PO delete in 3rd party SO

Hi,
There will be a PO followed 3rd party SO, when the PO is deleted, why the document flow is not updated?
because the sold to party need be changed, so to delete PO first, but it seems still not work because the system message is there is subsequent document through PO is deleted.
Anyone could help? thanks.

Hi,
Normally, when a third party sales order is created, a purchase requisition will be created. And based on this purchasing department creates a PO.
So when you delete (setting deletion indicator in the PO) the PO, still purchase requisition exists. You must set the deletion indicator for  the purchase requisition line items also. Then you can make changes in sales order.
Regards

Similar Messages

  • If I delete preinstalled 3rd party software on MacBook air, how can I recover it?

    If I delete preinstalled 3rd party software (e.g. MS Office) on MacBook air, how could I recover it?
    The software reinstall drive only has OSX, iLife?

    Might try:
    Word->File->Open Recent

  • How can I reset my MacBook Air to factory settings that will delete all 3rd party apps and wont delete my data and iLife apps?, How can I reset my MacBook Air to factory settings that will delete all 3rd party apps and wont delete my data and iLife apps?

    I gave my MacBook Air to a person to use for a while, and now I got it back. I want it to be good as new before I start using it properly. Its okay if I lose data but I dont want to lose the Apps that were onboard. I want to start all over again.
    Thanks

    Assuming you don't have a Time Machine backup before you lent your MacBook out, then you've a few choices.
    If you want to set it back to the day you got it, then if it's Snow Leopard, use the micro USB stick that came with your Mac and after boot from it ( hold the Option key on startup) select the USB stick and when booted from it, go to Disk Utility and reformat the HD then install SL. when it's done and started in 10.6, select the install Applications from the USB stick, then your back with iLife apps etc.
    If Lion, restart from the Recovery Partition as per the instructions above except you don't need anything plugged into the Mac, select Recovery and again DU erase and install Lion. once Lion is installed the iLife apps will be available to download from the App store as your MacBook will be recognised as coming with these apps.
    WARNING, both these methods remove ALL user data

  • Deleting 3rd party software

    Hello,
    We want to delete a 3rd party software bolt-on that all resides in its own namespace /epiuse/.This is in our DEV,TEST and PROD systems. The original system for all objects is different to ours. How can this be done easily ?. There must be an easier and quicker way than to register each object so you can delete it.
    cheers
    Trev J

    If the amount of storage for your Messages is not decreasing when you delete some (or all), then you need to try resetting your device to see if it will clear it up. I just went to my device and checked the amount of storage being used by Messages (13 MB). Then I deleted the 6 messages I had, and went back to check the Usage. It is now 3 MB.
    To reset your device (nothing will be lost): Hold down the Home and Power buttons at the same time and continue to hold them down until the Apple appears (up to 30 seconds). Once the Slide to Unlock screen displays, check your usage again.
    Cheers,
    GB

  • 3rd party Applications

    How do I delete a 3rd party application. I installed an HP printer and it did not work. I want to uninstall the application and the associated programs. How do I delete them. I am new to the MAC

    You can drag the application to the trash, but there could be some other crud that's installed that won't get deleted. This is quite likely with a printer installation, and especially with HP printers as they have tons of crud.
    Try re-running the installer itself and seeing whether it offers an "uninstall" option. If not, go to HP's site where you got the drivers and look for uninstallation instructions.

  • Deleting 3rd Party Loops... where the freak are they stored???

    Yes, I know that by default, loops are stored in Library/Application Support/Garageband/Apple Loops, or the similar address under my user library.
    And, I know there is another folder close by, for Jam Packs.
    However, I have been going INSANE, trying to find old, single-hit files and obsolete loops which i have downloaded from 3rd party sources. They are NOT in the regular places such as the Apple loops folder.
    All of them were installed by drag and drop method into the Garageband loop browser, so one would assume they all went to the same place.
    How in the world do i find these loops?
    The Finder and Spotlight have turned up nothing.
    I have about 5,000 i'd like to trash to make room for more important things.
    Can Garageband be THIS cumbersome?

    HangTime wrote:
    yes, that was telling him to not delete it by hand because, as Christoph points out above, you then need to reindex, whereas deleting it through GB takes care of that.
    with 5,000, it's probably worth the reindex, deleting one at a time through GB would be ... tiring.
    Actually. i like your idea of deleting from the browser. They are scattered in different categories and different folders. I'd have to search and test them anyway... so I might as well just axe them when i come upon them in the browser.
    I swear I've tried it that way before, to no avail..
    Thanks a lot for you help.

  • Deleting 3rd party apps

    I downloaded a 3rd party world time app and got a **** app instead. I've tried everything to get rid of it, but nothing works. Does anyone know of another way to delete apps other than through iTunes?
    In iTunes I can bring up the apps trays and highlight the app I want to get rid of, but no 'X' appears in the upper left corner to let me delete it.

    You are signed into the account from which they were purchased?
    You clicked on "Applications" under "Library"?
    You clicked on/highlighted the app?
    You hit the delete key/edit delete?

  • Permanently deleting iPhone text messages... impossible without 3rd party software?

    Am I correct in assuming there is currently NO possible way to permanently delete iPhone text messages and attachments unless you without either A. using 3rd party software that costs loads of money, or B. completely wiping your phone? This is seriously not available on these phones with all the other advanced features and tech?
    It saves gigs of txt messages and attachments permanently that takes up all of the space on your phone... I just have a hard time believing this issue hasn't been addressed....

    If the amount of storage for your Messages is not decreasing when you delete some (or all), then you need to try resetting your device to see if it will clear it up. I just went to my device and checked the amount of storage being used by Messages (13 MB). Then I deleted the 6 messages I had, and went back to check the Usage. It is now 3 MB.
    To reset your device (nothing will be lost): Hold down the Home and Power buttons at the same time and continue to hold them down until the Apple appears (up to 30 seconds). Once the Slide to Unlock screen displays, check your usage again.
    Cheers,
    GB

  • Delete 3rd party apps ?  HOW ?

    I would like to clean up my HD and erase 3rd party apps I don't use, such as :
    Adobe Photoshop CS2
    Canon Utilities
    CoreDuoTemp
    eDrawings (.dwg file viewer)
    Google Earth
    Google SketchUp 6
    HandBrake 0.7.1
    None have an uninstall program. Is there a SAFE way of deleting them ?
    Dragging them to Trash and emptying the trash is safe ?
    Appreciate any tips.

    Hi
    Adding to QTK's suggestion, also look in your HD>Library>Applications Support, and same location for your User Account. There you may see folders related to the apps you're looking to trash. Do the same for these folders.
    Photoshop is a bit trickier. In Applications Support you'll see an Adobe folder. Inside that folder look for anything Photoshop related. If you have other Adobe apps installed in your system, let us know the name of the Adobe folders in Applications Support. Otherwise, if you trash the wrong folders you may create operation problems opening other Adobe apps.
    Lastly, same Libraries - Preferences folder. Inside you'll find the preference files related to the apps you are trashing. Usually, either the app. name, or the developer name is part of the file name.
    Best strategy is to back-up the HD before trashing applications, especially if you are not sure. This way, you can revert to the original state if something goes awry.

  • My newly bought ipad4 is unable to delete 3rd party apps

    I have purchased a new ipad retina on 16.01.2013 from kernal harayana and my ipad retina is not deleting 3rd party i.e later installed apps. On searching the net it seems that restriction settings under general settings is on but my ipad doesnot have restriction settings. Is it because when i closely watched the model no. on box it says DEMO.The seller from Kernal,Infotech computers has cheated while selling. Kindly help me to solve this problem.

    It's a demo model, nothing anyone here can do.  Take it up with kernal harayana.
    You can try settings > general > reset > erase all content and settings but no guaranteee that will work.

  • I want to sync my 3rd party email to  all of my MACs.  If i delete an email on one device i would like it to delete on all the others.

    I want to sync my 3rd party email to  all of my MACs.  If i delete an email on one device i would like it to delete on all the others. Anyone have any luck.  Maybe icloud?  How do i switch it for exsiting emails on Apple mail. thanks!

    sjc47 wrote:
    I was also wondering why iCloud doesn't delete e mail across all devices when I delete it on one device.
    It does, provided it is an iCloud email account (which is an IMAP account).  Email from non-iCloud email accounts such as Comcast, etc. is entirely separate and is not managed in any way by iCloud.
    sjc47 wrote:
    I am also confused by the discussion that POP accounts don't sync using iCloud as I have been using my Comcast POP account as well as several other POP e mail accounts and I receive e mails from all these accounts across all my devices without issue (Mac Mini, MacBookPro 13, iPhone5).
    As mentioned, your non-iCloud POP accounts are entirely separate email accounts and are not managed by iCloud.  You are receiving email from your POP accounts on all your devices because you have the accounts set up on all your devices; but the email is being sent from your other email providers such as Comcast, not by iCloud.
    sjc47 wrote:
    When you say POP accounts don't sync are you all referring to the deleting of e mails which was one of the subjects of the original post or is it something else I'm missing?
    Unlike IMAP accounts, POP/POP3 accounts only deliver email to your devices.  Any subsequent changes that you make an email on any of your devices such as deleting a message, marking it as read, etc., will not be synced to your other devices.  This will give you a little more information on the difference: http://gmailblog.blogspot.com/2008/05/getting-gmail-anywhere-imap-versus-pop.htm l.

  • Deleting DTP LOCKED Req for OHD-3rd party tool

    Hi Gurus,
    As a part of one of my scenario i had created a OHD with type 3rd party tool.Till yesterday it worked fine.Today PC got failed with exception DTP req locked.I understand that earlier DTP req failed and pc triggered the DTP again it causes the issue.Now i would like to know that is there any way to delete the failed req.I'm using IBM Data stage as a target the OHD.
    Regards,
    Rambabu

    Hi Mates,
    I already tried all the options mentioned by you from morning onwards.But didn't helped out.
    @Nanreshsing: i had followed the note it says to run the report RSBK_DEL_DTP_REQ_FROM_OHD as suggested by Suman too
    @Ramanjaneyulu: My first action after getting the error was  checking the thread which you mentioned in the reply.
    I tried to go to db tables and checked for the req and then changing the status,and to another table etc and then a fm and then a report mentioned above.
    After performing all the actions i got the message that no req was deleted from the OHD from the above report.
    Regards,
    Rambabu

  • Photoshop Elements 11 deleting 3rd party fonts

    Whenever we install Photoshop Elements 11 it removes 3rd party fonts from the programs. If you uninstall, they appear again! This doesn't happen with Photoshop 9.
    This clearly is a Photoshop problem and not a 3rd party problem.
    Does anyone know of a fix or work around for this?

    I'm confused by what you mean by 'third party fonts' and 'removes from programs'.
    Times New Roman, Verdana, Webdings are all standard fonts provided with  Windows. So are you saying that Windows fonts are disappearing, but only from after the letter 'S' ?
    'Removes from programs' - do you mean that the fonts (from after 'S') no longer appear in other applications e.g. WordPad (the standard word processor provided with Windows)? Check it by starting WordPad and scrolling to the bottom of the fonts drop-down box.
    With PSE11 installed, press the Windows key (or click Start) and type 'fonts'. Click the entry 'Fonts' that will show up in the search. Are the fonts after the letter 'S' present?
    Cheers,
    Neale
    Insanity is hereditary, you get it from your children
    If this post or another user's post resolves the original issue, please mark the posts as correct and/or helpful accordingly. This helps other users with similar trouble get answers to their questions quicker. Thanks.

  • How do you install and delete 3rd party plugins from Logic 9?

    I have been trying to install RX2 from iZotope with no success. I can authorize it in the standalone version but not in logic.  I had a previous demo version of it installed and everytime I went to authorize it would point to the earlier version and not authorize and run in demo.  I removed a number of files pertaining to it from HD & User/ Library/ Preferences and Audio/ Components and tried reinstalling.  Now it doesn't even show up in the plugin list.  Can anyone tell me how to clear this up?  Also, how to deal with 3rd party plugins.  What can I say, no problems with Reaper!  Appreciate any help with this.  Thanks

    The Isotope website isn't very clear about it.. It seems to indicate the Windows version is 32 and 64 bit where as the AU version is 32bit and will work/is compatible with Logic 64bit.. which it will as it will run under the 32 to 64bit bridge... when Logic is run in 64bit mode..but as i said, it's hard to tell one way or the other.
    The thing is, if you simply reinstall it.. and then run Logic first in 32bit mode and then in 64bit mode.. it should show up.
    Where are you looking for it in Logic?
    Does it show up in the AU Plugin Manager? (after, that is you have reinstalled it)

  • Logic 9 Issue Triggering Wrong 3rd Party Samples

    I know the question says 3rd party but bear with me because I have ruled out issues with the 3rd party libraries and players. This is my Issue:
    So far no one from 8dio, Native Instruments, or Apple can fix this and I am completely out of ideas.
    I recently picked up a 2010 8-core Mac Pro and have had this problem ever since. The issue is only with my 8dio Adagio strings (most of them), it will either play the wrong sample, or no sample at all. I don't get any error messages though. All my other Kontakt libraries work fine.
    Example: Bass "Shorts" will play "feather stacc", "marcato", but not "stacc" or "pizz". Violas will produce sound however it plays the exact same sample which ever articulation I select, but it will only play for a second then cut out, no sustained notes. This sort of issue is true for pretty much all of the strings. I have ruled out many things including:
    1. Its not the 8dio strings libraries or Kontakt because they work fine in standalone mode through Kontakt, its only when I try to open them through Logic that I get the issue.
    2. I did a fresh install of Logic and Kontakt and still the same issue, however when I installed the exact same configuration on a friend's laptop, they worked fine through Logic.
    3. The strings did work fine on my old iMac until I dragged over and opened a session from the new computer, now I get the same issue there. The only way I can get it to work on the iMac is to open an old session which already has Kontakt and strings loaded up, otherwise a new project or new instance of Kontakt results in the same issue. This points to a settings or preference issue with Logic, however a fresh install and/or deleting the "preferences" file should fix it right? Wrong.
    4. I have tried 3 different operating systems (Mavricks, Mountain Lion, and Lion), 2 different main drives, a SSD and a regular drive. I've tried a fresh install of everything multiple times, different user accounts, redownloading Adagio, running the libraries from both internal and external HDs....
    After ruling everything else out it still seems like a problem with Logic other than the fact that the fresh install works fine on my friend's laptop but not my new Mac Pro (both running Mountain Lion). Any ideas would be much appreciated cause I'm all out of them. Thank you.
    Gabe
    2010 Mac Pro 8-core 2.4ghz
    OS X 10.8.5
    Logic Pro 9.1.8
    Kontakt 5.3
    8dio Adagio
    Apogee Duet Firewire Interface

    If your Audio Unit Manager is not booting, re-install.
    Treatment

Maybe you are looking for