PO Condition record
Dear friends,
In import PO I have conditons types like,
JCV1-CVD
JECV-Ecess
J1CV-HEcess
JADC-Additional customs duty
JCDB- IN basic custom duty..... etc,
I have maintain condition records in MEK1, when i create PO, The conditon values are not picking up from the condition records to PO, please suggest me is it necessary to assign access sequence to above condition, and why the values are not picking up ,
Thanks
Hi
In Standard Import Process, the condition record is not mainatained at MEK1
No need to mainatain the access sequence also.
The condition is to be maintained manually while creating PO, as agreed with the vendor. The rate may also differ based on material.
regards
prasanna
Similar Messages
-
Error in creation of a condition record
Hi to all, I've this error when I try to create a condition record :
Implementation of Method FIELD_CHECK/DEFAULT_VALUE_SUGGESTION for BAdI /SAPCND/ROLLNAME for filter ZIUSERSTATUS is missing
Message no. /SAPCND/MAINTENANCE719
Diagnosis
Implementation of BADI /SAPCND/ROLLNAME or method FIELD_CHECK/DEFAULT_VALUE_SUGGESTION is missing for the filter characteristic ZIUSERSTATUS.
If, however, the implementation is correct (see BADI Interface Documentation) and active, there is an error in the condition maintenance layer.
System Response
An exception or error occurred because condition maintenance cannot check, convert or lock/unlock the fields of a condition record.
Procedure
Contact the department responsible for carrying out the missing implementation in the case of application fields in the customer namespace. SAP is responsible for SAP fields which are set in the field catalog (/SAPCND/CTFC) and delivered, and if the field is supported as a possible field in a condition table. SAP is also responsible for the implementation of usage fields for SAP applications, just as with condition technique fields.
In cases where SAP is responsible, contact your responsible support organization.
Could someone help me please ?Hi I just put the coding:
e_was_executed = 'X'.
into every method and however it worked.
Best Regards -
How to Delete the condition record in CRM
HI,
Can you please help me how to delete the condition record from condition table in CRM.
Please explain the usage of FM CRMXIF_CONDITION_SEL_DELETE with examples.
I have also read the documention of the function module. How to use this FM for custom defined condition table.
(this is the code given in Documentation)
DATA-OBJECT_REPRESENTATION = 'E'
DATA-SEL_OPT-CT_APPLICATION = 'CRM'
DATA-SEL_OPT-OBJECT_TASK = 'D'
DATA-SEL_OPT-RANGE-FIELDNAME = 'PRODUCT_ID'
DATA-SEL_OPT-RANGE-R_SIGN = 'I' (Including)
DATA-SEL_OPT-RANGE-R_OPTION = 'EQ'
DATA-SEL_OPT-RANGE-R_VALUE_LOW = 'PROD_1'
Thanks
ShankarHi Shankar,
I am using the same CRMXIF_CONDITION_SEL_DELETE function module to delete condition record present in CRM.
But it is giving me below error in the return table of the FM after i run the program. Can you please correct me if I am doing any thing wrong?
Error in lt_return: SMW3 CND_MAST_SEL_DEL_EXT_VALIDATE CND_M_SD
code:
ls_range-fieldname = 'PRODUCT_ID''.
ls_range-R_SIGN = 'I'.
ls_range-R_OPTION = 'EQ'.
ls_range-R_VALUE_LOW = '123456'.
APPEND ls_range TO lt_range.
MOVE lt_range TO ls_entry-SEL_OPT-range.
ls_data-SEL_OPT-object_task = 'D'.
ls_data-SEL_OPT-ct_application = 'CRM'.
ls_data-object_representation = 'E'.
CALL FUNCTION 'CRMXIF_CONDITION_SEL_DELETE'
EXPORTING
DATA = ls_date
IMPORTING
RETURN = lt_return
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
IMPORTING
return = lt_ret.
Edited by: Saravanaprasad Nadar on Jul 7, 2010 1:27 AM -
Free goods condition records - Usage in Sales Order
HI,
I have so many condition records in various KOTN9xx tables, which are for issuing free goods. If I see a sales order item, that is a free good, how do I know, on what basis (based on which condition record, in which condition table) that free good was issued?
Technically speaking: Similar to KONV table for storing transaction data on pricing, is there a table for storing transaction data on free goods?
Thanks,
JuwinFind the table number of the key combination of customer / material . & you can extract free goods condition records from this table.
Search in SE11 with the table number. -
Regarding Condition record in CRM using field MATKL (Material Group)
Hi All
Currently we are working in SAP CRM 5.2 and it has been connected with backend ECC 6.0.
This scenario is about Pricing which has been maintained in ECC and inturn flows to CRM with few filters in place.
There are few customized Condition Tables in ECC with combination of Sales org./ material group for which discount has been maintained. A proper condition record is also available for this Condition table and it has been assigned to a access sequence and inturn assigned to a condition type.
All these procedures, condition types, access sequence has flown from ECC to CRM. And all the condition tables are active in IMG (Basic Functions / Pricing / Define Settings for Pricing / Create Condition Tables)
When i check in
(SAP menu / Master Data / Prices and Conditions / SAPCND/GCM - Maintain Conditions )
Application - CRM,
Maintenance group - PRODDISCOU,
Maintenance context - GCM
Here for the above mentioned combination when i select the Key Combination (Condition Table) and enter the customized table number (Sales org. / Material Group) iam getting a dump which says the following.
Error analysis
Short text of error message:
Implementation of Method ATTRIBUTE_CONVERSION for BAdI /SAPCND/ROLLNAME for filter MATKL is missing
Program............. "/SAPCND/CL_MNT_COND_MAINT_UI==CP"
Screen.............. "/SAPCND/SAPLCOND_MAINTAIN 0100"
Screen line......... 8
Information on where terminated
Termination occurred in the ABAP Program "/SAPCND/CL_MNT_COND_MAINT_UI==CP" -
in "ON_FCODE_SELECT".
The main program was "/SAPCND/GENERAL_COND_MAINT ".
In the source code you have the termination point in line 622
of the (Include) program "/SAPCND/CL_MNT_COND_MAINT_UI==CM005".
Please let me know the solution, Request you to do the needful aSAP.
Regards
*Ramesh*Hi Ramesh,
Have you checked the following note?
Note 441083 - Transferring conditions for material group MATKL to CRM
Kind regards,
Johan Wigert -
Condition records found but do not show up in the pricing - 208
Hi,
A) In some scenario though the CR is found, access is complete, message is 208, there is not exclusion etc, simple scales..yet the value of CR is not shown / included in the pricing procedure calculation.
B) Also in another situation, always the first scale value being read though the scale value being the next higher one, i.e. it should pick up the next condition record based on the order value but it remains at the first scale, which means the scale somehow always being read is the first one irrespective of the order value.
What could be possible reason for these, debug process?
Thanks much for the help!!Check the following setting is the Price condition Type, I am assuming u are using simple scales.
in T.Code: V/06 go to the price condition type and double click it.
Check the entries:
Scale Basis: C
Check Value: A
Scale Type: Blank (This value can e maintained in the condition record for price condition type).
If further queries do post them.
Regards
AK
Please Award points if helpful -
How can i get the tax code from Condition record number
Hi all,
i have the Condition record number from which i have to get the tax code as i looked inthe KNOP that Condition record number there but no tax code is maintained there.
so is there any other way to find the tax code for particular Condition record number
Regards
sureshhi suresh,
can u tell me the field name for condition record number and in which table it is stored.
because i knew one condition number which is stored in table EKKO and the field name is
KNUMV- Number of the document condition.
from ekko take relevant details and look for ekpo where u find the tax code
filed name of the tax code id MWSKZ- Tax on sales/purchases code -
Accruals Condition Record posted late in COPA along with the Settlement
Hi Gurus,
Accruals condition record for 1 item in an Invoice is posted along with the Settlement Credit Note in COPA. While condition records of the other items from the same invoice were posted on the Billing Date itself.
For eg:
Invoice 111 Date 01.03.2011
Items Condition value
1 Z1 100
2 Z1 200
3 Z1 300
COPA Doc No. Value Field Date
001 200 01.03.2011
002 300 01.03.2011
003 100 30.05.2011
30.05.2011 is the date of Rebate Credit Note for the Invoice # 111
I also got that if Posting of Accrual is not done for an Item, Retroactive rebate settlement automatically posts a new document for accrual.
So the question is why the posting of accrual was not done on the Invoice date in the first place?
Edited by: Parth Kulkarni on Jul 1, 2011 4:31 PMHi Suraj,
i too have the same problem, the condition types for Values and quantity in COPA are assigned. The system updates the quantity for the first billing document but not for the subsequent billing documents.
Cost of goods sold and revenue gets updated.
Regards,
Prateek -
Report on Change in Condition Record effects which all Sales Orders
Hello Gurus,
Thanks in advance. My customer requires a report which gives him list of Sales Orders effected due to Change in Condition Record.
Proper input to this will be greatly rewarded.
Regards,
Vishvesh Kamdarhi,
whenever u change the condition record it will fall under the validility date, ie.,
<b>example:</b>
Condition record for cond type PR00 is
<b>valid from 01/05/2007 to 31/99/9999 is Rs.1000</b>
but suddenly when u change prices on 01/10/2007 then system will display has below
<b>vaild from 01/05/2007 to 31/09/2007 is Rs.1000
vaild from 01/10/2007 to 31/99/999 is Rs.1500</b>
hence u take all the sale orders & billing document which are created from 01/10/2007, this will slove ur purpose
SE16-->vbak--->enter -
> here u will find created on enter the date & execute
hope this heklps u
regards,
Arunprasad -
Report for Customer Condition Records
Hello ABAPers,
I want to write ABAP report to list out Material,Customer,Tax type and Tax amount. The data is available in tables A005 and KONP and the joining condition would be A005-KNUMH and KONP-KNUMH.
But since A005 s a Pooled table am not able to write a correct join condition.
Can any one guide me on how we can write this join condition?
I tried with FOR ALL ENTRIES IN TABLE but the output was not reading the value of Amount(KONP-KBETR).The amount is coming as zero always.
The code i'm using is:
SELECT MATNR KUNNR VKORG VTWEG KSCHL KNUMH INTO TABLE ITAB_JEXP FROM A005 WHERE KSCHL = 'JEXP'.
IF NOT ITAB_JEXP IS INITIAL.
SELECT KNUMH KOPOS KSCHL KBETR INTO TABLE ITAB FROM KONP FOR ALL ENTRIES IN ITAB_JEXP
WHERE KNUMH = ITAB_JEXP-KNUMH AND KSCHL = ITAB_JEXP-KSCHL.
APPEND ITAB.
ENDIF.
LOOP AT ITAB_JEXP.
MOVE-CORRESPONDING ITAB_JEXP TO ITAB.
APPEND ITAB.
ENDLOOP.
Thanks,
B P Shah
Message was edited by:
Bhavin P ShahHi,
Use FOR ALL ENTRIES for that joins are not allowed on cluster n pooled tables
refere these
LOOP AT it_kjmseg INTO wa_kjmseg.
lv_index = sy-tabix.
*--Select condition record number from table A006
SELECT SINGLE
knumh
FROM a006
INTO lv_knumh
WHERE kappl EQ 'V'
AND kschl EQ 'ZR00'
AND vkorg EQ '0010'
AND vtweg EQ '00'
AND pltyp EQ '01'
AND waerk EQ 'USD'
AND matnr EQ wa_kjmseg-matnr
AND datbi GT wa_kjmseg-fkdat.
IF sy-subrc NE 0.
*--Select condition record number from table A004
SELECT SINGLE
knumh
FROM a004
INTO lv_knumh
WHERE kappl EQ 'V'
AND kschl EQ 'ZR00'
AND vkorg EQ '0010'
AND vtweg EQ '00'
AND matnr EQ wa_kjmseg-matnr
AND datbi GT wa_kjmseg-fkdat.
ENDIF.
Regards,
Prashant -
Standard Report with Condition Type and Condition Records
Hello to all,
Is there any standard report available in which Condition Type and Condition values are displayed in either column or row format? The selection criteria can be either Quotation, Contract, Sales Order, Delivery, Invoice or Billing. Thanks anyways...Hi Huzefa,
Pls check the relevant table where the condition records are stored. then do a query with that condition table and KONP. say for eg: condn type ZINV,ZMRP gets stored in condition table A821, then combine A821 and KONP, u can input condition type and get the values........................
go to vk13, display and click on layout, u will able to see the condition table.
Rgds,
Anitha J -
How to get the exact time when condition records has been created?
Hello All,
Can anyone thorw some light on - how to find the exact time on which a particular condition record has been created?
I have tried to get it from KONP {by inputting condition record number}, but unfortunately time is not tracked over there, but the date is tracked.
Await your valuable inputs on the same.
Regards,
HrishiDear Hrishi,
Try with this
Go to display mode of the condition record through VK13 transaction from the condition record overview screen go to menu Environment >Changes>Click on Change report now system will take you to the Change Documents for conditions selection screen here you input proper selection data then execute now system will give the all the details here you can find the time also.
I hope this will help you,
Regards,
Murali. -
Condition records- setting printer for multiple vendors at the same time
Hi all,
I have maintained condition record for POs for Key combination of Doc type,Purch Org and vendors.Now for a particular doc type and P.Org , I have around 50 vendors. I need to change the printer for all these 50 vendors to 'printerx'.Is it possible? I tried selecting multiple vendors at a time and changed the printer but its not working.Hi Saurav ,
You can achieve this through SCAT transaction.
For running SCAT take the help of ABAP team.
I hope u might be having the list in the form of text file.
If not , download the same from NACH table.
Regards
Ramesh Ch -
How to delete a condition record
hi,
i maintained one condition record and deleted it in chane mode i.e using t.code vk12. Again if i make new condition records the system showing "validity dates are over lapping".
wt is it?hi srinivas,
go to VK12 , there you can see the record maintained and the validity period. Just do one thing, select your condition record and change the valid to date in the past. Thn you will get a warning below that the date is in past, just press enter and save the record. Then if you go and check the record it will not be there. Then created your new condition record.
I hope i have answered your query. reward points if solution helps.
Regards,
Allabaqsh G. Patil -
How to create the condition record by ABAP program
Hi Friends,
I want to create/change the condition record of PR00 by ABAP program. It seems that there have no such BAPI/standard function can help on this. Can any one of you point out a way to me?? Thanks in addvance.
Joe GR.Joe,
Check with below FM..
BAPI_PRICES_CONDITIONS.
Check this link:
Re: Sample code for BAPI_PRICES_CONDITIONS
examples....
http://www.4ap.de/abap/bapi_prices_conditions.php
Two useful threads on Same topic
Re: Sample code for BAPI_PRICES_CONDITIONS
Re: Problem with BAPI_PRICES_CONDITIONS
BAPI_PRICES_CONDITIONS
Please check this sample code from other thread.
wtable1-table_no = '306'.
wtable1-applicatio = 'V'.
wtable1-cond_type = 'ZPR0'.
wtable1-operation = '009'.
wtable1-varkey = '13001001USD 000000000050068946'.
wtable1-valid_to = '99991231'.
wtable1-valid_from = '20051101'.
wtable1-cond_no = '$000000001'.
APPEND wtable1 TO table1.
wtable2-operation = '009'.
wtable2-cond_no = '$000000001'.
wtable2-created_by = sy-uname.
wtable2-creat_date = '20051022'.
wtable2-cond_usage = 'A'.
wtable2-table_no = '110'.
wtable2-applicatio = 'V'.
wtable2-cond_type = 'ZPR0'.
wtable2-varkey = '13001001USD 000000000050068946'.
wtable2-valid_from = '20051101'.
wtable2-valid_to = '99991231'.
APPEND wtable2 TO table2.
wtable3-operation = '009'.
wtable3-cond_no = '$000000001'.
wtable3-cond_count = '01'.
wtable3-applicatio = 'V'.
wtable3-cond_type = 'ZPR0'.
wtable3-scaletype = 'A'.
wtable3-scalebasin = 'C'.
wtable3-scale_qty = '1'.
wtable3-cond_p_unt = '1'.
wtable3-cond_unit = 'EA'.
wtable3-calctypcon = 'C'.
wtable3-cond_value = '454'.
wtable3-condcurr = 'USD'.
APPEND wtable3 TO table3.
CALL FUNCTION 'BAPI_PRICES_CONDITIONS'
EXPORTING
PI_initialmode = 'X'
PI_BLOCKNUMBER =
TABLES
ti_bapicondct = table1
ti_bapicondhd = table2
ti_bapicondit = table3
ti_bapicondqs = table4
ti_bapicondvs = table5
to_bapiret2 = table6
to_bapiknumhs = table7
to_mem_initial = table8
EXCEPTIONS
update_error = 1
OTHERS = 2
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
READ TABLE table6 WITH KEY type = 'E' TRANSPORTING NO FIELDS.
IF sy-subrc = 0.
loop at table6 into ret.
write: / ret-type, ret-message, ret-id, RET-LOG_NO, RET-LOG_MSG_NO,
RET-MESSAGE_V1, RET-MESSAGE_V2, RET-MESSAGE_V3, RET-MESSAGE_V4,
RET-PARAMETER,RET-ROW,RET-FIELD.
endloop.
ELSE.
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
*EXPORTING
WAIT =
IMPORTING
return = ret
ENDIF.
Don't forget to reward if useful.... -
How to update all condition records at a time with some percentage or some
Dear Sir,
In PRD system we have more than 600 condtion records.
Noe desiel hikes happend, due to that client want to update all condition records(600) at a time with required percentage or required value.
How to update all records at a time
With regards
LakshmikanthHi,
Through BDC or LSMW first you have to do the recording for particular transaction code and then base on that u have to prepare the flat file to upload the file for the same.
For BDC programing you have to take the help of ABAP progmer but LSMW you can also do.
For more information about LSMW plz go to following link :
[LSMW |http://www.slideshare.net/arun_bala1/sap-sd-lsmw-legacy-system-migration-workbench/]
[Step-by-Step Guide for using LSMW|www.scmexpertonline.com/downloads/SCM_LSMW_StepsOnWeb.doc ]
BDC
[BDC Call Transaction|http://www.sapdevelopment.co.uk/bdc/bdc_ctcode.htm]
[BDC Recording|http://www.sapdevelopment.co.uk/bdc/bdc_recording.htm]
But it would be better for you to please contact to your ABAPer for BDC programming.
Cheers...
Maybe you are looking for
-
ISA 5.0 Log-On Problem with B2B
Dear All, we use the B2B of ISA 5.0 on the SAP J2EE Engine 7.00 with ERP2005 as backend. The B2B was configured via XCM. Three components have been configured there as they are part of our customer application configuration: jcodata: test to the ERP2
-
How do I open a GoLive backup .site file in Dreamweaver CC?
Hi, I need to recover an old website. It's a .site file that was created in GoLive CS2. I now have Dreamweaver CC and need to find out how I can import/convert that site to open it in Dreamweaver. Please help!! I am using Mac Mountain Lion OSX.
-
How do I add a "normal" space?
Given a text location, I'd like to use the Doc object's addtext method to a "normal" space. I say normal space because I can't actually figure out what type of space FrameMaker is using by default and I haven't been able to find any documentation abo
-
10.8.2 EndNote X4.0.2 no longer works in Word 2011
EndNote X4.0.2 no longer works in Word 2011. I can't insert a citation without seeing the attached message and Word freezing. This is the latest in a long line of Mountain Lion frustrations. I wish I have never upgraded from Snow Leopard. Message
-
How to create a clickable video link in Contribute
I am new to Contribute and am trying to figure out how to do the following. I have a video on my website and want to insert an image with a play button which will link to the video on my site. The video is on an html page with swf embedded in it (c