PO is getting released even if the total amount is less than the last PO am

Purchase Order is getting released even if the total amount is less than the last PO amount. The release strategy is only working for the first Purchase Order and if the PO amount is greater than the last PO amount.
Please let me know how to correct this scenario (release strategy).
Regards,
Prishu

Hi,
Release strategy has nothing do with the previous PO amount. May be, Co-incidently the amount in previous PO which you are referring and the characteristics value maintained in the release strategy is same.
1) Please go in release strategy by the path mentioned below
IMG u2013 Material Management u2013 Purchasing u2013 Purchase Requisition u2013 Release Procedure u2013 Procedure with Classification u2013 Set Up Procedure with Classification
2) Then go to release strategy. Here the total available release strategies would be displayed. Double click the strategy which is getting reflected in the PO you want and go the classifiction tab. There you will get the PO value. Based on this characteristic value the respective release streategy gets refelected.
I hope this clarifies.
Regards
sachin

Similar Messages

  • My 16 GB ipad says i have less than 1 GB of storage available. Yet when i add all the apps up, the total come to less than 9GB. i know the sytem need some but where is the rest of my storage being used?

    My 16 GB ipad says i have less than 1 GB of storage available. Yet when i add all the apps up, the total come to less than 9GB. i know the sytem needs some but where is the rest of my storage being used?

    Hi CPI Pierre,
    You can determine what is using the memory in your iPad Air by looking at Settings > General > Usage > Manage Storage.
    If you are having issues with insufficient memory you may want to troubleshoot using the steps in this article -
    iOS: "Not enough free space" alert when trying to sync - Apple Support
    Thanks for using Apple Support Communities.
    Best,
    Brett L 

  • Time machine won't back up since I have restored from time machine following hard drive replacement.  I am being told there is not enough space, however the back up is less than the hard drive size

    We recently had the hard drive replaced on our Mac as part of Apple's replacement programme.  Prior to sending it off for repair we did a final Time Machine back up, which was completed successfully.  SInce getting the computer back we restored everything from the backup disk using Time Machine, which all worked fine, however now we are having problems with it completing regular backups.  We receive a message each time telling up that the backup disk doesn't have enough space on it.  It is telling us that it needs in the region of 370gb and only has around 30gb available.  The computer hard drive is in the region of 350gb and the hard drive is a 400gb one.  It is almost as if it is not recognising that the data already on the disk is the back up of this computer and is trying to complete a completely separate back up as opposed to just updating the backup already on the disk.
    Has anyone else got any experience of this and therefore could give me some hints on what to do.  I am reluctant to wipe the backup drive and start again, however I would prefer not to have to buy another hard drive if I can avoid it as this one is technically big enough
    I look forward to getting some responses

    Hi, I never use TM myself.
    Have you looked through Pondini's extensive TM help site?
    http://Pondini.org/TM/FAQ.html
    http://pondini.org/TM/Troubleshooting.html
    Can't imaging something not being covered there.
    PS. It's generally recommended a TM drive be at least twice the size of your main drive.

  • I have a question about the new version of itunes. in the old version at the bottom of the sceen it display the total number of media and the size of the files. how can i get the new version to diplay this?

    in the old version at the bottom of the sceen it displayed the total number of media and the size of the files. how can i get the new version to diplay this?

    You're welcome. It was frustrating for me as well until I stumbled across "the fix"

  • Get the Total Amount Paid of an A/R Invoice

    Hi to All.,
    Im doing a Report where in i should show the total amount paid in an A/R Invoice
    But my Problem is i dont know what table to get it ..
    thx in advance ..

    Hi!
    Try my query here. I'm using this to get my AR Balance base on the date I enter.
    The table I use here were OITR and ITR1 (table of internal reconciliation).
    SELECT
    T0.DocNum,
    T0.DocDate,
    T0.DocTotal,
    isnull(T3.ReconSum,0) as 'Paid to Date',
    ((T0.[DocTotal]) -isnull(T3.reconsum,0)) Balance
    FROM OINV T0 
    LEFT OUTER JOIN (
    SELECT a1.[SrcObjTyp],sum(isnull(a1.[ReconSum],0)) as 'ReconSum',a1.[SrcObjAbs] from OITR a0 INNER JOIN ITR1 a1 ON a0.ReconNum = a1.ReconNum and (a0.ReconDate < [%0]) and a0.iscard='C'
    GROUP BY a1.[SrcObjTyp],a1.[SrcObjAbs]) T3 on T0.[ObjType]=T3.[SrcObjTyp] and  T0.Docentry=T3.[SrcObjAbs]
    where T0.DocDate < [%0] and T0.DocTotal >0
    Hope this helps!
    Regards,

  • HT1222 How do I increase the total amount of space I have on iPhone for things like iTunes n more music n like MusicTube n YouTube. Thank you in advance for any help that can be given.

    I am running out of usage space. How do I increase the total amount of space I have on my iPhone4S: for things like programs &amp; apps such as, iTunes &amp; more music &amp; like MusicTube &amp; YouTube. The only reason I have any space now is because the music that I had downloaded and synced onto my phone from iTunes I had to take it all off. I would really really love to be able to put my music back onto my iPhone. Currently I'm using apps like Spotify, AOLradio, and MusicTube to listen to music. Thank you so very much in advance for any help that may be given!

    Also to add to my original question: is what I'm asking even a possibility??? Meaning is there even a way to get more usage space? Or do I have to just continue to work within the confines that apple has preset on the phone?

  • Can't back-up new iMac with fusion HD.  The back-up proceeds to within 10% of the total storage needed and then the "of" number increases.  I suspect there is a problem with backing up the fusion drive.  We have a new 3 TB time Capsule.  Any ideas?

    Can't back-up new iMac with fusion HD.  The back-up proceeds to within 10% of the total storage needed and then the "of" number increases.  I suspect there is a problem with backing up the fusion drive.  We have a new 3 TB time Capsule.  I tried excluding different parts of the software from the back-up but it didn't make any difference.  I even tried exluding "invisible items" to no avail.  Any ideas?

    When you setup the wireless and ethernet in the computer.. ipv6 will be on automatic.. this is wrong for the latest TC firmware and airport utility. http://support.apple.com/kb/TS4597
    Go to the wireless and ethernet setup in preferences and change ipv6 to link local.
    Once you do the big backup by ethernet the wireless will function fine for incremental.. it is obviously not estimating the size correctly..
    A full back-up on the iMac would be about 650 GB.  The partial updates that I have been trying start out at 115MB and keep growing indefinitely.  The original back-up never finished nor have any of the follow-up attempts.
    The first estimate should be the full backup but it will keep growing as the backup advances.. I would also delete any inprogress files to make sure it is not messing up .. delete even a sparsebundle if there is one for the imac on the TC and start afresh once you have ethernet connection.
    See A10 here.
    Pondini may have some other clues there to give you an idea of why the backup is slow or not finishing.. there is a lot of issues with TM when it decides not to work.

  • Report to extract the total Amount that we spent for materials

    Hi Guru's,
    I was trying to find a report that gives all the following information by Company Code. Out put should have the following fields:
    1)Vendor Name,
    2) Vendor Number,
    3)Company Code,
    4) Payment Terms Code From Vendor Master,
    5) Payment Terms Description,
    6)Material Number,
    7)Material Description and
    8) Amount Spend for last 12 months
    I would appreciate any inputs on these kind of reports.
    Thanks
    Nath..........

    Sridhar,
    Thanks for your response but I am not getting Material number using report FBL1N and also I in the amount column I was looking for the total amount (total spent during the whole year) by Vendor, Company Code and Material. I am trying to execute this for three different company codes. So, will FBL1N work for us to get these total amounts.
    Thanks
    Nath

  • My measures for my tabular model don't display the totals any more next to the measure.

    In the lower measures grid in the Visual Studio IDE I no longer see my totals next to the measure itself. What caused them to go away and can I get them back?

    do you mean the total like on the screenshot below?
    It seems that the totals was use defined to calculate the total amount.

  • Just finished update. While in the Tips, why did it tell me I have an old version? Hey there! Looks like you're using an old version of Firefox. Don't miss out on the latest technology & security features. Get the free upgrade in less than a minute.

    The top of the screen has an owl like icon & then the following message:
    Hey there! Looks like you’re using an old version of Firefox.
    Don’t miss out on the latest technology & security features.
    Get the free upgrade in less than a minute.

    Dear Colbabomb; thankyou for your links.
    So far, I looked at your first solution, Revo Uninstaller and it gives you a 30 free trial. Ergo, it will eventually cost money so I'm leery of using those kinds of programs in general, meaning most "free trials" have unwanted strings attached and often are big probs to get rid of later. Perhaps you can assure me that it is easy and very user friendly, before I proceed. And I already ran malwarebytes and it found nothing tho the program still can't be uninstalled. I downloaded Adw Cleaner and during the install, my Norton's security popped up and warned that there were (low risk) threats with two of their "other offers" and i hadn't even actually clicked to agree either of them. Nonetheless, Norton warned me against the "lyrics finder" and "deal ply." In fact, there was a box already with an x in it, saying that you are accepting deal ply if you x on "next." Well, except I unchecked that box before clicking on next, yet when it went to fully install, it still showed that it was adding itself; so, just before the install was 100% completed, I had to abort the whole thing. I really do hope your other suggestions are programs that you personally know that they don't try and trick you. But right now, I would not suggest Adw Cleaner to anyone. I even read the fine print about what they will try and install and how to decline and it still tried sticking stuff on that i believed I had declined. Anyways, i have to leave now, shall pick up later this evening, if my pc is still functioning.

  • How to distribute a % of the total amount to a partner in a contract?

    Is there any way to distribute a % of the total amount to a partner, say a forwarding agent in a contract?
    Thanks & regards,
    Gokul.

    Play the video with Quicktime Player where the controls do not show when you use the space bar to stop the playing.  The forward and back keys will advance/retreat the video till you get the exact frame to make the screenshot of. 
    OT

  • Po list showing the total amount with advances given & open GR quantity

    Hi Gurus,
    My client need to know the list of total p/os showing its gross total amount only (& not with the line items) with the advances rendered to them & its open GR quantity against total qunatity mentioned.
    I hv tried in ME80FN, ME2N, ME2L ME2M..etc and all other reports but the system is showing the same with the line items. Kindly advise.
    Regds
    Prashant Bijutkar

    Prashant,
    All three informations will not be available in one report(gross total amount  not with the line items and the advances rendered to them & its open GR quantity against total qunatity mentioned).
    You have to dovelop this report. please take help from technical consultant.
    One more thing the open GR quantity will always at PO line item level not at header level.
    Regards,
    Manish

  • Display the total number of rows for the report in OBIEE 11g

    Hi, In obiee 11g, the pagination will be 1-25. Is there any possiblity in obiee to show the total rows count next to pagination. Ex: if the result contains 120 rows. it should display after the pagination
    Records 1-25. Total of Records : 120
    Is there any way we can display the total number of rows for the report.
    Kindly help me.. Its very urgent requirement.
    MAny Thank in advacne

    Check this http://obiee100.blogspot.com/2011/07/display-total-number-of-records-in.html
    and
    http://docs.oracle.com/cd/E28280_01/bi.1111/e10544/appsql.htm#CHDCDIDA
    You have to go something like as suggested in previous link.
    Mark as correct/helpful

  • I just downloaded itunes 11.. and now i cant find out how to display duplicates and also it doesnt show the total amount of songs in my library...anybody know..???

    I just downloaded itunes 11 and now i cant find the display duplicates..and it doesnt show the total amount of songs in my library..anybody know..??

    Two Windows scripts to make playlists of Duplicates and Exact Duplicates. Use shift-delete to remove selected tracks from the library as well as the playlist.
    There is also my DeDuper script if you don't want to do it by hand. Please take note of the warning to backup your library before deduping. See this thread for background.
    tt2

  • PO Condition type to be included in the total amount of PO

    Hi,
    I have a PO conditiont type configured with the ff. attributes:
    1. Condition Class is Discount or surcharge.
    2. Calculation type is percentage.
    3. Cond. category is delivery costs.
    I want to include the additional cost of this condition in the total amount of the PO. How will I configure the condition type to behave this way?

    Hi,
    Go to SPRO- MM - Purchasing - Conditions - Define Price determination Process - Define calculation schema
    Select the pricing procedure and go to the control data add the new condition type that you have configured as an additional step in the pricing procedure before the total amount.
    Regards
    Merwyn

Maybe you are looking for

  • DVD drive not recognized after Security update

    Hello - Well, for whatever reason I decided to apply some Apple software updates today. I repaired permissions, did a back up to an external Firewire drive with SuperDuper and downloaded several packages - iDVD 6.0.2, iMovie 6.0.2, Quicktime 7.1, iPh

  • Adding a route in solaris

    I added a route in solaris by command--> route add 10.224.86.10 -netmask 255.255.255.224 10.224.8.10 it gave the prompt--add net 10.224.56.0: gateway 10.224.8.10 I checked the routing table by netstat -r 10.224.86.10 10.224.8.10 UG 1 0 which shows th

  • Dynamically add Children Link Element

    Hi, I'm trying to dynamically add a children element, a link, but the action binding refuses to work ... I've created a custom jsf component, that does nothing at all. For example, one would use it like: <my:nothing></my:nothing>So my UI class would

  • Retrieving tags and corresponding text within textFrame

    I have a text frame that looks like this: starting with a reference to the pageitem, I want to be able to get a list of the tag names and the text that corresponde to them. In this example the red tag is "text1" the green tag is "text2" and the blue

  • Rented film not appearing

    Apple TV can see router OK, signal strength good. Homesharing turned on.  Re started and re-configured.  The tick Box for Apple TV has disappeared.