PO creator email id for external send

Hi,
When we email POs to vendor from SAP, now it is picking the email id of PO approver as the from address(this is with Dispatch - 4). Is it possible to get PO creator emailid when the POs are emailed from SAP, if we use release process and Dispatch - 4.
Thanks
Bob

Hi All,
Sorry for jumping into this loop, but I need a help from all of you.
I want to send email with PO, but no idea under the case below.
We have 3 LOBs under 1 legal entity, so that the vendor master is shared with 3 LOBs.
Then, a vendor has 2 departments ("A" department and "B" department) as well.
Our 1 LOB want to send PO via email to "A" department in the vendor, however, we don't want to send PO to B department.
On the other hand, the other LOB in our company wants to send PO to "B" department in the vendor, but does not want to send it to "A" department.
This requirement can be handled in SAP?
I would greatly appreciate your advice.
Thanks.

Similar Messages

Exit/Enhancement for External Send

Hi all,
I have a requirement that needs to retrieve the correct email recipient of vendor(this is for PO). A custom output type for External Send is maintained in NACE. The vendor has two email address maintained (one with a note that it is for PO), I can check which email address is correct through tables ADR6 and ADRT. Buts there any exit/enhancement where I can add the logic for this?
Thanks,
Eo

Check enhancement 'LMEDR001' this is the customer exit that would be used for enhancement of the print program check the changing parameter CX_DOC which is of the type MEEIN_PURCHASE_DOC_PRINT which has structure 'MSGPA' which should have address numbers information.
How does that help though? There's no access to the e-mail address - what he's trying to do is set the correct address when multiple ones exist on the vendor.
As I remember, with the PO external send processing, you could only use the default address on the vendor (because of a hard-coded READ in the code), so we use the default e-mail address for PO sends and for other objects such as payment advices (where you can actually pick the e-mail address), we tag the notes with an identifier. I have not revisited this code in ECC 6.0 though.
You can see where the e-mail address is set in function CONVERT_COMM_TYPE_DATA; it uses the old macro calls to set the e-mail recipient which is derived from a simple ADDR_GET call (using the address number). There aren't any exits here but you could use an implicit enhancement to change the values.

Change "SAPScript" email subject/body for External Send(5) for output type?

Hello,
I'm emailing a SAPscript form (converted to PDF) generated via Transmission Medium 5 (External send) for output type (EK00) and need to change email's subject and body of email created by SAP code. Any suggestions on how to change email's subject and body?
Thanks,
Billy

Also if u want to add a body to the mail. See the below form (sub routine) which needs to be mentioned in NACE. Either u can keep this routine in the driver program or u can put in separate report program. All thing u need to is see the below code and mention the name of the program and form name in nace. Double click on output type in nace. u will find a tab stripped screen in right. In the screen u can see the first tab as 'General data' and at the bottom a block with title 'Replacement of text symbols' can be seen. There u need to pass this program name and form name.
Execute ur program and test the result.
FORM text_symbol_replace TABLES pt_lines STRUCTURE tline
                          USING ps_thead STRUCTURE thead
                                ps_nast   STRUCTURE nast.
DATA:
    lv_kunnr LIKE vbak-kunnr,          " AN0465 Add AKKUMA1 02/19/07
    lv_new_cursor_column LIKE sy-tabix," Cursor column
    lv_new_cursor_line   LIKE sy-tabix," Cursor row
    lv_changed,                        " Indicator
    lv_matnr     LIKE vbap-matnr,
    lv_vkorg     LIKE vbak-vkorg,
    lv_vtweg     LIKE vbak-vtweg,
    lv_desc(20),
    lv_name      TYPE thead-tdname,    " Name
    lt_lines     LIKE tline OCCURS 0 WITH HEADER LINE,
    lv_currentprogram LIKE sy-repid.   " Program Name
DATA :
    ps_lines LIKE tline.               " Structure
CONSTANTS:
    lc_int TYPE nast-nacha VALUE '5', " External Send
    lc_comma TYPE c VALUE ','.         " Comma Separater
DATA: BEGIN OF ls_fname,
          dsnam TYPE nast-dsnam,       " Spool Name
          dsuf1 TYPE nast-dsuf1,       " Spool Suffix1
          dsuf2 TYPE nast-dsuf2,       " Spool Suffix 2
        END OF ls_fname.
FIELD-SYMBOLS: <lfs_nast> TYPE vnast.
IF ps_nast-kschl EQ gc_zj17.
Fetching vbak-kunnr.
    SELECT SINGLE kunnr                " Customer
                  vkorg
                  vtweg
             INTO (lv_kunnr,lv_vkorg,
                   lv_vtweg)
             FROM vbak
            WHERE vbeln EQ ps_nast-objky.
    IF sy-subrc EQ 0.
      SELECT SINGLE matnr INTO lv_matnr
       FROM vbap
         WHERE vbeln EQ ps_nast-objky.
    ELSE.
      IMPORT xvbak-kunnr TO lv_kunnr FROM MEMORY ID 'YSOLDTO'.
      IMPORT xvbak-vkorg TO lv_vkorg FROM MEMORY ID 'YSALESORG'.
      IMPORT xvbak-vtweg TO lv_vtweg FROM MEMORY ID 'YDISTCH'.
      IMPORT xvbap-matnr TO lv_matnr FROM MEMORY ID 'YMATERIAL'.
    ENDIF.
    IF sy-subrc EQ 0.
      CONCATENATE lv_matnr lv_vkorg lv_vtweg
       INTO lv_name.
      CALL FUNCTION 'READ_TEXT'
           EXPORTING
                id                      = '0001'
                language                = ps_nast-spras
                name                    = lv_name
                object                  = 'MVKE'
           TABLES
                lines                   = lt_lines
           EXCEPTIONS
                id                      = 1
                language                = 2
                name                    = 3
                not_found               = 4
                object                  = 5
                reference_check         = 6
                wrong_access_to_archive = 7
                OTHERS                  = 8.
      IF sy-subrc = 0.
        CLEAR lv_desc.
        LOOP AT lt_lines.
          CONCATENATE lv_desc lt_lines-tdline
                 INTO lv_desc
            SEPARATED BY space.
        ENDLOOP.                       " LOOP AT lt_desc
        CONDENSE lv_desc.
      ENDIF.
    ENDIF.                            " AN0465 Add AKKUMA1 02/26/07
Fetch Region.
    SELECT SINGLE name1 ort01               " City
      INTO (gv_name1, gv_ort01)
      FROM kna1
      WHERE kunnr EQ lv_kunnr.
    IF sy-subrc EQ 0.
      CONDENSE gv_ort01.
      CONCATENATE ':OC:'
                  gv_name1
                  gv_ort01
                  lv_desc
             INTO ps_lines-tdline SEPARATED BY space.
      LOOP AT pt_lines.
        pt_lines-tdline = ps_lines-tdline.
        MODIFY pt_lines.
        CLEAR pt_lines.
      ENDLOOP.
    ENDIF.                             " IF ps_nast-kschl EQ gc_z..
ENDIF.                               " AN0465 Add AKKUMA1 02/19/07
IF NO TEXT IS PROVIDED READ TEXT USING HEADER INFO
IF pt_lines[] IS INITIAL AND NOT ps_thead IS INITIAL.
    CALL FUNCTION 'READ_TEXT'
         EXPORTING
              id       = ps_thead-tdid
              language = ps_thead-tdspras
              name     = ps_thead-tdname
              object   = ps_thead-tdobject
         TABLES
              lines    = pt_lines
         EXCEPTIONS
              OTHERS   = 1.
    IF sy-subrc NE 0.
    ENDIF.                             " IF sy-subrc NE 0.
ENDIF.                               " IF pt_lines[] IS INITIAL
REPLACE VARIABLES USING DATA FROM PROGRAM   YVADOR01
IF NOT pt_lines[] IS INITIAL.
    lv_currentprogram = 'SAPMV45A'.
    CALL FUNCTION 'TEXT_SYMBOL_REPLACE'
         EXPORTING
              endline = sy-tabix
              header = ps_thead
              program = lv_currentprogram
         IMPORTING
              changed = lv_changed
         TABLES
              lines   = pt_lines.
Subrc Check not required.
    CALL FUNCTION 'FORMAT_TEXTLINES'
         IMPORTING
              new_cursor_column = lv_new_cursor_column
              new_cursor_line   = lv_new_cursor_line
         TABLES
              lines             = pt_lines
         EXCEPTIONS
              OTHERS            = 2.
    IF sy-subrc NE 0.
      EXIT.
    ENDIF.                             " IF sy-subrc NE 0.
ENDIF.                               " IF NOT pt_lines[] IS INITIAL
SPLIT ORDER NUMBER AND PUT THEM INTO SPOOL REQUEST NAME & SUFFIX FIELD
SAP USES THESE FIELDS TO CONSTRUCT FILENAME
FOR THE PDF ATTACHMENT IN EMAIL
IF ps_nast-nacha EQ lc_int OR ps_nast-nacha = '2'.
    IF ps_nast-dsnam IS INITIAL AND ps_nast-dsuf1 IS INITIAL.
      ls_fname = ps_lines-tdline.
      ps_nast-dsnam = ls_fname-dsnam.
      ps_nast-dsuf1 = ls_fname-dsuf1.
      ps_nast-dsuf2 = ls_fname-dsuf2.
    ENDIF.                             " IF ps_nast-dsnam IS INITIAL...
ENDIF.                               " IF ps_nast-nacha EQ lc_int
ENDFORM.                               " TEXT_SYMBOL_REPLACE
Venkat.

Communication strategy missing for external send

Dear all,
I want to send O/Cs via mail, therefore I configured the transmission medium of the output type to "external send". As well I set the communication strategy for mail to the output type. Nevertheless I receive an error, when I want to save the O/C with a new message. Please be so kind and take a look at the attached screenshot. Do you have any idea why the error occurs?
Best regards,
Benjamin

Hi Susan,
Please be so kind and take a look at the SAP-note 2017440 - Communication strategy cleared in message output . In my case this solved the problem.
Best regards,
Benjamin

Disable duplicate email check for external candidate registration

Hi,
I am working with eRecruitment 6.0 and I would like to disable the duplicate email check on the external candidate registration page. Has anyone done this before? I have chased the code down to where it check for correct email syntax but I can't find where it does the duplicate email check. I debugged to where I was starting to see BP type function modules and bapis but I still can't find the check. I just want to turn it off for testing then turn it back on and test more. I have searched OSS and SDN and still no answers. I thought about using an enhancement point to 'ignore' the message but by the point the system has already decided not to create the user so ignoring the message is a mute point.
Anyone been down this road and can point me in the right direction that would be greatly appreciated.
Thanks!

Hola,
Ok a small 'enhancement' to CL_HRRCF_ADDRESS_SERVICE->IS_EMAIL_UNIQUE has done the trick. Not exactly a best practice but will get me through this testing. NO this will not be going to production. This is strictly a test.
Cheers!

HOW to make 2 step Communication strategy for external send

Hi
I have made this 2 step communication strategy and attached to an email output type for purchase order, but it doesn't work as expected.
The 2 steps are 1 INT, 2 = PRT
If the vendor/supplier has an email in the address the purchase order is send by email, but if he has no email addres, then the output fails with message "E-mail address incorrect or non-existent"
I expected the result to be that it would create a print instead of an email.
What is wrong?
Thanks.
Thomas Madsen Nielsen

I found the solution myself.
The communication type PRT = Print is not supported, but LET = Letter will do exactly the same thing.
I found the answer in OSS note 323720.
Thanks

Outlook Add-In Mail Item Address How to get the email address for Receipents & Sender?

Hello,
I am developing an outlook add-in and unable to retrieve the email address from the To,CC,BCC field & the "Sender".
I have written the below code -
//Prepare list of receipients.
List<string> emailIds = new List<string>();
foreach (Outlook.Recipient recipient in mailItem.Recipients)
{ emailIds.Add(recipient.Address); }
emailIds.Add(mailItem.SenderEmailAddress);
In the code above, if the receipient/sender address is saved in the address book, I get the details else "null".
Could someone please help me in fetching the correct email address irrespective of it been saved in the address book or not?
Thanks!
-Vinay Pugalia
If a post answers your question, please click "Mark As Answer" on that post or
"Vote as Helpful".
Web : Inkey Solutions
Blog : My Blog
Email : Vinay Pugalia

Hello Starain,
I am sorry but I do not understand why this is happening as I get proper results.
Coming to the recipient from the address book, I just want to re-confirm what we mean by "recipient
from the address book". By this, I mean that whether my recipient is a contact in the outlook address book or not, I get proper email address.
Please confirm are we on the same page? As other than this, I do not see any difference.
Thanks!
-Vinay Pugalia
If a post answers your question, please click "Mark As Answer" on that post or
"Vote as Helpful".
Web : Inkey Solutions
Blog : My Blog
Email : Vinay Pugalia

Email notification for external third party feed downtime

Hi All,
I have a SOA application consisting of a web service which receives feed from third party system. Normally the third party sends 200 messages a minute. I want to implement a functionality such that if the web service does not receive a single message in 5 minute, it will trigger an email notification to the system admin that the third party data feed could be down. How do I implement this in SOA 11.1.1.4
Thanks

hi Dave,
check this
E-mailing functionality on a process chain
right click on process type that will email if fail/success, 'create message', in next screen maintain the recipient list and subject also body of message
hope this helps.

External send PO email to vendor

Hi experts,
I have one requirement to add additional text in the email content for external send email to vendor, can anyone show me how to do this?
Also, is there anyway to get acknowledgement from vendor when they receive the auto PO email?
Thanks and regards,
JT

HI,
In order to send PO, your Basis team must configure the system first so that external email can be sending out from SAP. If it is not configured, no settings you do on MM will work.
1. You must maintain email address in vendor master data.
2. The same applies to your user master data. For the output type for default values, a communication strategy needs to be maintained in the Customizing that supports the e-mail. You can find the definition of the communication strategy in the Customizing via the following path:
(SPRO -> IMG -> SAP Web Application Server -> Basic Services -> Message Control -> Define Communication Strategy).
As a default, communication strategy CS01 is delivered. This already contains the necessary entry for the external communication. Bear in mind that without a suitable communication strategy it is not possible to communicate with a partner via Medium 5 (external sending).
3. Use the standard SAP environment (program 'SAPFM06P', FORM routine 'ENTRY_NEU' and form 'MEDRUCK') as the processing routines.
4. In the condition records for the output type (for example, Transaction MN04), use medium '5' (External send).
5. You can use Transaction SCOT to trigger the output manually. The prerequisite for a correct sending is that the node is set correctly. This is not described here, but it must have already been carried out.
6. To be able to display, for example, the e-mail in Outlook, enter PDF as the format in the node.
try this link
Re: Email PO's
Hope Help U !
Regards,
Pardeep Malik

External Send Billing Document - Issues Generating Body Text in Email

Have generated output type to email billing document as PDF to customer. I am using medium 5 for 'External Send' and have everything working well - the subject line is correctly showing the company name and invoice number, also the PDF is tagged correctly the same data. The issue I am having is trying to incorporate body text in the email itself. I found OSS note 753622, and it indicates this is not possible but the note is quite old. I have combed internet for solutions on this, and many suggestions seem to point to function module CONVERT_OTF_AND_MAIL but not clear to me that this can be overcome here. Would appreciate any insights if someone has experienced this requirement as well.
Thanks,
Jay

Jason,
The FM you mentioned CONVERT_OTF_AND_MAIL is only for converting the OTF format to the email format. It has no other role in displaying some texts in the email.
As already pointed out, it is not possible in standard SAP. You have to go for the custom code in the report program meant for the output type.
This is the widely accepted and used practice in output world.
Hope this helps you

Hello Guru's reg IMG settings for output det of PO External Send

Hello Gurus,
While configuring output determination Medium for External Send At Message Type Purchase order step in IMG Settings, I need to configure the following settings
Program, routine, form
I have Output type: Neu ( for Purchase orders)
Application: EF Purchase Order
Medium----External Send
Program:?????
Routine:
Form:
What is the the program name, routine Name and Form, should I select from the drop down bar. There is no description for the SAP STD program for External Send mode will anyone guide me.
Full points for the answer

HI,
You can get some idea by clicking this.
http://help.sap.com/erp2005_ehp_03/helpdata/EN/75/ee122c55
c811d189900000e8322d00/frameset.htm
regards

Problem with the External send output for Portugal in Smartforms

Hello All,
I am facing an issue with a particular outtype for external send for portugal country.The print priview is of different font than original font of the form.
But When the same output type is assigned with the print output the form is showing the font with the original fonts of the form.
can any one suggest the solution for this?

Hello ,
Actually the same external send output type is working fine in the development system.This is having issue only in quality system.
And the condition records are maintained same in both dev system and quality system.
Does the capturing of Font play any Role...
I read some where that sometimes in translations a particular coutry might not hold the fonts.
Regards,
Varun

Output type not accepting Comm method 5 - External send

Hi
not sure whether this should be posted on the Abap forum or on here ???
I have a shipping output type.
assigned Partner functions and applicable mediums - 1, 2 and 5
however when trying to produce ooutput via comm method 5, external send, i am gettting red error messages/ traffic ligh
processing log is as follows:-
"processing log for program xxxxxxxx routine ENTRY
Please enter an address number
communication type cannot be used"
all outputs for medium types 2 Fax and 1 print are all OK for all Partner functions involved
please could someone provide our Abapper with the missing coding that is needed to accomodate the External send functionality
Many thanks for your help on this matter
Tony

Tony
Check if you have done the following:
1) Maintained Email address in the customer master data?
2) Maintained Email address in the user master data, this could be the generic/batch user you use for outputs.
3) Set up communication strategy in config for external sending: SPRO/IMG/Sales and Distribution/Basic Functions/Output Control/Determine Communication Strategy.
4) Set up settings for SAPconnect using SCOT?
Please follow the following OSS notes for more details and ensure that you have done all those steps:
454893 - CHECKLISTSD: Sales document output as an e-mail
960088 - FAQ: Sending SD messages externally
Let me know how it goes.

How to pass contents in email body for output type medium external send

Hi ,
In my requirement i am send attachment to external send using open_form function module with email content blank,So now my requirement is add 2 to 3 line email content should come in external mail with attachment through open_form function module for that any one can help me if faced this kind of object it will be very help full for me.
Thanks,

Hi,
Is your solution using DEVICE = 'MAIL' when calling OPEN_FORM? If yes, please read through OSS Note 311037 - Printing using e-mail. You should be able to define up to 10 lines, as a static cover page for printouts sent via mail (I have not verified if this works). If that doesn't suffice, you are out of luck, I'm afraid. You'd be better off sorting out the otf to pdf conversion problem.
Edit in: alternatively, you could of course try to extend FM SO_OBJECT_SEND via implicit enhancement... All you really need to do there is to populate the table NOTE_TEXT, which will then get converted into e-mail body Create a singleton to hold text, set text in in the driver program before open_form, get it in the implicit enhancement at the beginning of SO_OBJECT_SEND, and, if note_text is empty, take over your text and clear the singleton instance...
cheers
Janis
Message was edited by: Jānis B

How to define output types email or external send in the report program

Hi all,
now we are using a zprogram for output type printer and standard program RVADOR01 for output type external send. Now i want to modify my zprogram itself to support external send email as well as printer also. What modifications should I have to make in my zprogram. My form is a script.
Thank you,
Mallik

hi all,
i made the following changes in my code and it worked well.
thank you for all who tried to share my pain.
thanks one and all.
hope this code will help anybode.
thanks & regards
FORM OPEN_FORM_EMAIL.
TABLES: TNAPR,                         "Programs & Forms
        ITCPO,                         "Communicationarea for Spool
        ARC_PARAMS,                    "Archive parameters
        TOA_DARA,                      "Archive parameters
        ADDR_KEY.                      "Adressnumber for ADDRESS
TYPE-POOLS SZADR.
DATA: LVF_DEVICE LIKE ITCPP-TDDEVICE,
      LVF_DIALOG(1)     TYPE   C   VALUE ' ',
      LVS_RECIPIENT     LIKE   SWOTOBJID,
      LVS_SENDER        LIKE   SWOTOBJID,
      LVS_SNAST         TYPE   SNAST,
      LVF_PROGRAM       LIKE   SY-REPID,
      LVS_COMM_TYPE     TYPE   AD_COMM,
      LVS_COMM_VALUES   TYPE   SZADR_COMM_VALUES,
      LVS_TITLE LIKE SNAST-TDCOVTITLE.
reset return code
RETCODE = 0.
if there is a communication strategy used ...
IF NOT NAST-TCODE IS INITIAL AND NAST-NACHA EQ '5'.
... use stratagy to get communication type
    CALL FUNCTION 'ADDR_GET_NEXT_COMM_TYPE'
         EXPORTING
              STRATEGY           = NAST-TCODE
            ADDRESS_TYPE       =
             ADDRESS_NUMBER     = KNA1-ADRNR
            PERSON_NUMBER      = VBDKA-ADRNP
              PERSON_NUMBER      = ADDR_KEY-PERSNUMBER
         IMPORTING
              COMM_TYPE          = LVS_COMM_TYPE
              COMM_VALUES        = LVS_COMM_VALUES
       TABLES
            STRATEGY_TABLE     =
         EXCEPTIONS
              ADDRESS_NOT_EXIST = 1
              PERSON_NOT_EXIST   = 2
              NO_COMM_TYPE_FOUND = 3
              INTERNAL_ERROR     = 4
              PARAMETER_ERROR    = 5
              OTHERS             = 6.
    IF SY-SUBRC <> 0.
      RETCODE = SY-SUBRC.
      SYST-MSGTY = 'E'.
      PERFORM PROTOCOL_UPDATE.
    ENDIF.
ENDIF.
   LVS_COMM_TYPE = 'INT'.
CLEAR LVS_COMM_VALUES-ADSMTP-SMTP_ADDR.
CLEAR LVS_SNAST.
        LVS_COMM_VALUES-ADSMTP-SMTP_ADDR = V_CUST_EMAIL.
convert communication data
   MOVE-CORRESPONDING NAST TO LVS_SNAST.
        LVS_SNAST-ANZAL = 1.
        LVS_TITLE = 'Mail Header Title'.
MOVE LVS_TITLE TO LVS_SNAST-TDCOVTITLE.
   MOVE SY-REPID TO LVF_PROGRAM.
CALL FUNCTION 'CONVERT_COMM_TYPE_DATA'
       EXPORTING
            PI_COMM_TYPE              = 'INT'
            PI_COMM_VALUES            = LVS_COMM_VALUES
            PI_SCREEN                 = XSCREEN
          PI_NEWID                  =
            PI_COUNTRY                = ADRC-COUNTRY
            PI_REPID                  = SY-REPID
            PI_SNAST                  = LVS_SNAST
            PI_MAIL_SENDER            = SY-UNAME
       IMPORTING
            PE_ITCPO                  = ITCPO_LS
            PE_DEVICE                 = LVF_DEVICE
            PE_MAIL_RECIPIENT         = LVS_RECIPIENT
            PE_MAIL_SENDER            = LVS_SENDER
       EXCEPTIONS
            COMM_TYPE_NOT_SUPPORTED   = 1
            RECIPIENT_CREATION_FAILED = 2
            SENDER_CREATION_FAILED    = 3
            OTHERS                    = 4.
IF SY-SUBRC <> 0.
    RETCODE = SY-SUBRC.
    SYST-MSGTY = 'E'.
    PERFORM PROTOCOL_UPDATE.
ENDIF.
CHECK RETCODE EQ 0.
fill structure itcpo
ITCPO = ITCPO_LS.
open form
CALL FUNCTION 'OPEN_FORM'
       EXPORTING
          APPLICATION        = 'TX'
           ARCHIVE_INDEX      = TOA_DARA
           ARCHIVE_PARAMS     = ARC_PARAMS
            DEVICE             = 'MAIL'
            DIALOG             = 'X'
            FORM               = 'ZSDLS003'
            LANGUAGE           = SY-LANGU
            OPTIONS            = ITCPO_LS
            MAIL_SENDER        = LVS_SENDER
            MAIL_RECIPIENT     = LVS_RECIPIENT
          MAIL_APPL_OBJECT   = ' '
          RAW_DATA_INTERFACE = '*'
     IMPORTING
          LANGUAGE           =
          NEW_ARCHIVE_PARAMS =
          RESULT             =
       EXCEPTIONS
            CANCELED           = 1
            DEVICE             = 2
            FORM               = 3
            OPTIONS            = 4
            UNCLOSED           = 5
            MAIL_OPTIONS       = 6
            ARCHIVE_ERROR      = 7
            OTHERS             = 8.
IF SY-SUBRC NE 0.
    CASE SY-SUBRC.
      WHEN 7.
        RETCODE = SY-SUBRC.
        SYST-MSGID = 'VN'.
        SYST-MSGNO = '096'.
        SYST-MSGTY = 'E'.
        SYST-MSGV1 = NAST-KSCHL.
        SYST-MSGV2 = NAST-KAPPL.
        PERFORM PROTOCOL_UPDATE.
      WHEN OTHERS.
        RETCODE = SY-SUBRC.
        PERFORM PROTOCOL_UPDATE.
    ENDCASE.
ENDIF.
SET COUNTRY ADRC-COUNTRY.
ENDFORM.

PO creator email id for external send

Similar Messages

Maybe you are looking for