PO - Error in process at SRM

Hi SAP Guru's
SRM 5.0
Extended Classic Scenario
CCM 2.0
The PO is " Error in process " at SRM.
When see in TC RZ20 - getting the below error message:-
PO 70000XXXXX: No instance of object type PurchaseOrder has been created. External reference:
PurchOrder 70000XXXXX: Purchase order still contains faulty items
PurchOrder 70000XXXXX: Net price must be greater than 0
PurchOrder 70000XXXXX: Transfer failed
when check via Function Module BBP_PD_PO_CHECK.... No error comes.
Even after executing FM - BBP_PD_PO_TRANSFER_EXEC ....same error comes in the RZ20
Can any one advice ?
Edited by: SAP jayoti on Dec 10, 2010 10:35 AM

Hi Kiran,
Many Thanks for the reply.
I would like to inform you that its a Development server and just one n a half month back it was working perfectly fine.
Suddenly it started giving the problem although the Last PO which was approved and posted to backend was on 27.10.2010 ( i.e. In the month of October2010) successfully.
I am supprised like how come there is a need of applying SAP note on this since it was working perfectly fine one and half month before .
Well we have craeted SC and PO craeted successfully till 27th October 2010 , after that we have tried now in the month of dec its giving the Error in Process PO .
Well we have found the below notes :-
Seems to some OSS Note is missing in either you R/3 backend or the SRM system ->
Note 841021 - Manual price entered disappears - error 06 218
Note 932236 - BAPI_PO_CREATE1: Purchase order price unit not transferred
Note 580225 - Purchasing BAPIs: Conditions and pricing
Note 853970 - BAPI_PO_CREATE1: Net price is not transferred
Note 571860 - BAPI_PO_CREATE1: Price is not transferred
Note 487605 - ME21N: 06 218 'Net price must be greater than 0'.
Can you please advice which one you were taking about ?
Or is there any other way apart from applying SAP notes ?
Edited by: SAP jayoti on Dec 10, 2010 12:23 PM
Edited by: SAP jayoti on Dec 10, 2010 12:24 PM

Similar Messages

Status message shows " Error in Process" in SRM

Hi,
At the time of Confirmation, status message shows " Error in Process " in SRM.
So please suggest the solution & the possible cause for the Error.
Thanks,
Neha

Pl goto RZ20, SAP Enterprise Buyer monitor--confirmation and open the alerts.
All error logs have to be there. How will you analyse otherwise as to what went wrong?
Have you done the partner profile settings for confirmation? Defined ports in SRM? Are you on classic/extended classic?
Nikhil

Error in process in SRM

Hi Experts,
Can anyone tell me hwo to resolve this problem?
This is classic scenario, version 4.0
The user has raised a shopping cart without assigning vendor to it, so it has gone error in process as we dont have the Purchase requistion scenario.
I have now assigned a vendor in the shopping cart by going to the sources of supply tab and giving my vendor in the preferred vendor and then ordered the shopping cart still I the approval and follow on documents are in errors and not able to generate an order
Please suggets some FM or some solution thru which I can generate an order, I have used the following but not able to generate an order .
I tried by BBP_PD_SC_RESUBMIT -FM
BBP_REQREQ_TRANSFER - FM.
BBP_PD_SC_TRANSFER_INTERNAL.
but the problem is not yet resolved.
Please suggest.
Regards
Srujank
Edited by: srujan K on Apr 29, 2009 11:36 AM

Hi Muthu,
Thanks for your reply
I m sorry there is no error related to this particular, as I could replicate the same secanrio in Test system.
Actually we had maintained the PR number ranges in the SRM system and not maintained in the SAP R/3 system, so if at all any data is incomplete it should create a PR, but as the number ranges are not available in R/3, so it throws an error for the same.
All the rest UOM and other factors are ok.
Only when I m try to resubmit it it is not changing the approval status or follow on document history.
Can please suggest on this !!!
Regards
Srujank

Error in process -in SRM not able to generate a PO in R/3

Hi Experts,
Can anyone tell me hwo to resolve this problem?
This is classic scenario, version 4.0
The user has raised a shopping cart without assigning vendor to it, so it has gone error in process as we dont have the Purchase requistion scenario.
I have now assigned a vendor in the shopping cart by going to the sources of supply tab and giving my vendor in the preferred vendor and then ordered the shopping cart still I the approval and follow on documents are in errors and not able to generate an order
Please suggets some FM or some solution thru which I can generate an order, I have used the following but not able to generate an order .
I tried by BBP_PD_SC_RESUBMIT -FM
BBP_REQREQ_TRANSFER - FM.
BBP_PD_SC_TRANSFER_INTERNAL.
but the problem is not yet resolved. Ours in N-step approval badi.
Please suggest.
Regards
Srujank

Hi Daniel,
Thanks for your reply !!!
I m sorry , I have already tried that actually, but didnt not work. Actually the shopping cart is already approved for that I have made changes and re-submitted .
the workflow is WS14000133, and N-step approval with Badi implementation.
so i think this is not allowing me to change.
Regards
Srujank

How to clear status "Error in process"?

Hi All,
I need help to clear the status of my invoice in SRM. The invoice status is "error in process". We checked in backend and reprocessed the IDOC through WE19 instead of BD87 and the invoices are posted now in backend. But the status of the invoices still shows "error in process" in SRM. I do understand that we should not use WE19 and should have processed it through BD87.
I checked in SRM and the enteries exists in BBP_DOCUMENT_TAB table for these invoices, just tried to run CLEAN_REQREQ_UP and BBP_GET_STATUS_2 but no help.
Please help
Thanks, Sachin

please read all below
An IDoc BBPIV is sent if an invoice is released in the BBP system.In the invoice the statuses I1022 "Release granted" and I1017 "In transfer" are set.In addition, for the background job (see below) an entry is written to table BBP_DOCUMENT_TAB.
Unless I1017 is not set again to inactive, all previous operations are not allowed (in particular all changes to the invoice), that is, they are stopped by the program. The sending of the IDOC is checked by the background job CLEAN_REQREQ_UP. The report reads the BBP_DOCUMENT_TAB and makes a RFC (remote function call) per META_GOODSMVT_UPDATECHECK to check the posting of inbound IDocs.If the IDoc is posted successfully (status 53), the BBP invoice receives status I1018 "Transferred to backend".In addition, the entry is deleted in BBP_DOCUMENT_TAB.
If the IDoc is posted incorrectly (status 51, no follow-on document), the status of the invoice is set to I1019 "Transfer failed".The entry in BBP_DOCUMENT_TAB remains as is, that is, the status of the IDOCs in the backend system is still checked by the background job.The sending of the IDOC is checked by the background job CLEAN_REQREQ_UP.If the IDoc has not (yet) arrived in the backend system, the entry also remains as is.
Status I1018 allows to reverse the invoice in the future. In case of status I1019, a deletion is (again) possible.
The following must be considered when processing an incorrect IDoc in the backend system:
a) Further process the same IDoc (BD87), instead of copying and correct the IDoc with Transaction WE19 since in the latter case, the background job cannot find the (copied) IDoc and the invoice posted from that. In this case the BBP invoice would remain endlessly in status "incorrect", the entry in BBP_DOCUMENT_TAB would never be deleted and the background job would always make the RFC at every run.In addition the BBP invoice would never receive the status "paid" (see below).
b) If the IDoc cannot be corrected or the error in the backend system cannot be solved, the IDoc remains in status "incorrect".In this case the BBP invoice should be deleted and the entry in BBP_DOCUMENT_TAB should be deleted manually or with a self-written report.
Additional information: As of EBP Release 4.0 or after the implementation of Note 601470 or the import of the relevant Support Package, the entry in BBP_DOCUMENT_TAB is deleted by the program (during the deletion of the invoice). Then the manual deletion is no longer required.
The following section does not correspondingly apply to the confirmation, but only applies to the invoice.
Status I1020 "paid" is set in the invoice by using the second background job BBP_IV_UPDATE_PAYMENT_STATUS to check the payment status of the follow-on invoice in the FI backend system for all invoices from the selection area.This only occurs for BBP invoices with status I1018 "Transfer to backend". To read the FI documents, META_FI_DOCUMENT_READ_40B is used.

Purchase Order in SRM Error in process

Hello ,
We are using extended classic scenario . SRM 5.0 , ECC 6.0.
There is a PO on SRM with status 'Error in Process ' in process .But I checked the line items of the POs. PO has been successfully created and also transfered to ECC for all the line items. In ECC too the PO is visible.
Then why the status of the PO is not 'ordered' ? How can I do to change this status to 'ordered' ?
Please let me know how to find out the root cause of the issue as well as how to resolve the same .
Regards,
Saurav

HI,
Could you please tell me, how did you solve this issue. I'm having the same type of issue.
Creation of shoppingcart thro'MDM catalog. It is approved. Local Purchase order is not getting
created because of the following error and it is not replicated to the ECC 6.0.
in Application monitor in SRM 7.0 Portal screen.
1. Backend error: Enter G/L Account
2. Purchase order still contain faulty items.
3. Issue with error showing Sum of Quantities >1.728< larger than total quantity
PO Status is'error in process'
Regards,
Anjan

Multiple a/c assgt SRM PO - Error in process

Hi all,
SRM 5.0 SP 12 ecs
When I create a purchase order with mutliple a/cassignment in SRM and order it,it gets replicated to ECC with the indicators "Confirmation-Related Invoice Verification" and "Confirm Performance of Service/Goods Receipt " checked as per the vendor master.
However if I change these indicators in this PO,the PO is set to "Error in Process" and then on ECC side,I see the error "Goods receipt posted unvaluated due to multiple account assignment".
How do i process this PO further in SRM ???
Thanks.

Hi ,
I have checked it intially and both are identical.
Initialy the problem was, user had entered 128 times AA line items ( added & deleted ) in the PO while in the SC it was having only 64.... Our system accepts line items till 99 , so i asked him to delete the items above 99 ..
So after that POs error has gone and it went for approval..
But after approval it again went into error in process
Sheetal

PO Output is possible for SRM PO's in status Error in Process

Hello All ,
We have a requirement, where system should not process the PO output when the PO is in u201Cerror in transfer status u201C .
While creating the PO -> If the SRM PO is in Error in Process status, output will be processed and its sent to vendor also.
Since Error in Process status in business point of view consider as error free PO but fails to transfer the PO to back-end due to some technical or customization.
While changing the PO -> if the SRM PO is in Error in Process, We can stop the process the output with the help of OSS Note 1324180 which has been already implemented.
Can anybody tell me how can we achieve this . Any pointers. We have also tried with condition based output workflow start conditions also .but it couldnu2019t work .
Thank you
Bharathi

Dear Expert,
Please check in RZ20 what specific error is being shown and accordingly either error message can be changed to warning message or customization should be done so as to replicate the PO into backend.
Thanks and Regards,
Sathya Kumar.

SRM PO Changes Error Status - Error in Process (SRM 4.0 and ECC 5.0)

Hi All,
I created PO in SRM from Sourcing (Shopping Cart) and it is replicated to Back End (ECC 5.0). But I did not post GR or Invoice Verication with reference to PO.
When I am trying to change PO in SRM (SRM Webbrowser - Processing PO) like Quantity, I am receiving the PO status as Error in Process.
Please let me know do I need to configure anything for this issue or need to implement OSS Note/BADI.
Thanks a lot in advance for helping me.
Best Regards,
Sudarsan

got solution

PO:Error in Process while transferring to backend (ECC 6.0) from SRM 5.0

Hi folks,
We are on an Extended Classic Scenario. We have a major problem occurring in Production system only for the the limit orders. Limit Orders are not getting transferred to ECC 6.0 from SRM (Error in Process clearly shows the non existence for PO created first time)
I also know that Error in Process/ Transfer Failed status comes up for several causes.
This was working fine for months together, suddenly this problem is coming up. 1 Week back we had a Patch Upgrade too. I have checked the Vendor data, Account Assignment and other Basic data too and everything looks fine. We have tried debugging the FM's on SRM side which transfers the PO(ex:BBP_PD_PO_TRANSFER_EXEC_V2)
After debugging too we are not able to rectify from where the error is coming up..
I need your valuable inputs on this.
Thanks a lot in advance.

Thanks a lot on your Key inputs Peter.
I just forgot to mention one more thing, i.e., in RZ20 (SRM) we could see the following errors for limit orders:
(01) PurchOrder 003....012: Transfer failed
(02) PurchOrder 003....012: Please maintain services or limits
(03) PurchOrder 003....012: Purchase order still contains faulty items
(04) PO 003....012: No instance of object type PurchaseOrder has been created. External reference
To trace the issue backwards we tried creating a limit order PO directly from ECC backend (ME21N Transaction)
One thing we could observe is in Limit tab if we not specify Expected Value and Overall Limit we are encountering the same error as shown up in RZ20.
This gave us a vague idea that the price is not getting transferred for Limit Orders from SRM 5.0 to ECC 6.0 backend. Any key inputs on specific FM etc.,to debug and see what value is getting transferred from SRM to ECC would come handy.
I hope Peter and others will help me on this.

Invoice status in SRM -- Error in process

Hi,
I am on SRM6.0 (Extended Classic Scenario) with backend ECC6.0. I have a invoice posted in SRM and went into error while transferring to backend. We reviewed the reason of backend error (it was because of MM period close) and reprocess the IDOC in backend after allowing posting in previous period. IDOC got processed and we can see the backend document link in SRM Invoice now but the status of the invoice is still "Error in process".
I checked program "BBP_GET_STATUS_2" and "CLEAN_REQREQ_UP" is setup correctly and running sucessful in SRM. Appreciate any help to resolve this issue.
Thanks,
Sachin

Hi All,
Any updates. Today I have another invoice where the IDOC got posted in backend sucesfully but system still shows invoice status as "Approved" whereas it should be "posted in backend".
Thanks, Sachin

SRM PO Status "Error in Process"

Hi,
SRM 3.0 Extended classic scenario
EBP Purchase order goes in to Status "Error in process" after making some ammendments.
Getting following error
1) EEP\Business to Business Procurement(100)\...\Purchase Order\Backend application errors
2)Business to Business Procurement(100) Purchase Order Backend application errors ACTIVE PurchOrder xxxxxxxxxx: Please specify a valid account assignment
3) Business to Business Procurement(100) Purchase Order Backend application errors ACTIVE Purchase order xxxxxxxxx: Instance xxxxxxxxx of object type PurchaseOrder c ould not be changed
Can you please suggest what are the setting i need to check, actuallly the changes is not reflecting in to backend.
Thanks,
Jairaj

Hi,
Thanks for reply,
It is a service purchase order and changes made to them is delete and undelete the service line items not updating in to back end,
below is details fo error log.
1) javascript:displayTools('bbpadm_poappli/!?PARAM1=CE5C79FAF918944F9F4F968D8CF25D9E&PARAM2=6500010389&PARAM3=Pleasespecifyavalidaccount+assignment&PARAM4=BBP_PD_PO_TRANSFER_EXEC&alert_ALSYSID=EEP&alert_MSEGNAME=SAP_CCMS_esccebp_EEP_00&alert_ALUNIQNUM=0002283846&alert_ALINDEX=0000001660&alert_ALERTDATE=20090206&alert_ALERTTIME=092614&alert_DUMMYALIGN=&alert_MESSAGE=PurchOrder 6500010389: Please specify a valid account assignment&CTR_URL=test1', 'tools')
2. javascript:displayTools('bbpadm_poappli/!?PARAM1=CE5C79FAF918944F9F4F968D8CF25D9E&PARAM2=6500010389&PARAM3=Instance6500010389ofobjecttypePurchaseOrderc&PARAM4=ouldnotbe+changed&alert_ALSYSID=EEP&alert_MSEGNAME=SAP_CCMS_esccebp_EEP_00&alert_ALUNIQNUM=0002283847&alert_ALINDEX=0000001659&alert_ALERTDATE=20090206&alert_ALERTTIME=092614&alert_DUMMYALIGN=&alert_MESSAGE=Purchase order 6500010389: Instance 6500010389 of object type PurchaseOrder c ould not be changed&CTR_URL=test1', 'tools')
Please advice.
Regards,
jairaj

Purchase Order going into Error in process while ordering from SRM.

Hello All,
We are facing a typical issue where the PO is going into error while ordering from SRM. The error message is ' 17.09.2010 12:45:35 Purchase order XXXXXXX: G/L account XXXXXX cannot be used (please correct ) '
Is there any mechanism/tcode where we can list out the Backend errors in SRM?
We are using SRM 4.00.
Thanks.
Rgds,
Arnab

ask your FI /CO consultant
since there are different types of GL accounts like expense , inventory .
so he can guide you well what GL account is correct
as well check product category vs gl account configuration.

P.O Error in Process after copying the existing item in change mode

Hi All,
We are in SRM 5.0 Server 550 and SP15 and are using Extended Classic Scenario.
We are facing a peculiar issue, when an already created P.O (Free text - goods) is changed and a new line item is added either manually or by copying the existing line item and then ordering it, the P.O is going into Error in Process status.
This is happening only when i am adding a new item (material) to the existing line item (material) but when i am adding a service line item in the change mode to the existing material line item, the P.O is getting ordered without any issue.
I believe this is SAP bug and raised with SAP for OSS.
Meanwhile i would be grateful if you can provide any resolution to this issue and provide any OSS note number (If one already exists).
Regards,
Teja

Hi Teja
it works fine for me.
old po template..
taken describe procureemnt - goods
copy the line item
changed qty and price
POs created for both items in one PO since vendors are same?
what the error message says in the application monitor or rz20 / monitor sc.?
for me i had a contract in my pld pos.(sc).
muthu

Error in Process confirmation editing

Hi, Experts,
One of the users did a confirmation and got Error in Process status.
I know that he can change this confirmation thru Display and Process Confirmations Centrally ,
but the client doesn't want me to add the user this role.
Is there another way to change this confirmation? May be, something with authorizations
but not adding the central confirmation.
Good Day,
Rami Kleiman
SRM Consultant

Hi,
If it is Material confirmation, check the idoc status.
regards,
MRao

PO - Error in process at SRM

Similar Messages

Maybe you are looking for