PO in Error to Process Status
Hi
In SRM4.0 ECS we have a peculiar issue.
1. PO created in SRM with account assignment (cost Centre & GL Account).
2. PO end up in "ERROR IN PROCESS" status.
3. In SRM backed PO in T-Code:BBP_PD is showing as ORDERED but also "Transfer Failed (E.Sys.)" status "I1132".
4. Such status occurs if there is error in account assignment
5. We have verified the existence & correctness of cost centre & GL account.
PO is hanging in SRM & not getting replicated to R/3.
Thanks & Regards.
Sandip.
Thanks Nikhil for your reply.
In RZ20 I am getting error due to account assignment, which I have validated that all things are in place correctly.
My BBP_PD status as shows:
HEADER I1015 Awaiting Approval X
HEADER I1021 Created
HEADER I1038 Complete
HEADER I1043 Ordered
HEADER I1080 In Transfer to Execution Syst. X
HEADER I1120 Change was Transmitted
HEADER I1132 Transfer Failed (E.Sys.)
HEADER I1180 Document Completed
0000000001 I1021 Created
But in SRM front end PO document status is "Error in Process".
Regards.
Sandip.
Edited by: Saha Sandip on Jun 28, 2011 7:34 PM
Similar Messages
-
Purchase Order with "Error in Process" status????
We are currently using SRM 4.0 in an extended classis setup. We have been live for appropriately 1 yr and half and I have noticed more and more Purchase Orders going into status "Error in Process" when a change (increase value, add line items, change name) has been performed on the PO and then the PO is approved. The PO will sometimes show up in the SRM Administration Tab occassionaly but more than less they don't and we have to search for failed PO to find all the "error in Process" PO's. I have had success with having the user just change something in the name of the PO and then re-order and the PO will then go into R3 but I was wondering is there something in the system other than having the user change the PO that I can do to push the PO into R3. When we have similar issues with confirmation I run tcode SWO1 and use the GUID ID and click transfer to push it to the backend. Is there anything I can do in the backend that will send the PO into R3 and update the status to Ordered giving there is no apparent error in the system?
Hello Robert,
We've been facing a similar issue (we are also in SRM 4.0 Extended Classic Scenario): Sometimes, when the user modifies a purchase order from SRM (for example, to add some new items), the purchase order replication to the backend failed.
In the Application monitor, we had the following backend error:
"Insert Cost Center for Item X"
but the Cost Center value was correct (other items from the same purchase order had the same account assignment).
We thought the problem was related to the function module in the backend which was changing the purchase order, so we put a SAP OSS Note.
In this OSS note, SAP recommended us to implement note 1005615, and the problem was solved.
Check if this note could be implemented in your backend.
Hope this helps you,
Regards. -
Error in Process status after confirmation
Hi,
when we post confirmation in SRM for a particular PO it is showing the status as error in process.how can i check what is the probelm assocoiated with this confirmation.
I went to Rz20 and got the Idoc.but when i tried to process it manually in WE19.it shows partner profile not maintained
can any one suggest me what needs to be done
regards
subbuHi Can you reproduce the same error in development?
if so you can easily finda problem.
hope it may be error in process state in confirmation.
if you recreate this it helps.
1. error in process
2. again to create confirm - posted in a backend.
it may or may not be isolated error. try to replicate in development with same data.
muthu -
PO ERROR IN PROCESS - STATUS NOT UPDATING
Please assist, PO is error in process upon push Material already in full the PR had an old PO which was deleted at the SRM yet still active at the back end we try to push the old PO but the status didnu2019t update and try to delete the PO at the back end but it wasnu2019t possible. We have also tried to change the PO status yet still remain error in process. THANKS
Hi,
Cuold you clarify error messages as displayed in BBP_PD?
Any entries in RZ20?
Thanks and Regards,
Abraham -
When GOA goes to error in process status?
for example
In purchase order, purchaser can change the plant at header or item level even follow-on document exists.
The symptom can be reproduced by executing the following steps,
1. Create purchase order in extended classic scenario
2. Create partial invoice for the PO item.
3. Try to change the plant of the PO in SRM, there will not be any error message. ORDER the PO, now the PO will go to 'Error In Process' due to backend error - 'Plant can no longer be changed'.
System should not allow the user to change the Plant in PO, if any follow-on document exists (either confirmation or invoice).
suggest me to recreate for GOA
i want to recreate GOA too ERROR IN PROCESS .Wrestling with technical resource to recreate the issue.
any trick and tips are welcome.
MuthuHi Can you reproduce the same error in development?
if so you can easily finda problem.
hope it may be error in process state in confirmation.
if you recreate this it helps.
1. error in process
2. again to create confirm - posted in a backend.
it may or may not be isolated error. try to replicate in development with same data.
muthu -
PO Output is possible for SRM PO's in status Error in Process
Hello All ,
We have a requirement, where system should not process the PO output when the PO is in u201Cerror in transfer status u201C .
While creating the PO -> If the SRM PO is in Error in Process status, output will be processed and its sent to vendor also.
Since Error in Process status in business point of view consider as error free PO but fails to transfer the PO to back-end due to some technical or customization.
While changing the PO -> if the SRM PO is in Error in Process, We can stop the process the output with the help of OSS Note 1324180 which has been already implemented.
Can anybody tell me how can we achieve this . Any pointers. We have also tried with condition based output workflow start conditions also .but it couldnu2019t work .
Thank you
BharathiDear Expert,
Please check in RZ20 what specific error is being shown and accordingly either error message can be changed to warning message or customization should be done so as to replicate the PO into backend.
Thanks and Regards,
Sathya Kumar. -
P.O Error in Process after copying the existing item in change mode
Hi All,
We are in SRM 5.0 Server 550 and SP15 and are using Extended Classic Scenario.
We are facing a peculiar issue, when an already created P.O (Free text - goods) is changed and a new line item is added either manually or by copying the existing line item and then ordering it, the P.O is going into Error in Process status.
This is happening only when i am adding a new item (material) to the existing line item (material) but when i am adding a service line item in the change mode to the existing material line item, the P.O is getting ordered without any issue.
I believe this is SAP bug and raised with SAP for OSS.
Meanwhile i would be grateful if you can provide any resolution to this issue and provide any OSS note number (If one already exists).
Regards,
TejaHi Teja
it works fine for me.
old po template..
taken describe procureemnt - goods
copy the line item
changed qty and price
POs created for both items in one PO since vendors are same?
what the error message says in the application monitor or rz20 / monitor sc.?
for me i had a contract in my pld pos.(sc).
muthu -
Error in Process confirmation editing
Hi, Experts,
One of the users did a confirmation and got Error in Process status.
I know that he can change this confirmation thru Display and Process Confirmations Centrally ,
but the client doesn't want me to add the user this role.
Is there another way to change this confirmation? May be, something with authorizations
but not adding the central confirmation.
Good Day,
Rami Kleiman
SRM ConsultantHi,
If it is Material confirmation, check the idoc status.
regards,
MRao -
Confirmation in error in process
HI,
We are using SRM 4.0 (SP12) with extended classic scenario.
Today morning we had a situation where the batch jobs scheduled in SRM is not displaying in SM37. System couldn't reschedule any of the batch jobs. We ran the house keeping job and then everything seems to be working fine.
But since evening, the confirmation posted are going to error in process status. IDOC posted in SRM and backend are not in error
status. Still confirmations are showing as error in process. Till evening confirmaiton was posted without any issues.
CLEAN_REQREQ_UP and BBP_GET_STATUS_2 jobs are running fine. But the confirmations posted are showing as error in process status. Entries in table BBP_DOCUMENT_TAB is holding the PO from further confirmations. Not sure whether any batch job is not running.
Could you please help me to fix the issue?
Thanks,
ArunHi Arun,
Try to follow below steps, hope you will get something
1) Check confirmation application monitor error what is the cause
2) Check BBP_PD Error Message
3) Execute the FM (BBP_PD_CONF_TRANSFER_V2) for the error confirmation in SRM and after execute a IDoc will generate (Failed) Iodc
4) Check related Idoc in WE02 or BD87 and re-process
5) Check related confirmation in R/3 and SRM
Regds,
jai -
Hi all,
What does processing status code "Error" indicate in rcv_headers_interface.There is no error message in po_interface_errors.There is nothing available in the log of Receiving Transaction Processor.Can someone guide me what exactly this means?
Thanks in advance!!Hi Sandy;
Please see below notes which could be helpful
Resolving records stuck in the Receiving Transactions Interface [ID 50903.1]
http://docs.oracle.com/cd/E19509-01/820-4390/ggtrm/index.html
Regard
Helios -
PO status "ERROR in PROCESS" after confirmation
Hello Experts,
problem is :
When i create Purchase order its successfuly gets replicated in the Backend as we are on ECS scenario.Now when i create Confirmation the confirmation is also successfully created in the backend system but PO status gets changed to "ERROR in PROCESS" . i check in RZ20 and error is : "Purchase order 2400002371: Transfer Failed; Resubmit" means Application error while updating purchase orders in the back-end system.
I check my port settings and message type in partner profiles looks OK to me otherwise Confir mation will not cretae in the backend system but yes i can see its created and all my data is fine then why for all the Purchase order after creating confirmation status gets Change ?
Thanks in advance
SmritiHi Smriti,
Try executing the function module BBP_PD_PO_TRANSFER_EXEC_V2 using SE37 transaction by giving the header GUID of P.O.
Please take the GUID from BBP_PD transaction by giving the P.O number as input and BUS2201 as transaction type.
Please check the P.O status after executing the above function module.
Is this happening for all P.Os once the confirmation is posted or for any specific P.Os (2 P.Os as mentioned by you).
Let us know the outcome to help you further in resolving this issue.
Regards,
Teja -
Status "ERROR IN PROCESS" for invoice
Hi,
we have an issue regarding invoice document.After posting the invoice document in SRM the status of the document should change, however the status of the invoice is error in process.
Dont know why, we have maintained all the attriburtes in organizational plan, and in vendor group too.Can any one share or throw some light on this issue. We have created a SC with local material, PO, Confirmation, and invoice.Issue is only with invoice.Kindly share some knowledge to resolve this issue.
Maximum points will be awarded.
regards,
IGAHi,
The invoice is created in SRM but it doesn't replicate, Have you checked the inbound IDOC in your backend (Tx we05)
In the status segment you should see the error.
I hope this help
Best regards -
SRM PO Changes Error Status - Error in Process (SRM 4.0 and ECC 5.0)
Hi All,
I created PO in SRM from Sourcing (Shopping Cart) and it is replicated to Back End (ECC 5.0). But I did not post GR or Invoice Verication with reference to PO.
When I am trying to change PO in SRM (SRM Webbrowser - Processing PO) like Quantity, I am receiving the PO status as Error in Process.
Please let me know do I need to configure anything for this issue or need to implement OSS Note/BADI.
Thanks a lot in advance for helping me.
Best Regards,
Sudarsangot solution
-
Service entry sheet reversal document (Status: Error in process) List repor
Hi,
I have a requirement, to have or develop report which gives service entry sheet reversal documents (Status: Error in process),
while investigation i found below options (not exactly meeting my requirement)
1) Display and Process Confirmations Centrally >Document Category>reverse documents
which giving all reversed document list (need only error list) and it is giving only my puchasign group list (need all purchasing group list)
2) I can execute PPB_PD with BUS2203>status>I1019
is there any way/possible option that i can execute a report of reversal service entry sheets which ststus :error in process"
Thanks,
JaiHi Christian,
Thanks for your reply.
But this is what has happened. No the SES was not deleted in ECC before the confirmation was deleted in SRM. Our users don't have access to ECC T-codes.
Also I have checked the time at which the cancellation was created and everything is in sync.
How can i change the status of SES from 'Error in process' to 'posted in backend'?
Please advise
Thanks -
Status message shows " Error in Process" in SRM
Hi,
At the time of Confirmation, status message shows " Error in Process " in SRM.
So please suggest the solution & the possible cause for the Error.
Thanks,
NehaPl goto RZ20, SAP Enterprise Buyer monitor--confirmation and open the alerts.
All error logs have to be there. How will you analyse otherwise as to what went wrong?
Have you done the partner profile settings for confirmation? Defined ports in SRM? Are you on classic/extended classic?
Nikhil
Maybe you are looking for
-
HT1689 How do I save an incoming number if its not on my contact list?
How do I save an incoming number if it's not on my contact list?
-
Question about dynamic class loading with thread built in
Hi , I am trying to load a class with a thread built in from the network. I write my network classloader, convert the class to a byte array and transmit over the network using socket. This step seems fine but when I tried to load the class at the rec
-
I've been struggling to set up my package structure properly. Here's the situation: C:\project\impl2 :contains the files in "package impl2" C:\project\impl :contains classes that import impl2.* (let's call these the "child classes") (OS is Win2000) W
-
URGENT !!! AQ performance issues in ORACLE 8.1.7.2
Does anybody have an ideea how fast the enqueueing/dequeueing is when the size of the queue goes up to 500.000 elements ?! I have problems when dequeueing from a queue with only 85 elements (it sometimes takes 7-8 minutes to dequeue one element); is
-
Table containing cost center and PO data
hello, i need a table where the cost center(KOSTL) is defined as a primary key. the table should also contain PO numbers.