PO is not getting create in ECC

Hi ,
    I am in SRM 7.0 SP 3.0 and ECC.. I have developed the custom BRF for Category approver and activated Standard Role Resolver 'RR_SPENDING_LIMIT_APPROVER' for SLAPPROVER which is working fine. . But i am facing an issue that once SC has been fully approved but the PO is not getting transfer into ECC. When I check BBP_PD for the SC the status I can see the below status
HEADER     I1015          Awaiting Approval              X
HEADER     I1021          Created
HEADER     I1038          Complete
HEADER     I1106          Shopping cart ordered
HEADER     I1129          Approved
But when I execute the FM 'BBP_PD_SC_TRANSFER_INTERNAL' manually with the SC GUID I got the error message as
Exception       SYSTEM_FAILURE
Message ID:          BBP_PD                     Message number:           507
Message:
No links corresponding to the specified data could be determined..
I check the BBP_PD After executing the FM 'BBP_PD_SC_TRANSFER_INTERNAL' manually with the SC GUID . The status has been moved to next status..
HEADER     I1015          Awaiting Approval              X
HEADER     I1021          Created
HEADER     I1038          Complete
HEADER     I1106          Shopping cart ordered
HEADER     I1129          Approved
0000000001 I1111          Item in Transfer Process
at this stage I execute the report program 'BBP_GET_STATUS_2' to get the status. but I got the following error
         No Shopping Cart (REQUIREMENTS) Found with Status =  Transferred
        Batch program for updating status information for SCs as of Rel. 3.0
         On the basis of the data, no changes possible
        The following RFC destinations were called:
         RFC Destination:                   Call result:
In order to create PO what are configure steps I have to perform..
Regards,
Jr.SRM

Dear Elham,
To find the solution of the problem I think you need to debug.
Follow below steps if this help you
a) Run the report "FBGENDAT"
b) Input the data as below screen shot
c) Then go to se37 execute FM : BAPI_PO_CREATE1
d) You will find the test data directory and test data will be saved as below
e) In this test date change PO number you should get the error which you are getting above.
Thanks
Ankit Jain

Similar Messages

  • SRM PR is not getting created in ECC backend

    Hello Experts,
    We are running SRM 7.0 with SRM-MDM Catalog, we are using SRM for shopping.  We do have PI 7.11 running in the Environment as well.
    We are on ECC 6.0 with Ehp 4.0
    Purchase Order:
    However we can see the PO creating successfully using PI.
    Question, in the SRM table (BBP_FUNCTION_MAP), we see the object type: BUS2012 for ERP 4.0 has adapter name: /SAPSRM/CL_SOA_ADPT_PO_CRT_ERP for when creating PO. Please see teh screen shot.
    is this the reason that we need PI?
    Purchase Requisition:
    PR Creation is not working:
    PR is not getting created in the ERP, PR uses Object type: BUS2105, Adpater CL_BBP_BS_ADAPTER_RQ_CRT_470 for ERP 4.0 System type, can you please tell me if the adapter is correct for ERP 4.0 system type?
    I also have a question to ask:
    1) Where did you see that PR/PO was send to PI System (PI1)? My understanding is that since ERP amd SRM are 2 ABAP Systems, why we cannot send the PR/PO directly to ERP system from SRM? Why do we need a middleware(PI) in between for this process? We should be able to USE BAPI function to do it correct?
    Please advice.
    Thanks
    Kumar

    yes, i could see a PR number with all this additional details as below.
    Table   BBP_PDBEI
    CLIENT                       453                                                              Client
    GUID                         4CAEFA58EB9D005CE1008000AC1C2031                                 Globally Unique identifier
    BE_LOG_SYSTEM                QA1400                                                           Logical System of Logistics Backend
    BE_OBJ_ITEM                                                                                Follow-On Object Item in Back-End System
    BE_OBJECT_TYPE               BUS2105                                                          Follow-On Document Object Type in Back-End System
    BE_OBJECT_ID                 2000000167                                                       Follow-On Document Object ID in Back-End System
    BE_REFOBJ_TYPE                                                                                Reference Object Type in Back-End System
    BE_REFOBJ                                                                                Reference Object in Back-End System
    BE_REFOBJ_ITEM                                                                                Reference Object Item in Back-End System
    BE_REFOBJ_SBITM                                                                               Reference Object Sub-Position in Backend System
    BE_REFOBJ_TYPE2                                                                               Reference Object Type in Back-End System
    BE_REFOBJ2                                                                                Reference Object in Back-End System
    BE_REFOBJ_ITEM2                                                                               Reference Object Item in Back-End System
    BE_REFOBJ_FYEAR2             0000                                                             Reference Document Object - Fiscal Year in Back-End System
    BE_STGE_LOC                                                                                Storage location
    BE_PLANT                     2016                                                             Plant
    BE_BATCH                                                                                Batch Number
    BE_VAL_TYPE                                                                                Valuation type
    BE_MOVE_REAS                 0000                                                             Reason for Movement
    BE_EXPERYDATE                00000000                                                         Shelf Life Expiration Date
    BE_PUR_GROUP                 206                                                              Purchasing group
    BE_PUR_ORG                   2000                                                             Purchasing organization
    BE_CO_CODE                   2000                                                             Company Code
    BE_DOC_TYPE                  CLRQ                                                             Purchase Requisition Document Type
    BE_ACCREQUIRED                                                                                Account Assignment for Logical Backend Required
    BE_SP_STK_IND                                                                                Key for Special Stock Section
    BE_INFO_REC                                                                                Number of purchasing info record
    BE_MOVE_TYPE                 201                                                              Movement type (inventory management)
    BE_PACKNO                    0000000000                                                       Package number
    BE_INTROW                    0000000000                                                       Internal line number for limits
    BE_ITEM_TEXT                                                                                Short Text of a Service Purchase Order Item
    BE_PO_PRICE                  1                                                                Price from Backend
    BE_UNLOAD_PT                 200                                                              Unloading Point in Backend
    BE_DEL_IND                                                                                Deletion Indicator in Backend Documents
    BE_TRACKING_NO                                                                                Requirement Tracking Number
    BE_COND_TYPE                                                                                Condition Key
    BE_COND_STEP                 000                                                              Level Number
    BE_COND_COUNTER              00                                                               Condition counter

  • WBS Elements not getting created in ECC Project System from CRM 7.0

    Dear all,
    We are trying to integrate SAP CRM 7.0 with SAP ECC-PS module. The objective is to bring in the marketing plan and elements data from the CRM system, and to create the corresponding WBS in project system. We have done most of the configuration as recommended by SAP in both the systems, and we see that the BDOCS are getting generated and sent to the ECC system. The following steps have been successfully completed:
    1.       Set up the RFC connections between the two systems
    2.       Selected the connection type as Middleware in CRM system.
    3.       Installed the cProject Add on in CRM box.
    4.       Created a project scenario (with project and network profiles) in the PS system and assigned the same in the CRM system.
    5.       The Project Scenario in PS config has the same name as the Project Type in CRM config.
    6.       Created and released the campaign ids being created in the CRM system.
    As already mentioned, we can see that the BDOCS are coming to the ECC system and are getting stored in BDOC_TRACK table. However the issue is that the corresponding WBS elements are not getting generated in the ECC system. Is there anything that that we are missing in the ECC box which would trigger the WBS element creation?
    Request you all to share your inputs which would be immensely beneficial for us in achieving this integration.
    Thanks and Kind Regards,
    Aditya Shrivastava

    Hello Aditya,
    We too are facing this issue.. if you have resolved the issue could you please let us know the solution ?
    Some inputs related to our system,
    We have upgrade from CRM 4.0 to CRM 7.0 SP07 and R/3 backend system is on 4.7 SP27, earlier we have completed the upgrade on sandbox without any issues which was upgrade to CRM 7.0 SP04 but with SP07 we are facing the problem of WBS Element not getting created in R/3.
    Your help is highly appreciated.
    Thanks & Regards,
    Sumukh Kapoor.

  • Invoice not getting created in ECC 6.0

    SRM Classic Scenario 5.0 and ECC 6.0 as backend. ECC6.0 is where all purchase documents are created
    Started invoice posting from SRM and it gets posted in ECC 6.0. Our FI data is maintained in ECC.
    When we are trying to create Invoice from SRM and IDoc is seen in ECC and IDoc is in 'Error' status.
    Debug was run
    We have couple of messages from BD87
            --  Reversal quantity greater than quantity invoiced to date (M8080)
            --  Cash discount amount cannot be posted.(M8845)
    Can it be related to credit/debit indicator?
    Can you please let me know from an FI standpoint if we are missing any configuration on the ECC side. Its SRM Classic Scenario with 5.0, Server5.5 and ECC 6.0 ? I checked the Goods Movement type of 201 and it has a Indicator of H (Credit). We use this movement type in SRM as well.
    Please advise. Thanks for your time.

    Hi,
    Supposed to install GERMAN Language while installing the Solaris OS. As we have missed it, SAP could not interpret the German Characters properly and thus the "Mysterious Characters error occured".
    After installing the German Language, the problem was rectified and we were able to release the transports without any errors.
    Thanks for the help.
    L Raghunahth.

  • SRM PR,PO is not getting created in ECC backend

    HI
    i create SC in classic scenario. and after the manager approve the SC the follow on Doc didnt create in ECC
    i define object for po pr and reserve in backend
    when i check FM :BBP_PD_SC_CHECK i havent any error message
    but when i have chek the SC in RZ20 i have this error: Local Error: Shopping cart 0010000308: Error creating the follow-on document
    and when i chek BBP_PD i have this status:
    Stats:
               Status         Description                    Inactiv
    HEADER     I1015          Awaiting Approval              X
    HEADER     I1021          Created
    HEADER     I1038          Complete
    HEADER     I1106          Shopping cart ordered
    HEADER     I1129          Approved
    how to resolve this issue?
    Regards
    Elham

    Dear Elham,
    To find the solution of the problem I think you need to debug.
    Follow below steps if this help you
    a) Run the report "FBGENDAT"
    b) Input the data as below screen shot
    c) Then go to se37 execute FM : BAPI_PO_CREATE1
    d) You will find the test data directory and test data will be saved as below
    e) In this test date change PO number you should get the error which you are getting above.
    Thanks
    Ankit Jain

  • PPM not getting created when ECC Production version is changed

    Hi,
    We are facing a problem with PPMs.
    We changed the Production version in ECC for the corresponding Material in ECC from 5000 to 6000.
    We then ran the RSPPMCHG and then generated and activated the PPM Integration Model.
    No queues inbound (APO) or Outbound (APO) were blocked. \
    The result was that the 5000 PPM was deactivated in APO but we could not find the 6000 PPM version anywhere.
    Can anyone please help??
    Regards
    Abhishek Sahi

    Hi,
    Refer notes 448085 PPM Transfer: Tips and Tricks
    Aslo after generating and Activating the IM, run the report  RSPPMCHG ( Tcode - CFP3)
    Thanks,
    nandha
    Edited by: S.Nandakumar on Oct 8, 2010 10:05 AM

  • Delta record not getting created

    Hello Experts -
    I'm working with 0mat_plant_attr datasource.
    In ECC, I made changes to some materials in MM02. I changed the values of MRP Type and Rounding Value in MRP1 tab. The data is saved correctly but a delta record is not getting created. In RSA7, no records are there for 0mat_plant_attr. MRP Type, Rounding Values are attributes of 0mat_plant. I did run the initial infopackage from BW to enable the delta.
    Can someone please help me with this? I'm not doing something correctly.
    Thanks!

    Hi Syed,
    I think you may have to run an attribute change run after executing your infopackage to see the changes.  The modified attribute needs to be set as active in by the attribute change run.
    Master data & attribute chage run
    Regards,
    John

  • Method is not getting created in sproxy

    Hii,
      I have created proxy for OutBound Asynchrous Message Interface in sproxy. After activating the object. When I see in the class, Execute_asynchrous Method is not getting created.
    What could be the problem?
    Any help would be appreciated.
    Regards,
    Varun

    Hi,
    Since ECC 6.0 version, EXECUTE_ASYNCHRONOUS methos and EXECUTE_SYNCHRONOUS methods are not generated with that names.
    Instead, The same name of your message interface is created as a method.
    Carlos

  • Integration with EWM-Inspection lot not getting created

    Hi,
    Inspection lot not getting created after GR is done.
    The scenario is Storage location is connected to external warehouse management,so after the GR is done in the legacy system via interface it is updated in ECC.so while checking the material document inpection lot is not created.
    Can anyone please tell me the necesaary check points and integeration steps  between WM and QM in this case .
    Thanks in advance.......

    Hi,
    Since you didn't say much, I assume you are creating stock into ECC via LSMW using 561 movement. Now to get inspection lot for these batches/ docs, you need to activate inspection type 05.
    Go to material master QM view, assign and activate inspection type 05.
    Additionally, create a respective inspection plan/ task list for the material(s) to carry out RR and get the consistent inspection lots.
    ntn

  • CRM Sales Order Not getting transfer to ECC System

    Hi,
    We had created one sale order in CRM and created sale order is not getting transfer to ECC system. BDOC are ending into error status and following are the error which is getting generated
    ERP adapter is called
    item is not to invoice0000000010
    Service that caused the error: CRM_1O_DELTA_MOB_MBDOC_SRV
    We had cross check the item category in CRM and ECC system and it seem to be fine.
    We had tried opening the document and it is gettinh opened suceesfully also.
    In case if any one had face this issue then please let me know the solution step to get this issue resolved.
    With Regards
    Ankush Rai
    9423404043

    Hi Anukush,
    To replicate a sales order from CRM to ECC you should have following prerequisties.
    1. Master Data: Customer, material should exist in both the system
    2.Organization Structure like Sales Org, Division, Distribution Channel (Sales Area) should exist in both the system
    3.Same Document Type,Item Category, Item Category Determination should exist in both the system
    4.Same Number Range should exist in both the system
    Best Regards,
    Rajendra Sonawane

  • Integration with QM-Inspection lot not getting creating

    Hi ,
    Inspection lot is not getting created after GR is posted.
    Scenario:Storage location is connected to external warehouse management.
    Can anyone please explain the necessary check points and  Integration steps needed to be followed for inspection lot creation.

    Hi,
    Since you didn't say much, I assume you are creating stock into ECC via LSMW using 561 movement. Now to get inspection lot for these batches/ docs, you need to activate inspection type 05.
    Go to material master QM view, assign and activate inspection type 05.
    Additionally, create a respective inspection plan/ task list for the material(s) to carry out RR and get the consistent inspection lots.
    ntn

  • Excise invoice should not get created without PGI

    Hi,
    I have a scenario where the billing document is being generated by the customer without PGI after creation of outbound delivery for exports. (This is as per customer's requirement - Copy control maintained in VTFL for the same - copying requirements 11 )
    This creates a situation - excise invoice can be created without PGI - which creates problems for customer. This should not happen.
    Customer wants a check during the excise invoice creation - excise invoice should not get created if PGI has not been done.
    Kindly advise as to how this can be done.
    Regards,
    T Saravanan

    Dear Saravanan
    Two options are there
    -  in your existing routine itself, you can specify the control in such a way that unless the preceding document is PGId
    -  apply excise user exits like J_1I7_USEREXIT_EXCISE_BEF_SAVE to achieve the requirement.
    thanks
    G. Lakshmipathi

  • Invoice is not getting created in Order related billing

    Dear all,
    I am trying to do a Order related billing. After creating the order i am going to VF01 and selecting the billing type i have created and trying to create the invoice. I am getting the error "No billing documents were generated. See log" when i am checking the Log its showing now errors.
    In case if my account determination procedure is wrong, system should allow me to create a Sales invoice and accounting document will not be generated. But in this case even the sales invoice is also not getting created.
    Please suggest me if there are any configuration changes i need to do to overcome this problem.

    Apart from the suggestion already given, also ensure that
    the order is not showing in incomplete log
    the order is not blocked for credit limit
    You can also cross check in VF04 whether system is fetching that sale order.  For information, once you execute VF04, by default, system will check only "Delivery related" check box.  You have to manually select "Order related" check box.
    G. Lakshmipathi

  • File not getting created in a different server

    My requirement.
    I have written a code in the BI system and now need to write an empty file (say a.done)in a directory /interfaces of PI system.
    I wrote using open data set and close data set however the file (a.done) is not getting created in the PI system even though the directory /interfaces exist.
    When I give any directory of that of BI system ,the file(a.done) is getting created i.e the file is getting created on the same server and not on the different server.
    Is there any function module or any other way for the file to get generated in the PI system.
    Please explain with an example.
    Regards,
    Vish

    Try to use  search FTP in se37 or checkout the below FM
    CALL FUNCTION 'EPS_FTP_MPUT'
      EXPORTING
        RFC_DESTINATION            =
    *   FILE_MASK                  = ' '
    *   LOCAL_DIRECTORY            = ' '
    *   REMOTE_DIRECTORY           = ' '
    *   OVERWRITE_MODE             = ' '
    *   TEXT_MODE                  = ' '
    *   TRANSMISSION_MONITOR       = 'X'
    *   RECORDS_PER_TRANSFER       = 10
    *   MONITOR_TITLE              =
    *   MONITOR_TEXT1              =
    *   MONITOR_TEXT2              =
    *   PROGRESS_TEXT              =
    * IMPORTING
    *   LOCAL_DIRECTORY            =
    *   REMOTE_DIRECTORY           =
    *   LOCAL_SYSTEM_INFO          =
    *   REMOTE_SYSTEM_INFO         =
    * TABLES
    *   FILE_LIST                  =
    * EXCEPTIONS
    *   CONNECTION_FAILED          = 1
    *   INVALID_VERSION            = 2
    *   INVALID_ARGUMENTS          = 3
    *   GET_DIR_LIST_FAILED        = 4
    *   FILE_TRANSFER_FAILED       = 5
    *   STOPPED_BY_USER            = 6
    *   OTHERS                     = 7
    IF SY-SUBRC <> 0.
    * Implement suitable error handling here
    ENDIF.

  • Weblogic Domain not getting created in SOA Suite 11g R2

    I have installed the components of SOA Suite 11g R2 (11.1.1.3) on a single Windows XP SP3 machine (32 bit) following recommended procedures. I tried to configure Weblogic server using Domain Configuration utility. After navigating hrough the wizard, no Weblogic server profile is getting created in the doamin folder. Even the WL Admin server is not getting created. The Domain Configuration utility did not throw any errors.
    1) Is this problem related to Oracle repository for SOA suite 11g?
    2) Can the repository schemas (Oracle) hold multiple weblogic SOA domain information?

    Hi,
    Weblogic servers directory do not gets created after domain creation or even managed server configuration. It will present itself only when you start the managed server for the first time, that is when it initializes all security attributes, diagnostic attributes (if configured) , etc..
    Perform server start and then check if it gets created or not.
    ## rank answer if it is helpful ##
    Thanks,
    Ranjan

Maybe you are looking for