PO history status texts

Hi All,
For subsequent debit and credit, the PO history is shown with indicator NB-L.  Also, in some cases I can PO history with indicator SD-L (Subs. deb. log. IV).  How is this status getting updated in PO history. Which transaction will update this, and could you please explain the process to be followed to get this status in PO.
Thanks in Advance.
Alex

Hi!
A subsequent debit/credit will appear with the indicator NB-L (in english SD-L)  in the                    
po history. This is defined in table T163B.                                             
So you can check the customizing OMRA - order history categories                        
for subsequent debit/credit.                                                                               
If you look at the po history via transaction ME23N the invoice document                
will have the category  NB-L if it is a subsequent debit or credit, if you look at the                          
values assocated thereto, i.e the quantity and amount in the po history                 
tab  you will find that if the invoice is invoice is a subsequent debit the values will appear positive.                          
(SAP note: 366713   )
Best regards
Erika

Similar Messages

  • SM58 status text " No service for system SAPERP, client 800 in integr "

    In Idoc to file scenario:
    i have fallowed this blog to configure ALE settings
    /people/swaroopa.vishwanath/blog/2007/01/22/ale-configuration-for-pushing-idocs-from-sap-to-xi
    I have generated one idoc successfuly from sap r/3 system.
    but i didn't find any idoc in xi server.
    control records are
    receiver:A000000036,(RFC DESTINATION->LS_XI_100( Remote login sucessful for xi system))
          LS_XI_100
          LS
    Sender: SAPERP
         LS_SAP_800
         LS
    ID: Adapter specific identifiers are( LS->LS_SAP800, R/3->ERP,CLIENT,800)
    so i have gone to tcode sm58 in sap r/3
       where i found the status text "No service for system SAPERP, client 800 in integr)
    Please help me from this problem.
    Regards,
    Deviprasad.

    Hi Deviparasad,
    please create a techincal system and busniess system of type ABAP in XI SLD if you have already created the techincal system and busniess system  then check whether client 800 is used or not if include client 800.
    please reward points
    Regards
    Sreeram.G.Reddy

  • How to Change  status text in ESS travel managemnet screen

    Dear All,
    What is the procedure to change the status/processing status text change in travel management  ESS screen.
    Regards,
    Palia

    Hi Pailia and all,
    I am with a client who has the same requirement (to customise the standard "processing status" wording which is shown against each trip in the ESS screen).  So far, I have not been able to identify where these texts can be changed.  If anyone can help that would be much appreciated?
    Many Thanks,
    Jack

  • IDOC Posting To XI Failed With Status Text "::000" in SM58

    Hello Gurus
    Can u please suggest me how to overcome the problem with Custom Idocs while trying to send from SAP R/3 to SAP PI(XI).
    The status text is displaying as "::000" with no other details, in SM58 of the sender system i.e. SAP R/3.
    The Idocs status in the sender system is showing as 03 with the message "Idoc sent to sap system" in transaction BD87.
    So I am getting confused where I missed the configuration.
    Please suggest how I can troubleshoot the above.
    <<Text removed>>
    Regards,
    Rk.K
    Thanks in advance .
    Edited by: Matt on Jun 24, 2011 9:58 AM

    Thanks  a lot for your support.
    I have tried all the suggested solutions......but my problem was not solved.
    The Metadata should be automatically created when the IDOCS successfully received by the XI server.
    If it is not created then we should clear the SLD Cache in XI and try to create a new Metadata by giving the Custom IDOC Name and Port.
    Even I tried with a Standard Idoc ORDERS05 , but I failed to do so.
    After doing the above step I am getting the Information pop-up message "I::000".
    Regarding RFC, I have created 2 users in both the systems with the same name(ALEREMOTE) of type "System".But,I am unable to   Remote Login from XI to R/3 whereas the vice -versa is successful.
    Are there any chances for this being the reason for failure of Idoc processing?
    Such information message"I::000" is completely inexplainable.
    Kindly, suggest a solution for it. 
    Thanks.

  • IDOCs in trfc with status text as error

    Hi,
    I have IDOCs in trfc queue with status text as 'The ABAP/4 Open SQL array insert results in duplicate database records'.
    How to reach this error point and rectify the same.
    Regards,
    Sheetal

    Hi Sheetal,
    Please refer the link,
    Successfully posted IDOC from XI but not reflected in Receiver R/3 system
    Best Regards.
    Reward points if it is useful.

  • Status text error

    Hi all,
        I need help in resolving this issue. When viewing a production order status in COOIS transaction, I am getting a popup information message " Status text for object ORXXXXXXXX in order XXXXXXXXXX could not be determined". After that in the next screen (Order Information system), if i try to save that order, program terminates giving a runtime error "Message_type_X". Someone help in this regard.

    Hi,
    For changing the user status you can use this function module.
    STATUS_CHANGE_EXTERN.
    Hope thsi will help.
    Regards,
    Swarna Munukoti.

  • Status Text 000

    Hello
    I tried an Idoc. It doesn't reach XI. It does not appear in SXMB_MONI. In SM58, I see status text 000. What does that mean ?
    However when I go to WEO2 I see Current Status as 03.
    What should I do and how woiuld I proceed ?
    Midhun

    Hello Ravi
    When I double click on it, I get this : : 000
    I don't find anything more
    I went to SM59, RFC Destination from QAS of XI, then did a Utilities -> Test -> Authorization Test
    I got this as a result.
    Logon Cancel
    Error Details Name or Password is incorrect (repeat logon)
    So there is an Error with SM 59 that I created to ECC from XI.
    Midhun

  • Status text for Equipment

    I am calling function
    CALL FUNCTION 'STATUS_READ'
    which returns a table of status for the equipment in the form 'E0001'.
    I want to get the text description of that status  such as 'ESTO' in order to compare with a value beign read from an input file
    Where can I find the textual description of the status
    J.J

    hi JJ,
    In Table <b>TJ02T</b> you can find the system status text table ...
    if it is answered please closed the thread by marking helpful answers else let us know for what you are looking for
    Regards,
    Santosh

  • IDOC Status text

    Hi,
    In the status table EDIDS some times the status message is storing in the field STATXT and some times it is storing in the variable STAPA1. As of now I am using the variable STATXT for fetching the status text but some cases STATXT is showing description as & & & &  and STAPA1 is showing correct status text. How to use these two variables correctly. If possible please send me the code I will give points.
    Thanks a lot in advance.

    issue with code for idoc
    interface code required........................IDOC
    Extracting data from iDoc tables
    Please reward points if helpful.

  • E-Recruiting Status text change

    Hi,
    My client is inquiring about the level of effort involved in changing the status titles (ex. Rejected to Not Hired), table T77RCF_RCD2STAT is used to assign status reasons to statuses. Can you please assist me at where the change would need to be made and what the level of effort and impact of this change would be?
    ...Naddy

    Hi Naddy,
    the status texts are domain values. So to change the texts you would have to do a modification on the domain.
    The dpomain names are like the names of the data elements: rcf_<object>_status while object is requisition, application, candidacy, ... .
    As long as you only change the texts and not change the allowed values i don't see a lot of impact. Off course with each support package / upgrade you would have to check the change as you do for each modification.
    Another effort which might be necessary is to check OTR text and messages if anywhere SAP put the status description in. This would have be to be checked and if found would have to be adapted.
    Best Regards
    Roman Weise

  • I just now accidently cleared the history of texts on one contact on an Iphone 5. Can I retireve it?

    I just now accidently cleared the history of texts on one contact on an Iphone 5. Can I retireve it?

    Restore the entire device from the most recent backup (hopefully created prior to erasing the converstation history).  This will put the ENTIRE device back exactly as it was when the backup was created.

  • Sap RFC status text chinese

    Hi forum,
    My process chain crashed this night.
    When I look in my transactional RFC I see this rfc:
    Caller     ALEREMOTE
    Function Module     RSAR_TRFC_DATA_RECEIVED
    Target System     BWPCLNT020
    Date     28.01.2011
    Time     02:54:59
    Status Text     挀漀渀渀攀挀琀椀漀渀 挀氀漀猀攀搀 ⠀渀漀 搀愀琀愀
    Strange.
    Could you help me to find how to solve this error ?
    Thank you,
    Philippe

    did you install chinese  language in your system?

  • Spool History Status is complete for Incorrect email or Fax

    Hi All,
    We have configured mail and fax for a Ouput type. The spool history for this Output shows "completed" even if we give a Wrong email id or Fax number.
    Can anyone suggest,where can we check this?-----
    Checked in the Output Device configuration..
    "Do not Query host spooler for output status" is not checked. If this is the problem..
    Then why am i not able to replicate the issue,when the same setting is available in Assurance.
    But the issue could nt be replicated. Kindly enlighten..
    Edited by: Dhilipan Nair on Oct 17, 2011 3:45 PM

    Welcome to the forum.
    The first landing page is asking for a Fonera login (which we are not).
    The second is asking for your primary BT username and password (BT email address and password) by which route we log in as BT BB customers.
    To log in therefore, you have to jump from the first landing page to the second.  Just create a bookmark for the second landing page on your browser.
    Hope that helps
    AQ.
    "Welcome to Royston Vasey - You'll never leave."

  • Purchase order history short text

    hi,
    may i know where i can get the short text at first column in purchase order history tab in me23n.
    for example DCGR, GR, DCIn, etc...
    thanks

    Hi
    Check in IMG - MM - purchasing - Statistics - purchase order history categories. Here you can find PO history details.
    Thanks

  • How to edit the Step status text

    For example, I want to change the status result which is produced on a report from 'Passed' to 'GO' or 'Failed' to 'NOGO'. I know that you can edit the report colors for the result text in the Report Options menu, but I can't seem to find a way to edit the actual result text. I've also looked in the horizontal.xsl stylesheet to no avail.

    I would start with modifying the report header. In the sequence ModifyReportHeader look at the parameter ReportHeader. It contains the UUT Result, usually "Passed" "Failed", "Error" or "Terminated".  Replace that part of the string accordingly.

Maybe you are looking for