PO date and Omaterial should display in the ascending order

Hi experts,
When i excute the rep0rt the POdate and Material is not displaying in asending order, based on this order am caluculating some other key feild.
Back ground this was a Function Module datasource whichwas extraced into BI , Until PSA am getting the values correct. But from Cube the materilal and Podate are not in sequence. How to make these 2 in order. In reporting is there any setting, i tried to display in ascending order in query properties this not makign any change.
          POdate            Material
Ex: - 01-0102010   4010100010
        02-01-2010    40101000020
Regards,
singam.v

Hi,
Please check "Sorting" options in Query Designer. They are defined for each characteristic placed at rows or columns.
You can sort according to keys (InfoObject Primary Keys) or Name/Description (InfoObject Texts). Perhaps the query is sorting but according to a criterion which is different from what it is expected.
Another thing to take into account is the order in which columns are placed. Sorting order is defined from left to right.
For example, if the first column is 0CALDAY and the second is 0MATERIAL, the query first sorts by date and if there are records with the same date, it sorts according to material, and so forth.
I hope this helps you.
Regards,
Maximiliano

Similar Messages

In recrutiment in letters default data and time should come

Dear Group
Here i am have a problem that my client whats interview date and time should be disployed in letters.
But for this i want to enhance 2 fields in costome infotype but the abapr is saying that this cannot be done .because these r not appearing in pb50and pb60.so kindly tell me any way so how can i get the date and time displayed

see in so10 we have maintained letters but in interview invitation letter interview date and time should come.so for this we r maintaing in custom infotye9xxx so it has to pick that time and date from this infotye and it should display in this letter .

Data is not getting displayed in the report from an Infoset.

Hi All,
I am having a report based on an infoset. This report is displaying the data in the Dev. envmt. When it is transported to the QA, it is not displaying the data in the BEx as well as RSRT, in the QA envmt. The patch levels of both the Dev. and QA are the same. The Queries are same in the Dev and QA also.
While trying to display the data from the infoset (rt.click- display data), i am able to view the data, in the QA.
Could anyone please suggest why the data is not getting displayed in the query designer.
Thanks & Regards,
A.V.N.Rao

Hi Ashish,
I ran the "ZPS/!ZPS" in RSRT where ZPS is the infoset name. In Dev, it displayed the values. In QA, it displayed the below messages:
ECharacteristic 0TCAKYFNM does not exist. Check authorizations
WThere are calculated elements. These results are bracketed [ ]
and below that, it displayed the values for Number of records. But, it has not displayed the values for the other figures.
Does this has any impact in QA.
Thanks & Regards,
AVN Rao.

How can I get my safari 5.1.10 to download the java update so I won't continue to get notices that my browser is out of date and I need to download the update, which then won't download. Cannot view anything in youtube or most other places.

Jeez. Trying to view items in youtube. I keep getting a blacked out picture telling me my browser is out of date and I need to download the update. I do that and then it doesn't connect so I'm back at square one.

Hi MiMattheMac, you probably won't have any problems but just be aware upgrading from Snow Leopard to anything later is a big leap. Old, PowerPC - only programs won't work, for example, and even more recently developed programs won't work if their developers have not been updating them for recent OS X versions.
If you haven't made a backup of your Mac yet, and you consider the information on it important, please consider doing that. It is the only practicable way to "undo" an OS X upgrade should you want to. Merely having a backup seems to preclude the need to ever use it.
If the information on your Mac is not important to you, upgrading to Mavericks is even easier since you can completely erase the Mac first.
In any event let the download complete.
If this raises any concerns about installing it, and you need to ask questions to alleviate those concerns, you can just close this window when it eventually appears:
The 5 GB downloaded file will not be deleted and will remain available until you actually install Mavericks. You can do that at any time convenient for you.

How do I store 4 hours of data and get it out of the "while loop" into a spreadsheet file for documenting purposes? "See additional Text for additonal info"

What a have is a VI that uses the following SUbvi's, starts with FP OpenVI, then FP Create TagVI, into a "While Loop" which contains a FP ReadVI outputting data into a Index ArrayVI outputting to a Display (DBL). This shows the output of a FP-AI-100 monitoring a 9v battery. I have to monitor this battery for a 4 hour period my problem is storing the 4 hours of data and getting it out of the "while loop" into a "Write to Spreadsheet File VI" all I seem to accomplish is just one data sample which I get into a spreed ship file with no problem. I just can't get 4 hours worth. By the way this is my first VI and I'm self
trained so have mercy.

I figured it out thanks.
John Morris
Glendinning Marine

How do I store 4 hours of data and get them out of the "while loop" into a spreadsheet file for documenting purposes? "See additional Text for additonal info"

What a have is a VI that uses the following SUbvi's, starts with FP OPENvi, then FP Create Tagvi, into a "While Loop" which contains a FP READvi outputting data into a INDEX ARRAYvi outputting to a Display (DBL). This shows the output of a FP-AI-100 monitoring a 9v battery. I have to monitor this battery for a 4 hour period my problem is storing the 4 hours of data and getting it out of the "while loop" into a "Write to Spreadsheet File vi" all I seem to accomplish is just one data sample which I get into a spreed ship file with no problem. I just can't get 4 hours worth. By the way this is my first VI and I'm sel
f trained so have mercy.

I figured it out Thanks.
John Morris
Glendinning Marine

Date and version should be generating by

Hello All,
We are also using with IBM websphere portal in our environment.
But this is a Linux question than a product.
For our routine deployment we are doing export/import.
I want to run export by script for both source and target.
Regardless of how many time I run the same script I want export file will be generated by name,date and version #.
First time script will create source_fulltest20091215_1.xml,
if user runs scripts again it will create the name as source_fulltest20091215_2.xml.
Third time script will generates file name as source_fulltest20091215_3.xml
Please notice name of the file its increment by number.
Below is a general format of the script,
if I run exactly same script it will create the file called ‘source_fulltest20091215_1.xml”.
./xmlaccess.sh -in exportBase.xml -out source_fulltest20091215_1.xml -url http://hostname:port#/wps/config -user svc_wpsadmin -password 'helloworld'.
I want date and version should be generating by auto script.
Thanks

Review the output formatting of the date(1) command:
$ man dateand use it to compose part of the filename:
fn=fulltest$(date '+%Y%m%d%H%M')The version number is a bit tricky, there are so many choices about how to do it. One way, assuming you just want the filenames to be unique is to:
if [ -f ${fn} ]; then
   seqno=1
   while [ -f ${fn}_${seqno} ]; do
        seqno=$(expr ${seqno} + 1)
   done
   fn="${fn}_${seqno}"
fiThere are more succinct ways of expressing this, but this way will work everywhere.

My Macbook pro was stolen 09/12, the police just returned it to me. I want to remove all the data and start over. Format the drive's etc. I have windows 7 on 1 partion and mountain lion OSX on the apple partition. How is the best way to do this?

My Macbook pro was stolen 09/12, the police just returned it to me. I want to remove all the data and start over. Format the drive's etc. I have windows 7 on 1 partion and mountain lion OSX on the apple partition. How is the best way to do this?

Have a look here...
what-to-do-when-your-hard-drive-is-full.html

Cisco SPA525g2 Date and time Not Synced with the PBX server

Hello,
We have a couple of SPA525g2 phone connected and registered to our PBX server. We were able to configure 3 extensions on different lines of the phone. However, at times we were encountering issues with the other lines configured on the phone. There are times wherein 1 extension configured on the phone is having one way audio issue, but the other extensions configured on the same phone is working fine. and we have to reboot/reset the phone several times for all the extesions configured on the phone to work.
Also, whenever we reset the phone, the date and time will be way way behind the current date and time, eventhough we have already set the correct date and time before we reset the phone.
How can we resolve the one way audio issue on 1 or 2 extensions of the phone, while the other extensions configured to it is working fine?
How can we make the phone sync the date and time with the PBx server?
Any input and help regarding this issue is greatly appreciated...
Btw, date and time issue not sync with the PBX server is just happening on SPA525g2, we have other phones like SPA303, SPA504, and SPA232D/SPA302D. All other phones' date and time is in sync with the server even though we reset them except SPA525g2.
Thank you very much,

PeterMacSF,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://forums.novell.com/

Get date AND time to show in the menu bar

What is that technique to get date AND time to show in the menu bar please?

Install iStat Menu
System Preferences -> iStat Menus -> Date & Time
\[X] Show Date & Time
Format .... \[Edit]
(*) Custom (drag tokens to build a custom format)
Drag a light blue token into the edit line below the token selections. If you want a space a colon a dash, etc... just type that character(s) before after draging a token into place.
I created: 9:35 PM Sat 1-Aug-2009
You can create anything you like in any order you like.
The other alternative (if you happen to be a fan of the Unix strftime() function) would be to use the % formatting characters in the Expert time format expression box. Use the Terminal "man strftime" to find out all the available % formatting codes.
But I think the Custom Drag & Drop section is the easiest to use.
However, if this doesn't work for you, then I guess it is just a case of "Your Mileage May Vary".

I think my ipad is spoiled when ever I want to download something it says my account is not available in the store and I should switch of the ghanian shop but I live in cloumbus Ohio please help am also a ghanian I hope this has nothin to do with that

I think my ipad is spoiled because it says my account is not available in the store and I should switch off the ghanian store but I live in the us cloumbus Ohio but I am ghanian I hope it has nothing to do with it please help

Your iPad is not spoiled; just change back to your original app store.
Change App Store
1. Tap "Settings"
2. Tap "iTunes & App Stores"
3. Tap on your Apple ID
4.Tap "View Apple ID"
5. Enter your user name and password.
6. Tap "Country/Region."
7. Tap "Change Country/Region"
8. Select the region where you are located.
9. Tap "Done".

I am trying to locate an email that I deleted and assume should be in the trash. However my trash now only goes back a few days - how can I increase the number of days the trash remains accessible for

I am trying to locate an email that I deleted and assume should be in the trash. However my trash now only goes back a few days - how can I increase the number of days the trash remains accessible for.

StevieJ wrote:
I am trying to locate an email that I deleted and assume should be in the trash. However my trash now only goes back a few days - how can I increase the number of days the trash remains accessible for.
Check Mail Preferences, Accounts tab. Select the account, then the Mailbox Behaviors tab. See if you have it set to Permanently erase deleted messages when: One week old. (or less)

When the image is uploaded on the server and it is displayed on the web pag

Dear frenz,
How the image is uploaded on the server which is at the specifiecd URL and it is displayed on the web page?
Regards,
Jasmeen

it is as simple as doing with a java program .Just place the image file inside your webapps folder and the rest will be done by webserver.

JPG files copied to Philips Picopix 3410 are currupted with a prefix of ._ and will not display on the PicoPix

JPG files copied to Philips Picopix 3410 are currupted with a prefix of ._ and will not display on the PicoPix. Help please?

There are a couple of ways to remove these items from the drive.
One is with the $15 shareware app, BlueHarvest. It will remove the AppleDouble files from the drives you want the ._ files removed from, and has an option to prevent them from being written to non Apple formatted drives in the first place.
But the free and pretty easy way to do it is to use Terminal. From what I can see in the manual for your projector, you can only get images to it on either an SD card or a USB flash drive. So I'm going to assume a USB drive for the following.
Plug in your MS-DOS formatted drive so it appears on the Mac desktop. Open Terminal and enter:
dot_clean -m
Enter a space after the -m . Then drag and drop the icon of your flash drive into the Terminal window. It will fill in the path of the drive. Press Enter. All ._ files will be removed from that volume.
Actually, I think it removes all files that start with a period. None of which are of any great importance on a DOS formatted drive. Such as the hidden trash for that drive. The next time you plug the drive in, OS X will simply recreate it.

So my iphoto is set up with a different apple account from my current one... the email on the old account is out of date and i do not know the password for it. my copmuter will not let me update my iPhoto nor will my old email account allow me to accessit

so my iphoto is set up with a different apple account from my current one... the email on the old account is out of date and i do not know the password for it. my copmuter will not let me update my iPhoto nor will my old email account allow me to accessit

Did you try this Apple website regarding your old Apple ID and its password: Apple ID: If you forget your password
OT

PO date and Omaterial should display in the ascending order

Similar Messages

Maybe you are looking for