PO can be created even if PR is not released

Hi,
I am facing an issues as follows after upgrade to ECC.60 from 4.6C
After creating a PR though it is picking a correct release strategy & PR is not released I can create PO with reference to PR.
But if I try to create PR which is created before upgrade which is not released, I am getting an Error message (message no 06,055) which us as per requirement.
What we found is on PR create/change/display transaction on Item detail screen & on Status tab new field is added in ECC 6.0.We are getting different status for PR created before upgrade & after upgrade as follows.
1) For PR created before upgrade we are getting status as 'In release'.That means system will not allow me to create PO with reference to this PR.
2) Where as for PR after upgrade we are getting status as :Active".That means system will allow me to create PO with reference to this PR.
Please tell me why there is a difference in status for both PR even though both PR are not released.Also how to make sure that whenever new PR is created & is subjected to release strategy the status will be picked up as "In release".
Note:Status can be seen on PR document>Item Details Screen>Status Tab.
Your help is highly appriciated.
Thanks & Regards,
Shyam

done.

Similar Messages

Applying Sticky Error in saving to DB: Can't create sticky because resource is not allocated.

When trying to setup Stick http-cookies and when I deploy i'm getting the following error.
Error in saving to DB: Can't create sticky because resource is not allocated.

just a wild shot. you sure have resource class with sticky resources created.

HT204088 I can't create an apple ID for not using credit card. How can i create an apple ID with no credit cards ? Thank you.

I read the supporting article. But those pictures were old. Also the format had changed. I can't create an Apple ID with no credit cards? I got no credit cards. I am just a secondary student and how can I have a credit card?

Follow the instructions on this page exactly : http://support.apple.com/kb/HT2534 i.e. select a free app and click on 'create Apple ID' when 'buying' it (it worked for me yesterday).

How can I create a object for a note?

Hi experts,
I need to apply the note 501905 but when I try in the SNOTE transacction I receive this error:
Object REPS Z_MRM_DELETE_PP does not exist; create it
Diagnosis
The SAP Note that you want to implement contains changes to an object that does not yet exist in your system.
SAP Notes contain only changes to objects that already exist. This means that the the system cannot automatically create new objects during the implementation of this SAP Note.
Procedure
1. Cancel the SAP Note implementationl.
2. Create an empty object REPS Z_MRM_DELETE_PP with the corresponding object editor.
3. Restart the SAP Note implementation.
How can I create that Object??
Thanks for the help!

Hi Carlos,
It says that you have to create a new program with a name Z_MRM_DELETE_PP.
Once you create and activate the program you can execute the SAP Note.
All this processure will be written in the SAP Note.
Please Go through the Note using below:
Step1: Use T.code SNOTE.
Step2: Use menu GOTO --> NOTE BROWSER. Provide the Note no and EXECUTE.
Step3: Double click on the displayed line.
Here you will get the information to do before implementing the note.
Go through all the documentation, and once you did all the development given in the note then you can implement the note.
Regards,
Sreekanth.

Cannot create STO due to Material Not released

Hi experts,
I have a query here.
A part number has block code BL (Blocked) in MM in MRP1 & Costing views. Because of which we cannot create Intercompany Stock Transport Orders.
However it allows us to create normal PO's for the same part to the vendors. The material status of this block code BL has only Inventory Mgmnt blocked with "B" whereas rest of the settings
Material 82001 cannot be taken from plant 1001 due to status "Not Released"
Message no. ME125
System Response
Procedure (system administrator)
Check the material status in Customizing:
Define material status
Could you let me know why it behaves differently in normal PO to that of Intercompany Stock Transport Orders?
Regards,
Pri

I dont know the reason, but probably it is to to avoid potential business trouble, to inform requesters at the earliest time that the supplying plant cannot delivery what you request.
Assume you would create STO today for a delivery in November.
You would be lucky because you succefully created the STO.
In November someone in the sending plant would starf processing the goods issue to you, would then realize that it is not possible, would then inform you about that.
you would get in trouble with your customer, as you cannot meet the promised delivery date.
Wouldn't you ask him why he did not tell you that in August already?
But the sending plant has no chance to know this prior to the processing (except they would lookup manually everytime the material master status when you send an order).
So the easisest way to let you know that it is not possible to move material in the sending plant, is thru the message at order creation.
As I said, it is just my assumption. You may ask SAP for the correct answer. Maybe another one here knows it.
Can it be that you do not use delivery processing for this STOs?

How can I create a checklist in Pages (not Numbers) ?

Hello all,
Just curious if ANYONE out there has figured out how to implement a checkable checklist in Pages. I am familiar with the Checklist template in Numbers, but it is not very pretty, for lack of a better word. I need to create a stylish checklist in Pages that I can email out to employees, they can fill out, and send back. Any suggestions?
(I am also familiar with the check boxes in the Image Bullets section of Inspector, but it is too complicated for some of my less tech-savvy employees to go change the bullet for each line they need to check off - not to mention a hassle. The intuitive thing would be for them to be able to simply click on the empty box, at which point a check would appear. Please help.)
Thank you!
Jen

The clean soluce is to build your own template matching your taste in Numbers.
Yvan KOENIG (VALLAURIS, France) samedi 23 avril 2011 11:06:02

How can I create a redirect - on page not found?

I have asked this before but things have changed since....
I am editing a site on a NON-LINUX server, one which can use VB code...
The problem is that there are a lot of obsolete pages and I want to remove them
I want to put a sitewide function in place so that if anyone types in an obsolete page through the whole site then it redirects to a single page with an apology and a link to the home page of the site...
Someone said it could be done on a linux server, but this is not one of those... so please could someone explain IF and HOW it could be achieved on another server...
Thank you
Terry

What you are asking for sounds like a 404 error page. That's easy. In the IIS manager navigate to the site you are managing and change the path of the 404 error page for that site to one you have created. If you are on a shared host you should be able to edit the web.config file like:
<configuration>
<system.web>
    <customErrors defaultRedirect=”http://mysite.com/errors/Error.aspx” mode=”RemoteOnly”>
       <error redirect=”http://mysite.com/errors/404.aspx” statusCode=”404″ />
    </customErrors>
</system.web>
</configuration>

Can Flash create dashed line with blunt not rounded dashes ?

Hi,
using Flash8
I can select line tool and dashed line in properties and draw a dashed line and get a line of sausages. How do I get a line of dashes without rounded ends to each dash ?
Line option has end caps option with None (gives straight or blunt tip to line, round gives rounded tip .
Draw a line with None and its got blunt ends, select it and choose dashed line option and it gets round ends to the dashes, the end cap option is greyed out !
Are dashed lines with blunt dashes now possible again with CS4, a forum poster also found that CS3 no longer gave blunt dashes ?
Why do I ask:-
I am trying to bring a map into Flash8 from Illustrator (Illus version 10 as it allows blunt tip lines to remain blunt it was said on the forum)... which has blunt ends to roads and has blunt type dashed lines. The roads remain blunt..GOOD !..but the dashed lines become what looks like a solid line. BAD !
I do a right click - break apart, then double click one of those now solid lines that should be dashed, and I am able to select a portion of the line, it is no longer a continual line as drawn in Illustrator. Properties shows it as solid line. Flash8 obviously having a problem with supporting Illustrator 10 dashed line then !
Select dashed in properties box and I get a portion of the line as sausage dashes, but working my way along the line doing each bit sees a far from correct dashed line result as sausages dont start stop evenly as each line is a separate entity and ignores the previous line.
Looks like I shall have to try and draw the line as one long line again in flash but unless I can give it blunt dashes when done, there is no point even trying that method, hence my question.
Would the latest Illustrator and Flash versions (CS4) allow blunt type dashed lines to appear in Flash ?
This is crucial for bringing maps into Flash.
Envirographics

I noticed one problem with my solution.
If you look, very carefully, at the end of the stream, it's flat. Not rounded like it should be. After a bit of trial and error, I tried a different brush:
Note that, in addition to the rounded rectangle (done with the new corner controls in the latest version of Illustrator CC that just came out) and the three circles, there is also a rectangle, with no stroke and no fill, to provide a space at the end of the three dots. Here is the result:

How can I create a template that does not have automatic formatting but my own?

I have just switch to a Mac from a PC and am having a terrible time with pages. All I want to do is create my own template that has NO AUTOMATIC FORMATTING so I can do my own.
There is nothing in the HELP sections on how to delete the automatic formatting. I do not want to use any of their Outline Templates just make up my own.
I would be so so grateful if someone could help me with this. I took a one-on-one and his idea of how to get rid of formatting in my own template DID NOT WORK!
Thanks, Deborah

Deborah
Hard to see your problem, and if there is something THAT DOES NOT WORK! it would obviously be useful to know WHAT that is and WHY you believe it does not work, so we can ACTUALLY RECOMMEND A SOLUTION.
Just select any text and change it to whatever you want using the toolbar and/or the Text inspector.
The Outlines are just a view of your text, in a form that lets you easily organise and move it around.
Menu > View > Show Styles Drawer
Reveals whatever style has been applied to a heading or text and you can update or create new styles by clicking on the small triangle next to it > Redefine style from selection
When you are finished just save it as a Template.
Peter

Message. Can't create a new account: Do Not Localize

I try to create a new account. Select "Other message account..."
Each attempt ends with the message << Do Not Localize >>.
And that's it.
My accounts preferences dialogue. Right side is empty
3. Can't fill the fields. After pressing "Set Up" button, the contents of the field disappears:
It's definitely Mac OS, not a Windows?

I really don't understand your use of the word "image" in this context. Especially your statement "there is already (an admin account) in the image". Can you clarify?

How can you create monthly items by day not date?

(This question has been posed in the past, but I'm just checking that there aren't any recent developments that anyone is aware of).
On my old Palm I used to be able to set up events monthly by day, e.g. every 3rd Thursday; I could even distinguish e.g. between last Wed of the month and every 4th Wed or every 5th Wed. Is this possible on calendar iPhone 3GS? I can't find how - it only seems possible to have monthly events by date (which I'm guessing in most people's lives is not very usual way of organising yourself).

Grumble. Yes, I lament that Palm calendar (and all its personal info management stuff) remains superior to iPhone. I've finally made the switch from Palm Treo to iPhone. Treo was better in PIM and was really still better in Apps in my field, medicine.
I wonder if the solution is to use another calendar management system like Google Calendar and sync the events into one's iPhone? I'm trying to do just that, although I must say that Google Calendar also does not have the breadth of calendar entry choices (like every other week or every 3rd Thursday) that I need. So I'm still looking.
If you solve this issue, be sure to post here so I learn of it! Thanks.
-- Josh

Can I create a local VIP? (not cloud synced)

I am posting this again because I thought of a better way of appoaching it.
Is it possible to have local (not cloud synced) VIP lists in the mail app? For example, my wife and I have on our iPhones cloud notes as well as local notes.
Thus her screen is not cluttered with my notes, and vice-versa.
For a simlar reason, I do not want the VIP list on my Mac, but I want it on our iPhones. Problem is that the VIP list syncs on the cloud. So, is there any way to create local VIP lists (only on the device)?
Thanks in advance

Thanks.
I said "solved" because you provided full answer. Unfortunately negative
Yes, if I turn the contacts off on my phone I can create a local list. I was hoping when I turn cloud contacts on the VIP list will stay local, not sync to the cloud. Unfortunately, that's not the case.
(By comparison, notes behave better. Say you have cloud notes on and no local notes. To create a first local note, you must turn the cloud notes off, there is no other way. Then create a local note. Turn cloud notes back one, the note you created stays local. Then you can keep adding local or cloud notes as you wish.)

APEX - Can't "Create" table. Get "Page Not Found Error"

I am trying to create a table with Oracle's APEX (at apex.oracle.com). When I run through the wizard and final process asks me to hit "create", the frame should state "table created", but instead it says Page Not Found. I have tried restarting the browser and also moved to another computer to see if it was a settings issue, but still receive this. I have emailed Oracle about it, but have not heard back, so thought I'd try here.
Thanks for any help in Advance.

My first name is Tyler
I sent my question to [email protected]
My email address is [email protected], I used this when contacting oracle, I also contacted with [email protected]
I tried creating the table through the wizard with just two columns, 1 number column and 1 varchar2() field. I did not create a pk or any constraints, to see if I could just get a bare minimum table created. Unsuccessfully.
I tried using the create DDL script in the SQL command window in APEX, this also was unsuccessfull. It seems to hang for a couple of minutes, I assumed it was just taking a bit to execute the DDL. But when it "unhangs", the status window below says it's still "executing sql statment", but it does not do anything after that, it stays there.
I went and checked if by chance the table had been created, but it hadn't.
Thanks,
Tyler

Can I create a "floating" toolbar, or customize any of the floating palettes?

I don't want the toolbar visible because I need it for almost* nothing and I can't accept even a little compromise to the visible length of my writing workspace. So I hide toolbars, formatting bars, rulers, etc., and use key commands instead whereever possible.
But without the toolbar visible, I can't create tables easily--there's not even a key command. The inspector can only edit tables already created.

The Insert Menu oddly enough inserts stuff, all sorts of stuff.
When I start using a new program I have a good look around, which is well rewarded in Pages because it has mostly sensible names, well organised from the large down to the smallest details working left to right in the Menus and Inspectors.
The View menu also does what it says and the keyboard shortcuts are (mostly) next to the menu items.
If a menu item like Table does not have a keyboard shortcut you can give it one in:
Menu > Apple > System Preferences… > Keyboard > Keyboard Shortcuts
Peter

Can we create a report painter report which shows the details of CC/CE/IO?

Hi,
I am trying to create a report painter report which shows the details of cost elements,cost centers and internal orders in a single section.I am able to create reports with 2 characteristics (like CC/CE or IO/CE etc.) but not with 3 characteristics (CE/CC/IO) which is my case.I am trying to get data something like below.Is this even possible using report painter?I will appreciate if any one could suggest how to do this.
CE          CC                        IO                        Amt
600000 8190001100           1100001                $1000
                                          1100002                $2000
                                          1100003                $3000
                                                                      $4000
620001 8190001101           1100004                $6000
                                          1200001                $2500
. . . . . . . .and so on
Thanks,
Saurabh.

>
But when i am using the same synonym in crystal report design, my report is working fine.. but the same synonym is available as invalid in database..
>
What does 'my report is working fine' mean? Are you saying that if you rerun the query it retrieves fresh data from the database?
What does 'same synonym is available as invalide in database' mean? How are you determining this.
Synonyms can be created for objects that do not yet exist.
create synonym q for table_does_not_exist
select * from user_objects where object_name = 'Q'
SYNONYM_NAME,TABLE_OWNER,TABLE_NAME,DB_LINK
Q,SCOTT,TABLE_DOES_NOT_EXIST,

PO can be created even if PR is not released

Similar Messages

Maybe you are looking for