PO Creation Error - "Price could not be translated to standard currency"

Hello SRM Experts
Using SRM 5.00 in an extended classic scenario
I have a purchaser who every time they convert a shopping cart in the sourcing cockpit into a PO gets the above error message on the Sourcing Document Preview screen for each line item. They can ignore it and continue without any consequence to the PO and it's status.
In comparing to other UK based purchasers their Purch Org Structure is identical with only GBP defined as the Local Currency attribute. I have ensured that all country related parameters against their profile and purchasing group points to the UK. None of the other UK purchasers have this problem.
Hope you can help.
Thanks
Ian

Hi Masa
Thanks for your response.
Unfortunately, this is happening for every SC they are converting into a PO. Regardless of the Vendor and it's currency.
Regards
Ian

Similar Messages

Error : Price could not be determined

Error : For a new plant for a new material its giving error
*No Price could be determined for material/batch 20002/Plant 5001
Wht reason could be for this error. while creating an indent

The price in accounting view, it picks up the moving price automatically need not be entered as per valuation but the problem is itz not picking the price and showing value as 0.00
This is happening only for new plant. Is there any plant specific setting for material.?????
The price is being picked up for material in other plants. Itz not getting picked up only for one plant.
Any solutions plz????

FIM 2010 R2 - Error 3000: " Some or all identity References could not be translated"

Hi Everyone, I installedFIMPassword Resetand RegistrationService, butwhen I try tologinto the portal.
I getthe following error.
I followed the steps in "TestLab"and alsofollowed the instructionson the requirements ofFIMself-servicePasswordReset.
Greetings
and thank you very much
for
your help.
Error:
An error has occurred. Please try again, and if the problem persists, contact your help desk or system administrator. (Error 3000)
Go to Self-Service Password Registration home page
An error has occurred. Please try again, and if the problem persists, contact your help desk or system administrator. (Error 3000)
Details: System.Security.Principal.IdentityNotMappedException: Some or all identity references could not be translated. at System.Security.Principal.SecurityIdentifier.Translate(IdentityReferenceCollection sourceSids, Type targetType,
Boolean forceSuccess) at System.Security.Principal.SecurityIdentifier.Translate(Type targetType) at System.Security.Principal.WindowsIdentity.GetName() at System.Security.Principal.WindowsIdentity.get_Name() at Microsoft.IdentityManagement.CredentialManagement.Portal.Components.RegistrationDriver.GetDomainAndUserName(String&
domain, String& userName) at Microsoft.IdentityManagement.CredentialManagement.Portal.Components.RegistrationDriver.InitiateRegistration() at Microsoft.IdentityManagement.CredentialManagement.Portal.Registration.Next() at System.Web.UI.WebControls.Button.OnClick(EventArgs
e) at System.Web.UI.WebControls.Button.RaisePostBackEvent(String eventArgument) at System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl, String eventArgument) at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint,
Boolean includeStagesAfterAsyncPoint)

I saw the log and it has the following: what could be happening?
thank you so much for your time and help again. The user used is utest10. I see that time is wrong, because here is 9:00 o'clock but log show me 11:41
#Software: Microsoft Internet Information Services 7.5
#Version: 1.0
#Date: 2014-09-18 11:41:44
#Fields: date time s-ip cs-method cs-uri-stem cs-uri-query s-port cs-username c-ip cs(User-Agent) sc-status sc-substatus sc-win32-status time-taken
2014-09-18 11:41:44 10.0.0.8 GET / - 443 - 10.0.0.15 Mozilla/4.0+(compatible;+MSIE+8.0;+Windows+NT+6.1;+WOW64;+Trident/4.0;+SLCC2;+.NET+CLR+2.0.50727;+.NET+CLR+3.5.30729;+.NET+CLR+3.0.30729;+Media+Center+PC+6.0)
401 2 5 46
2014-09-18 11:42:39 10.0.0.8 GET / - 443 LAB\utest10 10.0.0.15 Mozilla/4.0+(compatible;+MSIE+8.0;+Windows+NT+6.1;+WOW64;+Trident/4.0;+SLCC2;+.NET+CLR+2.0.50727;+.NET+CLR+3.5.30729;+.NET+CLR+3.0.30729;+Media+Center+PC+6.0)
302 0 0 38093
2014-09-18 11:42:39 10.0.0.8 GET /default.aspx CookiesEnabled=true 443 LAB\utest10 10.0.0.15 Mozilla/4.0+(compatible;+MSIE+8.0;+Windows+NT+6.1;+WOW64;+Trident/4.0;+SLCC2;+.NET+CLR+2.0.50727;+.NET+CLR+3.5.30729;+.NET+CLR+3.0.30729;+Media+Center+PC+6.0)
302 0 0 31
2014-09-18 11:42:49 10.0.0.8 GET /default.aspx - 443 LAB\utest10 10.0.0.15 Mozilla/4.0+(compatible;+MSIE+8.0;+Windows+NT+6.1;+WOW64;+Trident/4.0;+SLCC2;+.NET+CLR+2.0.50727;+.NET+CLR+3.5.30729;+.NET+CLR+3.0.30729;+Media+Center+PC+6.0)
200 0 0 10109
2014-09-18 11:42:49 10.0.0.8 GET /css/core.css - 443 LAB\utest10 10.0.0.15 Mozilla/4.0+(compatible;+MSIE+8.0;+Windows+NT+6.1;+WOW64;+Trident/4.0;+SLCC2;+.NET+CLR+2.0.50727;+.NET+CLR+3.5.30729;+.NET+CLR+3.0.30729;+Media+Center+PC+6.0)
304 0 0 15
2014-09-18 11:42:49 10.0.0.8 GET /js/webkit.js - 443 LAB\utest10 10.0.0.15 Mozilla/4.0+(compatible;+MSIE+8.0;+Windows+NT+6.1;+WOW64;+Trident/4.0;+SLCC2;+.NET+CLR+2.0.50727;+.NET+CLR+3.5.30729;+.NET+CLR+3.0.30729;+Media+Center+PC+6.0)
304 0 0 31
2014-09-18 11:42:49 10.0.0.8 GET /js/Common.js - 443 LAB\utest10 10.0.0.15 Mozilla/4.0+(compatible;+MSIE+8.0;+Windows+NT+6.1;+WOW64;+Trident/4.0;+SLCC2;+.NET+CLR+2.0.50727;+.NET+CLR+3.5.30729;+.NET+CLR+3.0.30729;+Media+Center+PC+6.0)
304 0 0 15
2014-09-18 11:42:49 10.0.0.8 GET /ScriptResource.axd d=DhgbGNsDUTuISZAuj5YwF2bxQkEFxfOF-_jtkF_XsvkB-t51v01jftu5Ic-rAOU0i4QXvfJufGloBDNu0iH9xNVzZF7zsM5kwQiKgNA6SLmdT7RBdTHtFA3POY2lH5mDpuZacVugLTKgSH0dpWf06yy2LRQ1&t=ffffffff8dc250fc 443 LAB\utest10 10.0.0.15
Mozilla/4.0+(compatible;+MSIE+8.0;+Windows+NT+6.1;+WOW64;+Trident/4.0;+SLCC2;+.NET+CLR+2.0.50727;+.NET+CLR+3.5.30729;+.NET+CLR+3.0.30729;+Media+Center+PC+6.0) 200 0 0 15
2014-09-18 11:42:49 10.0.0.8 GET /WebResource.axd d=SjOOqf6c3TZDDyM2Kgr6ykFHmew6stAqBAiKTyzeUwjxNX9Ub69YSe7iTN4RMBZZkeCqowFx_NF7PFeHmyyKusJLitg1&t=634605124860686371 443 LAB\utest10 10.0.0.15 Mozilla/4.0+(compatible;+MSIE+8.0;+Windows+NT+6.1;+WOW64;+Trident/4.0;+SLCC2;+.NET+CLR+2.0.50727;+.NET+CLR+3.5.30729;+.NET+CLR+3.0.30729;+Media+Center+PC+6.0)
200 0 0 15
2014-09-18 11:42:49 10.0.0.8 GET /WebResource.axd d=h_nFu51-6JuBheHSoSNt4UAo_RSCKSB4UONIXu6fP0qij-WsPd8lhZo9XmgfpNWXHLOSIyvzVta7rfXGJkoOnwBaPVM1&t=634605124860686371 443 LAB\utest10 10.0.0.15 Mozilla/4.0+(compatible;+MSIE+8.0;+Windows+NT+6.1;+WOW64;+Trident/4.0;+SLCC2;+.NET+CLR+2.0.50727;+.NET+CLR+3.5.30729;+.NET+CLR+3.0.30729;+Media+Center+PC+6.0)
200 0 0 31
2014-09-18 11:42:49 10.0.0.8 GET /css/customizable.css - 443 LAB\utest10 10.0.0.15 Mozilla/4.0+(compatible;+MSIE+8.0;+Windows+NT+6.1;+WOW64;+Trident/4.0;+SLCC2;+.NET+CLR+2.0.50727;+.NET+CLR+3.5.30729;+.NET+CLR+3.0.30729;+Media+Center+PC+6.0)
404 0 2 15
2014-09-18 11:42:49 10.0.0.8 GET /ScriptResource.axd d=EB3xsN3_OOC7dO7Is5VA_9RpzxmFLtDUT5ygJ5IV8nc_RAbqVnNxU1Md6FpX4PbdYTvG2G8uRfNIQ95EmhddZ1nGMFWEseAgPeUmfkbJ7bThY_221Pj8enNvYQ3xl86M5BKy8R_fXVyBg6E5KTwmu61Uzucdk3L87FFUJ7SFd_tBDoCV0&t=ffffffff8dc250fc 443
LAB\utest10 10.0.0.15 Mozilla/4.0+(compatible;+MSIE+8.0;+Windows+NT+6.1;+WOW64;+Trident/4.0;+SLCC2;+.NET+CLR+2.0.50727;+.NET+CLR+3.5.30729;+.NET+CLR+3.0.30729;+Media+Center+PC+6.0)
200 0 0 78
2014-09-18 11:42:49 10.0.0.8 GET /css/Registration.css - 443 LAB\utest10 10.0.0.15 Mozilla/4.0+(compatible;+MSIE+8.0;+Windows+NT+6.1;+WOW64;+Trident/4.0;+SLCC2;+.NET+CLR+2.0.50727;+.NET+CLR+3.5.30729;+.NET+CLR+3.0.30729;+Media+Center+PC+6.0)
304 0 0 218
2014-09-18 11:42:49 10.0.0.8 GET /images/bg-top-slice.png - 443 LAB\utest10 10.0.0.15 Mozilla/4.0+(compatible;+MSIE+8.0;+Windows+NT+6.1;+WOW64;+Trident/4.0;+SLCC2;+.NET+CLR+2.0.50727;+.NET+CLR+3.5.30729;+.NET+CLR+3.0.30729;+Media+Center+PC+6.0)
304 0 0 203
2014-09-18 11:42:49 10.0.0.8 GET /images/fimlogo.png - 443 LAB\utest10 10.0.0.15 Mozilla/4.0+(compatible;+MSIE+8.0;+Windows+NT+6.1;+WOW64;+Trident/4.0;+SLCC2;+.NET+CLR+2.0.50727;+.NET+CLR+3.5.30729;+.NET+CLR+3.0.30729;+Media+Center+PC+6.0)
304 0 0 203
2014-09-18 11:42:49 10.0.0.8 GET /images/wait_animationa.gif - 443 LAB\utest10 10.0.0.15 Mozilla/4.0+(compatible;+MSIE+8.0;+Windows+NT+6.1;+WOW64;+Trident/4.0;+SLCC2;+.NET+CLR+2.0.50727;+.NET+CLR+3.5.30729;+.NET+CLR+3.0.30729;+Media+Center+PC+6.0)
304 0 0 203
2014-09-18 11:42:49 10.0.0.8 GET /images/bg-bottom-slice.png - 443 LAB\utest10 10.0.0.15 Mozilla/4.0+(compatible;+MSIE+8.0;+Windows+NT+6.1;+WOW64;+Trident/4.0;+SLCC2;+.NET+CLR+2.0.50727;+.NET+CLR+3.5.30729;+.NET+CLR+3.0.30729;+Media+Center+PC+6.0)
304 0 0 203
2014-09-18 11:43:19 10.0.0.8 POST /default.aspx - 443 LAB\utest10 10.0.0.15 Mozilla/4.0+(compatible;+MSIE+8.0;+Windows+NT+6.1;+WOW64;+Trident/4.0;+SLCC2;+.NET+CLR+2.0.50727;+.NET+CLR+3.5.30729;+.NET+CLR+3.0.30729;+Media+Center+PC+6.0)
200 0 0 26781
2014-09-18 11:43:19 10.0.0.8 GET /Error.aspx - 443 LAB\utest10 10.0.0.15 Mozilla/4.0+(compatible;+MSIE+8.0;+Windows+NT+6.1;+WOW64;+Trident/4.0;+SLCC2;+.NET+CLR+2.0.50727;+.NET+CLR+3.5.30729;+.NET+CLR+3.0.30729;+Media+Center+PC+6.0)
200 0 0 31
2014-09-18 11:43:19 10.0.0.8 GET /css/customizable.css - 443 LAB\utest10 10.0.0.15 Mozilla/4.0+(compatible;+MSIE+8.0;+Windows+NT+6.1;+WOW64;+Trident/4.0;+SLCC2;+.NET+CLR+2.0.50727;+.NET+CLR+3.5.30729;+.NET+CLR+3.0.30729;+Media+Center+PC+6.0)
404 0 2 0
2014-09-18 11:43:19 10.0.0.8 GET /CSS/troubleshooting.css - 443 LAB\utest10 10.0.0.15 Mozilla/4.0+(compatible;+MSIE+8.0;+Windows+NT+6.1;+WOW64;+Trident/4.0;+SLCC2;+.NET+CLR+2.0.50727;+.NET+CLR+3.5.30729;+.NET+CLR+3.0.30729;+Media+Center+PC+6.0)
304 0 0 93
2014-09-18 11:43:19 10.0.0.8 GET /css/error.css - 443 LAB\utest10 10.0.0.15 Mozilla/4.0+(compatible;+MSIE+8.0;+Windows+NT+6.1;+WOW64;+Trident/4.0;+SLCC2;+.NET+CLR+2.0.50727;+.NET+CLR+3.5.30729;+.NET+CLR+3.0.30729;+Media+Center+PC+6.0)
304 0 0 62
2014-09-18 11:43:19 10.0.0.8 GET /JS/troubleshooting.js - 443 LAB\utest10 10.0.0.15 Mozilla/4.0+(compatible;+MSIE+8.0;+Windows+NT+6.1;+WOW64;+Trident/4.0;+SLCC2;+.NET+CLR+2.0.50727;+.NET+CLR+3.5.30729;+.NET+CLR+3.0.30729;+Media+Center+PC+6.0)
304 0 0 93
2014-09-18 11:43:19 10.0.0.8 GET /images/copytoclipboard.gif - 443 LAB\utest10 10.0.0.15 Mozilla/4.0+(compatible;+MSIE+8.0;+Windows+NT+6.1;+WOW64;+Trident/4.0;+SLCC2;+.NET+CLR+2.0.50727;+.NET+CLR+3.5.30729;+.NET+CLR+3.0.30729;+Media+Center+PC+6.0)
304 0 0 281
2014-09-18 11:43:19 10.0.0.8 GET /images/sendemail.gif - 443 LAB\utest10 10.0.0.15 Mozilla/4.0+(compatible;+MSIE+8.0;+Windows+NT+6.1;+WOW64;+Trident/4.0;+SLCC2;+.NET+CLR+2.0.50727;+.NET+CLR+3.5.30729;+.NET+CLR+3.0.30729;+Media+Center+PC+6.0)
304 0 0 265
2014-09-18 11:43:19 10.0.0.8 GET /images/icon-error.png - 443 LAB\utest10 10.0.0.15 Mozilla/4.0+(compatible;+MSIE+8.0;+Windows+NT+6.1;+WOW64;+Trident/4.0;+SLCC2;+.NET+CLR+2.0.50727;+.NET+CLR+3.5.30729;+.NET+CLR+3.0.30729;+Media+Center+PC+6.0)
304 0 0 265
2014-09-18 11:43:24 10.0.0.8 GET /default.aspx - 443 LAB\utest10 10.0.0.15 Mozilla/4.0+(compatible;+MSIE+8.0;+Windows+NT+6.1;+WOW64;+Trident/4.0;+SLCC2;+.NET+CLR+2.0.50727;+.NET+CLR+3.5.30729;+.NET+CLR+3.0.30729;+Media+Center+PC+6.0)
200 0 0 0
2014-09-18 11:43:24 10.0.0.8 GET / - 443 LAB\utest10 10.0.0.15 Mozilla/4.0+(compatible;+MSIE+8.0;+Windows+NT+6.1;+WOW64;+Trident/4.0;+SLCC2;+.NET+CLR+2.0.50727;+.NET+CLR+3.5.30729;+.NET+CLR+3.0.30729;+Media+Center+PC+6.0)
302 0 0 78
2014-09-18 11:43:24 10.0.0.8 GET /css/customizable.css - 443 LAB\utest10 10.0.0.15 Mozilla/4.0+(compatible;+MSIE+8.0;+Windows+NT+6.1;+WOW64;+Trident/4.0;+SLCC2;+.NET+CLR+2.0.50727;+.NET+CLR+3.5.30729;+.NET+CLR+3.0.30729;+Media+Center+PC+6.0)
404 0 2 0
2014-09-18 11:43:24 10.0.0.8 GET /default.aspx CookiesEnabled=true 443 LAB\utest10 10.0.0.15 Mozilla/4.0+(compatible;+MSIE+8.0;+Windows+NT+6.1;+WOW64;+Trident/4.0;+SLCC2;+.NET+CLR+2.0.50727;+.NET+CLR+3.5.30729;+.NET+CLR+3.0.30729;+Media+Center+PC+6.0)
302 0 0 203

Error "codepage could not be determined for the receiver-system"

Hi,
we use the idoc-adapter to send message from mySAP ERP to PI.
All worked fine.
So, this morning I have changed the datatype of the messageId from "char" to "int" in mySAP ERP in the customizing menue (install param). So, no message received in SAP PI.
When I start transction "we05" in mySAPERP" I get the following error:
"codepage could not be determined for the receiver-system" status 02.
I have changed the datatyp to "char" but the same probleme
Can anybody help me please?
Regards
Stefan

This error shouldn't occur unless there is some modification at the OS level codepages.
Please check the entried in the RFC destination for connecting to the XI system. Unicode settings.
Regards,
Prateek

Error: "Document could not be saved"

Hi all!
I regularly receive an error, "Document could not be saved", in OS X after a while of usage. It can come after 10 minutes of usage, or after 10 hours of usage. It affects ALL open applications and documents, and doesn't solve with anything but a restart of the entire system. I haven't found any relation to working with any specific application – it seems to happen at random while using any application. And as I said, it affects the entire system and all applications once it happens.
I've also tried this solution (posted elsewhere), but with no luck:
Restart Lion, and Before you hear the chime, hold down Cmd + R, to access Lion Recovery.
Click the Utilities item in the Menu Bar, then click Terminal.
In the Terminal window, type resetpassword and hit Return.
The password reset utility window launches, but you’re not going to reset the password. Instead, click on icon for your Mac’s hard drive at the top. From the dropdown below it, select the user account where you’re having issues.
At the bottom of the window, you’ll see an area labeled Reset Home Directory Permissions and ACLs. Click the Reset button there.
Does anyone know of any other solution to this problem? Or does anyone know the reason for it?
I should also mention that I experienced another problem recently, whereby my computer begun to sometimes (but not always!) show a progression bar at startup. This bar could take between 5-15 minutes to finish. This kept happening for maybe two weeks' time, until finally one day the computer wouldn't startup at all. It would come to show the dark grey Apple logo on the light grey background, and then suddenly shut off before reaching any further. I did a complete wipe out of the hard drive and re-install of the system, and since then haven't experienced the "progression bar"-problem anymore. I read somewhere that this problem could be a sign of harddrive failure or damage, but I still wonder if that is correct. Could the above mentioned "Document could not be saved"-problem also be related to a hard drive damage?
Thanks in advance for your assistance
Regards
Alex

The next time you have the problem, note the exact time: hour, minute, second.
If you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Scroll back in the log to the time you noted above. Select any messages timestamped from then until the end of the episode, or until they start to repeat. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V).
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.

HELP ME!!!! itunes wont open, error says could not open key......

I attempted to update itunes to the newest upgrade, and the upgrade was unsucceful, and now this error comes up everytime i try to open itunes (it wont open at all). the error says
Could not open key:
HKEYLOCALMACHINE\Software\Classes\.wav\OpenWithList\iTunes.exe.
Verify that you have sufficent access to that key, or contact your support personnel.
This makes no sense since this is on my home PC

hmmm. okay, if you're currently just getting the "itunes has encountered an error ..." let's try the following technique.
preliminaries
download and save a fresh copy of the itunes 6.0.1.3 installer to your hard drive. (eventually we're going to run the install from there rather than online.)
iTunes 6.0.1.3 Installer
switch off any antivirus and antispyware applications prior to any uninstalls, installs or repair installs.
uninstall
use the complete uninstall instructions given in the following document to remove your existing itunes and quicktime:
Troubleshooting iTunes, iPod Software, and QuickTime installation on Windows
... and if you run into problems on the uninstall, try using the Installer Cleanup utility:
Description of the Windows Installer CleanUp Utility
reboot after uninstalling.
reinstall
remember to switch off your antivirus and antispyware.
reinstall itunes using the 6.0.1.3 installer you downloaded previously.
if you get the "itunes has encountered a problem ..." error message again after that install, first check to see if your Quicktime will launch. if you get an error message when you try to launch quicktime, try using the following technique:
iTunes 6 for Windows unexpectedly quits when opened
keep us posted on your progress.
love, b

VSTS loadtest error while running Loadtest with Runsettings as No of test iterations , ERROR is : could not read result repository: unknown transaction id in results:

Subject: VSTS loadtest error while running Loadtest with Runsettings as No of test iterations , ERROR is : could not read result repository: unknown transaction
id in results:
Hello All,
I am facing the following error while running a loadtest (when i choose the scenario to be executed for No of test iterations). But the same loadtest with the Run duration for X minutes is running fine without any issues.
Any suggestions on the issue i am facing
error is :
could not read result repository: unknown transaction id in results:
or
could not read result repository: unknown request id in results:
Thanks
Satish

Hi Kotapati,
>>Subject: VSTS loadtest error while running Loadtest with Runsettings as No of test iterations , ERROR is : could not read result repository: unknown transaction
id in results:
According to your description, you mean that when you run your load test using the Test Iterations way and then get the error message, am I right?
If yes, please you try to close the VS, and then open this VS again. Then clean your load test project/solution and then re-build it, run your load test again check this issue again.
In addition, I suggest you could try to create a new load test and then run it using Test Iterations way check if you get the issue for the specified load test or all load tests.
If possible, I suggest you could share me simple load test for us so that we will further help you.
You could upload your load test to OneDrive and then copy link here.
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

When I try to save a photo, I get error message Could not complete your request because of a program error. What's wrong?

I edit a photo and when I click Save As, I get error message "Could not complete your request because of a program error." I exit Elements, try again, same error.
In past I had this problem but it resolved when rebooted PC. This time, PC reboot does not help.
I cannot save anything i do in elements!!
What's wrong? Any suggestions how to fix this? Anyone know what the program error is

Please mention your PSE version and underlying OS.
Also, it would be of great help in resolving the issue if you can upload a snapshot of error message.
Regards
Kishan

Saving a Photoshop CC project from a Mac (in .PSD format) to a thumb drive and trying to transfer it to a Dell laptop with Photoshop CS6. Will not open...Error message: could not complete your request because it is not a valid photoshop document.

Saving a Photoshop CC project from a Mac (in .PSD format) to a thumb drive and trying to transfer it to a Dell laptop with Photoshop CS6. Will not open...Error message: could not complete your request because it is not a valid photoshop document.

The file was corrupted somewhere along the way (assuming it was still readable on the Macintosh).
The platforms don't matter, but you still need file transfer that doesn't corrupt files...

HT201328 after unlocking from ATT and resetting iphone 3gs I keep getting the same error message "could not activate phone" neither Apple Store Tech or ATT were able to fix this . Any ideas?? TKS Sandro

after unlocking over the phone from ATT and resetting iphone 3gs I keep getting the same error message "could not activate phone" neither Apple Store Tech or ATT were able to fix this .
Itunes displays a message saying "there is no SIM installed in the phone you're trying to activate" even if there is the same SIM that was working minutes before.
The SIM works on a different phone I tested it.
Any ideas?? TKS Sandro

“Could Not Activate EDGE” error message Update ...
Well it’s going on day 6 and still sporadic to no EDGE on my iPhone. At one time, it was thought to be a defective iPhone – since my partner’s iPhone works just fine.
After over three hours on the land line with AT&T and Apple, I was sent to the local Apple store for a replacement. Of course, as soon as I walked into the Apple store my iPhone worked just fine. ;-( The local store replaced my iPhone and suggested I go home and activate the phone as a NEW iPhone, that way if there was a bug in my data it would not carry over to the new phone. Did that and well… still sporadic to no EDGE. By the way, I have the Big White “E” to the right of the 5 bars and AT&T .
AT&T said last week they has “Software” issues in my area, but the CSR I talked to did not know what the issues were or if they were the cause of my problems. He did say they would call me back today to see how my iPhone was doing, but alas, no call back.
When I’m next to my partner, trying to access the same feature, his iPhone is just so fast. Mine hangs up, draws out and finally I get the error message, “Could Not Activate EDGE”. I am updated to version “1.1.4(4A102)”. New (refurbished) iPhone direct from Apple.
I remember reading a while back about some problems others had when they upgraded to from 1.1.3 to 1.1.4. I never had those problems, but it sure looks like they may have started. Does anyone remember what the problems with 1.1.4 were, what was done if anything to correct them, and best of all any suggestions?
By the way, this is Seattle, not some small – out of the way place where connection and signal strength is expected to be second rate. Also, I had full function of my iPhone from the day I bought it in June 2007, all the way up to Thursday March 20, at 2120.
Thanks
Joe

While loading site collection in SharePoint 2010, Error shows "Could not find the file or assembly or one of its dependencies. The system cannot find the file specified."

I have restored one web application in SharePoint Server 2010 from a different domain and can complete successfully. Changed each users domain also to old to new one by using Move-SPUser. But While accessing the site collection it is showing an error
that "Could not load file or assembly 'A##.SP.Intranet, Version=1.0.0.0, Culture=neutral, PublicKeyToken=03b4f320ebedaffc' or one of its dependencies. The system cannot find the file specified."
What may be the reason? Please help me to solve this issue since I am stuck up on this .
Regards
Mine1981

Hi Nico
Martens,
Thank you for your reply. But
how can I find out the custom solutions in the source farm. I didn't got any other details regarding this farm other than WSS_Content, Web application Database, SharePoint_Config database back ups.
Please help me to solve the
issue.
Regards
Mine

TS2529 I am unable to backup my iphone 5 iOS 6.0.1 (connected directly to laptop USB) with my itunes 11 for Win 7 64bits. The process starts and fails to complete giving the error: itunes could not complete backup of iphone because iphone disconnected.

I am unable to backup my iphone 5 iOS 6.0.1 (connected directly to laptop USB) with my itunes 11 for Win 7 64bits. The process starts and fails to complete giving the error: itunes could not complete backup of iphone because iphone disconnected.
I have restarted the PC, the iphone, changed the lightining cable and nothign resolves it: backup never completes.

Hi, I disabled the antivirus and the firewall. Same result
I even deleted the backup folder inside C:\Users\...\Apple Computer\MobileSync\Backup to eliminate any corruption in the old backup files.
Nothing changed: Session either times out or i get the same error message: itunes could not back up iphone because iphone disconnected. It always happens during step 3 out of 4 which is "transfering purchased apps from iphone to PC" and comes after step 2 which is backup.
My iphone 5 is not jailbroken, and is a factory unlocked phone.
Any other suggestion?
Pls help

How to solve the error message "Could not activate cellular data network: PDP authentication failure"when using 3g or gPRS on safari with an iphone 4 and latest software updates

Please can someone help me to solve the error message "Could not activate cellular data network: PDP authentication failure"when using 3G or GPRS on safari with an iphone 4GS and latest software updates. I have tried resetting the network and phone settings. I have restored the factory settings on itunes and still the problem persists.

All iPhones sold in Japan are sold carrier locked and cannot be officially unlocked by the carrier. If you unlocked it, it was by unauthorized means (hacked), and support cannot be given to you in this forum.
Hacked iPhones are subject to countermeasures by Apple, particularly when updating the firmware. It is likely permanently re-locked or permanently disabled.
Message was edited by: modular747

HT4972 After upgrading iPhone 4 to iOS 5.1.1 getting the error "iTunes could not restore the iPhone because the backup was corrupt or not compatible with the iPhone that is being restored" HELP!

I attempted to upgrade my iPhone 4 to iOS 5.1.1. I selected 'back up' from the phone in the device menu and iTunes confirmed that the phone had been backed up. I then installed iOS 5.1.1 which wiped everything on the phone & now I am getting the error "iTunes could not restore the iPhone because the backup was corrupt or not compatible with the iPhone that is being restored".
I have tried restoring factory settings but iTunes simply will not restore from back up & I'm not sure what else to do!
Any advice would be much appreciated.

I have the same issue and I KNOW my backup IS good. What happen is when you try to restore your phone apple says something like can I check for new updates and if you choose no, it just takes you back to the restore screen and a loop from then on. If you dont update from you phone then when you back up you will have the 5.0.1 back up and then when you update to 5.1.1 and then try to restore the backup from 5.0.1 it say it EITHER corrupt or incompatible.. It is incompatible and its hard as **** to restore back to 5.0.1. I followed the restore to a T and still getting errors. I lost all text history and have to reset up email. All just because I wanted a 1.2 Gigs of "other" space back.

Error Message - "could not complete your request because the preset contains invalid data"

I am trying to open a file, and every time I do it comes up with the following error message:
"Could not complete your request because the preset contains invalid data"
I am using Photoshop CS4 on a Macbook Pro running Snow Leopard 10.6.2.
I have tried:
- restarting my mac
- opening different files created at different times
- deleting photoshop from my app folder and the app support folder from my /username/library/application support/adobe/ folder and copied them back from a Time Machine backup from a few days ago.
I was using Photoshop all day today with absolutely no problems. I have searched Google and this forum and have come up short. No one has this exact error anywhere.
Any help? Thanks so much in advance!
Pat Dryburgh

The one thing you didn't do is reset your Photoshop preferences.
Most likely the preferences got corrupted, and reference a corrupt preset.

PO Creation Error - "Price could not be translated to standard currency"

Similar Messages

Maybe you are looking for