PO is not getting released from SRM

Dear Experts,
I am configuring SRM-SUS Scenario on SRM 7.0. I have set up all SRM, XI and SUS cofiguration.
(SRM - SHDCLNT901, XI - XHDCLNT500, SUS- SHDCLNT951)
Shopping Cart and PO is creating fine but PO is not tranferring from SRM to SUS.
when i checked SXMB_MONI in SRM, there is no messeges showing there. It means PO is not getting released from SRM.
Kindly let me know is there any t-code for enable communication between SRM and SUS?
I have correctly configured XI and also transferred vendors from SRM to SUS through SupplierPortalTradingPartner_CreateOrChange_Out messege type  but
PurchaseOrderRequest_Out  for PO transfer is not  getting triggered in sxmb_moni in SRM.
Thanks in advance.
Regards,
Pawan Keshwani

Hi,
Thanks for your reply.
I have configured  Application Control Workflow correctly ( I am using Workflow without approvals for PO (BUS2201))
And in Rz20, I am getting below messege ("SHD : MTE class BBP_PO , Client 901 : No MTEs currently available*) for PO in Rz20 given below path
(CCMS  monitor sets -> SAP (CEN) EnterpriseBuyer Monitors -> Purchase Order)
I am configured ESOA Architecture in XI  for SRM-SUS , and my root issue is " I am not able to generate XML messeges in SRM".
Not getting any messege in SXMB_MONI in SRM.
Regards,
Pawan Keshwani

Similar Messages

  • Data not getting transffered from SRM system to BW

    Hi All,
    We have an issue where in the data is not getting transferred from SRM to BW. If i see in RSA 3 of SRM system, the datasource is pulling around 3000 records and in WE02, the idoc is generated and passed without any errors.
    Whereas in BW the idoc is coming with code 8 and no data is getting transferred to BW.
    What can be the probable reasons for this mismatch ??
    Thanks
    Abhi

    Hi Abhi,
    After an upgrade, i would go for following checks
    1. Check the Data Source on CRM side and check if it is Active.
    2. With Upgrade, usually DataSources become inactive and also, pls check if any required fields are hidden in the data source before you activate.
    3. After unhiding required fields, i would activate the Data Source and Replicate the Data Source on BI Side.
    4. Now I would delete the failed request by forcing its status to RED in RSMO and then go for the load.
    Let me know if it worked.

  • Shopping cart not getting released from sourcing cockpit

    Hi,
      Am trying to release a shopping cart  from sourcing, but it's not getting released. Mentioned below are the methods I've tried and area'a which I verified for possible error. The major challenge is it's not throwing any error message. Your inputs & guidance are really helpful & appreciated.
    - Moved the SC to workarea in sourcing cockpit and tried creating PO - Failed w/o any error.
    - Verified in backend BBP_PD - No error message
    - verified in rz20 - No error message.
    - Attributes used in SC - Verfied all the major values such as Vendor, account assignment, basic data etc - No issues.
    - Tried creating PO creation in backend w/o posting it - able to create PO with same data.
    Thanks & Regards
    Aswini

    Hi
    Check it up any errors in the web application  monitor. you must get some error message..
    update us what was the error message. did you assign the vendor before you create a vendor in the sourcing cockpit?
    are sc again goes back to worklist?
    regards
    Muthu

  • Baseline date not getting populated from SRM invoices posted to ECC 6.0

    Hi,
    We are currently in ECC 6.0. The SRM system is in 4.0. We have this particular problem that the baseline date is not getting populated from the Invoices posted from the SRM. The baseline date is blank and the document is saved.
    Did anyone face the same problem??? Can you please refer SAP note 541934 and expand........
    Thanks
    Aravind
    Edited by: Aitipamula Aravind on Aug 10, 2009 5:13 AM

    Hello,
    Yes, you could check the attached note 541934 and regard the implementation of the field ZFBDT in the invoicing document.
    Note 541934 provides a solution how to achieve the MM-customizing for payment baseline dates getting effective for invoices with SRM-origin. This note needs to be applied at your ERP-MM-side in the former plug-in-layer. As described in the note, this is a modification. It's recommended to apply in non-productive system first.
    Hope the above infor.are helps for you!
    Best Regards,
    Gladys xing

  • XML PO is getting released from SRM only when Repeat Output is performed

    Dear Experts,
    Extended Classic Scenario(SRM-XI-SUS) inwhich SRM and SUS have on same SRM Server 7.0 but with differentt clients.
    XML communication is being happened between SRM and SUS.
    PO is created and ordered from SRM but it is releasing to SUS only when Purchaser in portal  is performed  Repeat Output manually or can say "Process for  BBP_PO_SEND_XML Is Started" only when we click Repeat Output button by purchaser in portal login.
    Replicating Steps :
    1. Create shopping cart by Employee, Approve by Manager and PO is created(for say : 21111).
    2. Open PO (21111) by Purchaser Login.
    3. Go to Header Tab then Output sub tab.
    4. Then i have to click Repeat Output button then only "Processing BBP_PO_SEND_XML Badi Is Started"  otherwise not.
    Thanks in advance.
    Regards,
    Pawan Keshwani

    Hi,
    Thanks for your reply.
    I have configured  Application Control Workflow correctly ( I am using Workflow without approvals for PO (BUS2201))
    And in Rz20, I am getting below messege ("SHD : MTE class BBP_PO , Client 901 : No MTEs currently available*) for PO in Rz20 given below path
    (CCMS  monitor sets -> SAP (CEN) EnterpriseBuyer Monitors -> Purchase Order)
    I am configured ESOA Architecture in XI  for SRM-SUS , and my root issue is " I am not able to generate XML messeges in SRM".
    Not getting any messege in SXMB_MONI in SRM.
    Regards,
    Pawan Keshwani

  • Standard PO workflow giving error due to Release coe is not getting passed from event

    Hi Team,
    I am getting the below error while processing the Standard workflow for PO.
    I think its due to the Release code is not getting passed from Event to workflow.
    Can you please sugest from where the release code is getting fetched before triggering the event.
    Error processing following event linkage:
    BUS2012 RELEASESTEPCREATED WS20000075
    Following error occurred:
    SWF_RUN 594
    Message text:
    Import container contains errors (are any obligatory elements missing?)
    Event container appended as attachment.
    Event linkage not changed.
    Event stored temporarily.
    Events can be redelivered via event queue
    administration (transaction SWEQADM)

    Hi 
    Please check threads, response by Fernando Carames, ( Jul 19, 2007 2:37 PM): http://scn.sap.com/thread/483005
    Or by Trevor Ticehurst  on Oct 9, 2008 3:39 PM at:  http://scn.sap.com/thread/1080411
    OR
    http://www.sapfans.com/forums/viewtopic.php?f=26&t=297786
    All these mention certian notes which may be helpful.
    However, it is important to first ensure that the release startegy is configured and working properly (check with your MM con)
    regards,
    Modak

  • Billing Document not getting release to Accounting. (VF01 and VF04).

    Dear All,
    I am facing an Urgent Issue. The User is Generating Invoices using VF01 and VF04. The Invoices is getting generated but not getting released to Accounting.  When the User goes in VF02 or in VFX3 and then releasing the Billing Document. The Account Detemination is correctly maintained and G/L is also getting determined.
    Please could you advice what may the Issue. Your Urgent Help is appreciated.
    Thanks.
    Farhan.

    Dear Alan,
    Yes I got the error message by pressing SHIFT + F4. Invoice Generated but no Accounting Document Getting Generated. A Balance has occured in Transaction Currency AED with the following details.
    Technical data
         Tech. data details
          Client
          Group Number
          Sales Document Number                  0004803850
          Item Number of the SD Document         000000
          Schedule Line Number                   0050
          Counter in Control Tables              00
          Message Identification                 VF
          System Message Number                  050
          Output Type                            W
          Message Variable 01                    0004803850
          Message Variable 02
          Message Variable 03
          Message Variable 04
    Detail
    Diagnosis
         A balance has occurred in transaction currency 'AED' with
         the following details:
         Exchange rate '00', amount '         8,600.00-' and
         currency key 'AED'.
         The data in the transaction currency were transferred from
         the calling application.
    System response
         Your data cannot be processed in FI.
    Procedure
         The error is probably in the calling application.
    nical data
    Tech. data details
    Client
    Group Number
    Sales Document Number                  0004803850
    Item Number of the SD Document         000000
    Schedule Line Number                   0702
    Counter in Control Tables              00
    Message Identification                 F5
    System Message Number                  702
    Output Type                            E
    Message Variable 01                    00
    Message Variable 02                             8,600.00-
    Message Variable 03                    AED
    Message Variable 04
    Group Type
          Group Type
    Same error I am getting when I am releasing the Billing Document to Accounting in VFX3.
    But When I generate the Invoice using VF01 its getting released to Accounting.
    Please advice why the Issue is only coming in VF04 Collective Invoice and in VFX3.
    Your Urgent Help is appreciated.
    Thanks,
    Farhan.

  • Dispatcher yellow,J2EE status info unavailable,Could not get file from DB

    Hello Experts,
    I have successfully installed a ECC 6.0 server-ABAP +JAVA  system (DB2 v9.5 FP4 windows server 2008-x64 bit).
    Kernel: 700 , Patch: 185 ; SP level : rel 700 , level 17
    I upgraded JSPM sucessfully from 14 to 17.Then i was trying to apply JAVA sp's one by one using single sp option JSPM tool.
    I DEPLOYED the first sp component sucesfully but after that the next component gave warning in JSPM check that SDM is not started.
    I checked MMC.Dispatcher was YELLOW and J2EE status info unavailable. Cannot use JCMON to start SDM..option 20 gives error--cannot access shared memory
    I already tried Notes   784568 and 997510
    Relevant logs:-
    jvm_bootstrap.out
    =================================================================================================
    Error synchronizing file [.\..\os_libs\FontManagerService_native.zip].
    com.sap.engine.frame.core.configuration.InvalidPersistentDataStreamException: Could not get file from DB.
    Attempt to fully materialize lob data that is too large for the JVM.
    Disable data source property "fullyMaterializeLobData" for locator-based lob implementation. ERRORCODE=-4499, SQLSTATE=null ERRORCODE=-4499, SQLSTATE=null
    Exception occurred:
    com.sap.engine.bootstrap.SynchronizationException: Unable to synchronize native files for instance [ID140026]!
    ==============================================================================================
    dev_jcontrol
    =============================================================================================
    Thr 4360] *** ERROR => JsfOpenShm: FtInit(SESSION, 2, 176) failed (got (rc = 0 operation successful), expected (rc = 8 already initialized)) [jsfxxshm.c   913]
    [Thr 4360] *** ERROR => Can't create shared memory segment 69 (rc = 1) [jcntrxx.c    1749]
    [Thr 4360] *** ERROR => Can't initialize JControl Administration [jcntrxx.c    273]
    [Thr 4360] JControlCloseProgram: started (exitcode = -1)
    [Thr 4360] *** ERROR => JsfCloseShm: FiDetachIndex(SESSION) failed (rc = 6 invalid argument) [jsfxxshm.c   1243]
    [Thr 4360] *** ERROR => JsfCloseShm: FiDetachIndex(ALIAS) failed (rc = 6 invalid argument) [jsfxxshm.c   1250]
    [Thr 4360] *** ERROR => JsfCloseShm: FiDetachIndex(SERVICE) failed (rc = 6 invalid argument) [jsfxxshm.c   1257]
    =================================================================================================
    log_bootstrap_ID0140026.0
    ==========================================================================================
    Error synchronizing file [.\..\os_libs\FontManagerService_native.zip].
    com.sap.engine.frame.core.configuration.InvalidPersistentDataStreamException: Could not get file from DB.
    ============================================================================================
    Eagerly looking forward to a solution from you experts..
    Thanks,
    Rakesh

    Hi,
    I am facing the same related problem with ECC 6.0.
    My dispatcher started it is showing yellow-  dialog queue standstill, J2EE status info unavailable
    after some time dispatcher has stopped.
    Please check my below trace file for dispatcher:
    trc file: "dev_disp", trc level: 1, release: "700"
    sysno      03
    sid        DEV
    systemid   560 (PC with Windows NT)
    relno      7000
    patchlevel 0
    patchno    114
    intno      20050900
    make:      multithreaded, Unicode, optimized
    pid        13108
    Fri Nov 27 02:31:55 2009
    kernel runs with dp version 229000(ext=109000) (@(#) DPLIB-INT-VERSION-229000-UC)
    length of sys_adm_ext is 576 bytes
    SWITCH TRC-HIDE on ***
    ***LOG Q00=> DpSapEnvInit, DPStart (03 13108) [dpxxdisp.c   1239]
         shared lib "dw_xml.dll" version 114 successfully loaded
         shared lib "dw_xtc.dll" version 114 successfully loaded
         shared lib "dw_stl.dll" version 114 successfully loaded
         shared lib "dw_gui.dll" version 114 successfully loaded
         shared lib "dw_mdm.dll" version 114 successfully loaded
    rdisp/softcancel_sequence :  -> 0,5,-1
    use internal message server connection to port 3903
    Fri Nov 27 02:31:59 2009
    WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 4 seconds
    ***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c  5361]
    MtxInit: 30000 0 0
    DpSysAdmExtInit: ABAP is active
    DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
    DpIPCInit2: start server >sapdev_DEV_03                           <
    DpShMCreate: sizeof(wp_adm)          15800     (1436)
    DpShMCreate: sizeof(tm_adm)          4232256     (21056)
    DpShMCreate: sizeof(wp_ca_adm)          24000     (80)
    DpShMCreate: sizeof(appc_ca_adm)     8000     (80)
    DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528056/528064
    DpShMCreate: sizeof(comm_adm)          528064     (1048)
    DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
    DpShMCreate: sizeof(slock_adm)          0     (96)
    DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
    DpShMCreate: sizeof(file_adm)          0     (72)
    DpShMCreate: sizeof(vmc_adm)          0     (1536)
    DpShMCreate: sizeof(wall_adm)          (38456/34360/64/184)
    DpShMCreate: sizeof(gw_adm)     48
    DpShMCreate: SHM_DP_ADM_KEY          (addr: 08290040, size: 4889440)
    DpShMCreate: allocated sys_adm at 08290040
    DpShMCreate: allocated wp_adm at 08292090
    DpShMCreate: allocated tm_adm_list at 08295E48
    DpShMCreate: allocated tm_adm at 08295E78
    DpShMCreate: allocated wp_ca_adm at 0869F2B8
    DpShMCreate: allocated appc_ca_adm at 086A5078
    DpShMCreate: allocated comm_adm at 086A6FB8
    DpShMCreate: system runs without slock table
    DpShMCreate: system runs without file table
    DpShMCreate: allocated vmc_adm_list at 08727E78
    DpShMCreate: allocated gw_adm at 08727EB8
    DpShMCreate: system runs without vmc_adm
    DpShMCreate: allocated ca_info at 08727EE8
    DpShMCreate: allocated wall_adm at 08727EF0
    MBUF state OFF
    DpCommInitTable: init table for 500 entries
    Fri Nov 27 02:32:00 2009
    EmInit: MmSetImplementation( 2 ).
    MM global diagnostic options set: 0
    <ES> client 0 initializing ....
    <ES> InitFreeList
    <ES> block size is 1024 kByte.
    Using implementation view
    <EsNT> Using memory model view.
    <EsNT> Memory Reset disabled as NT default
    <ES> 1023 blocks reserved for free list.
    ES initialized.
    J2EE server info
      start = TRUE
      state = STARTED
      pid = 13356
      argv[0] = D:\usr\sap\DEV\DVEBMGS03\exe\jcontrol.EXE
      argv[1] = D:\usr\sap\DEV\DVEBMGS03\exe\jcontrol.EXE
      argv[2] = pf=D:\usr\sap\DEV\SYS\profile\DEV_DVEBMGS03_sapdev
      argv[3] = -DSAPSTART=1
      argv[4] = -DCONNECT_PORT=2919
      argv[5] = -DSAPSYSTEM=03
      argv[6] = -DSAPSYSTEMNAME=DEV
      argv[7] = -DSAPMYNAME=sapdev_DEV_03
      argv[8] = -DSAPPROFILE=D:\usr\sap\DEV\SYS\profile\DEV_DVEBMGS03_sapdev
      argv[9] = -DFRFC_FALLBACK=ON
      argv[10] = -DFRFC_FALLBACK_HOST=localhost
      start_lazy = 0
      start_control = SAP J2EE startup framework
    DpJ2eeStart: j2ee state = STARTED
    rdisp/http_min_wait_dia_wp : 1 -> 1
    ***LOG CPS=> DpLoopInit, ICU ( 3.0 3.0 4.0.1) [dpxxdisp.c   1629]
    ***LOG Q0K=> DpMsAttach, mscon ( sapdev.visu.com) [dpxxdisp.c   11753]
    DpStartStopMsg: send start message (myname is >sapdev_DEV_03                           <)
    DpStartStopMsg: start msg sent
    CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
    Fri Nov 27 02:32:01 2009
    CCMS: Initalizing shared memory of size 60000000 for monitoring segment.
    CCMS: start to initalize 3.X shared alert area (first segment).
    DpJ2eeLogin: j2ee state = CONNECTED
    DpMsgAdmin: Set release to 7000, patchlevel 0
    MBUF state PREPARED
    MBUF component UP
    DpMBufHwIdSet: set Hardware-ID
    ***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c   1050]
    DpMsgAdmin: Set patchno for this platform to 114
    Release check o.K.
    Fri Nov 27 02:32:05 2009
    ***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4248]
    ERROR => NiIRead: SiRecv failed for hdl 4 / sock 1468
        (SI_ECONN_BROKEN/10054; I4; ST; 127.0.0.1:2927) [nixxi.cpp    4248]
    DpJ2eeMsgProcess: j2ee state = CONNECTED (NIECONN_BROKEN)
    DpIJ2eeShutdown: send SIGINT to SAP J2EE startup framework (pid=13356)
    ERROR => DpProcKill: kill failed [dpntdisp.c   371]
    DpIJ2eeShutdown: j2ee state = SHUTDOWN
    Fri Nov 27 02:32:40 2009
    ERROR => W0 (pid 13364) died [dpxxdisp.c   14441]
    ERROR => W1 (pid 13372) died [dpxxdisp.c   14441]
    ERROR => W2 (pid 13380) died [dpxxdisp.c   14441]
    ERROR => W3 (pid 13388) died [dpxxdisp.c   14441]
    my types changed after wp death/restart 0xbf --> 0xbe
    ERROR => W4 (pid 13396) died [dpxxdisp.c   14441]
    my types changed after wp death/restart 0xbe --> 0xbc
    ERROR => W5 (pid 13404) died [dpxxdisp.c   14441]
    my types changed after wp death/restart 0xbc --> 0xb8
    ERROR => W6 (pid 13412) died [dpxxdisp.c   14441]
    ERROR => W7 (pid 13420) died [dpxxdisp.c   14441]
    ERROR => W8 (pid 13428) died [dpxxdisp.c   14441]
    my types changed after wp death/restart 0xb8 --> 0xb0
    ERROR => W9 (pid 13436) died [dpxxdisp.c   14441]
    my types changed after wp death/restart 0xb0 --> 0xa0
    ERROR => W10 (pid 13444) died [dpxxdisp.c   14441]
    my types changed after wp death/restart 0xa0 --> 0x80
    DP_FATAL_ERROR => DpWPCheck: no more work processes
    DISPATCHER EMERGENCY SHUTDOWN ***
    increase tracelevel of WPs
    NiWait: sleep (10000ms) ...
    NiISelect: timeout 10000ms
    NiISelect: maximum fd=1593
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Fri Nov 27 02:32:50 2009
    NiISelect: TIMEOUT occured (10000ms)
    dump system status
    Workprocess Table (long)               Thu Nov 26 21:02:50 2009
    ========================
    No Ty. Pid      Status  Cause Start Err Sem CPU    Time  Program          Cl  User         Action                    Table
    0 DIA    13364 Ended         no      1   0        0                                                                         
    1 DIA    13372 Ended         no      1   0        0                                                                         
    2 DIA    13380 Ended         no      1   0        0                                                                         
    3 DIA    13388 Ended         no      1   0        0                                                                         
    4 UPD    13396 Ended         no      1   0        0                                                                         
    5 ENQ    13404 Ended         no      1   0        0                                                                         
    6 BTC    13412 Ended         no      1   0        0                                                                         
    7 BTC    13420 Ended         no      1   0        0                                                                         
    8 BTC    13428 Ended         no      1   0        0                                                                         
    9 SPO    13436 Ended         no      1   0        0                                                                         
    10 UP2    13444 Ended         no      1   0        0                                                                         
    Dispatcher Queue Statistics               Thu Nov 26 21:02:50 2009
    ===========================
    --------++++--
    +
    Typ
    now
    high
    max
    writes
    reads
    --------++++--
    +
    NOWP
    0
    2
    2000
    6
    6
    --------++++--
    +
    DIA
    5
    5
    2000
    5
    0
    --------++++--
    +
    UPD
    0
    0
    2000
    0
    0
    --------++++--
    +
    ENQ
    0
    0
    2000
    0
    0
    --------++++--
    +
    BTC
    0
    0
    2000
    0
    0
    --------++++--
    +
    SPO
    0
    0
    2000
    0
    0
    --------++++--
    +
    UP2
    0
    0
    2000
    0
    0
    --------++++--
    +
    max_rq_id          12
    wake_evt_udp_now     0
    wake events           total     8,  udp     7 ( 87%),  shm     1 ( 12%)
    since last update     total     8,  udp     7 ( 87%),  shm     1 ( 12%)
    Dump of tm_adm structure:               Thu Nov 26 21:02:50 2009
    =========================
    Term    uid  man user    term   lastop  mod wp  ta   a/i (modes)
    Workprocess Comm. Area Blocks               Thu Nov 26 21:02:50 2009
    =============================
    Slots: 300, Used: 1, Max: 0
    --------++--
    +
    id
    owner
    pid
    eyecatcher
    --------++--
    +
    0
    DISPATCHER
    -1
    WPCAAD000
    NiWait: sleep (5000ms) ...
    NiISelect: timeout 5000ms
    NiISelect: maximum fd=1593
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Fri Nov 27 02:32:55 2009
    NiISelect: TIMEOUT occured (5000ms)
    DpHalt: shutdown server >sapdev_DEV_03                           < (normal)
    DpJ2eeDisableRestart
    DpModState: buffer in state MBUF_PREPARED
    NiBufSend starting
    NiIWrite: hdl 3 sent data (wrt=110,pac=1,MESG_IO)
    MsINiWrite: sent 110 bytes
    MsIModState: change state to SHUTDOWN
    DpModState: change server state from STARTING to SHUTDOWN
    Switch off Shared memory profiling
    ShmProtect( 57, 3 )
    ShmProtect(SHM_PROFILE, SHM_PROT_RW
    ShmProtect( 57, 1 )
    ShmProtect(SHM_PROFILE, SHM_PROT_RD
    DpWakeUpWps: wake up all wp's
    Stop work processes
    Stop gateway
    killing process (13340) (SOFT_KILL)
    Stop icman
    killing process (13348) (SOFT_KILL)
    Terminate gui connections
    wait for end of work processes
    wait for end of gateway
    [DpProcDied] Process lives  (PID:13340  HANDLE:1564)
    waiting for termination of gateway ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=1593
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Fri Nov 27 02:32:56 2009
    NiISelect: TIMEOUT occured (1000ms)
    [DpProcDied] Process died  (PID:13340  HANDLE:1564)
    wait for end of icman
    [DpProcDied] Process lives  (PID:13348  HANDLE:1568)
    waiting for termination of icman ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=1593
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Fri Nov 27 02:32:57 2009
    NiISelect: TIMEOUT occured (1000ms)
    [DpProcDied] Process lives  (PID:13348  HANDLE:1568)
    waiting for termination of icman ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=1593
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Fri Nov 27 02:32:58 2009
    NiISelect: TIMEOUT occured (1000ms)
    [DpProcDied] Process lives  (PID:13348  HANDLE:1568)
    waiting for termination of icman ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=1593
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Fri Nov 27 02:32:59 2009
    NiISelect: TIMEOUT occured (1000ms)
    [DpProcDied] Process lives  (PID:13348  HANDLE:1568)
    waiting for termination of icman ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=1593
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Please help me to start my SAP MMC.
    Thanks

  • Without PRT ,inspection lot shud not get released

    Dear all ,
    We use to attach PRT at inspection plan with DMS, we attache TDS (test data document) as PRT to to operation at inspection plan, client's requriemtn is that if there will be no TDS document attach to ispection lot , it should not get released .
    pls reply .
    Regards
    Prerna

    Dear Prema,
    If you do not maintain the PRT for the inspection plan, do not put the release status for the inspection plan.
    This will block inspection lot from processing as the status of the inspection lot will be in CRTD. once you assign the PRT release the inspection plan and do the resetting of the inspection lot through QAC3.
    Try to explain this Std SAP functionality to client and revert if u need any help.
    Regards,
    Anil

  • Deployment warning: SC null null not known yet, can not get release level

    Hi everybody,
    During the deployment I'm getting the following warning (application_00.log):
    SC null null not known yet, can not get release level for vendor: 'se.sync', name: 'BPE', location: 'Deployment Manager', counter: '42', change number: 'null'
    BPE is the application name and "se.sync" is the provider-name from application-j2ee-engine.xml.
    This seems to indicate that some release level (version?) is not set... How can this be fixed?
    Regards,
    Milosz

    Hi Milosz,
    the warning is because the deploy controller checks for correct version numbers in the DC/SC that is deployed.
    You can just ignore it, your application should run just fine.
    Regards,
    Christian

  • Billing Plan Data not getting copied from Contract to SO

    Hi ,
    I have a Business requirement in which i ham supposed to create a Contract and then release/sales orders with reference to this contract. Whle creating the SO, the header billing plan dates are not getting copied from COntract to Sales Order.
    Please guide me on how can this be done.
    Regards,
    Madhav

    Hi,
    plz check your copy controls VTAA from contract to release order ,under the contract item category there is Field-FPLA check what is the routine that is assigned.
    you can either use routine-401 or 402

  • Characterestics is not getting displayed from ODS in Multiprovider

    I have Join ODS and remote cube in Multiprovider.And data is not getting displayed from ODS fields neither char not KF getting displyed in Multiprovider.I have checked the identification in Char that Char is presend in both the Cube and ODS,But that Char has data in ODS and not in Cube so I checked Char from ODS in Identification.I am still not getting data from ODS.
    Can anyone help me in it?

    How many requests do u have in the ODS?
    If u have only 1 then just right click on DSO and say delete data it will be faster than deleting by request wise....
    What is the message u r getting when u r trying to delete the request?
    Khaja

  • I am having a big problem. I am not getting notifications from snapchat and only snapchat. I've made sure every notification setting was on and it just won't work. I have also restored my phone and deleted the app and re-downloaded it multiple times. Help

    I am having a big problem. I am not getting notifications from snapchat and only snapchat. I've made sure every notification setting was on and it just won't work. I have also restored my phone and deleted the app and re-downloaded it multiple times. It just wont give me my notifications. Help please.

    Go to Settings > Privacy > Location Services.
    Turn off SnapChat.
    Go to Settings > Notification Center
    Turn off SnapChat.
    Restart the device.
    Go to Settings > Privacy > Location Services.
    Turn on SnapChat.
    Go to Settings > Notification Center
    Turn on SnapChat.
    Test the issue.

  • Excise rate and value is not getting defaulted from the purchase order

    Hi all,
    While capturing excise invoice , the excise rate and value is not getting defaulted from the purchase order and in Excise Item Tab BED,AED,ECS is Zero at both header as well as item level for only one material in STO process and if we are doing same process taking other material all things are coming perfectly and We are maintaining condition with respect to vendor,plant and material combination.Any input related to this will be helpfull and rewarded.
    Regards
    Vishal

    Hi,
    Follow STO Process for this;
    1.Create a vendor for the company code of receiving plant, using account group: 0007 using T-Code XK01.
    2. Assign this vendor to Delivering plant
    Go to XK02 >Purchasing view>Extras>Add. Purchasing data>Plant
    3. Create internal customer with the sales area of the vendor. Go To XD01
    4. In pricing procedure determination relevant to STO, assign document Pricing Procedure and customer pricing procedure appropriate for STO to get the pricing in the invoice.
    5. Maintain condition records for the relevant pricing condition.
    6. Some more setting for STO: Go to MM> Purchasing > Purchase Order > Set up STO > define shipping data for plants > Go to Receiving plant >assign customer here & Supplying SA (for billing) to Receiving plant here
    7. Go to MM > Purchasing > Purchase Order > Set up STO > define shipping data for plants > Go to Supplying plant and assign the sales area of receiving plant.
    8. Go to MM > Purchasing > Purchase Order > Set up STO > assign delivery Type & Checking rule
    Assign the delivery type to document type. In this case, Delivery type NLCC is assigned to Document type NB
    9. Go to MM> Purchasing > Purchase Order > Set up STO > Assign document Type, One step Procedure, Under delivery tolerance
    Assign the document type NB to supplying plant and receiving plant
    10. After all settings, Create the STO using T-Code: ME21N and maintain pricing conditions of freight and Save.
    11. In supplying plant Maintain condition record in sales using VK11 the same will flow in receiving plant when referring the OBD no during MIGO.
    10. Create Delivery: VL10G
    12. Picking, PGI: VL02N
    13. Billing: VF01
    Save the document and its done
    14. J1IIN - Outgoing Excise Invoice
    15. MIGO - Goods Receipt against outbound Delivery
    16. J1IEX - Capture & Post Excise Invoice
    Rgs

  • Could not get IOR from Domino Server while provisioning Lotus Notes

    Hi all,
    There are two servers that have OIM installed, development server and test server. From development server, we can
    provision to Lotus Notes just fine. But for test server everytime when
    provision to Lotus Notes. There will be an exception
    NotesException: Could not get IOR from Domino Server: http://10.3.100.61:63148/diiop_ior.txt
    From test server
    I can access the URL http://10.3.100.61:63148/diiop_ior.txt using Internet Explorer
    I can telnet to 10.3.100.61 63148
    I can use connector testing program and it work fine
    All configuration and jar files are the same as development server
    There is no firewall or antivirus running in both systems.
    Both server is virtual server using VMWare.
    OS: Windows2003R2 Enterprise
    DB: Oracle 10gR2 10.2.0.2
    AS: Oracle AS 10g 10.1.3.3.0
    OIM 9.1.0
    Lotus Notes Connector 9.0.4.2
    Thank you.
    Satit
    The error is as below
    =================================================
    INFO,11 Nov 2008 11:24:26,109,[ADAPTER.LOTUSNOTES],LotusNotesProvision::init
    INFO,11 Nov 2008 11:24:26,109,[ADAPTER.LOTUSNOTES],LotusNotesProvision::init
    DEBUG,11 Nov 2008 11:24:26,109,[ADAPTER.LOTUSNOTES],LotusNotesProvision::init : Host 10.3.100.61
    DEBUG,11 Nov 2008 11:24:26,109,[ADAPTER.LOTUSNOTES],LotusNotesProvision::init : Port 63148
    DEBUG,11 Nov 2008 11:24:26,109,[ADAPTER.LOTUSNOTES],LotusNotesProvision::init : Admin Pongtape Ungkawanish/Telecom./Central Support/Fin./KK_Bangkok/TH
    DEBUG,11 Nov 2008 11:24:26,109,[ADAPTER.LOTUSNOTES],LotusNotesProvision::init : Certifier OU
    DEBUG,11 Nov 2008 11:24:26,109,[ADAPTER.LOTUSNOTES],LotusNotesProvision::init : Before session
    08/11/11 11:24:26 Running setTimeoutParameters
    08/11/11 11:24:26 Running Connect
    INFO,11 Nov 2008 11:24:26,109,[ADAPTER.LOTUSNOTES],LNotesConnectionUtil::getSession
    INFO,11 Nov 2008 11:24:26,109,[ADAPTER.LOTUSNOTES],LNotesConnectionUtil::getSession : ***Non-Secure Mode
    ERROR,11 Nov 2008 11:24:26,109,[ADAPTER.LOTUSNOTES],LNotesConnectionUtil::getSession : ***Connection refused to Lotus Notes......
    NotesException: Could not get IOR from Domino Server: http://10.3.100.61:63148/diiop_ior.txt
         at lotus.domino.NotesFactory.requestIORPlain(Unknown Source)
         at lotus.domino.NotesFactory.requestIORUsingArgs(Unknown Source)
         at lotus.domino.NotesFactory.getIOR(Unknown Source)
         at lotus.domino.NotesFactory.createSessionUP(Unknown Source)
         at lotus.domino.NotesFactory.createSession(Unknown Source)
         at com.thortech.xl.Integration.HostAccess.LNotesConnectionUtil.getSession(Unknown Source)
         at com.thortech.xl.Integration.HostAccess.LotusNotesProvision.connect(Unknown Source)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:585)
         at com.thortech.xl.adapterGlue.ScheduleItemEvents.adpLNCREATEUSER.CONNECT(adpLNCREATEUSER.java:449)
         at com.thortech.xl.adapterGlue.ScheduleItemEvents.adpLNCREATEUSER.implementation(adpLNCREATEUSER.java:160)
         at com.thortech.xl.client.events.tcBaseEvent.run(Unknown Source)
         at com.thortech.xl.dataobj.tcDataObj.runEvent(Unknown Source)
         at com.thortech.xl.dataobj.tcScheduleItem.runMilestoneEvent(Unknown Source)
         at com.thortech.xl.dataobj.tcScheduleItem.eventPostInsert(Unknown Source)
         at com.thortech.xl.dataobj.tcDataObj.insert(Unknown Source)
         at com.thortech.xl.dataobj.tcDataObj.save(Unknown Source)
         at com.thortech.xl.ejb.beansimpl.tcProvisioningOperationsBean.retryTasks(Unknown Source)
         at com.thortech.xl.ejb.beans.tcProvisioningOperationsSession.retryTasks(Unknown Source)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:585)
         at com.evermind.server.ejb.interceptor.joinpoint.EJBJoinPointImpl.invoke(EJBJoinPointImpl.java:35)
         at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
         at com.evermind.server.ejb.interceptor.system.DMSInterceptor.invoke(DMSInterceptor.java:52)
         at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
         at com.evermind.server.ejb.interceptor.system.TxRequiredInterceptor.invoke(TxRequiredInterceptor.java:50)
         at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
         at com.evermind.server.ejb.interceptor.system.SecurityRoleInterceptor.invoke(SecurityRoleInterceptor.java:47)
         at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
         at com.evermind.server.ejb.interceptor.system.DMSInterceptor.invoke(DMSInterceptor.java:52)
         at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
         at com.evermind.server.ejb.InvocationContextPool.invoke(InvocationContextPool.java:55)
         at com.evermind.server.ejb.StatelessSessionEJBObject.OC4J_invokeMethod(StatelessSessionEJBObject.java:87)
         at tcProvisioningOperations_RemoteProxy_6ocop18.retryTasks(Unknown Source)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:585)
         at com.evermind.server.rmi.RmiMethodCall.run(RmiMethodCall.java:53)
         at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
         at java.lang.Thread.run(Thread.java:595)
    Caused by: java.lang.NullPointerException
         at sun.net.www.protocol.http.HttpURLConnection.plainConnect(HttpURLConnection.java:781)
         at sun.net.www.protocol.http.HttpURLConnection.connect(HttpURLConnection.java:669)
         at sun.net.www.protocol.http.HttpURLConnection.getInputStream(HttpURLConnection.java:913)
         ... 45 more
    INFO,11 Nov 2008 11:24:26,109,[ADAPTER.LOTUSNOTES],Unable to connect to the target. Attempting to reconnect after delay of 2000ms.......
    INFO,11 Nov 2008 11:24:28,110,[ADAPTER.LOTUSNOTES],LNotesConnectionUtil::getSession
    INFO,11 Nov 2008 11:24:28,110,[ADAPTER.LOTUSNOTES],LNotesConnectionUtil::getSession : ***Non-Secure Mode
    ERROR,11 Nov 2008 11:24:28,110,[ADAPTER.LOTUSNOTES],LNotesConnectionUtil::getSession : ***Connection refused to Lotus Notes......
    NotesException: Could not get IOR from Domino Server: http://10.3.100.61:63148/diiop_ior.txt
         at lotus.domino.NotesFactory.requestIORPlain(Unknown Source)
         at lotus.domino.NotesFactory.requestIORUsingArgs(Unknown Source)
         at lotus.domino.NotesFactory.getIOR(Unknown Source)
         at lotus.domino.NotesFactory.createSessionUP(Unknown Source)
         at lotus.domino.NotesFactory.createSession(Unknown Source)
         at com.thortech.xl.Integration.HostAccess.LNotesConnectionUtil.getSession(Unknown Source)
         at com.thortech.xl.Integration.HostAccess.LNotesConnectionUtil.getSession(Unknown Source)
         at com.thortech.xl.Integration.HostAccess.LotusNotesProvision.connect(Unknown Source)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:585)
         at com.thortech.xl.adapterGlue.ScheduleItemEvents.adpLNCREATEUSER.CONNECT(adpLNCREATEUSER.java:449)
         at com.thortech.xl.adapterGlue.ScheduleItemEvents.adpLNCREATEUSER.implementation(adpLNCREATEUSER.java:160)
         at com.thortech.xl.client.events.tcBaseEvent.run(Unknown Source)
         at com.thortech.xl.dataobj.tcDataObj.runEvent(Unknown Source)
         at com.thortech.xl.dataobj.tcScheduleItem.runMilestoneEvent(Unknown Source)
         at com.thortech.xl.dataobj.tcScheduleItem.eventPostInsert(Unknown Source)
         at com.thortech.xl.dataobj.tcDataObj.insert(Unknown Source)
         at com.thortech.xl.dataobj.tcDataObj.save(Unknown Source)
         at com.thortech.xl.ejb.beansimpl.tcProvisioningOperationsBean.retryTasks(Unknown Source)
         at com.thortech.xl.ejb.beans.tcProvisioningOperationsSession.retryTasks(Unknown Source)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:585)
         at com.evermind.server.ejb.interceptor.joinpoint.EJBJoinPointImpl.invoke(EJBJoinPointImpl.java:35)
         at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
         at com.evermind.server.ejb.interceptor.system.DMSInterceptor.invoke(DMSInterceptor.java:52)
         at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
         at com.evermind.server.ejb.interceptor.system.TxRequiredInterceptor.invoke(TxRequiredInterceptor.java:50)
         at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
         at com.evermind.server.ejb.interceptor.system.SecurityRoleInterceptor.invoke(SecurityRoleInterceptor.java:47)
         at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
         at com.evermind.server.ejb.interceptor.system.DMSInterceptor.invoke(DMSInterceptor.java:52)
         at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
         at com.evermind.server.ejb.InvocationContextPool.invoke(InvocationContextPool.java:55)
         at com.evermind.server.ejb.StatelessSessionEJBObject.OC4J_invokeMethod(StatelessSessionEJBObject.java:87)
         at tcProvisioningOperations_RemoteProxy_6ocop18.retryTasks(Unknown Source)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:585)
         at com.evermind.server.rmi.RmiMethodCall.run(RmiMethodCall.java:53)
         at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
         at java.lang.Thread.run(Thread.java:595)
    Caused by: java.lang.NullPointerException
         at sun.net.www.protocol.http.HttpURLConnection.plainConnect(HttpURLConnection.java:781)
         at sun.net.www.protocol.http.HttpURLConnection.connect(HttpURLConnection.java:669)
         at sun.net.www.protocol.http.HttpURLConnection.getInputStream(HttpURLConnection.java:913)
         ... 46 more

    check if DIIOP service is turned on at the Lotus Domino side...
    Oleg.

Maybe you are looking for

  • Unable to sync 2 different iPods

    I have 2 separate folders for 2 iPods. iPod(1) installs with no problem. When I plug in the iPod(2), I get "Some items in the iTunes library were not copied to the iPod because they could not be found". I then click 'Ok'. Then I goto iPod(2), then Mu

  • I was hit by a slew of Java Script Exploits as well as Trojans this past week

    Hello: On 7/10/2012, my desktop machine got hit by a slew of Virus and Trojans which even though removed, they are impacting the use of my computer. Information below. First 7.10/2012 Trojan win32/Tibs.IT Severe Threat detected by Microsoft security

  • Pre-InDesign – preparing text for ePub

    This is not exactly an InDesign issue but I can't imagine where else I might start this discussion! I have to convert a number of printed books to ePub. The titles are mostly fiction, (they are the usual simple designs with one-column layouts and wit

  • Qt export pct with name change

    I've assembled a script that exports a frame from a Qt7 as a *.pct file. It places the image in a folder on the desktop. The part that I am struggling with is the naming. Here is my script: tell application "QuickTime Player" activate try if not (exi

  • Exec_sql.pll is needed

    Dear Friends We are still using Developer forms 4.5 version. Now there is a requirement to update a Sybase database from our application. I need exec_sql.pll library to perform this requirement which i am unable to find in 4.5 installation cd. help m