PO can not be created due of amount value approved in related PR

Hello Gurus,
My client would like to set an error message while creating a PO related to a PR when the net price item differs in more than 10% from the value released in the PR related. All the PR are subject to release strategies with total amount as a chareacterisitc. Is this possible to set? Could please kindly provide me the path or any clue on how to do this?
Currently when a PO is created in relation to a PR system allows to change the net price without restrictions.
Please advice.
Thanks

I assume you do not work with PO approvals?
Normally when you create PR, system picks Price frm the material master you can try to control PO price maintain Tolerate Key "PE" for Cocode here.
SPRO -> MM -> Purchasing -> Purchase order -> Set Tolerance Limits for Price Variance
This will check the PO price VS the Material Master valuation Price (this will not be useful if the PR price has been manually changed )
But if a check against PR Value specifically is reqd. , In suchcase, there is no standard setting/config with which you can have system issue an error when the PO value exceeds the PR amount by a certain %.
The ME_PROCESS_PO_CUST BADI could be used, where you enter this validation Logic.

Similar Messages

I can not sync ipod due to 6gb of 'other', how do I get rid of this?

I can not sync ipod due to 6gb of 'other', how do i get rid of this?

Hello drumsdonkey,
Thanks for the question. The following article outlines issues with free space, capacity, and a large amount of "other" space. While it refers to iOS devices, most steps are applicable for your situation as well:
iOS: 'Not enough free space' alert when trying to sync
http://support.apple.com/kb/ts1503
One symptom of this issue will be displayed in iTunes where the Capacity indicator for the iOS device will report a large amount of "Other" disk usage for the device. To resolve this issue:
- Turn off the music or photo sync option in iTunes for the device.
- Click Apply to sync the changes to the device.
- Turn the music and photo sync options for the device on again.
- Click Apply again to try to sync the device to iTunes.
Thanks,
Matt M.

Output message can not be created in a PO

Hi to you all,
Output message can not be created in a PO for a customer. During my tests, the yellow output message was created automatically after I have saved the PO.
I checked ME9F and the table NAST, there is no entry for the PO of the customer. This happens arbitrarily.
Do you know how and why this can happen? Is it a program error or something else?
Thanks.
Esra

Hi Esra,
if I do understand you correctly, when creating the PO the system always finds a message to be created ("yellow" message). But arbitrarily the message cannot be generated in ME9F, correct?
In my view, if the message is always determined correctly in the PO there cannot be any trouble concerning condition records, the error has to occur later in the process.
Are there any error messages in the processing protocol of a message that cannot be created? What happens if you set the transmission time-spot to 4 (immediatelly)?
Just my 2 cents
Alicia

I can not open Firefox due to a virus. Can I un-install and then re-install Firefox and save my original setup and favorites

I can not open Firefox due to a virus.
When trying to open Firefox, the program directed the computer to shut down, and prevented me from going into Safe mode.
The virus only affected Firefox and rebooting in Safe.
The virus has been scrubbed, but I get the crash report every time I try to open Firefox. Can I install a new version of Firefox and still keep my bookmarks/ How can I rescue my bookmarks.
I am posting this from another computer location.

I used to have a slightly similar problem. Not the Virus problem, but the re-install of Firefox. The solution for this in the future would be for you to install and use FEBE Firefox Environment Backup Extension so you can fully back-up your settings, and other Addons, and Themes etc. that were within your FEBE backed up profile, so you can do the re-install of Firefox and then restore your saved profile that encompasses all of or most of what you presently don't want to loose. You could still do a FULL PROFILE FEBE, and re-install Firefox, and do a FULL PROFILE RESTORE, and if you might no longer have a virus problem after the restore. If so, your in good shape. I would find and run a good quality Anti-Virus scan, and if you wish to try to catch what you might have missed with the new scan I also suggest from www.IOBit.com that you add 2 programs that look to be better at catching problems than most other scan and repair utilities. The programs I suggest you add are called Advanced System Care - presently is version 5, and IOBit Malware Fighter, and one other. Their super powerful Smart Defrag that is faster than most Defrag programs and their is only one other Defrag program that comes close to it's power, and that is Diskepper, and you get Smart Defrag for free, and it's better, and faster than the others in my opinion. ASC Advanced System Care will clean your system and make it run faster specially if you have noticed it is slowing down for one reason or another , and it will do this with less resources than the other programs that you may already be using. The only thing they lack at present is an Anti-Virus portion which would add much more value to the already super programs. Good Luck. Let me know what you think after trying the noted programs. You should be very satisfied of the results.

HT201210 What To Do When You Restore Your 1st Gen. iPod And iTunes Says It Can Not Be Done Due Too An Unknown Error (1)

What To Do When You Restore Your 1st Gen. iPod And iTunes Says It Can Not Be Done Due Too An Unknown Error (1)

ERROR (1)
- Place the iPod in DFU mode and then restore
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- Try on another computer
- Try another cable
- Also, confirm your security software and settings are allowing communication between your device and update servers.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

Business Partner can not was created in a hire

Hi, Good night.
I have the following issue. I am check an employees that was hired with earlier date to the current date and not generated Bussiness partner. I understant that the system not create the business partner when the employees are hire to future date.
However i did the hire in the client of test and the system if create the BP. The question is:
What are the reasons for which a Business Partner can not be created in a hire, in the role of employee?
Regards
sanew2

Hello,
Please check if infotype 6 (addresses) is maintained for the employee. If not maintain a record for address and try.
Also, what are the infotypes that you create for an employee during hire?
Br,
Remya.

Question!hi!i try to install mac os x lion from 10.6.8. the system apprear the error message, the recover system can not be created . how should I do?

question!hi！i try to install mac os x lion from 10.6.8. the system apprear the error message, the recover system can not be created . how should I do?

Peruse the hits from a google search for recovery system can't be created site:apple.com

.xlsm Can't exit design mode because Control 'Command Button 3' can not be created

I have several Windows 7 Enterprise machines that cannot open one .xlsm file properly. When it opens, it is opening in Design mode rather than as a spreadsheet with macros. My users are getting the error "Can't exit design mode because Control
'Command Button 3' can not be created". All our machines have Office 2010 ProPlus, but this file will only open on the XP PC's that have yet to be upgraded. Any ideas?

Hi,
How do you create the button in Excel 2010? Just insert the control manually or insert it using a macro? This issue may be caused by the controls aren't instantiated before you can exit design mode.
Please try the method:
Code can only run after all controls are instantiated and properly connected. Make sure every file needed for the control is available before trying again.
Quote from:
http://msdn.microsoft.com/en-us/library/office/gg251344(v=office.14).aspx
Regards,
George Zhao
TechNet Community Support

Instance of javafx.collections.FXCollections can not be create by FXML load

<ListView>
<items>
<FXCollections fx:factory="observableArrayList">
<String fx:value="One"/>
<String fx:value="Two"/>
<String fx:value="Three"/>
<String fx:value="Four"/>
<String fx:value="Five"/>
</FXCollections>
</items>
</ListView>
why the netBeans 7.3beta2 say "Instance of javafx.collections.FXCollections can not be create by FXML loader"?

Hi,
PLS-00201 : identifier 'v$INSTANCE' must be declared. Please note that, this package having a procedure that is loading a text files rows to table. Its using UTL_FILE package.
And directories are used to load the data. I created the directories in the TEST database and create the physical directory in the TEST database host machine. 1. when issuue was raised from pl/sql - have you check the code ?
2. Have you tested code independently - instead of executing from job. ?
3. Forget about production system for a while, try to check the pre-requisites required for the things to run. ?
4. what is the pacakge code dependent on v$instance error - have you checked across ?
5. Have you tried to debug the code or not ?
- Pavan Kumar N

Stock can not be create

Hi friends
I am trying to create stock using /nmb1c. I entered movament type 561, material name and quality and all required fields. When press save, system display error "display account determination entry INT GBB-BSA 7920 not possible'.
How i should solve this error.
Raj

Hi Prasant
Thank you very much. My problem is solve, now i can create stock and can save order.
Another small problem when i create delivery system display error "delivery can not be created for order no........... order type OR", what wrong i am doing
Raj

Can not open dreamweaver due to missing menu.xml file, how do I fix this problem?

Can not open dreamweaver due to missing menu.xml file, how do I fix this problem?

@alicia - We have seen such issues before
Allow me to quote David Powers from http://forums.adobe.com/thread/1192197
The menus.xml file is normally in your personal configuration folder. Before going to the trouble of reinstalling, try deleting your configuration folder. Details of how to find it are here: http://forums.adobe.com/thread/494812.
When you launch Dreamweaver, it should build a new configuration folder.

Media card can not be accessed due to fatal errors and media card format failed

hi
anybody please help me. when i insert media card in blackbeery 8520 mobile i am getting the below message.
"media card can not be accessed due to fatal errors" and
when i try to format the media card on mobile i am getting the following message.
"media card format failed"
i tried to connect this media card to PC. but PC not showing any message and not even displaying the card in "my computer" folder.
i have some important files on the media card.
can some please help me to clear this problem and get my files.

mrvonzuela wrote:
Help Guys! please!
Hi mrvonzuela,
On your BlackBerry® smartphone, go into Options > Device > Storage, remove the check mark next to Media Card Support then press the menu key and choose save. Place a check mark in the Media Card Support box again, then press the menu key and choose save.
Please thank those who help you by clicking the button.
If your issue has been solved, please resolve it by marking "Accept as Solution"

VL048 Delivary can not be competed due to Bottelneck block in SO.

Delivary can not be competed due to Bottelneck block in sales order .Error No VL048.
We have checked the settings in Config for Bottel neck reason but nothing has been defined in OVLS. We have also checked Customer master it is not blocked.
How to correct this???
Plz Help....

If the scenario is related to Cable Solution, then refer note 408134. Else check note 90532
thanks
G. Lakshmipathi

I can not log in due to file vault error

I am the system administrator and I can not log in due to file vault problem.. How do I fix this?

From a simple Google search of "repair file vault on Mac" I got this: Repairing a FileVault-protected Home folder
OT

HT1926 can not download itunes due to not having msvcr80.dll and secerity reasons

can not download itunes due to not having msvcr80.dll and security reasons

Go to unintstall on computer remove these files in this order.
Remove itunes
applesoftware
apple mobile device support
bonjour and apple applied support
Re-install itunes
unclick "open in compatability mode"
It will work fine. Everything has worked for me after I learned this!!

PO can not be created due of amount value approved in related PR

Similar Messages

Maybe you are looking for