Po derelease inspite of gr done

po is dereleasing inspite of gr done, how can we stop this, plzx tell me, it's very urgent.

Hi Nitin,
In Release procedure for Purchase order configuration,
Goto Release Indicator tab there is option of Changability --entries will be 1 to 6
just enter the changeablility 1 to your released button.
So system will not allow you to derelease the PO once GR is done.
If you found warning message while dereleaseing just change to error message, then system will not derelease the PO after GR is done.
Check & try. This will solve your problem
rgds
Chidanand

Similar Messages

Why inbound delivery for when i click "goods movement tab" still A

Hi
Please clarify my doubt. I have a PO for which i did inbound delivery and did goods receipt through MIGO also for entire quantity. My doubt is that when i display inbound delivery after all this process and click on "goods movement tab" why the status still shows "A" not started instead of "C" i.e complete inspite of GR done for full quantity. Is there any setting. Please clarify this.
Dinakar

Hi
Please check how you did MIGO wrt to PO or Inbound delivery i.e. Shipping notification
Please check your PO details and config of SN
Kishor

Regd: LSMW

Hi All,
While uploading the data's in the T-Code "J1ID" for 'Excise Tax Rates' we get an error 'No batch input data for screen SAPMJ1ID 0200' at the end of the transaction,but it saves the data's in the relevent fields 1ly,
Inspite we have done the recording and the mapping of fields excatly and correctly we get this message, the message says that Batch input was created incorrectly, But we don't find any problem in the Batch Input Session method.
Suggestions and Help will be much appreiciated.
Thanks & Regds.
Ramesh.

Hi Ashok Kumar Prithiviraj,
I know that its the Intial Screen it gives error after saving the data. So i think i have given the relevant inputs to staisfy the condition.
Thanks & Regds.
Ramesh.

Help me I can't epmty trash

I use Mac os 10.6 and I can't empty trash
the only way to empty trash is to format bootcamp and after a few day the trash re fill again inspite of i don't install windows or any other system on bootcamp the name of these file that in trash is (ËdMe±±.ÑÕ) and( išŒëé¬\”.«¢J) and like that
please help me

you didn't reformat the drive correctly. you just erased the OS X partition. you need to reformat the whole drive. boot from the SL dvd and start disk utility from Utilities menu. select the whole drive (select model, not name) and click on the partition tab. set the number of partitions to 1. click on options and set the partition scheme to GUID. set the drive format to mac os extended journaled and click "apply". when formatting is done quit disk utility and proceed with the install.

Material Not getting replicated inspite of Done status in SRM

Hi
I am facing issues with regards to the material replication. I have made the necessary middleware settings in both R/3 and SRM side. Also I have replicated the objects DNL_CUST_BASIS3, DNL_CUST_PROD0, DNL_CUST_PROD1 and DNL_CUST_SRVMAS (in that order) successfully. However when I try to replicate the materials (no filter settings maintained) none of the materials gets replicated. The queue in R/3 and SRM doesn't show a stuck entry anywhere. In R3AM1 also the status
is green with Done status. Sometimes 0 block gets picked up and sometimes 3.
However when I go and check the materials in COMMPR01, I do not see any materials been replicated. There are no other logs present anywhere.
Can someone kindly help me out in understanding the problem.
Thanks in advance.
Manoj

Hello Ashutosh
I had already checked the status in SMW01 and it shows "Confirmed (fully processed)".
Also no queues were stuck anywhere.
I also followed the instrauctions as explained in the blog link given by you.
Regards
Manoj

HT5731 What if I purchase an App from the App Store...start using it, exploring it, etc. and discover I don't like it - inspite of the 4.5 star rating...can I return it?

I purchased an app (for $9.99) and after looking at it, don't like it. Is there any recourse to 'return' it?

If you go to https://reportaproblem.apple.com/ and sign in with your Apple ID, you can report an issue with a purchase and request a refund. In this particular scenario, the best choices to select would probably be "Item opens but doesn't function as expected" or "Problem is not listed here."

Inspite of having javascript enabled, I am getting a message"21966 javscript disabled for this browser". How do i get it done?

I checked the tools options wherein the javascript was enabled. However, I still get the message :21966 Javascript disabled for this browser. Now I am not able to move forward unless this has been sorted. How do I solve this issue?

Read the article you linked.
If changing your password does not resolve, then contact itunes support

Hihaving a query like that who has done the Transport? How can i trace who

having a query like that who has done the Transport? How can i trace who has done the transport (Import).
I have tried with following steps but unable to find the right person.
1. Go to TMS and disply the appropriate queue.
2. Select menu path: Goto>Import History.
3. Select menu path: Edit> Dipaly More.
4. This will give the the "User" column.
But my problem is the transport has happened long back. is there any other way to find out old import request who has done the transport.
Please someone help me out on this.

Do this may it can help you.
At the last step where you had given "diaplay more"
do this inspite of that:
Extras --> Personal Settings
Check the option "Query Interval Time" and try again.
Best of luck !!!

RR done thru BAPI, but UD fails

Dear All,
We are doing RR thru BAPI thru external System. Design is, after successful RR, BDC for UD is called and UD is getting happened.
Issue is for some lots RR is successfully happening but UD is not getting done.
When I go in UD screen, System allows manual UD without any apparent misbehaviour.
What I found is, it is returning message: Characteristic with confirmation number <ConfirmationNumber> is already blocked. This message is for some Lots without UD, but for some lots even there is no return message !
Inspite of this message, RR is successful and this MIC is Closed.
Queries:
1. What is the role of Confirmation no. of MIC? What i understood is, confirmation no. is unique across the lots. Correct me if I am wrong. Why System is throwing this message and simultaneously RR is Closed for this MIC?
2. What is role of Field: INPPROC_READY in Table: QAMR? How this field is getting updated, when? Currently, this field is Blank for all MICs in QAMR.
Regards,
Tanuj Parikh

Sounds more like a timing issue to me and you are running into database locks that are preventing the UD from completing.
In your automated process, try putting in a reasonable delay or wait period between closing all the characteristics and trying to make the UD.
FF

HT204088 Inspite of submitting all requiredFields I am not getting purchase History and Security code for redeeming.I have clicked for purhase of Sri Sri Shankar's Rudra Album but unable to get it loaded on my I pod What do I do ? Reply to me by Laila no

Dear Customer Care I Tune,
I have been trying to down load "Rudra"Album of Sri Sri Ravi Shankar, A religious & Spiritual Hymn. from I tune store. The price was shown as Rs 120/= I clicked on buy and filled the details of my debit card (ICICI Bank India)which created account but I could not fill up code for redeeming or security code being asked for ,with the result the my purchse is not getting authorised (I presume.)I am unable to get the Music on my I pod. To my Earlier complaint I got Reply under follw up #272091438 from your customer care miss Laila. I was asked to action as suggested in the link. But inspite of following the insructions as suggested in the link I could not get Purchse details and order number as envisaged in the instructions. Can I expect some working suggestins and advice .
Anant Pashilkar
Presenlty I am at Austine Texas
<Personal Information Edited By Host>

Most of the people on these forums, including myself, are fellow users - you are not talking to iTunes Support here. I've asked the hosts to remove your email address and phone number from your post.
If you are currently in Texas in the US then you won't be able to buy from the Indian iTunes store - you need to be within a country to use its store, so to use the Indian store you will need to be in India.
In terms of the redeem code that you mentioned, entering an iTunes gift card is optional and they are country-specific and they are not available in all countries - I don't think that are available in India, so I don't think that you could fill it in anyway. For the bank card, i don't think that debit cards are now accepted as a valid payment in the store, there have been a number of posts recently about them being declined, and they are not listed on this page.

ITunes issue on IPhone 5s - songs don't show up

I upgraded the operating system on my iPhone 5s to 8.1.2. I manually synced songs from an old Macbook Pro with ITunes 11.4 (the most recent version). (I can not update to iTunes 12 because my computer is not supported.) The issue is that 11 voice memos that were synced to the iPhone 5s do not show up. They do not show up as songs by the "song titles" I gave them or as the "voice memo" genre. The playlist I created for them shows up as empty. These voice memos were originally recorded on the iPhone 5s. The weird thing is that when I plug the iPhone 5s into my Macbook Pro via USB, the voice memos show up as having been transferred. I have tried reboot the iPhone and resetting it.

After hours of resync-ing and rebooting, I figured out what was going on. The voice memos are on the phone but they only show up in the voice memo app. They do not show up in the iTunes app. I don't need to play them in iTunes so this solves the problem for me. Hopefully, my experience will save someone else some time.

Balls don't move in bouncing balls game.Please Help !?

I want to repaint the canvas panel in this bouncing balls game, but i do something wrong i don't know what, and the JPanel doesn't repaint?
The first class defines a BALL as a THREAD
If anyone knows how to correct the code please to write....
package ****;
//THE FIRST CLASS
class CollideBall extends Thread{
    int width, height;
    public static final int diameter=15;
    //coordinates and value of increment
    double x, y, xinc, yinc, coll_x, coll_y;
    boolean collide;
    Color color;
    Rectangle r;
    bold BouncingBalls balls; //A REFERENCE TO SECOND CLASS
    //the constructor
    public CollideBall(int w, int h, int x, int y, double xinc, double yinc, Color c, BouncingBalls balls) {
        width=w;
        height=h;
        this.x=x;
        this.y=y;
        this.xinc=xinc;
        this.yinc=yinc;
        this.balls=balls;
        color=c;
        r=new Rectangle(150,80,130,90);
    public double getCenterX() {return x+diameter/2;}
    public double getCenterY() {return y+diameter/2;}
    public void move() {
        if (collide) {
        x+=xinc;
        y+=yinc;
        //when the ball bumps against a boundary, it bounces off
        //bounce off the obstacle
    public void hit(CollideBall b) {
        if(!collide) {
            coll_x=b.getCenterX();
            coll_y=b.getCenterY();
            collide=true;
    public void paint(Graphics gr) {
        Graphics g = gr;
        g.setColor(color);
        //the coordinates in fillOval have to be int, so we cast
        //explicitly from double to int
        g.fillOval((int)x,(int)y,diameter,diameter);
        g.setColor(Color.white);
        g.drawArc((int)x,(int)y,diameter,diameter,45,180);
        g.setColor(Color.darkGray);
        g.drawArc((int)x,(int)y,diameter,diameter,225,180);
        g.dispose(); ////////
    ///// Here is the buggy code/////
    public void run() {
        while(true) {
            try {Thread.sleep(15);} catch (Exception e) { }
            synchronized(balls)
                move();
                balls.repairCollisions(this);
            paint(balls.gBuffer);
            balls.canvas.repaint();
//THE SECOND CLASS
public class BouncingBalls extends JFrame{
    public Graphics gBuffer;
    public BufferedImage buffer;
    private Obstacle o;
    private List<CollideBall> balls=new ArrayList();
    private static final int SPEED_MIN = 0;
    private static final int SPEED_MAX = 15;
    private static final int SPEED_INIT = 3;
    private static final int INIT_X = 30;
    private static final int INIT_Y = 30;
    private JSlider slider;
    private ChangeListener listener;
    private MouseListener mlistener;
    private int speedToSet = SPEED_INIT;
    public JPanel canvas;
    private JPanel p;
    public BouncingBalls() {
        super("****");
        setSize(800, 600);
        p = new JPanel();
        Container contentPane = getContentPane();
        final BouncingBalls xxxx=this;
        o=new Obstacle(150,80,130,90);
        buffer=new BufferedImage(getSize().width, getSize().height, BufferedImage.TYPE_INT_RGB);
        gBuffer=buffer.getGraphics();
        //JPanel canvas start
        canvas = new JPanel() {
            final int w=getSize().width-5;
            final int h=getSize().height-5;
            @Override
            public void update(Graphics g)
               paintComponent(g);
            @Override
            public void paintComponent(Graphics g) {
                super.paintComponent(g);
                gBuffer.setColor(Color.ORANGE);
                gBuffer.fillRect(0,0,getSize().width,getSize().height);
                gBuffer.draw3DRect(5,5,getSize().width-10,getSize().height-10,false);
                //paint the obstacle rectangle
                o.paint(gBuffer);
                g.drawImage(buffer,0,0, null);
                //gBuffer.dispose();
        };//JPanel canvas end
        addWindowListener(new WindowAdapter() {
            @Override
            public void windowClosing(WindowEvent e) {
                System.exit(0);
        addButton(p, "Start", new ActionListener() {
            public void actionPerformed(ActionEvent evt) {
                CollideBall b = new CollideBall(canvas.getSize().width,canvas.getSize().height
                        ,INIT_X,INIT_Y,speedToSet,speedToSet,Color.BLUE,xxxx);
                balls.add(b);
                b.start();
        contentPane.add(canvas, "Center");
        contentPane.add(p, "South");
    public void addButton(Container c, String title, ActionListener a) {
        JButton b = new JButton(title);
        c.add(b);
        b.addActionListener(a);
    public boolean collide(CollideBall b1, CollideBall b2) {
        double wx=b1.getCenterX()-b2.getCenterX();
        double wy=b1.getCenterY()-b2.getCenterY();
        //we calculate the distance between the centers two
        //colliding balls (theorem of Pythagoras)
        double distance=Math.sqrt(wx*wx+wy*wy);
        if(distance<b1.diameter)
            return true;
        return false;
    synchronized void repairCollisions(CollideBall a) {
        for (CollideBall x:balls) if (x!=a && collide(x,a)) {
            x.hit(a);
            a.hit(x);
    public static void main(String[] args) {
        JFrame frame = new BouncingBalls();
        frame.setVisible(true);
} This code draws only the first position of the ball:
http://img267.imageshack.us/my.php?image=51649094by6.jpg

I'm trying to draw everything first to a buffer:
buffer=new BufferedImage(getSize().width, getSize().height, BufferedImage.TYPE_INT_RGB);
gBuffer=buffer.getGraphics();
The buffer is for one JPanel and then i want to draw this buffer every time when balls change their possitions(collide or just move).
The logic is something like this:
startButton -> (ball.start() and add ball to List<balls>),
ball.start() -> ball.run() -> (move allballs, paint to buffer and show buffer)
In the first class:
BouncingBalls balls; //A REFERENCE TO SECOND CLASS
In the second class:
private List<CollideBall> balls=new ArrayList();
the tames are the same but this isn't an error.
Edited by: vigour on Feb 14, 2008 7:57 AM

"Enable Swipe" don't work and Tablet Layout on a Smartphone

Hi there,
I have two big problems with my own site www.mhgrafikdesign.de:
1. I have different slideshows in my tablet version of my site. I created the slideshow before one of the updates with the feature "Enable swipe" came out. However, it worked well on my Samsung Galaxy Tab 10.1n. Now I have a Microsoft Surface and it's not working anymore although "Enable Swipe" is enabled. I don't know if the Microsoft Surface has problems with the slideshow or one of the updates has "damaged" my slideshow. Please help me! Any ideas?
2. I have a HTC 8S smartphone and if I type www.mhgrafikdesign.de my smartphone always show me the tablet version. Any idea why? P.S. Swiping there is also not possible.
Many thanks for quick help. My website is my flagship in the web and it's a little bit embarrassing if my slideshow on the tab don't work... = /

This is now a slideshow created with Muse: Homepage
The slideshow uses fullscreen mode and was build with the latest version of Muse. On my Win8-Tablet, it is not working. I tested this with the IE11 in desktop- and in modern-ui-mode.
Next to this problem, I also run into these things:
1. Using the buttons to go forward and backward in the slideshow will select the text-arrow inside the button when touched.
2. Clicking the forward- and backward-button behaves different. Windows Desktop -> slideshow does not roll back, so you can click forever in one direction, no feedback that you reached the end. On iOS -> slideshow will be rolled back and you get the visual feedback to start over again.
3. Zoom into the fullscreen-slideshow will result in strange and not really controllabel behaviour. Zooming in does not allow to pan.
But I am not talking only about the phones. It is more about windows tablets in general. So, content can be viewed in the InternetExplorer11 in desktop-mode and also in modern-UI-mode (touch does work in both modes). But it is also possible, that people use other browsers like Firefox and Chrome. I think, it would be a quite a good idea to translate the movement of the mousepointer into gestures. This javascript library shows what I think is a good aproach: Hammer.JS - Hammer.js

Some loops don't loop in browser

In the Loop Browser when previewing, the loops play over and over until I stop them, including ones downloaded from MacLoops. Except one group from MacLoops (Chillout) only plays once through then stops. How can I get them to play continuously like all the others?

This one set of loops acts differently. Besides not "looping" when playing in the browser they also do not follow the tempo&pitch of the Project. (In fact the option is grayed out when the loop is in the Timeline). It's the macloops chillout set.
http://www.macloops.com/audio/freechillout_drum_loops_forgarageband.php
I don't think I did anything different than with the other loops of theirs I D/L'd. (I think I'll try deleting them and D/L'ing again).

I am trying to restore my catalog having previously done a back up to an external hard drive and subsequently an incremental backup. I am using Photoshop Elements 11 and the only option given in the restore procedure is to open a .tly file.

I have done this but now the restore function is asking for yet another file, which i assume to be the original back up, but that is the only .tly file since the only other relevant file appears to be called catalog.buc but that is just not visible when using the restore function? How do I continue from here with this restoration of my catalog?

Martin_Had a écrit:
Thank you Andaleeb. I appear to have an old backup of a year ago, and a more recent full back up plus an incremental backup.
Regrettably I don't really understand what is going on because firstly the restore does not complete its cycle so I cannot see what that backup file contains and secondly all I have read would suggest that the .tly file is the full backup and the catalog.buc file is the incremental backup. For the present, the catalog shows the photos for 2014 which makes me think I might have backed from the old back up file.
I am minded to create another catalog and try again.
Any views on what I can do?
A backup (full or incremental) is a folder, not a file. It contains renamed pictures file copies as well a copies of the files and subfolders of the original catalog. The catalog.buc is a renamed copy of the database of your original catalog while the backup.tly. That backup.tly file contains the information to restore the renamed pictures where you decide, the original location or a new custom one. You can't do anything with the backup yourself, only the restore process can do the job if it finds the backup.tly file. In the case of an incremental backup, you have to tell the restore process where to find the incremental backup folder; it finds the backup.tly file in that folder and finds what is to restore there; then it asks you for the previous backup folder (in your case the full backup); you then browse to that full backup folder so that the restore process can find find the backup.tly there; the restore then deals with the rest of the files to restore.

Po derelease inspite of gr done

Similar Messages

Maybe you are looking for