PO Intercompany with plant of the same society

Hi guys,
my problem is this:is there a way to block two Intercompany Purchase Orders gone out from two Plants which belong to the same society?If I block the vendor on the Purch Organization I risk to block the movement of the Company..
have you any suggest?
Thanks in advance
Bye
Massimiliano

I would be more clear:some users have been able to create a PO of type Intercompany(IC) in which the vendor code is the same Plant which buys the product.. that is the code of the vendor is the same code which you can find in customizing step 'Stock transport order' in the field 'Customer no.Plant in reference to the Plant entered in line item of the PO.
Can I have a way to block these types of Po at the beginning?
thanks again
Bye

Similar Messages

MM STO between Plants under the same company code

Hi experts,
Please guide on the configuration steps for doing STO between Plants unders the same company code.
We have company code 100 in that Plants A B & C are theie. Each Plant can do STO to other Plant.
How to configure this scenario?

Dear,
Please follow bellow path
1. Create a vendor for the Company code of the receiving plant using account group 0007 via T-Code XK01.
2. In the purchasing data view assign the supplying plant and the schema group
3. Create customer with the sales area of the vendor.
4. The shipping conditions, the delivering plant and the transportation zone determine the route in the STO.
5. In the pricing procedure determination relevant to the STO assign document pricing procedure and customer pricing procedure to get the pricing in the invoice.
6. Maintain condition records for pricing condition.
7. Maintain carrier as a partner in the customer master.
8. In OMGN select the supplying plant and assign the company code and sales area. Similarly select the receiving plant and assign the company code and sales area (The company code to which the plant is assigned to).
9. Assign the delivery type and checking rule to the document type.
10. And finally, assign the purchasing document type to the supplying plant and the receiving plant.
11. Create the STO using T-Code ME 21N and save.
12. Check for release strategy if any and release using T-Code ME 28.
13. Create delivery in background using VL10G.
14. If delivery is created, it is an indication of correct configuration and master data creation.
Stock transfer between two plants in different company codes is known as inter company stock transfer.
Material should be maintained in both supplying and receiving plant MM01
Stock should maintain only in supplying plant MB1C
Create receiving plant as a customer in supplying plants company code and sales area XD01
Assign this customer number in receiving plant details OMGN
Assign supplying sales area in supplying plant details OMGN
Assign delivery type NB for in combination of supplying/ receiving plants.
Create STO ME21N
As it is normal there in the item details we should get shipping date i.e. customer number
Go for Delivery VL10B
Shipping point *****
Select PO go for execute
then select the delivery then go for delvy ............create delvy,,,, delvy number generated.
Goods Issue VL02
Delvy doc **********
Click on picking
enter the picking qty
Click on PGI
in the mean time check in the PO history you will get the details
Goods receipt MIGO
Stock transfers that include deliveries and billing documents/invoices are only possible between plants belonging to different company codes.
If you want to carry out a cross-company-code stock transport order with delivery but without a billing document, you must set the Relevant for Billing (data element FKREL) indicator in Customizing of the item type to "blank" (Not relevant for billing).
The following applications are involved in this type of stock transfer:
? Purchasing (MM-PUR) in entering the order
? Shipping (LE-SHP) in making the delivery from the issuing plant
? Billing (SD-BIL) in creating the billing document for the delivery
? Inventory Management (MM-IM) at goods receipt in the receiving plant
Invoice Verification (MM-IV) at invoice receipt in the receiving
Transfer of goods from one location to another location, it may be between plants within the same company code or in different company code's plants.
within the company code, but plants,
receiving plant will raise the STO in Supplying/issuing plant-ME21n,
Supplying plant will deliver the goods to receiving plants ,
then we need to pick n post the Goods Issue-VL02n,
now when we can observe that the STO qty will be added into receiving plant and reduced in Delivering plant,
To do this, we need do prior customization in SPRO-IMG,-
material should be created in both plants( receiving & Supplying)
-maintain the stock only in supplying plant
-create a dummy customer in supplying plant's sales area(if u have one sales area, create in tat comp code n sales area)
-assign this customer number to receiving plant's details along with the sales area,
-Assign the STO doc type(UB) to Supplying plant, along with checking rule
-Assign the Del type (NL/NLCC) to Supplying n receiving plant.
Stock Transport Order:
http://help.sap.com/saphelp_47x200/helpdata/en/4d/2b911d43ad11d189410000e829fbbd/content.htm
http://help.sap.com/saphelp_47x200/helpdata/en/4d/2b917843ad11d189410000e829fbbd/content.htm
http://help.sap.com/saphelp_47x200/helpdata/en/4d/2b918543ad11d189410000e829fbbd/content.htm
u can also use the SAP building block
with delivery
http://help.sap.com/bestpractices/BBLibrary/html/P36_IntStockTransDel_EN_IN.htm
without delivery
http://help.sap.com/bestpractices/BBLibrary/html/P38_IntStockTransWithoutDel_EN_IN.htm
Regards,
Mahesh Wagh

Now that the photo gallery in MobileMe is ending, is there another photo sharing site to which existing iPhoto albums can be transferred as is, with photos in the same order and with titles, and with minimal problems?

Now that the photo gallery in MobileMe is ending, is there another photo sharing site to which existing iPhoto albums can be transferred as is, with photos in the same order and with titles, and with minimal problems?

No. If you don't have the album you originally used to create the galleries you can do so by dragging the photos from each gallery to a new, empty album. Then when you find the photo sharing site/option you have decided on you can easily upload each album to the site.
Another option is to obtain a hosting service and create iWeb photo pages for each album and future albums similar to this photo page in one of my demo sites: iPhoto Book as an iWeb Slideshow. Or you can use the iWeb album page and have an album for each iPhoto album on it like on this demo page: Page-7 .
OT

Material Ledger not activated in both plants within the same company

Hi Experts,
I would like to ask what would be the impact if we activate ML only in one plant. The company code has 2 plants assigned to it. We are currently implementing transfer pricing but only to one plant. What is the impact of activating the PC valuation to other plant under the same company code?
Thanks

Hi,
Usually to add transportation cost or freight to the material cost at the time of STO we will use the seperate pricing procedure & condition types.
same way we can do one thing..
1)define the seoerate pricing procedure for STO
2)include condiion types for mfg cost, transport cost, margin etc etc & define the condition types in such a way that this all condition type values are get added to inventory.
3)create STO & give values for all condition types in STO
4)create delivery PGI
5)create excise invoice
6)create GRN at receiving plant.
hope its clear.
Regds

Hi, I have a macbook air os x 10.9.5 and I have problems with the app store. It doesn't open anyway. so, how can I install it again or update. I have problems with preview too, the same, doesn't open the application

Hi, I have a macbook air os x 10.9.5 and I have problems with the app store. It doesn't open anyway. so, how can I install it again or update. I have problems with preview too, the same, doesn't open the application

Reinstalling OS X Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Reinstalling OS X Without Erasing the Drive
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility and press the Continue button. After Disk Utility loads select the Macintosh HD entry from the the left side list. Click on the First Aid tab, then click on the Repair Disk button. If Disk Utility reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit Disk Utility and return to the main menu.
Reinstall OS X: Select Reinstall OS X and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
Alternatively, see:
Reinstall OS X Without Erasing the Drive
Choose the version you have installed now:
OS X Yosemite- Reinstall OS X
OS X Mavericks- Reinstall OS X
OS X Mountain Lion- Reinstall OS X
OS X Lion- Reinstall Mac OS X
Note: You will need an active Internet connection. I suggest using Ethernet
if possible because it is three times faster than wireless.

Can SS9 coexist with SS8 on the same box?

Hello,
First off, congratulations on the SS9 release!
I'm about to try it out, but I can't make sense of some what's said in the release notes.
"If you have Forte Developer 6 software, Sun ONE Studio 7 software, Sun ONE Studio 8 software, or Sun Studio 8 software installed, be sure to follow the installation instructions and install the Sun Studio 9 software in a different directory."
The next paragraph says:
"If you have Sun ONE Studio 8, Compiler Collection software or the Sun Studio 8 software installed, be sure to follow the installation instructions and install the Sun Studio 9 software on a different system."
The install guide says:
"If you installed an Early Access version of the Studio 9 software or any other version of the Sun Studio software on your system, then install the current version of the Sun Studio 9 software in a different directory."
So can SS9 coexist with SS8 on the same box, albeit in a different directory, or not? I have an S8 box with SS8 on it.
Regards,
Sergey

I don't have the installation guide handy, but the Release Notes say something different. The Install Guide is wrong about the EA and CA versions. The wording about installing on a different "system" is also wrong. I'll forward this information and see what can be done about correcting it. (No matter how many times a doc is reviewed, it's still wrong ... )
The rules for Sun Studio 9 installation are actually simple, and are the same as for all previous releases:
1. You can install any number of different releases on one system, but each must be installed in a different base directory.
2. You can install only copy of a given release on one system.
The default base directory is /opt, and if any release is installed there, additional releases must be installed somewhere else. For example, you could install Sun Studio 9 in /SS9 or /export/SS9 or any place other than /opt.
Because of #2, you must uninstall an EA or CA version of a release before installing another version of that release. For example, if you install the first EA version, you must uninstall it before installing the second EA version, or CA version or final release version. If you installed the CA version, you must uninstall it before installing the final release version.
Patches to an existing installation don't count as a new version. A patch by definition is installed on top of the release that it patches.

How can I record a guitar and my voice (only voice with mic) at the same time ?, how can I record a guitar and my voice (only voice with mic) at the same time ?

how can I record a guitar and my voice (only voice with mic) at the same time ? I have one interface with Input 1 mic, Input 2 guitar, everything is working correct, but how can I activate multi recording or something like that... thanks

Set your inputs on your channel strips and make sure you have one set to input 1 and the other input 2. Arm the 2 audio tracks(the "R" in the track header. They will turn red and flash), then hit the record button.

Is it possible to listen to music through bluetooth and be on a call with earbuds at the same time?

Is it possible to listen to music through bluetooth and be on a call with earbuds at the same time?
I would like to be able to talk on my iPhone with the EarPods while playing music via Bluetooth in my car. Are there any third party products that will allow this?

Sorry, iOS will pause the music playback when you are on the phone call. You can set iOS to use bluetooth for your audo playback on your music app, and select the earpods for the phone app, but as soon as you answer the phone call, iOS will pause the music playback. This is a core OS feature, so you will not find any certified iOS app that will do what you want.
As a side note, please use extra caution when using your ear pods while driving. It is not safe as you may not hear emergency vehicles, car horns, railroad crossing bells, etc., and it is illegal in many states (in the US).

Hi, i am wondering if i use 4g together with wifi in the same time will this increase the internet speed ?

Hi, i am wondering if i use 4g together with wifi in the same time will this increase the internet speed ?

The iPad has a micro-SIM card slot - nothing special or unique about it.
The iPad is not sold as carrier locked.

But i'm worried about the audio quality which matters to me the most !! is the audio quality on iPod with ear-pods the same as iPad with earpods ?

hi guys !! i'm an ipod touch 5g user ! and i want to switch to ipad !! but i'm worried about the audio quality which matters to me the most !! is the audio quality on iPod with ear-pods the same as iPad with earpods ?

thnx i'm more satisfied now !

AirPort Express wireless connection, when I surf the news sites so I linked to **** pages. And must close the window. If I use my iPhone with Internet sharing the same computer, then I have no problem. I believe that it is in AirPort Express, and wou

AirPort Express wireless connection, when I surf the news sites so I linked to **** pages. And must close the window. If I use my iPhone with Internet sharing the same computer, then I have no problem.
I believe that it is in AirPort Express, and would have to clean it. How do you do that?

You need to use the Express in router mode.. I think you are trying to use it in bridge mode.. but you need to give us a lot more details.. screenshots might help more than anything.

I have two IPODs and I want to synchronize with ITUNES in the same computer. How can I do it?

I have two IPODs and I want to synchronize with ITUNES in the same computer. How can I do it?

See:
How to use multiple iPods, iPads, or iPhones with one computer
What is the best way to manage multiple...: Apple Support Communities

Sharing iphoto and itunes with accounts on the same computer

I have admin rights on the PC and would like to give the guest account access (on the same PC) to the i-photo and i-tunes libraries under my account. How can I do that

What version of iPhoto?
For iPhoto 09 (version 8.0.2) and later:
What you mean by 'share'.
If you want the other user to be able to see the pics, but not add to, change or alter your library, then enable Sharing in your iPhoto (Preferences -> Sharing), leave iPhoto running and use Fast User Switching to open the other account. In that account, enable 'Look For Shared Libraries'. Your Library will appear in the other source pane.
Any user can drag a pic from the Shared Library to their own in the iPhoto Window.
Remember iPhoto must be running in both accounts for this to work.
If you want the other user to have the same access to the library as you: to be able to add, edit, organise, keyword etc.
Quit iPhoto in both accounts. Move the Library to the Users / Shared Folder
(You can also use an external HD set to ignore permissions, a Disk Image or even partition your Hard Disk.)
In each account in turn: Double click on the Library to open it. (You may be asked to repair the Library Permissions.) From that point on, this will be the default library location. Both accounts will have full access to the library, in fact, both accounts will 'own' it.
However, there is a catch with this system and it is a significant one. iPhoto is not a multi-user app., it does not have the code to negotiate two users simultaneously writing to the database, and trying will cause db corruption. So only one user at a time, and back up, back up back up.
Regards
TD

Can I have two identical PCs with clones of the same hard drive?

This all started when I had a problem with my first pc, a gateway laptop, would not wake up from sleep due to, supposedly, a driver problem. I didn't want to send it off for my free, under-warrantee, repair and be without a computer for however long that
would take. So I bought another one and took it to a local dealer to clone the hard drive of the first one to put on the new one.
This created a number of odd problems which eventually I figured out had something to do, it seemed, with Microsoft not allowing two identical machines to exist like that. I only plan to use one, the other one being exclusively for backup or in case something
happened to the first. But I think the problems occurred when I tried to switch back and forth, to do some texting.
Is there a way I can accomplish this?
Thanks.

Until Windows 7, it was possible to use two identical PCs with same clone. Provided, both the PCs must be legally licensed to use the Windows operating system (version as well as edition) and of same OEM, model and spec. This is possible because, the product
keys are common for all the PCs of same OEM build (if preinstalled, and the installed product key is different from the one mentioned in COA). This made OEM builders to distribute to more PCs than the license agreement, which is impossible for Microsoft to
find out. To solve this issue, Microsoft changed the licensing structure from Windows 8 - embedding the product key in BIOS. So, here, only the installation is provided and the product keys are not common for all the PCs even if they are of the same OEM build.
Therefore, cloning fails here. And naturally, as Team Zigzag and EC Ltd say, same product key can't be used for more than one PC.
As to restore the PC in case of an emergency, you can perform a backup of the existing installed software and user files, which can be restored later (File History in Windows 8). The following links may be helpful:
http://windows.microsoft.com/en-us/windows-8/what-happened-to-backup-restore
http://blogs.technet.com/b/keithmayer/archive/2013/09/17/backup-amp-recovery-of-windows-8-windows8-itpro-tipoftheday.aspx#.UkC-hmLrbIU
Balaji Kundalam

HOW TO GENERATE FINITE AND CONTINUOUS PULSE TRAIN WITH USB6216 AT THE SAME TIME?

Hello.
I am using a USB6216 DAQ and need to generate a 20 kHz signal using the
ct0 output and at the same time I need to generate a finite number of
pulses, say 9, on a software trigger using the second counter output
ct1.
Currently, I have two VIs that can do this separately, but when I want
to integrate these into one single VI y get an error in the finite
pulse train for ct1 that indicates that the requested task is already
reserved. I am thinking this has to do with the fact that maybe both
types of task use the same timebase but I have not found the way to
solve this problem.
Any help would be very much appreciated.
Thank you.
Sincerely
JSL

Hello.
If anybody is interested, the problem is solved.
There is no resource confilct if I generate the 20 kHz continuous pulse
signal using the frequency out terminal, and this way I can use both of
my counters as I please with no problems.
It's kind of fun to answer one's own questions...
Sincerely
JSL

PO Intercompany with plant of the same society

Similar Messages

Maybe you are looking for