PO confirmation tablecontrol screen change in ME2*N transactions

Hi Experts,
My client's business require me to add one new columns in PO item level confirmataion table control screen in ME21N,ME22N,ME23N transactions.
These column field(ZZ*) is to be taken from EKES table under append structure.
Any inputs how to proceed further.
Thanks in advance.
Muru.P.

Hi Neha,
Thanks for your quick reply.
I want to enhance existing table control screen (Standard)where will come under PO item confirmation tab in ME2*N transactions.This table control reference from EKES table. Already i appended customized field in this table. Now i want to add one more column in this table control screen using any screen exits or BADIs.Is it feasible or not? if it is feasible,Pls give me further steps..
Thanks.
Muru.P.

Similar Messages

PO confirmation creates PO change message

Hi.
I have setup a SRM -> XI ->SUS -> XI -> SRM scenario.
Everything is working fine accept that when the vendor confirms the PO and Sends the SUS PO confirmation the SRM automatically creates a PO change message back to the SUS system.
This causes the PO on SUS to go to "in process" state again.
Any idea why this is happening.
I do see this in the tracking tab under Chnage documents:
Status:
"Variance in PO Response Newly Added"
Many thanks
Rodney

Hi Neha,
Thanks for your quick reply.
I want to enhance existing table control screen (Standard)where will come under PO item confirmation tab in ME2*N transactions.This table control reference from EKES table. Already i appended customized field in this table. Now i want to add one more column in this table control screen using any screen exits or BADIs.Is it feasible or not? if it is feasible,Pls give me further steps..
Thanks.
Muru.P.

Confirmation status is changed

Hi Folks.I am working on SNC7.0.I created New PO and then iam confirming PO.While click on save button confirmed status will be CONFIRMED but after click on publish button confirmed status is changed to NOT CONFIRMED.These changes are in Po details screen.In that PO header General tab.
Any suggestions how to resolve this issue.
Thanks in advance.

Hi Srinivas,
In path:SPRO>Supply Network Collaboration>Basic settings>Validation>Own setting you will not get any values(even if you press F4 also).
There is no check here if you enter any junk value also system will save.
As i suggested earlier you need to maintain validation setting manually(do not press F4).
Save the validation setting as suggested and recheck now.
About validation check PO_CONF_RELEVANCE_CTRL :"Set Confirmation Status for Changed PO Item to "Not Confirmed"
If this validation check is active, SAP SNC sets the confirmation status of a purchase order (PO) item to Not Confirmed if the customer has changed the following item data in the customer back-end system and has sent the changed PO to SAP SNC:
■Goods recipient
■Ship-to location
■Product
■Requested delivery date
■Incoterm
■Price
Validation check PO_CONFIRMATION_DELETE:"Delete Confirmation Schedule Lines for Changed Purchase Order Items"
If this validation check is active, SAP SNC deletes the confirmations schedule lines of a purchase order item if the customer has performed a change that requires confirmation by the supplier. Changes that trigger deletion include the following: Quantity changes and the changes listed in the description for validation check PO_CONF_RELEVANCE_CTRL
Regards,
Nikhil

Unable to open email inbox or files. screen changed suddenly last night. got some message about patch not being applied. i have the patience of a gnat and have no clue how to fix this issue. HELP! in English

I'm running Mozilla-firefox on a Lenovo laptop. Last night the screen changed suddenly. brief alert about patch. unable to open email inbox to read/send emails. logged off thinking all would be right by morning. today, can access internet, google, etc, but unable to open email inbox. plus the listing of the various yahoo accts has changed the sequence order. please help. i depend on my email for my livelihood. i can read emails on my blackberry so the issue is not my internet provider.

In the patch 29, it is
function encode_attachment(str) {
var c, i, s = ''
for (i = 0; i < str.length; i++) {
switch (c = str.charAt(i)) {
case ' ':
case '#':
case '?':
case '%':
s += NN ? '_' : escape(c); break
default:
s += c
return s
NO issues seen, Able to open attachment which has space in the file name.

Screen changes are not active in production tenent

Hi Experts,
I realized the transport of a solution to the production environment and as can be seen in the attached image the solution has been successfully activated.
The scripts "OnSave", "AfterModify", etc for example are up and running in the production environment, but all the changes that were made on screen are not displayed to users.
Does anyone know how to make the screen changes available to users?
Best regards.

Hello Felipe,
What tool did you use to "make changes on screens"?
UI Designer started from SDK?
Adaption mode in UI?
Bye,
Horst

What makes my screen change after going to sleep?

I have os10.9.2 and since I installed it 6 weeks ago my screen changes sizes after it wakes up. I have a mac mini.

At the bottom of your thing it says you are using 10.7.1. Is this correct? If so, run Software Update first, and see where that takes ya. From there, if you are still having issues with the black screen, try opening Disk Utility, and hit Verify Disk. If this comes up with errors, re-start your computer holding the Option button down, from there, select Recovery Disk as your start up disk. You will be able to locate Disk Utility in there, and you can Repair Disk from there.
If it does repair disk successfully, that could be part of the problem. If that doesn't work, follow the steps in this article to reset PRAM/NVRAM http://support.apple.com/kb/ht1379
Even still, if that doesn't seem to correct the problem, i would back up everything on your computer to an external harddrive, erase, and re-install 10.6, run Software Update a few times, check the app store for the digital download of Lion....you should not need to "buy" this again, it should see it in the purchased section..
Update again with Software Update when you get the successful re-installation of Lion. I'm not 100% positive with the whole re-installation steps, if it walks you through going through the Migration Assistant or not, but even if it doesn't, that's okay. You can still locate Migration Assistant via the Utilities folder and bring back all your Time Machine stuff again.
Still if you want to dig even deeper to see if there is a problem with your hardware, you can run Apple Hardware Test. Check this article for steps...http://support.apple.com/kb/HT1509

Screen changing colors

Hey guys. Lately every time I've woken up my Macbook the screen changes colors. It will go through all of the primary colors and then some gray horizontal and diagnoal stripes, and sometimes the screen will flash in and out. Usually if I close the lid and reopen a couple seconds later, it's fine. But, is there any way of fixing this? I don't want it to turn into a bigger problem.

You may be having a problem with your screen, your integrated GPU or your connection cable between the logic board and the screen. The only way to ferret out which problem you have would be to take your machine into your local Apple Store or an AASP and have them run diagnostics on the unit. They can give you an idea of what's up with the machine and an estimate on what it would cost to fix it.
Good luck,
Clinton

Pavilion DV& screen changing colors

When turning on the laptop, the screen changes colors (red, green, gray, blue, etc) before coming on. It took almost 25 minutes for it to stop and then finally get the sign on screen.
What could be the problem? The laptop is about 3 years old.
If it need to be repaired, where would i go (Staples? BestBuy?)
Is it something I could fix myself?
TIA

@harperhp ,
Hello and thank you for posting on the HP support forum. Generally when you experience this issue it is due to a failure of the graphics card.
Does this happen if you try and boot into safe mode?
Entering Safe Mode (Windows 7)
Please post back if you can get into safe mode without this issue. If you have the same problem going into safe mode then you will want to contact HP phone support for repair options. You may not be able to get the parts through third party vendors.
Please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region.
http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
Thank you again for posting and have a great day.
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
D5GR
I work on behalf of HP

Computer Screen Changes Colors

When I open Adobe Acrobat 8 my computer screen changes color and the dots on the screen show. Do you know what setting is wrong?

This is the Reader forum. The Acrobat one is here:
http://forums.adobe.com/community/acrobat

Screen changes colors after macbook dropped

Yesterday I accidentally dropped my laptop and when trying to recover, the screen changes from alternating full screen colors (red - green - blue and then black and white gradients). I'm guessing this has to do with the graphics but I am not sure if this has happened to anyone else and if there is some sort of reset button.?

That symptom appearing after a drop surely indicates hardware damage so no reset, even if available, is going to help. You'll need to have an Apple Store or Authorized service provider evaluate it. Hopefull it is something small like a damaged display cable but, if the GPU was jarred from its solder joints by the impact (quite likely) the only real cure is a new logic board.
If you have homeowners'/renters' insurance, put your carrier on notice of an accident. many such policies cover repair/replacement after an accident--even outside the home--subject to the usual deductible.

Need help on IDES screen change script

Dear All..
Can any one tell me the steps of the IDES screen change when sap logged on.., i want put my company logo and company name..
advanced thanks for help
Praveen

I got the script for this question..
Thanks
Praveen

Screen Change when using LDB - pnp

Hi ,
I am facing a strange problem.
I am using LDB -> pnp and HRIN0013 as Master data rep ,
in one of the programs that i developed.
The Screen and program behave fine in the development server.
Once i transport it to the production server, the Screen changes to something completely different.
What i noticed is that in attributes -->'Report category assignment' , HRIN0013 is not present.
This means that HRIN0013 has not been transported?
What can the problem be and how can i fix it?? I need to get this in by tommorow. Help will be highly appreciated.

Hi Sanchit,
when I change the report class in an HR report, the system tells me for the change request number.
This change request, introduces, I think, a new record in some customize tables, like t599C.
There must be a record in this table, for the report class that you create.
Hope this helps you,
Carles

Dynamic selection screen change in Selection Screen.

Hi Experts,
I am not getting dynamic screen change on selection screen. can you give solution for the following scenario.
I have 3 radio buttons on selection screen. Example: R1, R2, R3.
I have 5 fields on selection screen. Example : F1, F2, F3, F4, F5.
When i select radio button 1 i will get F1 field screen only.
When i select radio button 2 or 3 i will get F2 and F3 fields screen only.
When i select radio button 3 i will get F4 and F5 fields screen only.
Any one give me solution for the above scenario very much thankful.
Thanks in advance,
Sai

Hi
try this code,
REPORT ZTEST_3RB.
TABLES : KNA1,EKKO,VBRK.
PARAMETERS : SALES RADIOBUTTON GROUP VIJJ USER-COMMAND VJY ,
PUR RADIOBUTTON GROUP VIJJ ,
BILL RADIOBUTTON GROUP VIJJ ,
TOTAL AS CHECKBOX.
SELECT-OPTIONS : S_CUSTNO FOR KNA1-KUNNR MODIF ID AKP DEFAULT 1000 TO 1033,
S_PONO FOR EKKO-EBELN MODIF ID VKP,
S_BNO FOR VBRK-VBELN MODIF ID PKP.
INITIALIZATION.
AT SELECTION-SCREEN OUTPUT.
LOOP AT SCREEN.
IF SALES = 'X'.
IF SCREEN-GROUP1 = 'VKP'.
SCREEN-INPUT = 0.
SCREEN-ACTIVE = 0.
MODIFY SCREEN.
ENDIF.
IF SCREEN-GROUP1 = 'PKP'.
SCREEN-INPUT = 0.
SCREEN-ACTIVE = 0.
MODIFY SCREEN.
ENDIF.
ELSEIF PUR = 'X'.
IF SCREEN-GROUP1 = 'PKP'.
SCREEN-INPUT = 0.
SCREEN-ACTIVE = 0.
MODIFY SCREEN.
ENDIF.
IF SCREEN-GROUP1 = 'AKP'.
SCREEN-INPUT = 0.
SCREEN-ACTIVE = 0.
MODIFY SCREEN.
ENDIF.
ELSEIF BILL = 'X'.
IF SCREEN-GROUP1 = 'AKP'.
SCREEN-INPUT = 0.
SCREEN-ACTIVE = 0.
MODIFY SCREEN.
ENDIF.
IF SCREEN-GROUP1 = 'VKP'.
SCREEN-INPUT = 0.
SCREEN-ACTIVE = 0.
MODIFY SCREEN.
ENDIF.
ENDIF.
ENDLOOP.
i think this will help your problem,
Regards,
Vijay

Upgrade from 4.7 to ECC 6.0 - screen changes

Does anyone have a document detailing the HCM screen changes from 4.7 to ECC 6.0

As mentioned, there are not many changes in screens - I guess you'll just have to wait and see.
But this was never a problem during upgrade.
Be ware of note 783499 and it's implications.
You will have problems with IT0009 until this note was handled.
One more thing. Some of the infotypes no longer accept maintenance of text. You need to turn this off in T582A, otherwise it looks like you can save text, but nothing is saved. Whenever you hit T582A you will get an error message if the text maintenance is ticket off and not allowed. But it is not turned off automatically during upgrade, so you have to check the infotypes. I seem to remember IT0002, 0006,0021 are some of the infotypes no longer accepting text maintenance.
Hope this helps
Kirsten

System Number in License screen changed after system copy

I have completed a Homogeneous system copy from GTP (Global Trade Production) to GTQ (Global Trade QAS). After the copy the system number in the SLICENSE screen changed from the original number when I first created GTQ to the system number listed in GTP. Now my permanent license key for GTQ will not work because the system number is different. Is there a way to change that system number so the License key will install?
Thanks
David

No. Thats not possible.
You need to update the info and request a new license at SAP Service Marketplace and install it on your system.
Regards
Juan
Please reward with points if helpful

PO confirmation tablecontrol screen change in ME2*N transactions

Similar Messages

Maybe you are looking for