Po event terminates well but PO still blocked.

Hi,
I have a Po that got blocked in release. Manual release are working fine. Only this PO is blocked and all copies of this Po are blocked in development.
All event linkage are fine, no conditions in triggering. Workflow container has flag set for relese. But PO still dosent rleased. Manual release is possible but the workflow doesnt work for this PO.
Any hint as to what should be the next step or has someone ever faced this problem. No error in the workflow logs. Workflow terminates well and I can see PO is released as per the logs but not actually! Can you think of an authority issues?
Any direction, any help would be helpful.
Thanks in advance.
Manoj.

Hi Rick,
I just found out its task no. TS96100007. Not sure if this is a standard or a customised one. Using method ZBUS2010---> Release method. This method uses fm:- 'Bapi_po_release'.
And there are no terminating events mentioned on the task.
And also one thing that I found that the PO gets blocked only for the combination of doc. type and vendor. Same vendor works for other PO. Same doc. type too works for other values.
So based on above information can we be sure its not a workflow issue and only a functional issues. Also in SWEl I can see event released for the PO those are released but not for the ones that are blocked.
We have ents triggering are 'releasestepcreated' for both but released only for the ones that are successfully released. This step that releases the Po is not avalibale in the log, so not able to update about the container values.
Thanks,
Manoj.

Similar Messages

Unrestricted stock, but qm still blocking

Hi!
WE want the system to make inspection lot for some HAWA materials, but without blocking stock. We configured inspection type 01, post to insp. stock NO, inspection for HU - yes. Now when stock comes in, inspection lot is created, the stock is posted to unrestricted, but we still can't use the stock for sale until we make UD - we looked in table behind and we see that the stock doesnt' get VMENGE01 untill UD is accepted.
What else must we configure to be able to use the stock immediately, before making UD?
Thanx!
Meti

Meti Vidmar wrote:
Hi!
>
> WE want the system to make inspection lot for some HAWA materials, but without blocking stock. We configured inspection type 01, post to insp. stock NO, inspection for HU - yes. Now when stock comes in, inspection lot is created, the stock is posted to unrestricted, but we still can't use the stock for sale until we make UD - we looked in table behind and we see that the stock doesnt' get VMENGE01 untill UD is accepted.
>
> What else must we configure to be able to use the stock immediately, before making UD?
>
> Thanx!
> Meti
Here you have selected inspection with HU = yes that means your stock is HU managed and it is subject to inspection.
Now you have selected post to insp stock = NO, but you have selected insp eith HU. So system will post stock to UNR but if stock is HU managed then you have to release HU seprately, which you can do either fomr inspection lot HU stock posting tab or transaction HUMO.
Hope this helps to understand.

Sophos uninstaller says "Sophos Anti-virus is not installed" but sophos still blocks websites.

Hi, I downloaded the free (trial?) version and didn't like it blocking websites. I dragged the app to the trash and, of course, it didn't uninstall. Looked it up and got a (I think there are more than one) remove tool for sophos but it says it can't find sophos on my MAC. Yet, when browsing the internet, sophos still blocks websites. Any suggestions? I'm a little frustrated. Thanks in advance, Willie

Hi Willie,
Sorry you're having trouble. If you uninstall by dragging the app to the trash instead of using the remove sophos tool, this sort of thing unfortunately tends to happen.
One thing I wanted to mention is that if you don't want Sophos to block websites, you can actually disable the web filtering feature. All you have to do is click the sheild icon > preferences > web protection and toggle the switch to 'off.'
Another question, I was just curious if you were having trouble with Sophos blocking sites that you thought were safe? We should only block you from accessing malicious websites, so if we were interferring with accessing "regular" sites, you can let us know which sites were incorrectly blocked, and we'll take another look at it.
All that said, if you just want to remove Sophos there's a couple things you can do.
1. Restart your mac, reinstall Sophos, and then once it's working properly, use the 'Remove Sophos Antivirus' app to remove it
2. Manually remove Sophos
- Open Activity Monitor and stop any processes with "Sophos" in the name
- Open Finder, and remove everything in the following list:
/Library/Sophos Anti-Virus
/Library/LaunchDaemos/com.sophos.*
/Library/LaunchAgents/com.sophos.*
/Library/Preferences/com.sophos.*
/Library/Logs/Sophos Anti-Virus.log
/Applications/Sophos Anti-Virus.app
/Applications/Sophos Remove.app
/var/db/receipts/com.sophos.*
Note: You'll need administrative rights to remove most of those files. Then reboot, to ensure everything is cleared from memory too. Then run through the list again, to ensure you got everything.
Warning: Be cautious when deleting things in some of those directories. Not everything in there is related to our software - our files contain the name "Sophos".
Hope that helps, let me know if you have any trouble!

Calendar events never appear but are still there, just hidden soomehow

A new problem has popped up and it's a weird one.
Suddenly any calendar events I add never appear.
Before, i'd get a green dot on a date indicating a meeting or something was set. Not anymore.
If I set a event and save it, no green dot.
If I go to the events button immediately after saving one, it says my schedule is free.
If I do a search for the event I just saved, nothing comes up.
But:
I still get the notice on the screen to remind me of the event (it's usually 24 hours before) and my alarm still goes off an hour in advance just as it was saved.
This is a problem.
I cannot check events I saved and if necessary change them or know they are upcoming because nothing appears. It also means I won't be notified if I set an event that conflicts with another. This I know for sure because when the problem arose I set the same appointment six times and was not once informed it conflicted with a saved event (that was aced numerous times before) in the end I (correctly) guessed it was actually saved, just not appearing. But this has to be fixed.
This is new. It didn't do this a few weeks ago, and I have not done anything unusual with my blackberry, unless it updated the OS w/o my knowledge and messed it up. I cannot be the only one experiencing this, but what fixes it!?
Crazy problem

Local calendar (set as home with an orange dot) and my name under my email address (green dot)
I never set these up, it appears to have been a default setting. I only discovered these settings when I was trying to investigate the problem. Home (orange dot) was OFF and my name under my email address was set to a green dot and ON. Now, to get my events to appear I must have the home orange dot on. If I turn it off my events go away even though my green dot next to my name has always been on. If I look on my calender I can see this weird setting change took place someplace a week ago because up until days ago, the green dots are all over my calenders and now only an orange dot will appear, so somehow the calender has begun to ignore my email and my name as what was once a default (that I never set up myself)

Not Running on the Event Dispatch thread, but UI still freezes

The environment: I am currently working on an application that requires some heavy lifting in response to user input on a UI. To do this I am using a version of SwingWorker that was backported from java 1.6 to java 1.5 in conjunction with a slew of custom threads.
The problem: I am currently running into an issue where I am not operating on the Event Dispatch thread (checked by doing a javax.swing.SwingUtilities.isEventDispatchThread()) but the UI is still freezing during this section. The operation involves a loop with about 2000 iterations and contains several file accesses. I have thought about how to make a new thread to perform the same operation, but I do not see how it would be any different since as it is I am not on the EDT. The call is being made from doInBackground and specifically the piece that is slowing things down is the File Accesses (2 for every iteration of the loop). At this point I am not sure how to go about resolving the issue. Any one have any suggestions?

I am not operating on the Event Dispatch threadThat is the problem. Use multiple threads for GUI, which should delegates to the EDT, and your app logic.

Calnder EVENT sync well but alret is not there on iphone

in mac i add event to calender and i have set default alert time which is 30 mins.
see you can see alert shows me on right hand top corner also in MAC
i sycn my iphone with icloud so i recieve event on my iphone but it dont shows me alert.
see here there is no Alert showing in iphone

Donovan, I have the exact same issue. I've tried everything I can think of, including a soft reset of the phone and nothing has worked. I have a late 2012 13" MacBook Pro, but am running Mavericks 10.9.1. Hoping someone out there has a fix!

BCD_ZERODIVIDE corrected but qRFC still blocked

We encountered a BCD_ZERODIVIDE error when a user attempted to set up an output type not designed to handle credit memos or price adjustments.
The code was changed to handle the division by zero. However, the qRFC is blocked. When I try to re-execute the item, it errors out saying: "Update terminated."
We use Vertex and I am hesistant to delete items our of this queue so we won't be off on our taxes.
Can anyone help troubleshoot?
Thanks!

Thank you-I will contact support.
No, I cannot wait 90 days.
Let me restate what I have to endure, even though I own the music and have paid for iTunes Match:
I cannot access my purchases-zero-at all
I have to listen to never ending McDonald's latte commercials and progressive insurance. I have now banned both of those annoying businesses and will not make purchases there.
In summary, I have given apple my minded, and have zero to show for it.
Ps-you get to hear the McDonald's "love hate commercial" every 2 songs on iTunes Radio. I have substituted the words where I hate McDonald's and love when the commercial is over.

I am having issues with my popup blocker blocking a site, but my popup blocker is disabled.

I am trying to access this site for my college class. It asks me to disable my popup blocker for access to the site, which I have done, but it still blocks my access to the site. I used Firefox last semester and I did not have any problems, do you have any advice? I did go in and make sure that the popup blocker was disabled, and then restarted my browser, but I do not know what else I should try. *Please note that I could very well be doing something wrong......but any advice you could give me would be great! I really do not want to use Internet Explorer if I do not have too, I love Firefox so much better! Thanks for taking time out of your day to help me :)
Cami

Hi Cami, in your system details it seems you have MySearchDial extension inactive, maybe the problem is there. MySearchDial is malicious software(browser hijacker), see if you have it in your win 7 and uninstall it (Start button > Control Panel > Programs > Programs and Features > Uninstall.)
see also :
* http://www.mysearchdial.com/removal-instructions/
* http://malwaretips.com/blogs/mysearchdial-toolbar-removal/
also '''delete''' in your [http://kb.mozillazine.org/Profile_folder_-_Firefox#Windows profile folder] the [http://kb.mozillazine.org/User.js_file User.js file] you have.
The user.js file '''does not exist by default'''. If you create the file, forget it, if you have not create the file then delete the User.js file, to see if the problem goes away (some programs create and write in the file also).
thank you

Help! Event content disappears, but still remains in Finder package

Hi guys,
I'm totally stumped here. It seems FCP 10.1.1 has some sort of bug that makes content disappear. Here is what has been happening:
I upgraded back when 10.1 was released, and everything seemed fine. Around 10.1.1 I decided I wanted to move some things around. So I would click on an event inside of a Library, and I would drag it into another Library. Sometimes it would work great. Sometimes FCP would freeze, beachball, and fail. Sometimes I would leave it for 30 minutes or so just in case it was just doing something. I would eventually have to Force Quit.
The problem? The events that were to be moved didn't show up in the libraries they were supposed to go to. Not in FCP, and not in the Finder. Instead, they stayed where they were coming from. In FCP, these events no longer had any content in them. Also, they lost the purple star that would be next to events. If I went to that same event inside of the Library (Show Package Contents) ALL content was there. All the clips, the transcodes, the originals...everything. Yet, FCP wouldn't "see" it or display it.
I thought I had a workaround - copy the original files in those events to the desktop, then reimport them into a new event. Well, that does work IF it was an event that was waiting to be edited. But if it was mid-edit, of course, now all I have is the original clips, but no access to the project or edits.
And now, it seems to just "happen." I will quit FCP and then relaunch it again when I need it, and I will see another event or two in a library has lost its purple star and no longer has content in it! No idea why or what's causing it. I'm on a new Mac Pro, plenty of RAM (64GB), plenty of space, etc.
Additionally, when I quit FCP it's normally because the browser window stops updating. What I mean is, I am clicking around between events or libraries looking for clips to add to a project. Then, at some point (and this is random, haven't seen a patterns of it always occurring on any particular event) the browser gets "stuck" on an event. I can click on another event and it will be highlighted as active, but the browser window is still displaying the last event I was in. It isn't frozen, as I can still scroll, look at the clips, etc. At this point, no matter what other event I click on, I am "stuck" with the event browser displaying the contents of that event. So, then I have to quit the app and restart it...and I might find that another event has randomly lost all of its clips and projects.
Again - in the Finder if I go into the Library package and look in that event folder, EVERYTHING is still in there, nearly organized in the folder structure - yet there is nothing I can do (that I know of) to get FCP to see and display it.
Totally lost now, and scared to keep firing up FCP for fear or losing even more work...but yet, I have to because this is my job! Any help?

This kind of problem seems to indicate that somehow the changes you made were not correctly registered in the library's database. This is stored inside the library in a file with .flexolibrary extension.
A possible solution is to force FCP X to rebuild it. This method has worked on several occasions, but of course there is no guarantee. You may want to make a copy of the affected library before attempting the following.
Locate the library in the Finder (control-click, Reveal in Finder);
Quit FCP X;
(At this point, you may want to make a duplicate of the library, just in case)
Control-click the library and "Show Package Contents"
Locate the .flexolibrary file and drag it out of the library
Restart FCP X.
If all goes well, FCP X will reconstruct the database from the contents of the library package.

TS3899 How can I block an e-mail address on iPhone 5s? My ISP is unable to help. I can block via Outlook on my laptop, but they still come through on my iPhone

How can I block an e-mail address from sending me spam on my iPhone 5s? My ISP is unable to help. I can block on my laptop via Outlook, but they still come through on my iPhone 5s. Thank you very much.

You can "Move to Junk" and it should start doing it automatically after a few times:
http://blog.mailup.com/2013/09/mail-app-in-ios-7-our-first-tests/

I cannot see my photos in iphoto library - I tried to restore with Time Machine and that doubled the number of photos (copies) but I still cannot see the images - the events are there but no thumbnails although the number of pics per event is correct...

Can someone help me see my pictures again in iphoto? 3 weeks ago while uploading a video from iphoto to Facebook, my events thumbnails all disappeared and were replaced by black squares - the event names and number of pics in each remain but when I click on the event, I only get squares where the pics should be - when I click those squares, I get a square with a triangle and an exclamation mark in middle.
Apple had emailed me about defective disks in iMacs so I took mine to the Apple Store and they replaced my HD then reinstalled from my backup via Time Machine - I still cannot see my pics! I tried to reinstall from an earlier Time Machine date - that copied everything and now my HD has double the amount of data but I still cannot see my pictures!
I would be thankful for any guidance on how to retrieve my pictures...
Thank you.

iPhoto 6 and later: Rebuilding the iPhoto library

Hello, i have updated my iphone 5 black 16 gb to ios 7 ios 7.0.2 (11a501) and my battery has become worse it gives 9 hours of usage with out doing anything, i have done everything i tried, not using my iphone as well but still no change at all!

hello, i have updated my iphone 5 black 16 gb to ios 7.0.2 (11a501) and my battery life of my iphone has become worse it gives 9 hours of usage with out doing anything, i have done everything every tip that is available online i had 3gs and 4s so i know how to save battry life,i even tried not using my iphone as well but still no change at all!. i have upadted to ios 7.0.3 then downgraded it , i thought battery may be an issue ,so i put brand new battery still no change , so what should i do ? , update to the latest version which is ios 7.0.4 or wait for the ios 7.1 , i was using iphone 4s running on ios 6.1 it gave me 3 days of battery timing , iphone 5 seemed to be very bad for me ,help ! ?
its facory unlocked btw

Try to do a reset, if it doesn't work try remove recently added apps this may solve your problem ( like google app because it has happened with me)
Take a look at apps using your location service in privacy, it can cause battery draining.

I can see my thumbnails for my events in iphoto, but when I click to open the folder, no photos show up. However, when I hover over the thumbnail, it shows the flicker of images that should be inside the folder, as well as

I can see my thumbnails for my events in iphoto, but when I click to open the folder, no photos show up. However, when I hover over the thumbnail, it shows the flicker of images
that should be inside the folder, as well as # of images in each folder. It also occasionally says the following when I try to even open iphoto: "Your photo library will not be readable by previous versions of iPhoto after the upgrade. The upgrade process for very large libraries may take an hour or more to complete." So, I am scared to hit "upgrade" for fear I will never recover any of the images as the wording in this quote seems odd. The photos are not in the trash. Did I lose them all? Do you know if/how I can retrieve them?

iPhoto 08?
Try these in order - from best option on down...
1. Do you have an up-to-date back up? If so, try copy the library6.iphoto file from the back up to the iPhoto Library (Right Click -> Show Package Contents) allowing it to overwrite the damaged file.
2. Download iPhoto Library Manager and use its rebuild function. (In Library Manager it's the FIle -> Rebuild command)
This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
3. If neither of these work then you'll need to create and populate a new library.
To create and populate a new *iPhoto 08* library:
Note this will give you a working library with the same Events and pictures as before, however, you will lose your albums, keywords, modified versions, books, calendars etc.
In the iPhoto Preferences -> Events Uncheck the box at 'Imported Items from the Finder'
Move the iPhoto Library to the desktop
Launch iPhoto. It will ask if you wish to create a new Library. Say Yes.
Go into the iPhoto Library (Right Click -> Show Package Contents) on your desktop and find the Originals folder. From the Originals folder drag the individual Event Folders to the iPhoto Window and it will recreate them in the new library.
When you're sure all is well you can delete the iPhoto Library on your desktop.
In the future, in addition to your usual back up routine, you might like to make a copy of the library6.iPhoto file whenever you have made changes to the library as protection against database corruption.

I turned off Safari pop up blocker but it still says I have a pop up blocker. How do I find pop-up blockers?

I have turned the pop-up blocker off in Safari, but I still am getting the message to turn off my pop up blocker when I try to read my e-mail in AOL. It will not let me click on any e-mail to go to a web site.

Hello,
'''Try Firefox Safe Mode''' to see if the problem goes away. Safe Mode is a troubleshooting mode, which disables most add-ons.
''(If you're not using it, switch to the Default theme.)''
* You can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
''Once you get the pop-up, just select "'Start in Safe Mode"''
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshooting extensions and themes]] article for that.
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''
Thank you.

I have disabled my pop up blocker but it still does not open pop up windows on certain sites.

I work on Windows XP, Firefox 3.6.8, webbook, 3Connect broadband dongle.
I have disabled my pop up blocker in options, but I still can not access, among others, ebay's 'add tracking number' window, the image library on www.demandstudios.com and the log in pop up on my bank's website. Is there another place I have to disable the pop up blockers? I have virus checked my web book, emptied the cache etc.
Help or tips would be much appreciated. Thank you.
petra

That suggests that the installer is getting damaged during the download.
I'd first try downloading an installer from the Apple website using a different web browser:
http://www.apple.com/itunes/download/
If you use Firefox instead of IE for the download (or vice versa), do you get a working installer?

Po event terminates well but PO still blocked.

Similar Messages

Maybe you are looking for