PO Display in ME2J REport

Hi Friends,
We are using Projects.In ME2J report(List of PO for a Project), The same PO Details is displaying twice.Please suggest..
Regards

Hi,
You can try the report ME2K also for the list of PO for any project.Please select the scope of supply ALV to get the report in tubular form.
Regards,
Manish

Similar Messages

Tax code not displaying in me2j - Need Report for PO tax codes

Dear Guru's,
For Trading materials, while creating PO, we are inserting Tax codes in "Invoicing Tab". But the same(TAX CODE) is not displaying in ME2J report.
But For service materials, we are entering tax codes in the "Services Tab" and it is displaying in the report ME2J.
Kindly tell me a report where we can see the taxcodes for PO.
Regards,
deepa

Sir,
I did that already, but no code is displaying in that "Tax code Column" for Trading materials.
But tax code has been entered while creating PO in "Invoicing Tab" as "V0" for example.. V0 is not displaying in ME2J Report.
Pls. reply
Edited by: deepa rani on Jun 4, 2008 2:54 PM

Udf Data is not being displayed in the report

Hi all,
i have designed one report in which i am displaying some udf fields along with other system fields.
i have not used any selection criteria.
when i run report it doesn't display udf data of some random rows in the report even if data is peresent in that udf field.
If i open sales order and press 'Shift-F2' and update the document and now if i run report then i get that udf value in the report.
why this happening. data is there in the udf field only its not displayed in the report with out updating the that udf.
pls suggest some solution.
regsrds,
Chetan.

Hi Ashish,
I ran the "ZPS/!ZPS" in RSRT where ZPS is the infoset name. In Dev, it displayed the values. In QA, it displayed the below messages:
ECharacteristic 0TCAKYFNM does not exist. Check authorizations
WThere are calculated elements. These results are bracketed [ ]
and below that, it displayed the values for Number of records. But, it has not displayed the values for the other figures.
Does this has any impact in QA.
Thanks & Regards,
AVN Rao.

How can we split the grid display in alv reports.

hi everyone.i am trying to get the display of two reports in a single one using split screens.i had written a report for vendor balance.one for open and one for cleared items.how can i combine these two reports.
the field catalog was same for these two.
can anyone suggest me suitable way to perform.

HI,
You can also try ALV Blocked display.
Pls Check following program
BCALV_TEST_BLOCK_LIST.
FM used are
call function 'REUSE_ALV_BLOCK_LIST_INIT'
exporting
i_callback_program = sy-repid.
call function 'REUSE_ALV_BLOCK_LIST_APPEND'
exporting
is_layout = it_layout
it_fieldcat = fc
i_tabname = 'IT_VBRK1'
it_events = it_event
tables
t_outtab = it_vbrk1.
call function 'REUSE_ALV_BLOCK_LIST_APPEND'
exporting
is_layout = it_layout
it_fieldcat = fc1
i_tabname = 'IT_VBRK2'
it_events = it_event
tables
t_outtab = it_vbrk2.
call function 'REUSE_ALV_BLOCK_LIST_DISPLAY'.
form top_of_page1.
format color col_positive.
write: / 'FIRST BLOCK'.
endform.

PR and PO should be display in IWBK report for stock item.

Hi Exterts,
Our client requirement is to display PR and PO number in IWBK report for stock item as well.
I know PR and PO can be display in IWBK report for non-stock item but how we can display PR and PO for stock item,as PR is generated through MRP for stock item.
Please share your ideas on this.
Regards
Vishu

Vishu,
In typical MRP settings you "procure to stock" not "procure to order".
This means that there is no direct link between the PM/CS orders and any PR/POs created via MRP.
Subsequently you will not be able to show this data in IWBK.
However, we are currently designing a customer-specific report similar to IWBK that also counts the number of open POs for a given material on a PM/CS work order. The user can then navigate to ME2M (PO list) or MD04 (stock requirements list) to get further details.
PeteA

Different display on client report builder and web reports

Hi all, I have build a report in report 6i version Report Builder 6.0.8.13.1.And I set the page to 8.5*11 ,and it runs well in the client ,but when I put it on the UNIX SERVER,and run it from web URL,It displayed different from the client report builder.The web report is "smaller" than the client report ,but the font size is as same as the client .
My HPUX is 11x,and display the Chinese report .
Any body know why ?give me some advice ,thank u very much.

Hi
If you had built the report definition on Windows and then moved this to Unix server, you may find different fonts in use. This is becuase your Unix setup does not have the same fonts install. At design time, You need to use fonts which are available on Unix also. The same fonts shaould also be installed for printer in Unix i.e. the AFM/PFM font files should be kept under $ORACLE_HOME/guicommonX/tkXX/admin/AFM or PFM directory. This would give you the same output and would lessen the porting affect.
Thanks
Rohit

Need to remove space for a field when displayed in ALV Report

Hi,
I have material field of length 18, but the content is only 10 char. I need to remove the extra space when it is displayed on ALV Report.
Is there any option in ALV field catalogue

use statement condense.
condense zmatnr.
also giv output lenth of alv column as 10.

Is it possible to Display BW Bex report iviews in Tabbed Interface?

Hi,
Is their a way to display BW BEx Report Iviews in Tabbed Interface?
My requirement is to show four BEx Reports using 4 tabs on a page. Can we achieve this functionality in portal? If yes can some one guide me how to proceed?
Regards
Sai Krishna Reddy

why not have a webtemplate with tabbed interace and use that webtemplate to create BWP iview?
check out the following how to document on this subjec.
<a href="https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/5074a890-0201-0010-a489-dd05902a28c8">How to Create Buttons and TabStrips in BI Web Applications</a>
Regards
Raja

Display a ALV report in EP

Hi,
What is the best way to display an ALV report in the Portal?
I would like the report to be displayed in the GUI of the Portal (meaning, I would like to work with WebDynpro or PDK or any other way such that the GUI will be identical to all the other Portal objects).
Thanks in advance,
Aviad

Hi,
You can actually, as suggested by others, code the PDV_ALV found in the PDK yourself.
All you need is to understand the workflow of the BAPI called "PORTAL_ALV_QUERY_CALL".
This BAPI is configured to get the properties of a query and another BAPI (derived from Z_QUERY_SELECTIONS) which plants additional data in the original query.
For example - If you wish to activate a query called myQuery1 in the user group FI-AP with a variant called TEST between a date range selected by the portal user. The parameters passed to the BAPI are as follows -
"QUERY_NAME=myQuery1"
"QUERY_USERGROUP=FI-AP"
"QUERY_VARIANT=TEST"
"QUERY_CREATE_SELTAB_FM=Z_QUERY_SELECTIONS_1"
"FROM_DATE="
"TO_DATE="
What will happen in the background is that the query myQuery1 from the usergroup FI-AP will be activated using the variant TEST and using the QUERY_CREATE_SELTAB_FM value the date fileds will be assigned to their corresponding fields in the query. After the activation the BAPI will return a table with the result.
Hope it helps,
Aviad

What is the difference between list display and grid display in alv report

Hai genious
i am a new of the abap, i dont know the alv report, i have a small doubt, can u please tell me what is the main difference between list display and grid display in alv report
thanks&regards
chinnu

Hi ,
1. For all practical purposes, they are the same.
2. Some differences:
a) from abap coding point of view,
alv list is done with Function modules,
alv gris can also be done with FM,
but can also be done using OO concepts.
b) Alv grid (using oo concept) requires
designing the screen layout .
Hence, in one screen, we can show more
then one alv grid
(we cannot show more than
one alv list on one screen)
c) ALV grid uses ActiveX controls
present on the Presentation Server.
Hence, it consumes More Memory
on the presentation server.
d) ALV LIST is Display Only.
Whereas
ALV Grid Can Be made EDITABLE for entry purpose.
e) In alv grid, these options are possible,
but not in alv list.
without horizontal lines
without vertical lines
without cell merging during sorts
display total lines above the entries
I hope it helps.
Regards,
Mamta
Edited by: Mamta Verma on Nov 27, 2008 6:41 AM

Discoverer viewer displaying all the reports instead of one report

Hi Team,
I have created one menu and attached 4 reports to that.after that that menu is attached to the main menu.This menu is attached to the one xyz responsibility.
Now i am facing the problem is : After logging to the responsibility,i clicked on individual report ,but it is not displaying only one report.It is showing all the reports in the discoverer viewer.
Can you please help me in this issue..

Please post the details of the application release, database version and OS.
I have created one menu and attached 4 reports to that.after that that menu is attached to the main menu.This menu is attached to the one xyz responsibility.
Now i am facing the problem is : After logging to the responsibility,i clicked on individual report ,but it is not displaying only one report.It is showing all the reports in the discoverer viewer.Please review these docs and verify that you have completed all the steps.
How to Create a Link to a Discoverer Workbook in Apps R12 [ID 471303.1]
How to Create a Link to a Discoverer Workbook in Apps11i [ID 278095.1]
Thanks,
Hussein

Code page issue - Unix file(s) content display in a report output

Hi All,
I am trying to retrieve file from Unix server and display in my report output.
I have written code as below:
OPEN DATASET filename FOR INPUT IN TEXT MODE ENCODING DEFAULT.
DO.
READ DATASET filename INTO i_tab-line.
ENDDO.
CLOSE DATASET.
1. Now i am able to display files of type .txt in report output but with line numbers above each line.
How can i avaoid it! I want to display as it looks in AL11 view.
2. If i am displaying files of type .PDF it is giving dump with below message:
A character set conversion is not possible.
At the conversion of text from code page '4110' to '4102' is not possible.
- a character was found that cannot be displayed in one of the two code pages;
- or it was detected that this conversion is not supported.
How can i display the .PDF (or) all types of files in my report as it is viewable in AL11.
Can anybody solve this this.
I have tried UTF-8 & NON-UNICODE options with ENCODE also they are also giving same dump.
Can anybody resolve these issues!
Thanks in advance.
Thanks,
Deep.

Hi All,
Any resolution for above posted issue!
Thanks,
Deep.

Urgent: Issue while displaying the PDF Reports Using XDO Common region

Hi all,
In our product code we are trying to display the PDF Reports, using the xdo common region.
Previously we were writing the pdf reports direclty onto the response direclty.
This displays the report onto the browser but if navigate throw browser back button, it doesn't displays the report as the response stream is empty while navigating through back button.
So to solve this issue, i tried to write the report using the OAHTMLWebBean and xdo common region. Here is the code:
ByteArrayOutputStream xdoOutput = new ByteArrayOutputStream();
XDOUtility.retrieveReport(xdoOutput,
parameters,
prop,
appMod
BlobDomain bxdoOutput = new BlobDomain();
bxdoOutput.setBytes(xdoOutput.toByteArray());
String redirectURL = DocumentHelper.getOutputURL(pageContext,
bxdoOutput,
"Report",
"PDF");
OAHTMLWebBean outRegion = (OAHTMLWebBean)createWebBean (pageContext, OAWebBeanConstants.HTML_WEB_BEAN, null, "IFRAME");
outRegion.setHTMLAttributeValue("src", redirectURL);
outRegion.setHTMLAttributeValue("width", "100%");
outRegion.setHTMLAttributeValue("height", "100%");
outRegion.setHTMLAttributeValue("title","Report");
outRegion.setHTMLAttributeValue("name","Report");
pageContext.getPageLayoutBean().addIndexedChild(outRegion);
This successfully displays the report in the XDO Common region. But now the issue is that there are hyperlinks in the Report displayed where from where the user can navigate to other detail pages.
When we click on these links, a new session starts in the xdo common region.
Is it possible that when the user click the links in the report displayed, instead of starting a new session in the xdo region, the detail pages is displayed with in the older session.
Regards
Sandeep

Hi all,
In our product code we are trying to display the PDF Reports, using the xdo common region.
Previously we were writing the pdf reports direclty onto the response direclty.
This displays the report onto the browser but if navigate throw browser back button, it doesn't displays the report as the response stream is empty while navigating through back button.
So to solve this issue, i tried to write the report using the OAHTMLWebBean and xdo common region. Here is the code:
ByteArrayOutputStream xdoOutput = new ByteArrayOutputStream();
XDOUtility.retrieveReport(xdoOutput,
parameters,
prop,
appMod
BlobDomain bxdoOutput = new BlobDomain();
bxdoOutput.setBytes(xdoOutput.toByteArray());
String redirectURL = DocumentHelper.getOutputURL(pageContext,
bxdoOutput,
"Report",
"PDF");
OAHTMLWebBean outRegion = (OAHTMLWebBean)createWebBean (pageContext, OAWebBeanConstants.HTML_WEB_BEAN, null, "IFRAME");
outRegion.setHTMLAttributeValue("src", redirectURL);
outRegion.setHTMLAttributeValue("width", "100%");
outRegion.setHTMLAttributeValue("height", "100%");
outRegion.setHTMLAttributeValue("title","Report");
outRegion.setHTMLAttributeValue("name","Report");
pageContext.getPageLayoutBean().addIndexedChild(outRegion);
This successfully displays the report in the XDO Common region. But now the issue is that there are hyperlinks in the Report displayed where from where the user can navigate to other detail pages.
When we click on these links, a new session starts in the xdo common region.
Is it possible that when the user click the links in the report displayed, instead of starting a new session in the xdo region, the detail pages is displayed with in the older session.
Regards
Sandeep

Error when trying to display a Webi report through the Folder iView

Hi all
I am getting the following error when Im trying to display a Webi report through the SAP Portal. We have installed the SAP Integration Kit and are able to see the content of the Infoview. However when we click on a Webi report, we receive the following error:
Could not get page number. (Error: RWI 00223) (Error: INF)
Have anyone else encountered this problem? Please assist! Any help will be rewarded.
(We are running XI Rel 2).
Addition from trace file (tomcat):
com.businessobjects.rebean.wi.CommunicationException: Could not get page number. (Error: RWI 00223)
     at com.businessobjects.rebean.wi.occa.OccaReportComAdapter.setBlobKey(OccaReportComAdapter.java:542)
     at com.businessobjects.rebean.wi.occa.OccaReportComAdapter.getView(OccaReportComAdapter.java:376)
     at com.businessobjects.rebean.wi.occa.OccaReportComAdapter.getView(OccaReportComAdapter.java:297)
     at com.businessobjects.rebean.wi.ReportImpl.getView(ReportImpl.java:384)
     at com.businessobjects.rebean.wi.ReportImpl.getView(ReportImpl.java:407)
     at org.apache.jsp.viewers.cdz_005fadv.viewReport_jsp._jspService(viewReport_jsp.java:1182)
     at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:94)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
     at org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:324)
     at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:292)
     at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:236)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
     at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:237)
     at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:157)
     at org.apache.catalina.core.ApplicationDispatcher.invoke(ApplicationDispatcher.java:704)
     at org.apache.catalina.core.ApplicationDispatcher.processRequest(ApplicationDispatcher.java:474)
     at org.apache.catalina.core.ApplicationDispatcher.doForward(ApplicationDispatcher.java:409)
     at org.apache.catalina.core.ApplicationDispatcher.forward(ApplicationDispatcher.java:312)
     at org.apache.jasper.runtime.PageContextImpl.doForward(PageContextImpl.java:670)
     at org.apache.jasper.runtime.PageContextImpl.forward(PageContextImpl.java:637)
     at org.apache.jsp.viewers.cdz_005fadv.report_jsp._jspService(report_jsp.java:325)
     at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:94)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
     at org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:324)
     at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:292)
     at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:236)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
     at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:237)
     at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:157)
     at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:214)
     at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104)
     at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520)
     at org.apache.catalina.core.StandardContextValve.invokeInternal(StandardContextValve.java:198)
     at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:152)
     at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104)
     at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520)
     at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:137)
     at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104)
     at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:117)
     at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:102)
     at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520)
     at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:109)
     at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104)
     at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520)
     at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:929)
     at org.apache.coyote.tomcat5.CoyoteAdapter.service(CoyoteAdapter.java:160)
     at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:799)
     at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.processConnection(Http11Protocol.java:705)
     at org.apache.tomcat.util.net.TcpWorkerThread.runIt(PoolTcpEndpoint.java:577)
     at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:683)
     at java.lang.Thread.run(Thread.java:534)
Furthermore I'd like to see an example of the cms_name entry. The documentation states: In addition, specify the Application Parameter for each iView. For this property, enter cms_name=[cms] for the fully qualified server name., but I have doubts as to what format to use.
Kind regards,
Martin Søgaard

Hi Jim Ji
The report can be displayed from the java infoview, no doubt, so the report itself works.
But the report cannot be seen from the "SAP Infoview" (:/businessobjects/enterprise115/sap) which is the infoview, I reference from the Folder iView (through the system in the SAP portal). And since the SAP Portal Integration Kit seems very old - the Folder iView was created 12-08-2004 by Ingo Hilgefort - there might be an old version of the jar-files somewhere in the installation.
I guess I should check the version of the jar-files in WEB-INF/lib of our web application (Tomcat) folder, and see if they have been overwritten by the SAP Portal Integration Installation or are an older version of the files in Program FilesBusiness Objectscommon3.5javalib? And also check if somewhere in the .../sap installation there are some old jar-files?
Kind regards,
Martin Søgaard

Display Image on report through Field Definitions Only File.

Hi all,
I have a report where I work with Field Definitions Only files (ttx).
These files are mapped to classes in code behind (csharp).
In code behind I make lists of these classes. Each list is set as the datasource of a subreport.
This works great!
My new goal:
Now I tried adding a picture to my report.
In the TTX file I added a BLOB field.
In the code-behind class I added a System.Drawing.Image.
My actual problem:
The class gets filled with the image, but the image is NOT displayed on the report
Does anyone know why this is happening?
How can I fix this? (should I use another Type in my class for the picture?) (should I format the picture in the report? ....)
Kind regards,
Wim

Hi AG,
Thanks for your response.
This is my TTX field:
Signature BLOB
I can't see the image in the report because I create the image in code-behind.
I think the problem doesn't occur in CrystalReports but in the conversion from my StrokeCollection (I use an InkCanvas [WPF] to capture a signature) to a ByteArray.
I am already one step closer to the solution. You can't just assign an object of type Image to the BLOB field of the report but it has to be a Byte-Array.
The problem I am facing now is that the picture is black after a conversion. (I see this when I export to disk and open the file in MSPaint).
The good thing is that CR shows me a black image so I guess CR is doing its job!
Kind regards,
Wim

PO Display in ME2J REport

Similar Messages

Maybe you are looking for