PO Item Deletion ON Final Release

Hi ,
Can u tel me , purchase order is released by three levels of approvers then any one delete the released po line item through me22n transaction a mail should go to the all released approvers . on deletion after final release CHANGE event is triggering in SWEL...plz help me out how to solve this..
i copied standard WS20000075 to custom Z , every thing working fien , but on deletion of line item standard supports or how to approach this i am not getting ?
thanks,
sandeep..

Hi ,
After final release workflow will not be active the actual release workflow will be in completed status if all level release is complete .
So i want to send a mail to all approvers in new workflow ...
created an event deleted Ybus2012 delegation of bus 2012..
in swec transaction try to create a entry , FIELD RESTRICTIONS what to enter for my event..
when i enter AENNR , (Key for change doc. object AENNR and business object type BUS2012 are incompatible) error is coming ....
can anyone suggest me ..
thanks ..
sandeep

Similar Messages

Dletetion of line item in PR after release..?

Hi all
Can anybody explain me ,
I have created PR with 8 line item nad PR is released , now i want to delete 1 lint item in that PR after release ..?
Pls explain me som solution to rectify this problm..
Thanks
sap-mm

Hi mm,
Please Let me know that your pr is overall released or Item wise released.
Go to ME54N Individual Pr release and Select the Line item which you want to set the cancel release and Revoke it and save.
Reg,
Ashok
Please Close all your issues, if solved.

Could I use jstl tag in the JSP page of Creator 2 final release?

I have a JSP page used to work well in Creator 2EA2. The page
has the following code snippets:
<c:forEach items="${SessionBean1.webQuery1.details}" var="item">
                                                    <tr>
                                                        <td class="detailKey">
                                                            <c:out value="${item.key}"/>
                                                        </td>
                                                        <td class="detailValue">
                                                            <c:out value="${item.value}"/>
                                                        </td>
                                                    </tr>
                                                </c:forEach>
...Basically, it generates a table columns.
After migrating to Creator2 final release, a fatal exception is thrown
when the page is launched :
Description: An unhandled exception occurred during the execution of the web application. Please review the following stack trace for more information regarding the error.
Exception Details: org.apache.jasper.JasperException
/Page1.jsp(148,132) According to TLD or attribute directive in tag file, attribute items does not accept any expressions
Possible Source of Error:
   Class Name: org.apache.jasper.compiler.DefaultErrorHandler
   File Name: DefaultErrorHandler.java
   Method Name: jspError
   Line Number: 43
Source not available. Information regarding the location of the exception can be identified using the exception stack trace below.
Stack Trace:
org.apache.jasper.compiler.DefaultErrorHandler.jspError(DefaultErrorHandler.java:43)
org.apache.jasper.compiler.ErrorDispatcher.dispatch(ErrorDispatcher.java:414)
org.apache.jasper.compiler.ErrorDispatcher.jspError(ErrorDispatcher.java:155)
org.apache.jasper.compiler.Validator$ValidateVisitor.checkXmlAttributes Any suggestion, or work around?
Thanks

There is something strange in the HTML for you posedt, so I cannot clearly see what you are trying to do in your JSP page. But either of the following kinds of usage would cause this kind of error:
    <h:dropDown ... items="<%= ...some Java expression ...>"/>or
    <h:dropDown ... items="${...some JSP EL expression...}"/>This is because JSF component tags allow neither Java runtime expressions nor JSP EL expressions (at least in JSF 1.1, which is what Creator 2 supports). The answer is to use a JSF EL expression instead, like this:
    <h:dropDown ... items="#{... some EL expression}"/>Craig

Change in Expected Delivery date (EDD) field in the PO after final release

Hello Experts,
There is a business requirement, whereby after PO final release is completed & when the PO is released for further processing, no further changes should be possible, except for the expected delivery date (EDD) field in the Delivery schedule tab of the PO Item details. Other than this, no changes should be possible in the PO, neither qty, nor price, not even the simple PO text should be allowed to get changed. In other words no field should be allowed to change.
Ideally, except the EDD field, other all fields should be in grey mode, or atleast changes in any of the PO fields (except EDD) should not be allowed to get saved after the PO is final released.
Please let me know if SAP provides any such facility, whereby you can selectively choose certain fields (like EDD field) on which Release Strategy should not be applied & changes should be allowed in these fields even after PO final release.
Thanks in advance,
Zafar.

If you go to OMET transciton and here you can assign the field selection key in the field FieldSe
and assing the User parameter EFB in user id of the user using SU3 transction
for more help see below
Create a Functional Authorization in the Following path:
Material Mangement - Purchasing - Authorization Management - Define Functional Authorization for Buyers
Now, in SU3 trxn ,Give the User Parameter EFB in the user master Parameters Tab and give the parameter value.
create the fields selction which you want use here in PO field seleciton config.

Custom field update in Purchase Requisition Final Release

Hi,
We have PR release strategy at Item level.
In PR table EBAN include I have added new field as ZZREL_DT (for final release date), This Field I want to update when final release will get triggred for the PR item.
For updating this custom field I have try with Enhancement 'M06B0002' but system is not updating the value in new field , and as in BADI 'ME_REQ_POSTED', the IM_EBAN is an importing structure ,system is not allowing to change the value if we implement this BADI.
Is there any user exit or BADI, to update this custom field, I want to update the system date when user releasing the PR item with ME54N or ME55 transaction.
Regards,
Zafar

Hi ,
Try with create new tab in PR item level, add field in custom tab example Final release Tab.
Try to fetch data from EBAN table when final release happened ( based on status ) the date will update in this table. I hope this is helpful.
Use user exit to create custom tab and custom field
enhancement MEREQ001 : check this enhancement.
user exit EXIT_SAPLMEREQ_0*
I hope it is helpful

Kindle app - Not Working or Compatible with Yosemite... On installation of Yosemite final release moved to incompatibel programs!

Kindle app -> Not Working or Compatible with Yosemite... On installation of Yosemite final release moved to incompatibel programs.
When I go to download KINDLE not available in Cyprus App store... Asks me to switch to USA I say yes... And then gives me a dead link.
Is kindle not available for download in certain countries? whats going on here?
(My initial post was deleted - for "non-constructive comments" but I edited it removing what i believe they deemed non-constructive)
Would have been nice if they answered my question and not only deleted my post.

[url="http://web6.streamhoster.com/em2253/ZEN/ZenDeviceManager.wmv]See Movie[/url]?Hi, take a look at the movie... hopefully I answer to your question is there. [b]Let me know if you can NOT see it... [/b]and I will send you a picture. [color="#ff0000"]and if you can see the movie, give me feedback on it. Did it look ok in your computer? (it changes with all computers depending on your setting and player!). [color="#ff0000"]Was the sound ok?I almost wish I had not titled this post as "Happy Conclusion." It was happy but only a day or two... then I started having other problems... unbelievable. So, If I gave the wrong impression, sorry!

How to set the conditions for item deletion approval workflow?

Hi,
I have created approval workflow for item modifications ie, when user try to modify an item, it will send a mail to Project Manager. For that I set the conditions in Change the behavior of the overall task: 1. When the task process starts 2 . When the task
process completes .
Change the behavior of the single task: 1.when a task is Pending.
[I followed this https://www.nothingbutsharepoint.com/sites/eusp/Pages/5-Steps-to-Enhance-SharePoint-2010-Approval-Workflow.aspx ]
My Requirement is that I want to set this same workflow for the scenario: when the user deletes an item it will send a mail (intimation mail for item deletion) to Project Manager. here i dont want to send modification mails when user deletes an item.
When user modifies an item: 1. intimation mail, 2. Approve/Reject mail 3. intimation for approval / rejection mail.
When user deletes an item: 1. intimation mail.
How can we set it in one approval workflow?? where i have to set the condition for sending either item modification mails or deletion mail.
Thanks,
Praveen ji

Hi,
According to your post, my understanding is that you wanted to start approval workflow when item deleted.
You should first make some changes to trigger the workflow when you delete the item.
You can use the Event Receiver to achieve it.
In order to trigger workflow on item delete you need to create event receivers and from event receiver call the workflow already attached with list.
http://ravendra.wordpress.com/sharepoint-workflow-on-list-item-delete/
You can also create custom action to start the workflow, you can refer to the following article, then modify the workflow as your need.
http://blogs.sharepoint911.com/blogs/jennifer/Lists/Posts/Post.aspx?ID=50
Thanks & Regards,
Jason
Jason Guo
TechNet Community Support

NPE for textField text after migration from ea2 to final release , help....

I migrate an application from JSC2 EA2 to JSC2 final release
In one of my page (first page that i check after migration) I have some text field.
In a button action i used those textfields Text for some processing.
Now after i press submit key (whether text boxes are full or empty) i get null pointer exception when i try to access the textfields text
by using getTextField1().getText().toString()
can any one say where i have mistaken in my migration plane ?
Thanks

Hi,
Suggest to replace all butttons using FCS version.
There was some change from EA to FCS for buttons.
e.g. if you have multiple buttons on a Page that was created using EA
then the wrong action handler will get called
hth
John

Camera Raw 4.5 final release?

Now it's been four weeks since Camera Raw 4.5 Release Candidate (ACR 4.5.0.161) was brought to us via Adobe Labs. Does anyone have any issues with it? I don't. Does anyone have an idea when the final release is supposed to arrive? I feel a four-week testing period is more than adequate for a tentative version that's supposed to be a "Release Candidate" (however the plug-in calls itself "4.5 Beta" ... go figure).
Another Camera Raw version most likely will be due in October, to support all the new digital cameras and backs that (hopefully) will get introduced at Photokina in September. I wonder if that's going to be ACR 4.6 ... or will ACR 4.5 "Grand Master" (which means "final release" in Adobe speak) be deferred until then?
-- Olaf

Jeff Schewe wrote:
> Fortunately, it's not your job
> to worry about it, is it?
Fortunately not, indeed.
Jeff further wrote:
> If you are unhappy [...] you are under
> no obligation to use it if you don't want to.
Huh? The conclusions you're drawing from my thinking aloud are, umm ... strange, to say the least. If you feel my inquiry was inappropriate and/or pointless then your reply also is.
Actually, I am quite happy with ACR 4.5RC, and furthermore I didn't hear anybody else reporting any problems. And that's exactly why I'm wondering why the final release isn't out yet. I guess I'd be less wondering if this tentative version had been announced and communicated as Beta rather than as Release Candidate. Anyway ... I'm just curious. It does not mean I was unhappy in any way.
Jeff further wrote:
> ... so, you'll just have to wait, huh?
Yes, obviously.
Jeff further wrote:
> Hey, it's nice out, go shoot something ...
Glad to hear it's nice on your side of the Big Pond, too.
-- Olaf

Lightroom 3.2 and Camera Raw 6.2 final releases are available

Lightroom 3.2 and Camera Raw 6.2 are now available as final releases on Adobe.com and through the update mechanisms available in Photoshop CS5 and Lightroom 3. These updates include additional lens profiles support among others. Check out http://blogs.adobe.com/lightroomjournal/. Following the example of Adobe's collaboration with SIGMA, leading lens manufacturers such as Pentax, Tamron and Zeiss worked closely with Adobe to create some of the profiles.
-Simon

Excellent! Now if there were only a way to use my S95 in raw... I guess I'll have to wait another few months

Date of Final Release Indicator for PO Release

Is there a table in SAP that provides the date the PO was approved for Final Release? I know that through ME23N you can get this information in the Environment and Header Changes area, but we would like to add this information to a report and are having trouble locating where SAP is storing the data.

Hi,
Pass into CDPOS table:
OBJECTCLAS = u201CEINKBELEGu201D , OBJECTID = PO Number (EBELN), T. Code = u201CME28 or equal to ME29Nu201D and Get all change document no. (CHANGENR)
TABNAME = u201CEKKOu201D, u201CField Name= FRGKE, Old Value = u201C0u201D and New value = u201C1u201D in to CDPOS and get latest change document number (CHANGENR).
Then pass CHANGENR into Change document No (CDHDR- CHANGENR), OBJECTCLAS = u201CEINKBELEGu201D,
U get who has released and date also.
Regards,
chinna

Changeability of PO after final release

Dear Gurus,
My client requirement is, PO should not be able to be changed once final release has happened. They should be able to change only after revoking the final release and again releasing it.
So, if I put changeability of Release indicator as "1", it will not allow to do any changes after final release including revoking the PO once it is outputted. How to resolve this?
Thanks,
Satish

See the changeability option under Release group
1     Cannot be changed
2     Changeable, no new determination of strategy
3     Changeable, new release in case of new strategy
4     Changeable, new release in case of new strat. or val. change
5     Changeable, new release if new strategy/outputted
6     Changeable, new rel. if new strat. or value change/outputted
     Changeable, new release in case of new strategy
to my understanding option 4 is more relevant to your requirement

Restriction of revoke after final release

Hi experts,
After final release of purchasing document lets say PR or PO user should not be able to revoke it.
Any suggestions highly appreciated apart from getting it done through user exit.
Regards,
Maverick

Dear Ramesh,
Thanks for your response.
I have already set changeability to 1 but my concern is after PR final approval if a PO is created with its reference then in this PR user should not be able to revoke or cancel an approval.
I think we can do this with user exit but is there any other alternative?
regards,
Maverick
Edited by: Maverick 331 on Jun 16, 2009 1:00 PM

What field in EKKO determine the final release dateof PO

hi,
i need to have the final release date to be show in a purchase Order print out. but i cant find the final release date field in EKKO table. can you please advice how am i going to get the final release date?
very thanks for the help.

Hi,
Final release date is not stored in EKKO it store in CDHDR table you can chaeck CDHDR-UDATE field for that.
Regards
Gagan

Problem in PR update after final release

Dear Expert,
I have problem in release PR, when PR already release (indicator release '1' -> cannot be changed), it can't be changed from ME52N. But for PR that generated from maintenance order, user still can add new item in maintenance order and PR will automatically have new item without asking new release.
Does anyone have solution for this??Thank you.
Rgds,
Desty.

Hi Desty,
This is not considered an error, please refer the question 1 of the note   493900   FAQ: Release Strategy :
1. Why can I modify a purchase requisition although I set the
     changeability of the release indicator to '1' ('Cannot be changed')
Answer.
The purchase requisition is not modifiable via a purchasing transaction
like ME52 or ME52N. But it is possible to change the purchase
requisition from any other external application like sales order,
planned order, maintenance order or network.
The Changeability functionality only concerns the purchasing
transactions. This is intended and a new release strategy determination
takes place if there is a modification of the data in the external
application.
Regards,
Mauro

PO Item Deletion ON Final Release

Similar Messages

Maybe you are looking for