PO Closed Indicator table
Hi,
I have the table for EKBE in front to individual item in field ELIKZ,, X is there if the delevery is complteed for that item, i want to know the table name and the field name to see teh PO which is complety closed at PO Level.
regards,
zafar
Hi
If you want to manually close the PO then activate the Delivery completed indicator and Final invoice indoicator.
If you want to extract the closed POs then you can use the report ME2L, ME2N etc with proper selection parameters and Dynamic selections.
If you want to extract the closed PO trhu table & field then Use EKPO-ELIKZ ( Del comp) & EKPO-EREKZ - Final Invoice
Hope it helps
Thanks/Karthik
Similar Messages
-
Hi All,
I have question in PR closed indicator, whether it set automatically once we create PO for full quantity of PR or not.
We are using ECC 5.0, it is not setting automaticaly after convrting PR to PO for full quantity.
And please let me know the use of Set reqs. to "closed" in ME59N transaction.
Thanks in advance.
Regards,
SandhyaHi Sandhya,
I have question in PR closed indicator, whether it set automatically once we create PO for full quantity of PR or not.
No, this activity will never happen in standard SAP. You have to do it manually only in Me52N.
Purchase Requisition Closed
Flags a purchase requisition as closed, that means that no further purchase orders are to be created for this purchase requisition.
Use
You can:
Set this indicator manually
In change mode for a purchase requisition on the item detail screen
When you create a purchase order with reference to a purchase requisition
Have the system set the indicator when automatically creating purchase orders from purchase requisitions
You can use the indicator Set reqs to "closed" to specify that the purchase requisition is considered closed once the associated purchase order has been created, even if the complete requisition quantity has not been ordered.
Dependencies
A purchase requisition can, for example, be archived once it has been flagged as "closed", although the complete requisition quantity has not been ordered.
Rgds
Utsav -
Closed Indicator in PR automatically Tick by click on Delivery Comp. in PO
Hi,
When we create a PR with 10 Qty..create PO with same quantity..and create MIGO for 6 Qty. Now we want to short close the PO.
Now Requirement is: -
Can the closed indicator in PR be made to get automatically checked once the delivery complete indicator in PO is ticked..??
Please guide..you can close the PR from PO thru item> delivery schedule. on the extreme right of the line item in the schedule you get a button to close the PR.
-
Config settings for Closed indicator in PR
Dera experts ,
I want the system to automatically set the "closed " indicator in PR "quantity/Dates" tab , once a PO has been generated ( fully/partially ordered)
Can anyone tell me the settings for the same ??
Regards
AnisHi frnd,
I dont think so that there is any such config for "closed" tick.
We have to manually set the tick either in ME52N or buyer can set the tick at the time of PO creation.
In ME21N ( buyer have to goto Item Detail - Delivery Schedule - Click PR closure tab).
Or you can Create a BDC and create a Z program and Z t-code and ask user to run the same for bulk PR line item closure.
I hope this will help.
lets see what others have to say about it.
Regards,
Amit P Hiran
njoy SAP...
njoy Lyf.... -
PR To PO conversion via ME59, Closed Indicator
Hi,
We have set up ME59 to create POs from PR.
1.The 'Closed' indicator (in Quantities/Dates tab of PR) was not set. What to be done?
2. Main thing which is baffling is that in Production system, multiple POs continue to get created for a single PR.
Any thoughts on how to have the indicator set up to closed in PR?
and How to avoid the multiple PO issue?
fyi..
while running ME59, I have set 'Set Requisitions to "Closed"' to '1'.
RegardsThanks Pavan/Charlie,
I had already done the setting of 06 76.(Could not actually simulate and verify, as in the dev. duplicate POs were never created.)
Before I move that to Production, also wanted to know about the 'CLOSED' indicator.
Pavan,
You are right when POs are created manually (ME21N). Closed indicator does not stop it. However it restricts the PO creation when set in background (ME59 variant set to run in background.)
Charlie,
The issue with 2(Always) would be that even for Partial PR conversion to PO, then the PR may be prematurely closed.
A.) What would be your suggestion to take care of the 'CLOSED' issue?
B.) If 06/76 set up for error, then can the setting 06/608,06/648 be avoided?
Regards,
Sameer -
Set automatically closed indicator in PR while contract/agreement created
Hi experts,
Is there any possibilities that we can set automatically closed indicator in PR while contract/agreement created?
Normally, PR closed indicator is set when PO created refer to the PR.
Is there any IMG configuration to utilize this matter?
Thanks
MDHi,
You can try this using the Userexit in PR.So once the RFQ or Agreement is created for the PR then the ststus will be changed.
Check this user exit.MEREQ001 Customers' Own Data in Purchase Requisition
Regards,
Raj -
APO Bapi - ERROR - No entry found in transportation indicator table for fol
Hi
Experts .. need help on a APO bapi
Iam being doing BAPI for transportation lane to add new material through the bapi BAPI_TRLSRVAPS_SAVEMULTI
iam passing the following to BAPI
Logical system
model
and in tables .
TRANSPORT_LANE
TRANSPORT_LANEX
PROD_PROCUREMENT
PROD_PROCUREMENTX
LOCATION_FROM = '1010'.
LOCTYPE_LOC_FROM = '1001'.
LOCATION_TO = '1101'.
LOCTYPE_LOC_TO = '1001'.
the above data is common for passing all the four bapi tables and in
addition iam passing
prod-valfr = Converted value by passing to FM - IB_CONVERT_INTO_TIMESTAMP.
prod-valto = Converted value by passing to FM - IB_CONVERT_INTO_TIMESTAMP.
prod-product = material number.
AFter excuteing bapi iam getting an error
No entry found in transportation indicator table for following objects
the above error occured when passed the given data to bapi table - PROD_PROCUREMENT
if we pass the data to PROD_PROCUREMENT and PROD_PROCUREMENTX
then there is no error in table return of bapi but the data is not uploaded in transportation lane.
I will really appreciate if some guide me where iam wrong or some other solution for this .
Regards .
Thanks .Hi,
I am writing bdc code for uploading changing inspection plan data using qp02 . I saw your post in sdn .I think you have solution .can you tell the solution .
Regards
Nandan. -
Hi Experts,
Can anyone help me on how to configure the PR closed Indicator to be auto once PR converted to PO?
I saw the help data like:
Purchase Requisition Closed
Flags a purchase requisition as closed, that means that no further
purchase orders are to be created for this purchase requisition.
Use
You can:
o Set this indicator manually
- In change mode for a purchase requisition on the item detail
screen
- When you create a purchase order with reference to a purchase
requisition
o Have the system set the indicator when automatically creating
purchase orders from purchase requisitions
You can use the indicator Set reqs to "closed" to specify that the
purchase requisition is considered closed once the associated
purchase order has been created, even if the complete requisition
quantity has not been ordered.
Regards,
MaiaHi maia!
Setting 06 076 as error message is the correct solution.
for more detials check this thread.
restriction in PR to PO conversion
Regards,
Archit Gandhi -
Table EKPO - PO Active/Closed Indicator field exist ?
Hi,
I am not an MM guy. But, i am writing a report based on MM.
I would like to know, whether any indicator field exist in EKPO table, that will give the status of an PO for a given material ? If exist, what is the name of the field and what value does it contain that indicates, whether the PO is active/closed ?
If not in EKPO table, then which table/field contains the above required info, which will also have matnr and werks fields within it ?
Thanks,
Gaurav.Hi,
please check EKPO-STAPO which is a statistical indicator.
If a purchase order item is deleted, the item is marked as 'statistical'
(field EKPO-STAPO = X) .
However, if for the item the final invoice indicator (EKPO-EREKZ) or the
inward delivery completed indicator (EKPO-ELIKZ) is set, the item is not
marked as 'statistical' (EKPO-STAPO is not set).
Just in case it is needed, note 358293 contains report zkstapo to correct ekpo-stapo where the
field is set but no deletion indicator is set.
Regards,
Edit -
Open order qty,Delivered qty,issued qty, and closing stock---Tables
Gurus,
I need to Prepare a report which will show open order qty,Delivered qty,issued qty, and closing stock.
Please help me with table names where i can find .
Regards
venu gopalHi,
Try EKPO & EKBE tables..
Thx
Raju -
Opening And Closing Balance Table
Hi All
Will any one tell me table name and field name which contain the Opening and closing balance quantity at any specific date ?
Thanks and regards
Deepak TyagiHi Deepak Tyagi,
FYI: There is no such table/field exists.
Thanks,
Gordon -
Batch Wise Closing Balances Table
Hi,
We can get period wise closing balance for Plant-Storage Location-materials in MARDH.
But i didnt find any table which can provide Plant - S.Loc - Year - Period (or Month) - Batch wise closing Balances.
Can any body please suggest a table on the above criteria.
Thanks
Pardha Saradhi Bandaru.Hi,
Check table MCHB
Regards,
Ratish -
PO free of charge indicator table
Hi all,
can someone telll me which table stores the free of charge indicator in PO?
Thanks!Hi,
Check the field variant assign to document type in Spro->MM->Purchasing->PO->Define Document Types
Check the field status of the field Free item indicator for that variant in
Spro->MM->Purchasing->PO->Define Screen Layout at Document Level -
Vendor rating and insurance indicator table
Hi all,
In which table the fields vendor rating and insurance indicator zz_moc_rating & zz_insurance shown in EKKO stored?Hi Sathya,
These are custom fields not created by SAP but by someone in your project.
Just in EKKO if you have some Check Tables against these fields. If yes then these fields are getting populated from there. Else from some screen or program wherein user is entering some input.
Regards,
Chetan.
PS: Reward points if this helps. -
Release Status Indicator table in SPRO
Hi,
I am a abaper and one of collegue is facing a customizing problem in which he wants to know whether the release indicator has been changed or not by anyone?
Please provide some knowledge about it i.e. how it is to be checked or which table is to be used for it?
Edited by: nav009 on Feb 9, 2010 12:14 PMHi
Th list below show the tables used for Rel stg., pls use the appropriate one
Release strategy tables
Ans: T16FG - Release Groups
T16FC - Release Codes
T16FB - Release Indicator: Purchasing documents
T161S - Release Indicator, Purchase Requisition
T16FE - Description of Release Indicators: Purchasing Documents
T16FS - Release Strategies
T16FV - Release Prerequisites
T16FK - Release Statuses
Maybe you are looking for
-
Custom Install Never Works For Me FCS 1
I installed Leopard the other day and now I just want to reinstall Motion 2 and nothing else. I put in my FCS 1 installer disc and I did the custom install option where I deselected everything but the Motion application (no content). I clicked contin
-
Preview.app make "move tool" default on PDFs
Hi, I'd like to make the "move tool" the default when opening PDF files. I guess that most people do read those files instead of selecting text - I wonder why "select text" is the default. I am also aware of this post: http://discussions.apple.com/th
-
I choose detect flash player option when publishing my flash files. I am having trouble with modifying the html page that is created when one chooses detect flash. The code to detect flash is very large and is in the HEAD and the BODY of the html pag
-
I am trying to renew and download my WSJ apple. The iPad tells me I must sync to my computer...I do not have a computer..Any ideas?
-
ADDRESS BOOK OPENS IN BACKGROUND WHEN DASHBOARD OPENS
When I open Dashboard from the dock, it also opens my Address Book in the background. When I close Dashboard, the Address book closes. Does anyone know why and how to correct this?