PO_CUSTOM_PKG - Error message not appearing while creating dist line

Hi,
We are trying to incorporate business logic using the POR_CUSTOM_PKG. Where as we have a requirement to add custom validations at the time of defaulting the requisition distributions. We are using PROCEDURE custom_default_req_dist for this purpose. however if any validation fails we need to display error message and we are not able to see the error message even after setting the result_code t0 2
Can someone let us know what may be the problem or how to resolve this?
Thanks
Venkatesh

Hi,
You need to use "custom_validate_req_dist" procedure in order to perform any validation in the requisition distributions data in iProcurement and display appropriate error messages.
Thanks,
PS.

Similar Messages

Error : Modification not possible- while creating source system in BI7

Hi BI Guru's,
We are using BI7 and source system ECC6 ,We are about to move to production, When creating the source system in BI PRD system we getting the Error Modification not possible.we created RFC connection, background user and remote connection works fine.
Is there any body put some light on this issue
thanks in advance,
Regards,
Mohan

Mohan,
Check if your logical systems are in place in SCC4 and also in the transport connection.
Also check if you are connecting to the source system by IP Address or by logical name.
Accordingly you would have to maintain the source system connections.
Arun

Create Asset Master Button does not appear while creating SC.

Dear Friends,
We are working on SRM 5 and trying SSP with classic scenario. The issue is while creating Shopping cart for account assignment Asset, system does not display Create Asset Master button.
We have maintained following configuration in our SRM system.
1.     The authorizations object M_BBP_*** is setup and activated for Employee creating shopping cart as well as RFC user.
2.     Attribute Asset Class (ANK) is maintained in Organization structure as per Backend asset class
3.     Attribute Account Assignment Category (KNT) is maintained for Asset in Organization structure
4.     GL account for product category and account assignment is maintained
Still while creating Shopping cart for Account assignment Asset system does not display button Create Asset Master.
Any idea which setting I am missing?
In R/3 I am able to create Asset master while creating Purchase Requisition.
Regards,
Sandeep Parab

Hi
<u><b>Please go through this -></b></u>
http://help.sap.com/saphelp_srm50/helpdata/en/03/340ff8a5c711d4b2d8000102ade1c8/frameset.htm
Asset Procurement in EBP
Re: Asset number creation in EBP ?
Asset Procurement in SRM 5.0
Re: Cost center in asset item
Note 492107 - Account assignment with asset (changes in EBP)
Note 492073 - Account assignment to asset when creating a shopping basket
Note 897843 - Mixed account assignment types with asset in extended PO
Note 732374 - No default values from attributes for account assignment
Note 921767 - Default settings: Account assignment data is blank in ECS
Note 588898 - Additional documentation for SAP Enterprise Buyer 3.0
Note 575654 - Additional documentation for SAP Enterprise Buyer 3.5
Note 750381 - Asset master number is not transferred from details (2)
Note 674802 - Asset master number is not transferred from details
Note 484020 - No Asset Class Description when creating asset master
Note 936541 - Subsequent note to Note 543055
Note 613671 - RAISE COMPANY_CODE_NOT_VALID with enclosure creation
Note 455124 - Error message on unavailable asset class
Note 579900 - Account assgnmnt screen 2000: asset class transltd incrrctly
Note 399377 - EBP transfer of the asset text via EBP (as of Release 4.5)
Note 493512 - EBP: Message 197 (BBP_PD) not displayed by system
Note 423307 - Messages (BBP_PD) 193/194/195/197/202 translated incorrectly
Note 202684 - No derived account asgnmnt information frm back end
Regards
- Atul

Shipping data tab not appearing while creating intercomapny STO PO

Hi all,
I am processing the intercompany stock transfer scenario. I have done all the necessary settings for the plant and intercompany billing, but while creating the purchase order I am unable to get the shipping tab as the system cant read the shipping data for the respective vendor. In turn I cant see the purchase order in VL10B.
Kindly help in this.

Hi,
1. Please check in your vendor master in T-code XK03
2. In vendor master , the plant might have defined as plant as vendor in Tab purchasing data > Extras >additional purchasing data,
3.If plant field is not appearing there then change plant field in vendor account group field status maintenance from suppress to optional & maintain in vendor master.
Regards,
Ajit

Technical System not appearing while creating Business System

Hi
We had already created business system and assigned a technical system and all the interfaces was working fine.
Now we removed the technical system and created a new technical system, since we need to point to different server.
I created a new technical system, oped the old business system and in integration tab, when i click on change technical system.
The newly created technical system is not appearing.
Thought of assigning the business system directly in technical system, but it is not allowing and i am getting message business system is already assigned.
Can you pls help
Regards
Madhan D

Hi Madhan,
When you create a Business System, it will ask for the type of Technical system like Web AS ABAP, Web AS Java etc.
So, the new TS type should match the TS type you selected for your BS so that you can see your TS in the dropdown, when you click on "Change" link.
HTH,
GP

Error message I need while creating PO

Dear Experts.
I need to set error message when we try to convert deleted purchase requisation into Purcahse order.
Pls can any one help how to set.
Thanks in advance,
With Rgds,
Vinod

Try setting the message 06 050 Purchase requisition & item & already deleted to an "E" in the purchasing system messages in the SPRO path Materials Management -> Purchasing -> Environment Data -> Define Attributes of System Messages and then choose System messages.
Hope this helps.

I am trying to install Indesign 2014 but am not able to complete it because an error message (EX11) appeats while extracting

I am trying to install Indesign 2014 but am not able to complete it because an error message (EX11) appears while extracting

Without system info and other details nobody can tell you much. This simply means that you run out of (temporary) disk space, maybe because the drive is really full, maybe because you have insufficient user privileges...
Mylenium

Getting error 'Item 00000 does not exist' while creating a salse order

Hi All,
We are facing an issue, we get an error message saying 'Item 00000 does not exist' while creating a sales order for a particular order type, we do not get this problem with all the materials, only a few of them and the materials which give a problem are part of the supersession chain. The problem is not even coming for all the superseded materials.
This problem is occuring with none of the other order types but just one. We have compared the configuration for the order types for which this error is not coming and the order type which is giving the problem, and its exactly the same.
When creating the sales order through VA01 even though the error message comes, but on hitting the enter button the processing goes further. But when creating the sales order through the background program the processing stops the moment the error message comes and the Sales Order does not get created.
Your valuable suggestions for helping us resolving this issue will be highly appreciated.
Regards,
Geeta

HI Geeta
As per your post "Problem is when you are executing VA01 in background sales orders are not generating due to error message".
Apart from configuration check alternative is "Take ABAPer's help and change this error message type to warning/information message type in the system". With warning/information message type you could be able to create sales orders in background also.
try and revert

Message Servers not appearing when creating JCO Destination

Hello Experts,
I had created a System Object in the Portal system landscape based on System Template (Template) and choosed SAP system with load balancing (to connect to R/3 server).
Given parameters to Connector, ITS, WAS and User management, when i test the connection test on these settings, All are successful except the connector settings. but when run the transaction code(System Administration -> support-> portal runtime-> SAP Transaction) by selecting this message server, it is executing.
And i want this message server to be selected when creating JCO destination.
This System Object is not showing in the message servers dropdown box selection when creating the JCO destinations.
What may be the issue.
Could anyone help me in solving this.
Thanks in advance
Regards
Sunil

Hi,
Have you checked the Technical systems in the SLD ? When you click on check sld , you appear an SLD url ,,,
Typing the same URL in browser and loging inwith SLD USER .... have you seen all the technical system which you want to appear while creating the JCO's ..
Regards,
Srini

In iCal - I keep getting the error message " This calendar was created by Mail" and it will not accept any input; why..??

In iCal - I keep getting the error message “ This calendar was created by Mail” and it will not accept any input; why..??

use Disk Utility and Verify Permisions then fix and Verify Disk and fix, this should fix it.

I've tried to update my ipad 2 with IOs 6 but it was not possible. An error message always appear after some time during e download. Is there an solution?

I've tried to update my ipad 2 with IOs 6 but it was not possible. An error message always appear after some time during e download. Is there an solution?

Are you trying to update via wifi or connected to your computer?
 Cheers, Tom

Error message:printhead appears to be missing, not detected, incorrectly installed or incompatible

new error message: "printhead appears to be missing, not detected, incorrectly installed or incompatible". I already tried restarting several times and have uninstalled and reinstalled all of the ink cartridges. Still receive same error mesage.

Hey walter,
I would advise performing the steps in the document linked below that addresses the printhead failure message you are receiving in this printer model. Let me know how these steps go.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02899429&tmp_task=solveCategory&cc=us&dlc=en&lc...
I hope this helps,
Jason
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------
I am not an HP employee.

TS2776 An error message keeps appearing when I have I tunes open, saying could not complete request. Any similar problems or ideas to resolve?

An error message keeps appearing when I have I tunes open, saying could not complete request. Any similar problems or ideas to resolve?

Also I now can`t access any of my itunes library and am concerned that if I remove it from my computer I will lose everything as I have no option of accessing and therefore backing anything up. Any ideas?

"Error in source system" while creating source system

Hello,
I don't know what's our general problem (I suppose that it's ageneral problem) but we always have the following eror while creating a source system:
When we want to create a source system on BI, we first get an error "No connection to source system possible". After checking the RFC connection and correct the password of the remote user on the automatically created _DIALOG RFC connection the exception changes to "Error in source system".
The error occurs after the information "Please log on as an administrator in the following screen".
The remote user on R/3 side has got profiles S_BI-WHM_RFC and S_BI-WX_RFC (found two conflicting statements regarding this profiles), on BI side it has got SAP_ALL and some more profiles
What else could be the problem?
Greetings & Thanks
Bettina

Hello,
now we know that
1. the remote user needs profiles SAP_ALL and SAP_NEW and has to be dialog user with a password unequal that password it should have in the future (otherwise you don't see the error messages that appear during the login process)
2. the system has to be changeable (scc4 and se03)
After the source system is created the changeability can be changed to the original values and the remote user can be changed to a communication user again.
Thanks for the tip regarding the authorizations.
Greetings
Bettina

Error message when trying to create a unique name

Why do I keep getting an Error message when trying to create a unique name for a location on your site. I am simply looking to use your free 2GB space to store some pics and vids but keep getting an error message.

How come Leopard let me use the WGM in standard mode?
While SA complains that it won't work in Standard Configuration, WGM does not. There is some fault in the logic of this for which I don't have an explanation.
If I want to get control on Dock, selection of Home folder, config of Proxy... which I think are basic things, do I really need the advanced mode?
If you wish to have complete control of all client settings, yes. There really is no disadvantage of using an Advanced configuration other than the learning curve.
So if I switch to advanced mode, there is good chance I won't get this error message anymore, right?
Yes.

PO_CUSTOM_PKG - Error message not appearing while creating dist line

Similar Messages

Maybe you are looking for