PO going to Held :Partner Overview all data missing

Hi,
SRM 5.0, ECS
After approving shopping carts, PO getes creating but going to held status.
Dont know what happened.
when i am checking held PO getting below error messages
4 Messages
  Data inconsistency during tax calculation    
  Output: No details for medium FAX im vendor master record    
  Select a location to which a plant has been assigned  (Item 1)  Further Information 
  Please clear the price or set the "Invoice expected" indicator  (Item 1)
any idea..
Regards,
Jai

I need to know..after approving shopping cart how the shopping cart data transferred and updated in to PO
so that i can put a breakpoint and debugg
thx
Jai
Edited by: M Jairaj on Sep 11, 2009 8:20 PM

Similar Messages

  • All Data Missing After App Store Update to MPG Program....

    I've been using a program from the App Store Called MPG. It tracks your automobile fuel usage, cost, miles per gallon etc. I"ve been using the program for three weeks and had a lot of data stored.
    This weekend I was notified of a program update... the update completely deleted all of my data. I found info on the forum about this issue ( the app developers are not writing the applications in a way that preserves previous user data ) so when the update is done the program is essentially reinstalled as a new app.
    I have iTunes backing up my iPod Touch during each sync but I see no way of doing a restore. How do you restore? I synch'ed this morning, so is the backup that was just created which does not contain my missing data overwrite the prior backup which may have contained my data?
    Thanks !
    Chuck :- )

    I was mistaken... the app did not delete my previous data...

  • Me and my partner are currently using the same apple id and have no space left on our devices. We are currently waiting on the iphone 6 plus to arrive and don't know how to transfer all data to the new phones.

    Me and my partner are currently using the same apple id and have no space left on our devices. We are currently waiting on the iphone 6 plus to arrive and don't know how to transfer all data to the new phones.?

    I don't know if I'm asking this all in a way that can be understood? Thanks ED3K, however that part I do understand (in the link you provided!)
    What I need to know is "how" I can separate or rather create another Apple ID for my son-who is currently using "my Apple ID?" If there is a way to let him keep "all" his info on his phone (eg-contacts, music, app's, etc.) without doing a "reset?') Somehow I need to go into his phone's setting-create a new Apple ID and possibly a new password so he can still use our combined iCloud & Itunes account?
    Also then letting me take back my Apple ID & password, but again allowing us (my son and I) to use the same iCloud & Itunes account? Does that make more sense??? I'm sincerely trying to get this cleared up once and for all----just need guidance from someone who has a true understanding of the whole Apple iCloud/Itunes system!
    Thanks again for "anyone" that can help me!!!

  • HT201441 I have bought an used Iphone from a shop. then i put my account id in it. then it goes perfectly. After awhile i have done a reset all data and sitting then i could not get the Iphone started because it have been asked to put another email starti

    I have bought an used Iphone from a shop. then i put my account id in it. then it goes perfectly. After awhile i have done a reset all data and sitting then i could not get the Iphone started because it have been asked to put another email starting with u
    For contact [email protected]

    Sounds like the Activation Lock is still set to the previous owner. If you are unable to get that Apple ID and password that iPhone is totally useless to you.
    Take it back to the shop and demand your money back because they sold it to under false pretenses.
    Allan

  • Just got new macbook pro (13inch) and restored all data from old mac via time machine. Now whenAudio drop out for 3-4 secs every 10 - 15 secs!! What is going on and what can I do?

    Just got brand new macbook pro (13inch) and restored all data from old mac via time machine. Now when I p/back a track in logic I get audio drop out for 3-4 secs every 10 - 15 secs!! What is going on and what can I do? Its the same version of logic and all other functions seem fine!

    First of all, why did you say yes to Nero Back up before researching what it does with files already on the HDD? When I install Nero, the Back Up is the first thing I disable, it is a nagging pain, there are much better backup programs available. There are several file recovery programs out there to recover deleted files, that is, if that is what happened. Also, if you haven't overwritten the files, so you should be able to find them.

  • 'Preferred Vendor' and 'Vendor' in Purchase Order Partner Overview screen

    Hello All,
    Please can you provide me with some assistance to the following issue we have on our SRM 5.0 system......here goes.....
    In 'Define Sourcing for Product Categories config' , we have set the value to 'Sourcing is never carried out'.  Now, when we manually assign a Supplier to the Cart and have it automatically converted to a Purchase Order, the Purchase Order is created but only in Held Status as only the 'Preferred Vendor' in the PO Partner Overview screen is populated with the other 'Vendor' field remaining blank and requiring manual intervention by our users
    Please can someone explain how we are able make the system to always have the 'Vendor' field populated, therefore not needing any manual intervention.
    Your help would be appreciated,
    Thanks
    Steve Walsh Jnr

    Hi
    Implement the following method , in which you will force prefer vendor
    to fixed vendor for all applicable sc.
    IF_EX_BBP_DOC_CHANGE_BADI~BBP_SC_change.
    You will have to work with partner function 00000039 which is the
    prefered vendor to move into the partner function 00000019.
    In the BBP_DOC_CHANGE_BADI we provide the business partner data
    through the IT_PARTNER interface table. the prefered vendor or desired
    vendor has partner type 39, the regular supplier will have partner
    type 19. a switch from 39 to 19 should create a po instead of
    incomplete po.
    BR
    Muthu

  • Security concern/ application concerns and procedures for zeroing all data

    Hi,
    I've looked through the posts and can't find the answers to my questions so here goes:
    I've had a MacBook Pro for about a year, and I may have to return it to my employer. In an effort to prepare the machine and make sure my information can't be accessed once it is returned I have read that the proper thing to do is zero all data (I have read the MAC how-to page on the process).
    I was told that zeroing all data will remove my files and access to trashed items after I give it back to my employer, but I have a few concerns:
    1. I have an external hard drive with more than enough room to transfer my files, but what exactly does everyone mean by "all my files"? Just my personal files in the various applications like iPhoto, iTunes, and even My Documents, or are there others as well?
    2. Although I have the DVD/CD that came with the machine, there were additional software applications installed by the administrator at my place of work (Office - Power Point etc). Do these things get removed when I zero data or will they still be there?
    3. Lastly, is it true that you should zero up to three times to make sure your data is inaccessible? I know it will take about 24 hours to do approx. 20 gb's....
    Thanks so much in advance,
    Goldilox

    I have an external hard drive with more than enough room to transfer my files, but what exactly does everyone mean by "all my files"?
    Well what do you mean by all your files? Usually all your things will be in your home folder, so as long as you have enough space to contain that, you'd be okay.
    Although I have the DVD/CD that came with the machine, there were additional software applications installed by the administrator at my place of work (Office - Power Point etc). Do these things get removed when I zero data or will they still be there?
    Zeroing data happens at the drive device level, so everything on that volume will be gone. It's akin to formatting.
    Lastly, is it true that you should zero up to three times to make sure your data is inaccessible? I know it will take about 24 hours to do approx. 20 gb's....
    It depends who you're worried the attacker is. For most people, zeroing a few times will be enough to prevent them ever retrieving the data. Very expensive specialised data recovery equipment can still recover data from a zeroed drive, though... so if you're afraid of the police, or the FBI, or the NSA, then you're better off physically shredding the hard drive.

  • Can I config timesten not to hold all data in memory?

    In our production environment we use a server with 32GB memory to run Timesten, but developer machine only have 2GB memory. Now we are going to fix some issue that require duplicate the production data to Developer machine, can we have config timesten not to hold all data in memory so that it is possible to duplicate the production data to Developer machine? Is timesten support something like cache table as hsql?
    http://hsqldb.sourceforge.net/web/hsqlFAQ.html#BIGRESULTS

    TimesTen is an in-memory database. All the data that is managed directly by TimesTen must be 'in memory' and the machine hosting the datastore must have enough physical memory or system performance will be severely degraded.
    The only way to have a combined in-memory and on-disk solution is to introduce a backend Oracle database (10g or 11g) and use TimesTen cache connect. Of course, this then becomes a very different configuration and depending on what 'issue' it is that you need to investigate and fix the change to a Cache Connect configuration may hinder that investigation.
    Chris

  • I was trying to update my ipod touch and an error occured. Now it says I'm suppose to connect it to itunes and restore it to it's original settings. That's going to make me lose all my pictures and stuff right?

    Okay, while I was updating my ipod an unknown error occured. Now It's telling me I need to connect it to itunes, even though it's plugged in already. And when It does connect it shows up as a generic "ipod".  It doesn't even show my ipod anymore. And it wants me to restore it. It said something around the lines of "restore ipod so it can connect to itunes." Isn't that going to delete all my pictures and stuff? I don't think it saved the reboot from when it was updating!I just want all my settings and stuff back! I don't want to lose all my stuff especially my 2,000 pictures on there! Ugh! Help!

    Errors when updating leads to corrupt system files and this may be your problem. If you're using windows, connect your device to PC and run any third party app like Syncios. If it detects, you maybe in luck and try to back-up your data if possible. I hope that it won't and if doesn't, there is no other way to recover files. You should be restoring with iTunes and all data will be erased, or else your device may become unusable.

  • Had many issues with phone, decided to erase all data and now it won't finish

    Okay here's the rundown of my problem on my iPhone 5 32GB. I can't check currently (you'll understand why later) but I believe it was on iOS 7.1.1 as I know it wasn't the absolute most recent version. First off, my lock button is sometimes unresponsive, a hardware issue and I haven't gotten around to getting that fixed yet. Anyways.
    Today I wanted to open up my twitter app. The instant it opens, everything freezes. I mean everything: screen, lock button, home button, everything. The screen usually shuts off after 90s if I don't do anything, so the screen went black after this time as everything I did didn't register. Now with the screen being black, still no response from most things. The only thing I can do is activate Siri, though the screen still doesn't turn on, just the sound. She couldn't usually hear me, and if she did it would take her about a minute or so to respond. I can still connect to iTunes (windows 8) though so I did that, but I stopped the initial sync. I tried doing the hold both buttons for 10s thing but that didn't work (might be because the lock button is iffy) so I couldn't start recovery mode.
    At this point, I decide the only thing I could do (because no where on Google anyone had a similar problem) is to restore the phone, either to factory or to a backup. When I tried these options in iTunes, it told me that it could not do this while Find my iPhone is active, and to go to settings on my phone to turn it off. I can't open settings with the screen black. I tried going to icloud.com in order to see if I could turn it off from there. The site could find my phone just fine, could make the sound just fine. I could however not remove the device from iCloud unless the phone was turned off (which I again can't do with a black screen).
    At this point, I went to the directory with the backup on my computer and copied it to another location. Then in iTunes I did a sync to create a new backup. Now the only thing that was available for me to do was on the web site to erase all data from the phone as it did not require Find my iPhone to be turned off. Feeling out of options, I went through with it and clicked erase. For some reason, this is the time that the screen decides to turn on. The phone showed the apple logo and a progress bar. The bar progressed quickly at first but then slowed as it neared the end. At this current point, it's been at what appears to be 100% for around an hour with nothing happening. The buttons do nothing, my computer can't see the device so iTunes won't do anything.
    Is there anything else I could try to do or should I just wait it out. My city does have an apple store which I could go to tomorrow but if I could get my phone running tonight that would be great. Also, if I can't do anything and it doesn't budge, if I take it to the store would it cost a lot to fix or (if necessary) replace? It was a birthday gift two years ago, bought without a plan, and I don't think it's still under warranty.

    Hi..thanks for your advice!
    Ok, I am student so buying a new phone is not possible ;( This experience has turned me off Apple anyway! All I did was click yes to their iTunes upgrade prompt asking me if I want to update....and now I don't have a phone and can't access all my backup etc on my iTunes because it seems the only way to get to it is with another iPhone!?
    I can't believe that through the Apple recycling program I could possibly get $50 for this phone because the hardware is perfect but there is no support for this issue...feels like Apple is just trying to force everyone with hacked phone to buy new ones!

  • Zero Out All Data and GUID

    I'm just formatting a second hard drive for backup purposes. I've decided I want to zero out all data to ensure that the drive maps out bad blocks, and then I'm going to create a GUID partition just in case I decide to make it a boot drive in future.
    Three questions:
    Why doesn't Disk Utility give you the option of Zero Out All Data and GUID partition as a 'one stop shop'?
    Is there any disadvantage to having a GUID partition on a backup drive?
    Are any remapped bad blocks found during the zeroing process retained after the GUID partition erase?

    Zeroing and GUID don't always go together. AIUI, GUID is only compulsory for a boot partition for Intel Macs; and it is recommended for volumes used by Time Machine. Otherwise, Apple Partition Map will usually be required since it can be read by both Intel and PowerPC Macs.
    The disadvantage to having a GUID partition is that it won't be readable by PowerPC Macs.
    Simon

  • My iphone 3gs has recently broken and have put it in for repair but i may loose all data. which would be fine as i had backed it up on my itunes. However my computer has now broke. is there anyway of getting my restore back on another computer at all?

    my iphone 3gs has broken [was in a sort of reboot loop] so that is being fixed and i get it back on Thursday. I may loose all data from it being fixed and that would of been fine as i have a recent back up on my i-tunes. However yesterday my laptop decided to turn itself off and not work anymore so thats going to be going to get fixed soon as well but is there anyway of getting my back up i had on my itunes on a different computer?
    thank you for your help!

    Follow this very helpful user tip by wjosten:
    Syncing to a "New" Computer or replacing a "crashed" Hard Drive

  • N900 - How to update software and Reset ALL data.

    If you have tried to reset an N900 from the settings menu on the device, you would have noticed it would have left all your data intact.
    Sometimes you want to start from scratch and delete all data in one go. 
    Here is how you do it.
    Its quite extensive, but comprehensive.
    From a windows PC
    You first need to download three pieces of software.
    The first software you need is called "Maemo Flasher", and this is the program that needs to be installed on your PC and can be found here:
    http://tablets-dev.nokia.com/maemo-dev-env-downloads.php
    Download the latest version of Maemo Flasher (which is currently 3.5 at time of posting this), and make sure you download the .exe file (maemo_flasher-3.5_2.5.2.2.exe).
    Install that file.
    Next you need the software for the N900 itself.
    That can be found here:
    http://tablets-dev.nokia.com/nokia_N900.php
    This page will ask you to enter your IMEI, with very clear instructions on where to find it.
    Follow the on screen prompts until you reach the download section.
    There are two pieces of software you need to download from there.
    eMMC content - This is the package to erase all data held on your 32GB storage.
    The Operating System.
    OS 2009
    PR 1.1.1
    PR 1.2
    There are, unfortunately, 3 different names for the OS.
    Latest version is "PR 1.2 version 10.2010.19-1".
    Download the latest eMMC package available, It's version 10.2010.13-2.
    The OS is a little more difficult to figure out which one you need.
    The notes alongside the software lets you find the right package easier.
    I found the best way to check is to do the following: (On the N900)
    Menu
    Settings
    About Product
    This will show you this image(or similar)
    Note the Version number on your N900's screen.
    Download the OS package that matches the Version on your device. As shown in the image above, using the red text as an example.
    For people that purchased the N900 in the UK, the OS package will probably be the same as the red text. But make sure you check.
    Software downloads complete.
    Place these two software packages in the following location on your PC.
    c:\program files\maemo\flasher-3.5
    You should now have two .bin files in the directory above.
    Next steps.
    Updating the N900 OS
    Your battery needs to be 100% full to prevent any crashes which could leave your phone dead.
    Turn your N900 off.
    Press and hold the U key on the keypad.
    Insert the USB cable (a USB symbol should appear on the top right of your N900 screen, and also the Nokia logo in the centre).
    You can now let go of the U key.
    On your PC: Navigate to the Start Menu and select Run.
    In the Run box, type: cmd. Then OK
    In the command window, type: cd\program files\maemo\flasher-3.5
    Type: flasher-3.5 -F RX-51_2009SE_1.2009.42-11.203.2_PR_F5_203_ARM.bin -f
    (the file name above may be different to yours, you will need to replace the filename with the filename of the software you downloaded).
    This image below shows the completed update of the OS, in the command prompt on your PC. This would have now removed any Apps you may have installed on the device, and reset the homescreens to how they were when you turned it on for the first time.
    Your personal data, such as Contacts, Images, SMS will still be on the device.
    So if you want to remove these aswell, follow the next steps.
    Resetting the Mass Memory
    Your battery needs to be 100% full to prevent any crashes which could leave your phone dead.
    Turn your N900 off.
    Press and hold the U key on the keypad.
    Insert the USB cable (a USB symbol should appear on the top right of your N900 screen, and also the Nokia logo in the centre).
    You can now let go of the U key.
    (If you have left the command prompt open on your PC from updating the OS in the previous section, ignore steps 5,6,7)
    On your PC: Navigate to the Start Menu and select Run.
    In the Run box, type: cmd. Then OK
    In the command window, type: cd\program files\maemo\flasher-3.5
     Type: flasher-3.5 -F RX-51_2009SE_1.2009.41-1.VANILLA_PR_EMMC_MR0_ARM.bin -f -R
    (the file name above may be different to yours, you will need to replace the filename with the filename of the software you downloaded).
    This image below shows the completed reset of the eMMC (32GB HDD), in the command prompt on your PC.
    This would have now removed any data you had stored there. Including Music, Photos, Contacts, SMS..
    The complete reset of your N900 is now complete.
    I hoped this has helped.
    My posts are my opinion and in no way the direct views of Nokia.
    If my posts are helpful, please give me some KUDOS using the green star on the left.

    Hmm, it's odd, because the wiki.maemo and another thread here say it works fine on 7. I have put flasher into xp compatibility, but the cmd box has no way to change it - at least, if it does it's through a back route that i'm unaware of.
    Attached the screen i see
    Edit: what "run" dialog box? is that the cmd box?
    Attachments:
    cmd.jpg ‏55 KB

  • HT3529 I have lost all data on my iphone and the back-up is too old. How can I restore iMessage chats on my iPhone 4? I have all the chats on my Mac, but there seems to be no sync function from Mac to iphone. Please advice.

    Hi,
    I have lost all data on my iphone by mistake. I needed to restore the phone and I didnt realize my back-up was 1yr old, and now the phone is restored and I've got a year old contact list and iMessage chat history. Luckily my iMessage on the Mac is still valid and has all the chat history. My question is how can I restore iMessage chats on my iPhone 4 from my Mac? I have all the chat history on my Mac, but there seems to be no sync function from Mac to iphone. Please advice.

    If things seem to be going haywire with your phone, it seems that it MAY be a software issue.
    Now, that being said, that does not necessarily mean that it is a virus. Software issues do happen sometimes. It is probably just coincidence.
    What you need to do is restore the device using iTunes. This will fix any software issues. After you have done this, you can restore from an iCloud backup.
    iCloud does not back up the actual software, so no, the "virus" would not have gotten into the backups.
    The link below provides steps on restoring your device using iTunes as well as how to restore from an iCloud backup.
    http://support.apple.com/kb/ht1766
    Don't worry! Everything should be back to normal if you follow these steps.

  • Add business partner to target group - some data missing

    Hello,
    I created a target group. This target group includes data of person and the associated data of organization (for example: city, street, ...). Now I want add some other person. I have two opportunities when I have open the target group:
    1. In the table of the target group
    In the column "Business Partner ID" I can open the input help and search the person which I want add zu the target group
    2. In the view of the target group
    On the top there is a button "Import Business Parterns", there I can upload txt files with the bp-no. from the person.
    It works only the first possibility. There are all data of person and organization included.
    At the second possibility there are the data of person included, but it lacks the data of organization and I don't know why.
    Does anybody know, what's the problem? Is it standard or is it a bug?
    Thank you in advance.
    Best regards, Jasmin

    For information:
    When you want add business partner by file upload to the target group, in the SAP standard the target group can handle only one ID, either the account ID or th contact ID. So when I add some contact IDs by file upload to the target group then I miss the data of the account. So, I have to build up the same target group a second time.

Maybe you are looking for