PO dont close with the GOODS RECEIPT

hi
We have this scenario.
there are some goods receipt PO based in a Purchase order xxx, but  the  Goods receipt  doesnt a base document and the PO xxx  is a open status.  The goods receipt show in the remarks "based on xxx purchase order" and we can send to PO xxx  to a new  goods receipt again and this one closed.  How do I link documents and the documente show close status to no duplicate the goods receipt. We have 2007 sp00  pl 05?
I´ve run the query in the sap note1152374  but we dont have any result.
Regards
NANCY HERNANDEZ

1.-When this error is generated is lost the link but also the PO document changes its status to open?
Is it possible? because de PO are open again
The PO is never closed due to lost link.  It did not open again
2.-check the logs and there´s no changes more than the creation of document
When the document creating, no log will create for anything changing from PO.  That is because they are different documents.
3 .- The scenario is replicable?, I can not generate the error again to explain to my costumer. How do I reply?
Yes, if you changes anything like warehouse, it will. (Even if you changed back to match the original!)) Let them to check out what are the differences between PO and GRPO.

Similar Messages

  • BAPI_GOODSMVT_CREATE, will do the goods receipt ( MB01 )for the subcontracting PO with batch management.

    Dear Professionals ,
    I Just want to confirm that whether BAPI "BAPI_GOODSMVT_CREATE " will do the goods receipt ( MB01 ) for the subcontracting PO with batch management.
    Since I will be passing only 101 mvy type in BAPi, will the system automatically call 543 mvt type with batch management and post the consumption.
    can I change the batch of the component items ?

    Hi ,
            Delivery note is like a ref document number
    so you can use the
    In the BAPI_GOODSMVT_CREATE There is header structure BAPI2017_GM_HEAD_01 which has a field REF_DOC_NO
    you can pass the delivery note value to that field .
    <REMOVED BY MODERATOR>
    Edited by: Alvaro Tejada Galindo on Jul 10, 2008 3:41 PM

  • 2LIS_02_SGR Valid Requested Delivery recorded with no Goods Receipt

    Please read message in its entirety before responding - I have done all my research.
    My company is wanting to report on quantities that have been scheduled for delivery but yet have not been received.  Why does 2LIS_02_SGR require a goods receipt to be available before posting a record?  I have 5 records available in EKET, take note that SCLQTY is the field in the dataSource that is populated by EKET-MENGE.
    EBELN        EBELP   ETENR EINDT      SLFDT      LPEIN MENGE                                                                               
    4500444313   00010   0001  04/12/2007 04/12/2007 1                4.000
    4500444313   00020   0001  04/08/2007 04/08/2007 1                3.000
    4500444313   00030   0001  08/01/2007 04/16/2007 1                1.000
    4500444313   00040   0001  04/17/2007 04/17/2007 1                6.000
    4500444313   00050   0001  04/10/2007 04/10/2007 1                4.000
    However when I run the extractor for 2LIS_02_SGR only 4 records are returned.
    Docno         line                                                               SCLQTY                                                                               
    4500444313    10    04/13/2007            04/12/2007    1            4.000 
    4500444313    20    04/13/2007            04/08/2007    1            3.000 
    4500444313    40    04/13/2007            04/17/2007    1            6.000 
    4500444313    50    04/13/2007            04/10/2007    1            4.000 
    OSS notes 739791, 617240,763547 state that you need a goods receipt in order to distribute the good receipt quantities correctly however the schedule line item is the driver not the goods receipt as one would think. 
    With those statements, the values in the OSS notes display this:
    SCLDT - 05/05/2004
    SCLTM -
    SCLNR - 2
    GMVPDT - 10/05/2004
    BELNR - 5000000002
    SCLQTY - 5 (schedule line quantity)
    GMVQTY - 3 (goods receipt quantity)
    OPNQTY - 2 (open quantity)
    TTLQTY - 3 (total assigned quantity).
    But why won't the extractor display like this?
    SCLDT - 05/05/2004
    SCLTM -
    SCLNR - 2
    GMVPDT - 10/05/2004
    BELNR - 5000000002
    SCLQTY - 5 (schedule line quantity)
    GMVQTY - 0 (goods receipt quantity)
    OPNQTY - 5 (open quantity)
    TTLQTY - 0 (total assigned quantity).
    I am unable to report this information correctly as I am missing the record I need.  Can anyone please help with this?  Is this just a short-coming of the extractor and there is nothing I can do about it?  Or should this extractor work like I have it above with only scheduled quantity populated and no goods receipts and I need to submit an OSS note?

    Hi
    You can check the BW: Transaction keys/Process Keys in ECC, by using SPRO Transaction Key , see the navigation
    Search for u201CTransaction Key Maintenance for SAP BWu201D.
    Select it and double click on Transaction Key Maintenance for SAP BW
    It will display the following screen with all Transaction Keyu2019s details; see for application component MM with
    Application 02.
    Thanks
    Reddy

  • Error while posting the Goods Receipt

    Hi Friends,
    I am having an issue while posting the Goods Receipt.
    I am getting the error "Balance not zero: 1.000,00- debit: 0,00 credit: 1.000,00". I am using the Purchase Order with Account Assignment category P and K. When ever I used the account assignment category, I am getting this type of error. I have checked the configuration and every thing is OK. System is not able to debit the G/L account which is mentioned in the Purchase Order, hence the problem. However, I think system is able to get the G/L account (to Credit the amount) from Automatic Account determination.
    Would like to know if any one come across similar type of problem and resolved it.
    We have recently upgraded the system from 4.7 to ECC 6.0.
    Apprciate the help.
    Thank you,
    Prakash

    Hi
    Thank you for the reply.
    I have checked what you have mentioned. While creating PO it is determining the G/L account automatically through the assignments in OBYC. Even then I am getting the error while doing the Goods Receipt.
    Any one is having any idea?
    Thank you,
    Prakash
    Edited by: Prakash KM on Dec 17, 2010 6:26 PM

  • Changing the G/L Account while Posting the Goods Receipts in MIGO

    Hi All,
    I have requirement in which G/L Account needs to be changed based on some validation while Posting the Goods Receipt in MIGO.
    I have created exit in OBBH by copying the standard SAP Program RGGBS800 in view V_T80D.
    I changed following entry in view V_T80D:
    GBLS     ZGGBS800     Val/sub:Exits for substitution
    Now Inside program ZGGBS800, I have written the logic to change the BSEG-HKONT value with the new G/L Account which gets called inside the standard function module G_VSR_SUBSTITUTION_CALL.
    FORM U999.
       DATA : V_HKONT TYPE BSEG-HKONT.
       clear : V_HKONT.
       SELECT SINGLE SAKNR FROM ZMASH1 INTO V_HKONT WHERE MATNR = BSEG-MATNR AND WERKS = BSEG-WERKS.
         IF SY-SUBRC EQ 0.
           BSEG-HKONT = V_HKONT.
         ENDIF.
    ENDFORM.
    After the execution of the above code the value of BSEG-HKONT changes with new value of V_HKONT but after this when I go further in Standard SAP code of function module G_VSR_SUBSTITUTION_CALL, there is one subroutine FORM EXP_TAB_009_BSEG  being called which changes the value of BSEG-HKONT to initial value of HKONT also while moving the data from BSEG to TEMP_STRUCT it doesn't passes the HKONT value, which I want it be passed as I want the changed value to be passed finally to OUT_RESULT. Please look at the code below.
    Following is the SAP standard code of subroutione FORM EXP_TAB_009_BSEG :
    FORM EXP_TAB_009_BSEG
             USING
               IN_ORIG STRUCTURE        BSEG
            CHANGING
               OUT_RESULT STRUCTURE     BSEG
               B_RESULT.
      DATA:  ORIG LIKE BSEG.
      DATA:  BEGIN OF TEMP_STRUCT,
             ABPER                          LIKE   BSEG-ABPER,
             AUGGJ                          LIKE   BSEG-AUGGJ,
             DOCLN                          LIKE   BSEG-DOCLN,
             FIPOS                          LIKE   BSEG-FIPOS,
             FISTL                          LIKE   BSEG-FISTL,
             FKBER                          LIKE   BSEG-FKBER,
             FKBER_LONG                     LIKE   BSEG-FKBER_LONG,
             GEBER                          LIKE   BSEG-GEBER,
             GMVKZ                          LIKE   BSEG-GMVKZ,
             GRANT_NBR                      LIKE   BSEG-GRANT_NBR,
             HKTID                          LIKE   BSEG-HKTID,
             HZUON                          LIKE   BSEG-HZUON,
             INTRENO                        LIKE   BSEG-INTRENO,
             MEASURE                        LIKE   BSEG-MEASURE,
             PARGB                          LIKE   BSEG-PARGB,
             PPA_EX_IND                     LIKE   BSEG-PPA_EX_IND,
             PPRCT                          LIKE   BSEG-PPRCT,
             PRCTR                          LIKE   BSEG-PRCTR,
             PRODPER                        LIKE   BSEG-PRODPER,
             PRZNR                          LIKE   BSEG-PRZNR,
             PSEGMENT                       LIKE   BSEG-PSEGMENT,
             SAMNR                          LIKE   BSEG-SAMNR,
             SCTAX                          LIKE   BSEG-SCTAX,
             SEGMENT                        LIKE   BSEG-SEGMENT,
             SGTXT                          LIKE   BSEG-SGTXT,
             SRTYPE                         LIKE   BSEG-SRTYPE,
             UZAWE                          LIKE   BSEG-UZAWE,
             XREF1                          LIKE   BSEG-XREF1,
             XREF2                          LIKE   BSEG-XREF2,
             XREF3                          LIKE   BSEG-XREF3,
             ZUONR                          LIKE   BSEG-ZUONR,
             ZZBUSPARTN                     LIKE   BSEG-ZZBUSPARTN,
             ZZCHAN                         LIKE   BSEG-ZZCHAN,
             ZZLOB                          LIKE   BSEG-ZZLOB,
             ZZLOCA                         LIKE   BSEG-ZZLOCA,
             ZZPRODUCT                      LIKE   BSEG-ZZPRODUCT,
             ZZREGION                       LIKE   BSEG-ZZREGION,
             ZZSPREG                        LIKE   BSEG-ZZSPREG,
             ZZSTATE                        LIKE   BSEG-ZZSTATE,
             ZZUSERFLD1                     LIKE   BSEG-ZZUSERFLD1,
             ZZUSERFLD2                     LIKE   BSEG-ZZUSERFLD2,
             ZZUSERFLD3                     LIKE   BSEG-ZZUSERFLD3,
             END OF TEMP_STRUCT.
      IF IN_ORIG = BSEG .
        B_RESULT = B_FALSE.
        OUT_RESULT = IN_ORIG.
        EXIT.
      ENDIF.
      MOVE-CORRESPONDING BSEG TO TEMP_STRUCT.
      OUT_RESULT = IN_ORIG.
      MOVE-CORRESPONDING TEMP_STRUCT TO OUT_RESULT.
      IF IN_ORIG = OUT_RESULT .
        B_RESULT = B_FALSE.
      ELSE.
        B_RESULT = B_TRUE.
      ENDIF.
      BSEG = OUT_RESULT.
    ENDFORM.                               " EXP_TAB_009_BSEG
    I need the value of BSEG-HKONT should be passed to OUT_RESULT-HKONT.
    I am not able to find any userexit or BADI for this.
    Please guide me on this.
    Thanks,
    Chandravadan
    Edited by: Chandravadan Jaiswal on May 8, 2009 2:18 PM
    Edited by: Chandravadan Jaiswal on May 8, 2009 3:45 PM

    Hi
    I also need to change hkont while posting MIGO and MIRO transaction..
    Any suggestion for this?
    Here's my problem.. Substitution of account(HKONT) when posting in MIGO/MIRO

  • Components were not consumed while posting the goods receipt through VL32N

    Hi Experts,
    We are into technical upgrade. We are upgrading from 4.7 to ECC 6.0. We are facing one issue. The issue is while posting the goods receipt for the subcontracting shceduling agreement through VL32N (Inbound Delivery) component materials were not consumed. While displaying the material document for the GR, could not find any compponent materials consumed with movement type 543, where as if I use the MIGO transaction code for the same inbound delivery, I could see the component materials were consumed with movement type 543.
    Could anybody tell us how to fix this issue if they come across.
    Appreciate your reply.
    Regards
    Bala

    Hi,
    Try checking below SAP notes
    Note 645119 - Problems with subcontracting using delivery
    338119 - Goods receipt in inbound delivery for SC order
    Hope this helps
    Reg
    Dheeraj

  • Packaging material is not appearing in the Goods receipt of STPO

    Dear All,
    We are currently dealing one Roll-Out project for one multinational company. In that from sales side, one of the main processes defined is u201CStock Transport Purchase Order processu201D. As a regular process, outbound delivery document also created with ref to STPO.
    As per the client requirement the u201CPackaging materialu201D needs to be added as additional line item in the delivery to calculate the packaging cost. This packaging material is a "Stockable and Valuated" material. So while performing the PGI the stock will get reduced from SD side.
    The problem is, using this same STPO delivery document the Goods receipt is planned to do in the another side of company code. while doing the Goods receipt system is displaying only the "Finished Product" only. The packaging material is not displaying while doing the goods receipt in the another company code.
    due to this we are not able to complete our test cycle.
    so we need the expert opinion to solve this issue.
    if the packaging material is added as additional line item while doing Goods receipt then, the problem is solved.
    Kindly suggest us...
    Regards,
    MANI
    frWe have customized that also and now u201CPackaging materialu201D is adding as a new line item in the delivery document as a non valuated material.
    But the issue is, the Billing type u201CZICu201D is not getting determined while creation of billing if u201CPackaging materialu201D is added as a new line item. If u201CPackaging materialu201D is not added as a line item then, billing type is getting determined automatically without any issue.
    We have checked in LIKP table, its containing the billing type as u201CZICu2019. But if packaging material is added then, the billing type determination is not happening.
    We are assuming that some customizing needs to be done from MM/SD point of view. I am seeking the experts help regarding this issue to solve the problem.
    Regards,
    MANI

    Dear Friends,
              Thanks for the Feedback.
    Even though it is a associated company, in one company code the packaging material stock was reduced and packed for the STPO shipment.
    After receiving the consignment, in the receiving company code they will perform the goods receipt with ref to "Outbound Delivery" document.
    Since in the outbound delivery document "Packaging material" also available. So as a business strategy we are expecting the same "packaging material" also should available for goods receipt.
    I hope i have explained with max of my knowledge to clear your doubt.

  • Wanted to block the Goods Receipt but not the Invoice Receipt

    Hi
    After the partial delivery of the Goods Receipt, i am manually setting the "Delivery completed" indicator in the PO. I dont want any future delivery against this PO. But it is allowing me to do a GR even though the Delivery Completed Indicator is set.
    How can i stop all the future deliveries agains the PO. But at the same time, is should not block the IR. I tried this by locking the PO item. It is not allowing me to do any GR after locking the same. But at the same it is not allowing me to do the IR also.
    Is there any way i can stop the GR, but do the IR for the purchase order ? Please clarify. Points assured.
    Thanks
    Venkat.

    Hello,
    If u maintain the latest GR date as a current date in the PO item level - delivery tab, then system will not allow to do further GR in future.
    Latest Possible Goods Receipt
    This is the latest acceptable date for goods receipt (GR).
    If goods are received after this date, you will receive either a warning message or an error message, depending on the system setting.
    If you receive an error message, you will not be able to post the GR.

  • MIRO Reference PO with many goods receipt

    Dear guru ,
    I enter an  incoming invoice for a purchase order.
    I have many goods receipt for this po , the system show all the goods receipt with their amount and quantity.
    If I must do a change to the value is hard to distribute the new value  for all the items.
    Does exist a chance to insert the value for the total of  all the goods receipts involved in order that the system execute an automatic splitting of the value for all the items ?
    Thanks

    Hello,
    Do you want to aportion the cost for delivery cost in PO depends on value of each line item?
    If they are unplanned delivery costs then this can be done as per following configuration.
    SPRO>Materials Management>Logistics Invoice Verification>Incoming Invoice>Configure How Unplanned Delivery Costs Are Posted.
    This setting is at company code level.
    Hope this was your question and it will help you.
    Deepak.

  • Automatic Payments-Offsetting Downpayments with related Goods Receipt-ECC6

    Dear all,
    We are using automatic payments (faa0) and creating a payment proposal to settle an invoice that has a downpayment posted for the same purchase order. The purchase order has a goods receipt posted against it.
    We are on version ERP2005 (ECC6) and use Funds Management (BCS). New functionality in Funds Management allows for the offsetting(clearing) of the downpayment by the goods receipt value. For example:
    You have created a purchase order for $200.
    You have created a down payment for $100 as below.
    Credit the bank account $100-
    Debit the vendor special G/L $100
    You then create a GR for $50. If this is a valuated GR and if you are using this feature, you get an additional posting like below in addition to the standard GR lines.
    Credit the vendor special G/L $50-
    Debit the vendor account $50
    The problem we are experiencing is when we have to perform the automatic payment. The payment proposal is picking up the downpayment and determines that it needs to be settled but then generates the following message:
    Message no. FZ347 - ...none of the payment methods defined can be used for these items
    In analysing the error message we did the following:
    1) Looked at remedies for customising settings for payment methods and payment groupings as per OSS note 164835 - F110 Clearing Credit Memos and Invoices - none of the remedies applied
    2) Applied a test on a downpayment with no goods receipt - The payment proposal was able to process downpayment and net it off against the invoice and therefore the problem solely relates to this specific scenario and not all downpayments.
    My question is whether anyone has managed to successfully create the payment proposal for the scenario described above and how they achieved it?
    Thanks.
    Regards,
    Shaun

    Hi,
    500000*9 is GR and 51*0020205 is IR
    GR/IR Commitment item- Find in the atttachment
    OF29-Find in the attachment.
    Thanks.

  • Substitution - Baseline Date to be replaced by the Goods Receipt date

    Dear Forum,
    We have the payment terms defined in the system, with the baseline date corresponding to the 'Document Date' and the credit terms as 60 Days. The users now desire that the Baseline Date should instead correspond to the Goods Receipt Date. To enable this we need to define the substitution such as the Baseline Date at the time of Invoice Verification gets substituted by the Goods Receipt Date, if the GR Date is earlier than the IV date.
    Would appreciate help from the friends as to how to configure this and which feilds to be chosen and replaced.
    Thanks!
    Regards,

    Hi
    You can make the Baseline Date in Invoice (MIRO) with Goods Receipt Date using BADI.
    BADI -->MRM_PAYMENT_TERMS
    Tell your ABAP Guy to work on this BADI.
    In the BADI,  MRM_PAYMENT_TERMS Read the Value in WEBUD of Internal Table TI_DRSEG and Pass it into E_ZFBDT.
    Also if the Baseline Date is changed manually, then after posting you can see the Goods Receipt Date in Baseline Date.
    This resolves your issue.
    regards
    venkat

  • Can't able to post the Goods Receipt in MB31

    I had create plant - 7177, Warehouse-I - 717 (For finished material) & Warehouse-II - 718 (For Semi finished material). While creation of finished material in MM01, i was entered the wherehouse no as 718. With this parameter, i cant able to post the goods receipt in MB31- For Finished Material. An error message appeared as "material not exit in the WH-717 in plant 7177". What is the procedure to solve this problem?

    Hi,
    In order header, go to goods receipt tab, check the storage location maintained. I think this storage location / plant combination is not linked to warehouse 717.
    Hope this answers your query.
    If helpful award points
    Regards,
    Vivek

  • Need RFC which can post the Goods Receipt

    Hi,
    My scenario is to post the Goods receipt, by using file and after posting the Goods Receipt i want the acknowledgement whether it is successful or unsuccessful. There is an idoc MBGMCR02 which can post the Goods Receipt but application acknowledgement is not possible in file to idoc scenario, so now i am searching for a RFC so that i can handle this situation using BPM synchronous process. Kindly suggest any RFC or BAPI which can post the Goods Receipt.
    Thanks & Regards,
    Venkat

    Hi Venkat,
    As per my understanding this is a "File To (Inbound) Proxy" scenario, in which you can use the BAPI "SD_SHIPMENT_POST_GOODS_ISSUE" to do the PGI into R/3 system.
    To perform this, you can go-ahead with the steps as mentioned below:
    Source (XI) System:
    1. Create the source & target data type in XI.
    2. Do required mapping in XI.
    3. In configuration directory, use the adapter type "XI" on the receiver communication channel.
    Target (R/3) System:
    1. Call transaction "SPROXY".
    2. Create the interface class (double click on Inbound message Interface, inside your namespace in R/3).
    3. Inside the class (proxy), create an internal table to keep all the records which will be coming from XI after your mapping.
    4. Pass all the data to above create internal table.
    5. Now, call function module "SD_SHIPMENT_POST_GOODS_ISSUE" and pass all required data from ur internal table to this FM (BAPI).
    Note: Kindly read about this FM (BAPI) first in SE37 under "Function Module Documentation".
    6. Do commit work after calling the FM (BAPI).
    I hope this will help you to resolve all your queries.
    Regards,
    Sarvesh Singh

  • Error when posting the goods receipt

    Hi we have recently successfuly updated 4.6 B to ECC 6.0.But when i am doing captive consumption by 949 Mvt. through process message system gives an error that
    Error when posting the goods receipt
    Message no. CB345
    Diagnosis
    With the selected process message, a goods receipt for the order was reported to the warehouse (destination ZPI1).  However, an error occurred when the goods receipt was posted.
    Please do needful.
    Regards,
    PP

    Hi Daniel,
    This is the first time i am coming across an issue like this.
    neverthless from a logical front,
    1. Remove Cost center as a valid receiver in Settlement Profile.
    2. Your OKB9 setting are pretty much good. No need to worry about it.  Becasue, OKB9 only will work if the system doesn't identify any other cost object. In this case Production Order is an automatic cost object which system should have taken.
    3. Check the Settlement rule when you have created Production Order. It should have been MAT.
    4. I hope you are creating Production Order with Material (using CO01 and not CO07)
    5. Make sure in OPL8, the default rule in controlling tab is PP1.
    Once all these are fine, i do not see any reason why you will get your probelm.
    Please check and revert back to me if the problem still persists.
    Best Regards
    Surya

  • How to stop the goods receipt before issueing the goods for production orde

    Frndz,
    I have created a production order, now before even making the issue of rawmaterials from the inventory the system is allowing the goods receipt for that production order , kindly tell me the step by step procedure to check it.
    Regards,
    Srini

    Hi Srini,
    there are couple of ways to handle this situation..
    1. If you set all the components as Backflush relevant in Material Master or setting all Compoents tick in OPK4 will ensure that at the time of confirmation you will have all the components will be done auto GI.
    Now in your control key or Prod. scheduling profile specify that Auto GR.
    Now your GR & GI are linked.
    In OPK4, in the 2nd Tab page, termination of Goods Movements and Goods movements Ticked, so that when ever there is a problem with the components system will terminate the Confirmation.
    So there will not be any GR without GI.
    But, one can make GR with MB31 or MIGO
    (So this is an option but no fool proof method).
    2. Activating the User Satus (Status Profile) so that once the GI is done only you allow the Confirmation.
    (The settings we can discuss if required).
    3. Having the Use Exit..
    Enhancement - MBCF0002
    Functional Module - EXIT_SAPMM07M_001
    Include - ZXMBCU02
    Refer below links for further details..
    do not confirm without goods issue
    default quantity of confirmation(co11) should allowed in goods movements mb
    Revert for further discussion..
    Regards,
    Siva

Maybe you are looking for