DIFFERENT!
    METALINK: List Of Certified Devices For Mobile Field Services and Field Service Wireless [ID 793392.1]
    ========================================================
    Also, recently we have developed something called 'MiniWireless Server', which is a light weight server replacement of Oracle Wireless Server and can be run along with Mobile Server of Oracle Lite. Please refer Metalink note 758680.1 for more details. You may want to communicate this to customer if they are planning for fresh implementation.

  • The KitKat upgrade has been a disaster. home wireless is no longer recognized, even going through the set-up process.  It does not connect to the car through Bluetooth seamlessly--I have to add my phone as a new device each time I get in the car.  In atte

    My home wireless is no longer recognized, even going through the set-up process.  It does not connect to the car through Bluetooth seamlessly--I have to add my phone as a new device each time I get in the car.  In attempting to solve these problems I have gone to settings-phone-upgrade and it states that the upgrade is available-select to continue-(which I do)- it checks -please wait and it then states that update not available - try later.

    Maybe not too late to help you.
    For specifically fixing the Bluetooth, un-pair your phone with the car, and go through the process of repairing the two.
    In general, the KK update requires many of us (different phones) to perform a Factory Data Reset after we back up our personal content (pictures, music, movies, or other downloaded files) to a PC or MAC. This will result in you having to do a bit of work to setup icons for the programs you use, and maybe putting in the specifics again for email accounts and other specialized apps. So if you are going to do this sort of thing... copy important information/settings down on paper.
    HTH.

  • I am having difficulty including text with iPhotos I want to share through email.  I get a red exclamation mark along with a statement stating that the text doesn't fit into the designated text area.  This is so frustrating.

    I am having difficulty including text with iPhotos I want to share through email.  I get a red exclamation mark along with a statement stating that the text doesn't fit into the designated text area.  This is so frustrating. Before iLire11 I was easily able to share photos with email messages.  Arghhhh!

    In the iPhoto preferences you can set Apple Mail as your e-mail client and then it will work exactly as before
    LN

  • Vendor payment advice through email

    Hi gurus
    i want to send vendor payment advice through email , i am using the form F110_IN_AVIS  for payment advice
    and from the report  RFFOAT_P i want to send the email , is any configuration needed to send the email , or just i have to give selection detials properly and it will work ,
    regards
    m.a

    Hi Afzal,
    For sending Payment advice by E-Mail, "You need to copy SAMPLE_PROCESS_00002040 and adjust it to write code as per your requirement. This BTE runs for each payment advice note to be sent and in the module, it is mentioned 1=print, 2 = Fax and I=mail, so you can set your priority, that if an E-Mail address is maintained in the vendor master, send mail or if no E-mail address is maintained send Fax, and if both are not possible shoot a Print.
    From Configuration side, you need to maintain the Z copy of SAMPLE_PROCESS_00002040 in FIBF transaction under the Process module of a customer without country or application indicator.    
    SAP Note 836169 - Consulting: Payment advice notes by email or fax.   
    Regards,
    SAPFICO

  • How to send pdf files from local dir through emails attachments

    I have some pdf documents in some directory, I want to send those pdf's as an attachment throu emails to the concerned person.
    Please let me know how to attach the files and send through email.
    Thanks.

    You are using Forms 4.5, which is a client/server configuration. When you create a pdf file, the file has to be written to a directory that is accessible from your PC. D:\ is acessible, /tmp/ not (that is a directory on some Unix server). If you want to write files to a Unix server, you have to set up Samba and map a drive from your PC to he Unix directory.
    Since you are creating multiple pdf files, you will have to wait until all reports are finished and mail them afterwards. You can create a batch script to mail the files.

  • Business Catalyst Email Set-Up

    Hello all,
    I apologize in advance as I am new to setting this sort of thing up but I just launch my very first Muse site and am running into the issue of getting my clients emails set-up properly. For instance, where do I go about setting up the new individual addresses so that their new domain name is now included; [email protected]? Will these be linked or forwarded on to an existing external mail client? I discovered the 'Add New MX Record (mail) but don't know where to go about finding or what info I need to input for the 'Mail Server' field info? It doesn't seem like doing this would link anything up to any any existing persons email account? Am I going about this all wrong or over-thinking this?
    Any help or simple instructions for a 'newbie' would be GREATLY appreciated.
    Thanks for your time!
    Matt

    Hi Matt,
    If you are under a "webBasic" plan you'll need to host your email externally to Muse/BC.  So under site settings -> manage domain name you'll add your external email MX details. 
    Please see the external email set-up article for more details. - http://helpx.adobe.com/business-catalyst/topics.html#dynamicpod_reference
    However if you have a higher plan "webBasic+ or above) then you can use email service through Muse/BC.  Basically you'll just need to go to site settings -> manage domain and select mail service with us.  Afterwards you'll begin creating mail accounts under site settings -> email accounts. 
    If needing further assistance please reach our direct support to help review your setup if required.  - http://helpx.adobe.com/business-catalyst.html
    Kind regards,
    -Sidney

  • Problem in sending data through email in brodcasting

    HI All
    i am trying to send the data through email in the broadcasting. but as i execute the broadcasting the message comes
    "Online processing is not possible for user 1"
    further its is saying
    "You want to execute a broadcast setting online. Processing this setting requires switching to another user (for example, with the user-specific precalculation of Web templates for a user other than your user). This is only possible in background processing."
    but i dont know how to login as seperate user. as i have to send the data through my login and not someone else.
    Hope i am clear.
    Please help me on this its very urgent
    Thanks

    The solution to this problem is that:-
    1. this is not an error
    2. it gives the warning beacuse we cannot execute the broadcast setting at that moment (with different users in reciepient list) i.e. we have to schedule the broadcast settings.
    Thanks
    Prat

  • I do not receive notifications for my email account even though the email setting in Notifications is turned on. How can I fix this?

    In iOS 5 I do not receive notifications for my email account even though  the email setting in Notifications is turned on. I do receive other notifications. Does anyone have any suggestion on what is wrong or how I should correct it? Thanks.

    Hey M0904,
    I found the following information regarding troubleshooting notifications, I'd run through them and see if they resolve the issue:
    iOS: Understanding Notifications
    http://support.apple.com/kb/ht3576
    Troubleshooting notifications
    Push notifications require an active Wi-Fi or cellular connection. If you are not receiving notifications for a specific app, try these steps:
    Verify that the app supports notifications.
    After installing an app or restoring a backup to a different iOS device, open the app at least once to begin receiving notifications.
    If the app requires entering or logging in to an account, you will need to do this before receiving notifications.
    Check Settings > Notifications to ensure that the app is configured for notifications.
    If notifications do not appear only in the Notification Center, verify that the Notification Center setting for the app is enabled.
    If you are still unable to receive notifications and you are using a Wi-Fi connection, verify that the network or firewall is not blocking access to port 5223.
    Have a good one,
    David

  • Sales Order Confirmation through Email

    Dear Friends,
    Can i ask you to give me a quick idea on what need to be done to establish the functionality to send the order confirmation through emails.
    Thanks in advance.
    Ravi

    Once you made sure that the output type definition is all set with all relevant data and ABAP work, go to the condition record of the same output. Maintain the mediums as 5 -- Extrenal Send and Date / Time as 4- send immediately when saving the order. Then go to the details of the record and maintain the relevant communication strategy. Save the record. This should trigger the mail automatically when you save the order.
    If you also want to print with the same output type, then you need to go back to order VA02 , repeat output and change the medium to 1.
    If you want to automatically print and also mail on single save / then you need to tweak the output program to trigger print and mail both at the same instance. This is possible by the output program. Then you need to keep the medium as 1.
    Hope this helps.
    Sai

  • Purchase Order Approval through Mobile Phone

    Hi,
    Our EBS environment is with version 11.5.10.2 and database 11gR2.
    We got a requirement of configuring Purchase Order Approval through Mobile Phone / BlackBerry
    Could anyone send few docs related to this.
    Regards,
    Mahesh

    Please see these docs/links.
    Is It Possible To Approve Purchase Orders , Requisitions Via Blackberry, Smart Phone, or PDA? [ID 338874.1]
    Unable to Approve Purchase Orders via Blackberry [ID 444122.1]
    Blackberry Displays the Emails with HTML Tags in the Email Body [ID 802225.1]
    Troubleshooting Inbound Email Notifications [ID 1184846.1]
    Email Notification Approvals Are Discarded [ID 471423.1]
    Missing Html Buttons To Approve, Foward, Reject In Email Notification [ID 395986.1]
    Using Mobile Devices with Oracle E-Business Suite
    http://blogs.oracle.com/stevenChan/entry/mobile_devices_ebs
    Hands-On with Oracle's iPhone Apps
    http://blogs.oracle.com/stevenChan/entry/handson_with_oracles_iphone_apps
    Thanks,
    Hussein

Maybe you are looking for