PO,GR and IR number report
Dear All,
Is there any std report which gives GR and IR number for the respective PO's.
Regards
Hi
Go to T-CODE : ME2M here under scope of List select "ALLES " & execute here you will get report with GR & IR Number against PO,
Regards
Edited by: Ranganath Mysore on May 4, 2010 1:14 PM
Similar Messages
-
Personnel Areas and Personnel Number reporting
Dear experts,
Iu2019m new in HR, and Iu2019ve an issue concerning the information of personnel areas and subareas associated to each person. That is, for each person /worker I need to know which his personnel area. Is there any table or report that gives me that information?
Points will be rewarded.
Many thanks.
Best regards,
Andreia NascimentoHi,
Go to PQAH T Code,select key field PERNR with right click as output with name & text,in Org assignment select PA & PSA and execute you may get a report with emp no name PA & PSA.
Same way all queries can be formed this way for you.
Salil -
One report to check WBS and Asset number
Hi All,
Please advice. Is there any report to check WBS and asset number belong to ?
Many thanks in advance.
NiesPlease let me know your exact requirement.
But KOSRLIST_PR will show (if you have valid entries) the settlement receiver something like below with WBS element information and settlement details:
WBS ISC/00002-1-02 RECEIVER WBS2-COMP 1000
FXA 1000/700000132/0 RECEIVER WBS2-COMP 1000 100.00 AUC Act
Regards
Sreenivas -
Displaying the Row and Column number in the report
I am trying to show row and column number in the report (not just web preview). I am using Hyperion Reports Version 7.2.5.168
use a formula column/row. use RANK function in that. (e.g. Rank([A], asc) will sort the rows based on column A values in ascending order)
you can use this rank in your heading.
But frankly this is not so easy. You have to do it in a very intelligent way, so that rank gives you column number/row number any how.
Have a try and let see if you find a appropriate solution.
Regards,
Rahul -
Standard Report to get both PR and PO number
Can anybody suggest a standard report which gives both PR and PO number. I am working with 4.6 release.
dear
choose ME5A and select closed requisition and run the report you will get it after set the dynamic selection,
this is the only way to get the PR and PO no. in a list else you can get individual as per the laxman.
regds
dev...! -
How can we get Delivery Slip and Invoice number for the SO in custom Report
Hello,
I am developing a new report for the Sales Order.For this , I have to diplay the Deliver slip and Invoice number.
Could you please explain the logic for this.
Thanks and Regards
NTRHi,
Pass sales order number to table VBFA-VBELV. You will get the complete doc flow. VBTYP_N differentiate whether it is delivery,GI or invoice etc. (Check for domain values for more info on this)
Thanks,
Vinod. -
Need a parked/blocked report that contains both the FI and MM number for ea
Hi Guys,
Business need a report which contains the translation of 'MM' numbers (typically beginning with '51') assigned for parked PO invoices vs. the 'FI' document number that comes out in the parked report.
Ideally, business need a parked/blocked report that contains both the FI and MM number for each record.
Can someone help me pull this report from MM
Thanks and Regards,
HabeebHello Habeeb,
Check out the report MR43 which gives information about Parked invoice. Also you can have a look on MIR6 with check box Parked Innvoice.
The main table for parking invoice is VBKPF and other relevent tables are as follow:
VBKPF Document Header for Document Parking
VBSEC Document Parking One-Time Data Document Segment
VBSEGA Document Segment for Assets Document Parking
VBSEGD Document Segment for Customer Document Parking
VBSEGK Document Segment for Vendor Document Parking
VBSEGS Document Segment for G/L Accounts Document Parking
VBSET Document Segment for Taxes Document Parking
Hope this helps.
Regards
Arif Mansuri -
160 GB stock drive...can anyone report make and model number?
Although there may be more than one supplier to Apple of the 160 GB drive which is offered as a downgrade option, can anyone report back the make and model number of what they have received?
Thank you,
JohnAccording to this posting
http://episteme.arstechnica.com/eve/forums/a/tpc/f/174096756/m/408003050831?r=73 6007850831#736007850831
the person indicates that they received a Seagate 7200.9 single platter. -
Vendor name and Vedor number in FAGLL03
Hi All,
My Client is running report for GR/IR, T-code FAGLL03, they want to see Vendor name and Vendor number columns in the report. I searched forums and got the answer for Vendor number but not clear
My questions are
1. I added field LIFNR in BSEG table in the SPRO and am able to see the vendor colum. If I transport to Test system, will I be able to see the vendor column? (in forums some one mentioned that they are not able to see the vendor column when they transport to Test system) they have been asked to run this program BALVBUFDEL, So I am concerned about this issue and want to know exactly what are the things that need to be done, what programs have to be run before transporting to Test system?
Also we are using ECC 6.0 and the highest support package present in the system is SAPKGPAD15. So I dont think I need to install the OSS note 1034354, I checked the OSS note and the highest APPL level is 604? but just making sure about this Patch level and OSS note.
2. Second, how to get the Vendor name cloumn in the report?
Could someone give me solution? your help will be really appreciated.
Thanks,
Harter
Edited by: Harter21 on Nov 8, 2009 2:57 AM
Edited by: Harter21 on Nov 8, 2009 2:58 AMHi Sanjay,
Thanks for the reply. I understood that we get Vendor number from the Function module ITEM_STRUC_EXTENSION and when you run that FM it updates the vendor number in the Structure FAGLPOSYEXT. I want to have Vendor name side to Vendor number field. Can I get vendor name also from the same FM?
I have tried in BSIS table and other OSS notes that are mentioned in that forum link but none of the OSS notes mentioned about the Vendor name and the vendor name is coming from LFA1 table and that has no connection with FAGLL03 report as far as I understand (correct me if I am wrong).
If you have any idea please throw some light.
Thank you very much,
Harter. -
Hierarchy Analysis Authorization in BW and BOBJ Webi Report
Hello,
We have a scenario wherein we have implemented Analysis Authorizations (Hierarchy) on Organizational Unit info object (0ORGUNIT) and need to report on BOBJ WEBI. Our scenario is as following
ORGUNIT - L0 (Overall Enterprise Level)
- L1 (Enterprise - Continent Wise Split)
- L2 (Enterprise u2013 Country Wise Split)
- L3(Enterprise u2013 City Wise Split)
E.G-
LO (Company ABC) MANAGER 0 will have access to the entire organization
-L1 (ASIA) MANAGER1 will have access to ASIAN Subcontinent
-L2 (India) MANAGER 2 will have Access to country India
-L3 (New Delhi) MANAGER 2.1 will have access to city Delhi
-L3 (Mumbai) MANAGER 2.2 will have access to city Mumbai
-L2 (Malaysia) MANAGER 3 will have access to Country Malaysia
-L3 (Kuala Lampur)
-L3 (pahang)
- L1 (Europe)
u2026..
The requirement is that the CEO of the company should be able to see the entire set of data ( L0-L4).We have continent managers who can see that data specific to their continent, similarly at L3 Level the city manageru2019s should see the data only for their specific city.
In BI we have used analysis authorization based on hierarchies. We have created an authorization object say ZAUTH1 and have assigned the hierarchy L0 from RSECADMIN. Now, in Webi when we create a report a sample row comes as :
L0 Org Unit L1 Org Unit L2 Org Unit L3 Org Unit SALES Key Figure
Company ABC Asia India Mumbai 1000
Now, we have MANAGER 2.2 who has only access to the data specific to his city (Mumbai). There is an Analysis Authorization object created for him ZAUTH2, by ONLY assigning the org unit hierarchy L3 (for Mumbai). When we run the bex report with the user MANAGER 2.2 u2013 it correctly displays the result and the user is only able to see the data for L3 Org Unit (Mumbai). However when you bring this data to Webi u2013 the report comes in the below format:
L0 Org Unit L1 Org Unit L2 Org Unit L3 Org Unit SALES Key Figure
Mumbai 1000
The L3 org unit has now got assigned to L0 Org unit , as this is the only org unit assigned to the MANAGER 2.2 user .
In such a case we are not able to write any generic formulae for the report. Is there a way to correct this issue? u2018Mumbaiu2019 should either get assigned to the L3 OrgUnit column is webi report , or is there a workaround that is possible ?
Thanks and Best Regards,
VjHi Vijay,
The problem you speak of is known and comes from the fact that the hierachy is flattened in the process of delivering it to WebI. Therefore there is no real 'solution' to the problem, just some work-arounds you can think of...
1)
Create a report variable that starts looking at the lowest level, if it is empty check one up, and so on until you found what you were looking for (the lowest leaf available), which by definition must be there (even if it is top level).
Using similar logic you can also get a 'number of levels avaible' and so fill in the complete tree (duplicating the highest level).
This is difficult to explain when end users create their own reports, though you could provide a template report with these variables in there already.
2)
Extend the hierarchy with duplicates below the lowest level.
So i.e. L0 Company - L1 Continent - L2 Country - L3 City- L4 City - L5 City- L6 City.
This will give back on the four levels for top authorization
L0 Company - L1 Continent - L2 Country - L3 City
For authorization on Continent:
L0 Continent - L1 Country - L2 City- L3 City
For autorization City
L0 City- L1 City - L2 City- L3 City
So in all situations the fourth level, the L3 Object will hold the City level.
This you can then use in your report.
Hope this helps,
Marianne -
Link between storage location and batch number to retrive the salk3 field
HI,
In my report i need to give the output as follows
For each lgort with related batch number we need to get the salk3.So i need to get a link between lgort , batch number to retrive the salk3.can any one give the tables from which i can get the link and retrive the data.
note: My report output should look like the fields lgort batch and unrestriced value of stock in tcode mb52.
subhashini.
Edited by: subhashinikb on Apr 1, 2011 9:38 PMHi,
In 2 steps, u can get the unrestricted stock value.
step1: Get material no (MATNR), plant (WERKS), batch (CHARG) and unrestricted stock (CLABS) from table MCHB by sending Storage location and batch number.
Step2: Get standard price STPRS from table MBEW based on condition where MATNR = MCHB-MATNR, BWKEY = MCHB-WERKS and BWTAR = MCHB-CHARG.
unrestricted value in MB52 will be (MCHB-STPRS) * (MCHB-CLABS). -
In order confirmation i need invoice number and delivery number.
Dear Experts,
I need invoice number and delivery number in order confirmation.
how can i get the delivery number an invoice number.
Program name: RVADOR01
Regards
AhmedHi
In the Order confirmation Only sales order details will be there
You better write a PERFORM statement in Script and in the subroutine fetch the Delivery number and Invoice number with the following links and display them in script
LIPS-VGBEL = VBAK-VBELN
LIPS-VGPOS = VBAP-POSNR
VBRP-AUBEL = VBAK-VBELN
VBRP-AUPOS = VBAP-POSNR
You can also can use the VBFA table
using Prev doc type = C (order) and Subsequent doc type = J to get the Delivery
and Sunsequent type = M for getting the Invoice Number
see the sample code for subroutine
REPORT ZMPO1 .
form get_freight tables in_par structure itcsy out_par structure itcsy.
tables: ekko,konv,t685t.
data: begin of itab occurs 0,
ebeln like ekko-ebeln,
knumv like ekko-knumv,
end of itab.
data: begin of itab1 occurs 0,
knumv like konv-knumv,
kposn like konv-kposn,
kschl like konv-kschl,
kbetr like konv-kbetr,
waers like konv-waers,
kwert like konv-kwert,
end of itab1.
data: begin of iout occurs 0,
kschl like konv-kschl,
vtext like t685t-vtext,
kbetr like konv-kbetr,
kwert like konv-kwert,
end of iout.
data v_po like ekko-ebeln.
read table in_par with key 'EKKO-EBELN'.
if sy-subrc = 0.
v_po = in_par-value.
select
ebeln
knumv
from ekko
into table itab
where ebeln = v_po.
if sy-subrc = 0.
loop at itab.
select
knumv
kposn
kschl
kbetr
waers
kwert
into table itab1
from konv
where knumv = itab-knumv and
kappl = 'M'.
endloop.
loop at itab1.
if itab1-kposn <> 0.
select single * from t685t
where kschl = itab1-kschl
and kappl = 'M'
and spras = 'EN'.
iout-vtext = t685t-vtext.
iout-kschl = itab1-kschl.
iout-kbetr = itab1-kbetr.
iout-kwert = itab1-kwert.
append iout.
clear iout.
endif.
endloop.
sort itab1 by kposn.
loop at iout.
sort iout by kschl.
if ( iout-kschl eq 'GSDC' OR
iout-kschl eq 'GSFR' OR
iout-kschl eq 'GSIR' ).
at end of kschl.
read table iout index sy-tabix.
sum.
write:/ iout-kschl,iout-vtext,iout-kwert.
out_par-name = 'A1'.
out_par-value = iout-vtext.
append out_par.
out_par-name = 'A2'.
out_par-value = iout-kwert.
append out_par.
endat.
endif.
endloop.
endif.
endif.
endform.
IN THE FORM I AM WRITING THIS CODE.
/:DEFINE &A1& = ' '
/:DEFINE &A2& = ' '
/:PERFORM GET_FREIGHT IN PROGRAM ZMFORM_PO1
/:USING &EKKO-EBELN&
/:CHANGING &A1&
/:CHANGING &A2&
/:ENDPERFORM
&A1&
&A2&
This Code is to be written in the PO form under ADDRESS window.
/:DEFINE &A1& = ' '
/:DEFINE &A2& = ' '
/:DEFINE &A3& = ' '
/:DEFINE &A4& = ' '
/:DEFINE &A5& = ' '
/:DEFINE &A6& = ' '
/:PERFORM GET_VENDOR IN PROGRAM ZMFORM_PO
/:USING &EKKO-EBELN&
/:CHANGING &A1&
/:CHANGING &A2&
/:CHANGING &A3&
/:CHANGING &A4&
/:CHANGING &A5&
/:CHANGING &A6&
/:ENDPERFORM
&A1&
&A2&
&A3&
&A4&
&A5&
&A6&
Regards
Anji -
Write message to Job log with message class and message number
hi folk,
When running a background job I'm able to write a message to the job log using the statement - Message "some text..." type 'I'.
In the Job log I can see the message "some text.." with a "default" message class and message number (but in my report i don't specify any message ID) so I have no idea it comes from.
Then I try to send a message where I specify the message class/number etc...using message id 'Z1' number 000 with "some text..." In the job log I now can see the "right" message class "Z1" and the number 000, but the message is empty?
Please advice how to write a message with the message class and message number.
Best regards
LinhNgHi Linh,
How did you provide the text "Some message"? Did you hard code it or used a text element?
Regards,
Immanuel. -
PO and order number not showing on shipment screen (VL03N)
We are implementing shipments in SAP. Two of the standard fields available on the variant builder in shipment display (t-code: VL03N) are PO number and Order number. However, these two fields are currently blank on the shipment display screen. Is there a configuration flag that needs to be set to pass these fields from the order to the shipment?
Hi
You are right . So far some other thread has been generated also before identifying same issue .
The option you have :
1. Administration --System initialisation -print preference >AR Invoice
However , if you want to bring it your serial number in one invoice , you probably need to customise your PLD .
2. AR invoice donot show serial number at row level because serial number is stored in different table .
Right click on AP invoice with serial number and Serial number transaction report or By menu bar Goto -->Serial Number and transaction report .
Hope this will narrow down what you are looking for
Thank you
Bishal -
I am new in teststand. I have create a componant C# using teststand engine.
I want to change directory where reports are save in c# and change serial number and name in report with C# command.
Is it posible.
Can somebody help me please,
RegardsHi,
Usually the properties of the report are set either using the Configure Report Dialog from the menu bar or during execution using the ReportOptions sequence callback. ReportOptions initially contains the information set from the Configure Report Options dialog but you are able to change this information during your sequence file execution by using the Override Callback sequence ReportOptions.
The serial number is set in the Sequence PreUUT and is called if you run the entry point 'Test UUTs'. A Dialog is displayed allowing you to enter your serial number. If you are calling 'Single Pass', PreUUT is not called and therefore you would have to provide some other mechanism to allow the user to enter the serial number and then write it to correct local variable in the process model sequence.
The User Manual should be able to give your more information.
Regards
Ray Farmer
Message Edited by Ray Farmer on 06-19-2007 11:30 AM
Regards
Ray Farmer
Maybe you are looking for
-
I have an old Mac Tower. I need to move data from the unit to an external hard drive. What kind of of hard drive must I purchase so that it works with the Tower? There is not a lot to transfer.
-
With multiple contact lists, list title not correct
I have an original iPhone w/ 2.0 software, hooked up to my company's Exchange server. I created multiple contact folders on Exchange to categorize my contacts: Clients, Company, Friends, Family, etc. The multiple folders show up just fine as Groups o
-
How Can Viewers skip forward and backward between timelines!?
You can skip forward and backward through chapters that are on the same timeline but I can't skip backward to a timeline that came before the one I'm on. I thought this was an easy question someone must know the answer to this. I just need to check
-
Hi, How to get Differential Excise duty in SAP. If I Transport the material from Plant1 to Depot1 Assassble value 100 Rs and Excise Duty 16%, 2% and 1%. But in Depot if I sale at 150 Rs then How can i get the differential Duties in SAP. Pls Explain
-
This meassage I've got after trying to install the software:AirPort Utility can't be installed on this disk. The version of Mac OS X on this volume is not supported. Please, advise.