PO from Shedule lines

Hi
How to create PO wrt Shedule lines? What are the pre-requisites?
Regards,
Soumen

Hi Soumen,
Schedule lines will be created w.r.t Scheduling Agreeement.
Each sch. line is consider as a PO.
But we can't create PO. w.r.t sch. lines.
Regards,
Senthil.B

Similar Messages

Va31 shedule line agreement data upload from flat file

Hi abapers
I have to upload some data (va31) from flat file to my database (shedule line agreement data) I am using user exit for it...Cant get which user exit will solve the purpose and where to check it from..I tried using SDTRM001 , meeta001 and and the va45A series but its not working. I used break point on these user exits but its not stoping at break point.
Can any one help me where to find which user exit will work in this case?
Thanks in Advance
Annu

Hi Prash,
Check these posts:
Re: Increasing the length of Infoobject from 60 to 240 characters
Re: InfoObject > 60
Bye
Dinesh

Sales Order- Shedule lines

Dear Experts,
1. user is created one sales order having different sheduleline dates.
for current date they deliveried stocks to customer.
Now the user wants to know what are all the orders are due for next shedule lines
Please let us know how we can see the next shedule line dates in the sales orders which needs to deliver.
generally user they dont want enter in sales orders again and again to know. is there any report to know.
2. for next shedule line date automatically the popup will come in the screen
for ex. "in xxxx date xxxx sales order is due for delivery"
Please help me out on the above cases what needs to done in the configuration
Thanks
Raju..

Hi there,
This is possible through reports.
Ask your ABAPer to develop a report that reads a customer selection criteria from the selection scrren.
1.reads all open orders.
2. Read the schedule line data for the open items in the order.
3. Download the information into an Excel & mail it to the customers.
4. Make sure that you get these datails only when the user runs the report manually giving the selection criteria.
Discuss with the business what selection cretiria they want like customer num, from & to dates etc.
Regards,
Sivanand

Urgent- Double shedule lines confirmed

Hi Team
Today for many of the order double shedule lines are confirmed.
Like below in SO-Item-Shedule lines
Delivery date ord qty rounded qty confirmed qty
03/19/2007 50 50 50
03/19/2007 0 0 50
All materials are APO related materials and happening to specific plant only.
Any idea for why duplicate shedule lines are confirmed here any OSS notes for this?
Urgent help needed.
CioShankar1242

The SPRO path in APO/SCM would be
APO >> Global ATP >> General Settings >> Maintain Global Settings for Availability Check
In that for the Availability Check settings entry there is an option for Accept Time. The F1 help for it is as below.
ATP: Accept Schedule Lines According to Time
Confirmed schedule lines in the sales order of the connected OLTP system (SAP R/3) based on the time.
Use
The indicator defines if the confirmed schedule lines of the sales orders in the connected OLTP system (SAP R/3) should be adopted based on the day or on the time.
If the indicator is set, the sales order adopts the changes of the confirmed schedule lines or the confirmations for a time other than the desired delivery time, to the exact second. In the sales order a second schedule line is created for the same day, but created with a different time, or the times of the confirmed schedule lines can be changed.
If the indicator is not set, only one schedule line exists in the sales order if the desired delivery day can be kept, or only changes to the confirmed schedule lines are adopted that are at least one day different from the desired delivery date.
Dependencies
If confirmed schedule lines should be created based on the time, this can lead to several confirmed schedule lines for a request schedule line being created per day in the sales order, and in the item overview the impression is given that no confirmation could be made according to what was requested.
In addition, the data volume of the SAP R/3 database tables VBEP and VBBE will increase significantly, since each schedule line is represented with a data record in these tables. The same effect will also occur for the APO liveCache and for the database table /SAPAPO/SCHEDLIN.
Example
Request: Confirmation Situation:
100 pieces for 01.01.2002 12:00
50 pieces for 01.01.2002 14:00
30 pieces for 01.01.2002 16:00
20 pieces for 01.01.2002 18:00
If this indicator is NOT set, the request schedule line is confirmed and no further schedule lines are created:
100 pieces for 01.01.2002 12:00
If this indicator is set, the following (partially) confirmed schedule lines are created:
00 pieces for 01.01.2002 12:00
50 pieces for 01.01.2002 14:00
30 pieces for 01.01.2002 16:00
20 pieces for 01.01.2002 18:00
I guess this is what you are refering to.
Somnath

How to send report output to two detinations at a time from command line?

Hi ,
how to send my report to two detinations at a time from command line i.e FILE and Mail ?
i created batchfile in that i mentioned one line for file(DESTYPE=FILE) perpose and another line for mail perpose(DESTYPE=Mail).i don't want to mention to lines.
i want to send my report out put two destinations at a time insted of running two times.
thx in advance.....
raghu

hello,
did you try to use distribution for that ? check out the reports distribution facilities available in 6i.
regards,
the oracle reports team

Error while running a Discoverer Workbook with parameter from command line

I am trying to run a discoverer report from command line and export the results in xls on to my local machine. I could do it fine for a simple workbook, but if I add a parameter(madatory) to the workbook and run it from command line specifying the parameter value I wanted to run the report for, I do not get any results. Here is the command line I am using.
dis51usr.exe /connect user/password@database /apps_user /apps_responsibility "System Administrator" /eul EUL_US /open C:\Disco\Test.DIS /sheet Testsheet /parameter Period Jan-07 /export xls C:\Disco\X.xls /batch
Parameter value is entered in correct format(Jan-07).
When I removed /batch from this to see if I get any error, Discoverer Desktop opened up, logged in and gets terminated saying 'Oracle Discoverer Desktop has encountered a problem and need to close. We are sorry for the inconvenience.'
Did anybody come across this issue before?

Hello,
If you have a few minutes, Windows is also aborting for me:
the differences are, my situation is:
a) am running the command line from a .bat file
b) am NOT running with parms, want the discoverer query to come up for the user
c) am running a query from the database
i am signing in as myself BUT running a query that was created by a generic user called SREG
c) if i run the .bat file from Windows Explorer, the query opens fine
d) if i execute the .bat file from within Microsoft Access using the shell command,
the query opens and then aborts RIGHT BEFORE the parm screen would display
e) btw, if i modify the .bat file, to run a query from MY database signon, then (d) - running .bat file
from vb using SHELL command works
Do you have a ideas as to why (d) does not work? I would be very grateful for your time, tx, sandra
this is what i posted yesterday, tx: Re: Running Discoverer command line
tx, sandra

VPN Client disconnection from command line

Hi,
I want to connect to IPsec VPN on ISA500 by VPN Client (v 5.0.07.0440, the last version, I think), using command line parameters.
I can connect with the command:
"%programfiles%\Cisco Systems\VPN Client\ipsecdialer.exe" -c -user myUser -pwd myPassword "MyConnectionEntry"
but i don't know the command to disconnect from command lines.
If I do
"%programfiles%\Cisco Systems\VPN Client\ipsecdialer.exe" -?
I obtain the list of parameters
vpngui [-c | -sc [sd] [-user <username>] [-pwd <password> ! -eraseuserpwd]] <connection entry>
but I don't unterstand what I have to do... I try every combination using -sd parameter (I think means for silent disconnect), but in every case I can only to show VPN interface without disconnect anything...
Can anyone help me?
Thanks

Prasath,
This appears to be a data flow issue. You need to look in the dataflow log file. Your information indicates the project name is SAMPLES.xml, and the data flow ID is D20091213_014350765. Look at the data flow log file in
C:\dqxi\11_7\repository\configuration_rules\runtme_metadata\project_SAMPLES\D20091213_014350765
Alternatively, you can temporarily replace the transactional reader and writter transforms with their corresonding batch transforms, and run the job from the Project Architect. Any errors will be displayed in the Running window.
Paul

Copy Trading Partner to Asset line items from Vendor line items in F-90

Dear Friends,
I want to copy trading partner field from Vendor line item to other line items like Asset and Tax in T.code - F-90
Client want to use Transaction type - 100
Is it feasible?
Thanks in advance

try:
1) substitution - tcode OBBH
or
2) open FI - menu FIBF tcode BF44
- event 1120 or 1130
A.

How to clean project from comman line ?

How to clean project from comman line ?
I would like to invoke the same functionality as in Flex
Builder Project -> clean... -> clean all projects...
but from command line is it possible ?

You can:
1) Perform a project clean up (p.153 of the user manual) - it removes any unused recordings, samples and other files
2) Consolidate project (p. 154 of manual) - this copies all the used audio material into the project folder and also deletes any empty folders within project folder, making it easier to navigate
3) Save project as a copy - this creates another project folder, but without all the backups and other additional files

Transfer Upgrade from one line to another on the same plan.

Is it possible to transfer an upgrade from one line to a second line, and then have the phone that was used on the second line, be switched to the first line? If so, how would I go about doing this online?

Yes. The account owner should be able to log in to MyVerizon and click on "Transfer this upgrade" when they view all of the upgrades available for their account. If they don't have that option, another way is to just order the phone normally, then activate the new phone on the line it was ordered for briefly to accept the Terms & Conditions of the new contract. Then you can activate the old phone from that line again, which will free the new phone up to be activated on the second line.
If you're getting a 4G phone, you'll want to call in to Customer Service before you start activating though, because the 4G SIM cards can complicate the activation process.

I can not uninstall Office 2013 from command line

Hi, I have been stuck for a while trying to uninstall Office 2013 via command line. Installation file was downloaded from Volume Licensing Service Center, Uninstall.xml file for silent uninstallation looks like this:
<Configuration Product=”ProPlus”>
<Display Level=”basic” CompletionNotice=”yes” SuppressModal=”yes” AcceptEula=”yes” />
</Configuration>
From command line the following will not work:
setup /uninstall ProPlus /config .\ProPlus.ww\Uninstall.xml
Error: Setup can not find or validate an installation file. Please try reinstalling Office . . .
setup /uninstall ProPlus gives me GUI to continue process - it seems /config .\ProPlus.ww\Uninstall.xml part does not work as it should be
This is very important to me since I used above command line in SCCM 2012 R2 to allow user to uninstall Office 2013 by itself via Software Center. When this failed I tried locally but the error was the same. This should have been trivial task - silent uninstallation
using .xml file. It is not a rocket science. I am very angry because losing time for something like this is unacceptable for system engineers working with SCCM 2012 R2.

Hi,
This error might occurs due to lots of reasons. Where is the installation file stored? If it's stored on a network share, please copy it to your local disk, and then manually run the command again. This way, we'll see if the installation file is the
problem.
If issue persists in this case, then this generally means that something wrong with the installation file. Please try to redownload it and then try again.
Please also make sure that you're executing the command with elevated privileges (run as administrator).
Regards,
Ethan Hua
Forum Support
Come back and mark the replies as answers if they help and unmark them if they provide no help.
If you have any feedback on our support, please click
here

How to delete more than one workbook from command line

Hi, I'd like to delete more than one workbook from command line:
The following syntax, it doesn't work....but I followed the manual instructions:
dis51adm.exe /connect eul/eul@uatdb /delete /workbook "ALE_TEST_1, ALE_TEST_2" /eul eul /log D:\Ale\delete.log
where:
eul/eul@uatdb: is the db’s schema/user where the EUL is installed;
/delete "ALE_TEST_1, ALE_TEST_2": is the command to delete the workbooks, specified inside the “” (with the relative path)
/log D:\Ale\delete.log: is the command to write a log’s file named “delete.log” to track the action
The log file says:
22/4/2008 4:00:26 μμ
dis51adm.exe /connect /delete /workbook ALE_TEST_1, ALE_TEST_2 /eul eul /log D:\Ale\delete.log
Document ALE_TEST_1, ALE_TEST_2 not found in EUL.
Internal EUL Error: ObjectNotFound - Can't find EUL element
There are 0 eul elements to be deleted.
Completed deleting eul elements.
22/4/2008 4:00:29 μμ
Anyone can tell me how is the right syntax ?
Thanks in advance
Alex

Hi Rod
I was coming to that conclusion myself but wanted to wait until the other avenues had been exhausted first - aka making sure of the workbook names.
I checked through all of the command line documentation and read nothing which clearly indicated that only one workbook could be processed at a time, other than the fact that the syntax says workbook and not workbooks, which could be a big clue.
I think you are right though in that it has to be one at a time, which would be a pain.
Best wishes
Michael

I did a COPY of some text from a web page, and then did a PASTE into notepad.exe (Windows). The text from each line was duplicated -- on the line! Instead of "Fred", it became "Fred Fred".

I just recently installed Firefox for the first time. It seems nice and quick. The version is reported as: "10.0.1".
I wanted to save some text from a web page, so navigated to that page, selected the text, and pressed the Control-C combination to COPY the selected text to the buffer. For example, the text I selected looked something like this:
Harry
Ron
Hermione
Hagrid
Albus
NOTE: Each line of text has a small icon to the left of the text.
It is not reasonable to COPY and PASTE each line individually, as there can be hundreds of lines of data. I recall, however, that
doing a COPY and PASTE on this data into Microsoft's Excel will produce cells which have the icons included in the cell, but unfortunately one cannot can't get rid of them! At least I've never found a way to remove them, but that's another issue. :)
Once I'd done the COPY operation I switched to a Notepad window and did a PASTE operation. To my surprise, the text from each line was duplicated. It looked like this:
Harry Harry
Ron Ron
Hermione Hermione
Hagrid Hagrid
Albus Albus
Thinking that there might be something unusual about the web page I looked at the source, but it appeared "normal" -- that is, as expected.
Note: I have done this operation several times before, and have never seen this occur before.
Note: In the actual data some of the lines have quoted text in them. Curiously there is weird behavior on these lines. In some cases the entire line is shown only once. (These occur at the top of the line, and the quoted text is at the beginning of the name.)
When quoted text appears "later" in the name, in some cases the quoted text is duplicated, and in other cases the quoted text is missing altogether! I have also noticed an error with the quoted text, and so will be reporting that to the web site which generates the HTML.
Note that each line of "text" is "anchor text", so if I click on a name the browser navigates to a page for that name.
I believe that the problem is that the COPY operating in Firefox is not simply copying the visible text, but also the ALT=
Below is a sample of what the source HTML looks like:
<a class="lnk" target="_blank" href="http://details.aspx?id=Harry">
<img width="16" height="16" alt="Harry" class="tb_icon" src="http://.../Harry.gif"/>
<span>Harry</span></a>
<br/>
(Because of the true length of the lines in the source HTML, I have stripped out the actual URL of the site.)
To make sure I wasn't imaging this difference I repeated the process within Internet Explorer. In that browser I did not get duplicated data.

Try:
*Extended Copy Menu (fix version): https://addons.mozilla.org/firefox/addon/extended-copy-menu-fix-vers/

How to run a 10g report from command line ?

Good Afternoon,
Please advise if there is a way to run a 10g report from command line.
We use 6i right now and our job scheduler runs reports using "D:\ORADEV6I\BIN\RWRUN60.EXE ..." executable in batch mode on a separate server. We plan to migrate to 10g Database, Forms, Reports. Is there a way to keep this functionality and create a "command" to address an report server and run a report?
Thank you,
Dmitri

Steps to take.
(1.) In command prompt type RWSERVER SERVER=repserver1 to star the rep server.
(2.) If you get "Javaw.exe The procedure entry point psoasyn could not be located in the dynamic link library orapls10.dll." error do one of the following
        (a.) Type the full name for the server. D:\OracleDevR2\bin\rwserver SERVER=repserver1
               or, if it does not work
        (b.) Add D:\OracleDevR2\bin to the system env. variable PATH
(3.) Start OC4j
(4.) Now you can access the jobs using URL like:
    http://192.161.11.143:8890/reports/rwservlet/showjobs?server=repserver1
      where 192.161.11.143 is your machine's IP address.

To run a report from command line, when using jdbc-odbc bridge

Hi,
How to run a report from command line, when using jdbc-odbc bridge?
Usually with tns, we do by "rwrun module=<> userid=<user>/<passwd>@tns".
with odbc, we do by "rwrun module=<> userid=<user>/<passwd>@odbc:DSN"
Please specify, what is command line arguments for jdbc-odbc bridge driver?
Environment : Oracle 9i Report Builder on WinNT
Database : Sybase
Regards,
Ramanan

Hello Ramanan,
Report Builder : connect JDBC Query in Report Builder is to through Connection Dialog in JDBC Query Editor. User can use a Sign on parameter (can use, default : P_JDBCPDS or can create new) to connect to JDBC Data Source. Connection once made will be mentioned and will be reused through out Reports Builder.
JDBC PDS allows user to connect one or more same or different kind of databases.
While running report through runtime or Server, user can pass the sign on parameter(connection string) value, like any other user parameter.
Syntax for connection string : <username>/<password>@databaseURL . The syntax of database part of connection string depend on the type of JDBC Driver used to connect to Data Source while designing the JDBC Query. databaseURL refer to the location of the database and its format depend on the JDBCPDS river selected in design time while creating the JDBC Query.
rwrun eg :
rwrun report=jdbc_odbc.rdf destype=file desname=output.html desformat=html P_JDBCPDS=scott/tiger@database
Server eg :
http://server.com:8888/servlet/RWServlet?server=MyReportServer+report=jdbc_odbc.rdf+destype=cache+desformat=html+P_JDBCPDS=scott/tiger@database
http :
Please see ORACLE_HOME/reports/conf/jdbcpds.conf for more information.
With Regards
Reports Team

PO from Shedule lines

Similar Messages

Maybe you are looking for