PO Items being added to old PO's where the vendor is blocked
In our business has found that they are able to add new PO items to existing released Purchase Orders even though the Vendor Master record has been blocked for the specific / all Purchasing Organisations.
Please advise whether there is some configuration amendment that can be made that will prevent this from happening. This appears to be because the Vendor Master data is not being re-read when adding lines to existing orders.
The business are unable to create completely new orders for blocked vendors.
If there is no configuration option to prevent this then please provide any User Exit within the Purchase Order to check whether the Purchasing Organisation Specific or All Purchase Org's block has been entered for the Vendor Master being used
Hi,
Have you define new FY if yes then configure number range. If no then check you number range is disturb. For this you have to contact FI Consultant/ SD Consultant.
Regards,
Anil
Similar Messages
-
Payment run is picking up the old bank details of the vendor
Hi Experts,
Following is the issue :
1. Vendor invoice entered through MIRO/FB60. This picks up the prevalent bank details from the vendor master.
2. Vendor bank details are changed subsequently and payment run made. The payment run picks up the old bank details ( from the invoice document if it saves any where for the posted document ) and not the current details as in the vendor master.
3. Payment is returned from the bank as previous bank details are not valid any longer.
4. I canceled/reversed the MIRO/FB60 document alongwith the payment document.
I re-enter the same invoice through MIRO/FB60. It picks up the current bank data from the vendor master(which are the new bank details and are correct).
5. Then I make the payment run but the payment still goes to the previous bank details (which were changed and are no longer valid) and not to the current details(which are on the invoice) and is again returned by the bank.
What is the reason and how to correct this issue. Your early reply will be really appreciated.
Thanks & Regards,
BABAHi,
By default the payment will go to the bank that is listed first in the vendor master. If you do not need the old details, delete them completely from the master data and leave only the new ones. Alternatively use the Partner Bank field to assign the invoice to which Bank the payment is to be made.
Kind regards -
I have an online etsy shop. There is a page on which to list a new item to be added to one's shop. When it is time to upload the pic or pics, I cannot find them,eventhough each has a name and all are in an i photo album. On my old computer I would "save as" and then could find it easily in my computer. In the new mac I just got, I cannot easily find the pic when trying to upload. Could you tell me an easy way to save each pic so that I can find it for uploads to that site? Thanks in advance. OS is Snow Leopard. Whatever i photo came with that would be the product I am using.
The following is from a post by Terence Devlin on accessing photos for use outside of iPhoto. It's the definitive treatise on the subject.
There are many, many ways to access your files in iPhoto:
You can use any Open / Attach / Browse dialogue. On the left there's a Media heading, your pics can be accessed there. Command-Click for selecting multiple pics.
(Note the above illustration is not a Finder Window. It's the dialogue you get when you go File -> Open)
You can access the Library from the New Message Window in Mail:
There's a similar option in Outlook and many, many other apps.
If you use Apple's Mail, Entourage, AOL or Eudora you can email from within iPhoto.
If you use a Cocoa-based Browser such as Safari, you can drag the pics from the iPhoto Window to the Attach window in the browser.
If you want to access the files with iPhoto not running:
For users of 10.6 and later:
You can download a free Services component from MacOSXAutomation which will give you access to the iPhoto Library from your Services Menu. Using the Services Preference Pane you can even create a keyboard shortcut for it.
For Users of 10.4 and 10.5
Create a Media Browser using Automator (takes about 10 seconds) or use this free utility Karelia iMedia Browser
Other options include:
1. Drag and Drop: Drag a photo from the iPhoto Window to the desktop, there iPhoto will make a full-sized copy of the pic.
2. File -> Export: Select the files in the iPhoto Window and go File -> Export. The dialogue will give you various options, including altering the format, naming the files and changing the size. Again, producing a copy.
3.Show File:
a. On iPhoto 09 and earlier: Right- (or Control-) Click on a pic and in the resulting dialogue choose 'Show File'. A Finder window will pop open with the file already selected.
b. On iPhoto 11 and later: Select one of the affected photos in the iPhoto Window and go File -> Reveal in Finder -> Original. A Finder window will pop open with the file already selected. -
Item has already been added. Key in dictionary: '???' Key being added: '???'
Since 1 week I am unable to access any of the Sharepoint 2010 sites that exist in my farm. The error that is shozn is:
Item has already been added. Key in dictionary: '???' Key being added:
Here is the stacktrace:
[ArgumentException: Item has already been added. Key in dictionary: '???' Key being added: '???']
System.Collections.Hashtable.Insert(Object key, Object nvalue, Boolean add) +10065554
System.Collections.Specialized.StringDictionary.Add(String key, String value) +89
Microsoft.SharePoint.SPWeb.GetProperties() +563
Microsoft.SharePoint.Utilities.SPPropertyBag..ctor(GetProperties getProperties, UpdateProperties updateProperties) +62
Microsoft.SharePoint.SPWeb.get_Properties() +130
Microsoft.Office.Server.Utilities.PageUtility.GetPagesListName(SPWeb web) +39
Microsoft.SharePoint.Publishing.PublishingWeb.get_PagesListName() +152
Microsoft.SharePoint.Publishing.CachedArea..ctor(PublishingWeb area, String id, String parentId, CachedUserResource title, String url, CachedUserResource description, CachedObjectFactory factory) +3914
Microsoft.SharePoint.Publishing.CachedArea.CreateCachedArea(PublishingWeb area, CachedObjectFactory factory, String parentId) +590
Microsoft.SharePoint.Publishing.CachedObjectFactory.CreateWebFromUrlNoUpperCase(String url, Guid webIdHint, String urlCaseHint) +555
Microsoft.SharePoint.Publishing.WebControls.ConsoleUtilities.IsMasterPageGalleryUrlForSite(Uri uri) +117
Microsoft.SharePoint.Publishing.WebControls.ConsoleVisibleUtilities.ConsoleAppliesInCurrentContext() +41
Microsoft.SharePoint.Publishing.Internal.WebControls.PublishingRibbon.OnLoad(EventArgs e) +95
System.Web.UI.Control.LoadRecursive() +66
System.Web.UI.Control.LoadRecursive() +191
System.Web.UI.Control.LoadRecursive() +191
System.Web.UI.Control.LoadRecursive() +191
System.Web.UI.Control.LoadRecursive() +191
System.Web.UI.Control.LoadRecursive() +191
System.Web.UI.Control.LoadRecursive() +191
System.Web.UI.Control.LoadRecursive() +191
System.Web.UI.Control.LoadRecursive() +191
System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +2428
Also, when I am trying to access my homepage on the root sitecollection, I see this error:
The DataSourceID of 'V4QuickLaunchMenu' must be the ID of a control of
type IHierarchicalDataSource. A control with ID 'QuickLaunchSiteMap' could not
be found.Recently have you removed, deleted, changed password of any account used in sharepoint.
Check in > Security > Manage account
Check in IIS > Application pool, if any pool is stopped.
If you have a old copy of web.config files, check if they were modified.
Was any new solution\wsp deployed in farm
please share ULS logs, event viewer and fiddler traces.
If this helped you resolve your issue, please mark it Answered -
Event Receiver:Item is Being Adding Event Recevier Issue
Hi All,
* I had written Simple event receviers(Item is Being Adding) to a site at FarmLevel(Farm Solution) and below is the code for it.
* In below code I am adding the List name to a Column called "Name" ,when Item is being adding the code is getting loop and inserting unwanted data and updating Column "Name" with it instead of updating when item is added
*Below if u see there is no value in Column "Name" when I insert values "Mark Devis"(Title) and "In Meeting"(Body) columns
Can any one help me how can I solve the issue
Code:
string listitle = properties.List.Title + "" + "is List Name";
string siteurl = http://sp2010:8080/personal/Sample/;
using (SPSite mysite = new SPSite(siteurl))
using (SPWeb myweb = mysite.OpenWeb())
SPList mylist = myweb.Lists["Announcements"];
SPListItem newitem = mylist.Items.Add();
newitem["Name"] = listitle.ToString();
newitem.Update();
Result:
SamarHello Samar,
Try to use before/after properties to update item in list on ItemAdding event.
http://sarveshspn.blogspot.in/2010/05/using-itemadding-and-afterproperties-to_08.html
http://social.msdn.microsoft.com/Forums/sharepoint/en-US/1ed217b1-9441-4fe1-b3aa-68b2768bdfc7/updating-list-item-value-on-the-itemadding-event-handler-of-an-item-receiver-class?forum=sharepointdevelopmentlegacy
Also make sure that you have at least contributor right in list to edit data.
Hemendra:Yesterday is just a memory,Tomorrow we may never see
Please remember to mark the replies as answers if they help and unmark them if they provide no help -
GPMC problem: Item has already been added. Key in dictionary: "Key being added:"
I have the following scenario:
I use the Hungarian Windows 7 Professional 64 bit OS
I use the Group Policy Management Console (GPMC) to connect to a domain controller in a domain environment.
I try to generate a report for a Group Policy object (GPO) in the GPMC window.
In this scenario, I experience the following issue:
I cannot generate the report. Additionally, I receive an error message that resembles the following:
Item has already been added. Key in dictionary: "Key being added:"
I found a KB article for this symptoms:
http://support.microsoft.com/kb/2254754
I downloaded the following hotfix to my system:
Package:
KB Article Number(s): 2254754
Language: All (Global)
Platform: x64
Location: (http://hotfixv4.microsoft.com/Windows%207/WindowsServer%202008%20R2/sp1/Fix321583/7600/free/415811_intl_x64_zip.exe)
I unzipped the hotfix. When I started the msu package with my administrator user, the package says the following:
The update is not applicable for this computer.
I got the following in my event viewer:
System
- Provider
[ Name] Microsoft-Windows-WUSA
[ Guid] {09608C12-C1DA-4104-A6FE-B959CF57560A}
EventID 3
Version 0
Level 2
Task 0
Opcode 0
Keywords 0x8000000000000000
- TimeCreated
[ SystemTime] 2014-09-10T06:31:58.153372600Z
EventRecordID 2117
Correlation
- Execution
[ ProcessID] 823116
[ ThreadID] 822724
Channel Setup
Computer *******************
- Security
[ UserID] S-1-5-21-1957994488-1606980848-682003330-*****
- EventData
UpdateTitle
ErrorCode 2149842967
ErrorString
CommandLine "C:\Windows\SysWOW64\wusa.exe" "C:\Temp\d\Windows6.1-KB2254754-x64.msu"
Please help me to solve my problem.
Thanks in advance,
Laszlo FarkasI don't understand, what do you mean tweak the XML for the filterfile version entry.
The GPO is the Default Domain Policy. Our AD functional levels (forest, domain) are 2012. If I started GPMC on the domain controller then I do not receive the "Item has already been added..." message, I can open the report succesfully. Our domain
was on 2003 level before the migration, but we had the same problem ("Item has already been added...") on Win 7 clients, but on DC with Windows 2003 works well.
GPMC logging logs the followings when try to open Default Domain Policy on Windows 7 client:
gpmgmt.log:
[371c.41c4] 9/10/2014 14:32:21:926 [WARNING] CGPMReport::GenerateReport :ConvertToXml/Html failed with 0x80070057.
[371c.41c4] 9/10/2014 14:32:21:936 [WARNING] CGPMReport::GenerateReportFromGPO : GenerateReport failed with 0x80070057
gpmgmtManaged.log:
Reporting(16568.3)14:32:21 GPO::ConvertToHtml:******The following exception occured:
*******Message : Az elemet korábban már felvették. Kulcs a szótárban: „Felhasználói jegy maximális élettartama”; Felvétel alatt álló kulcs: „Felhasználói jegy maximális élettartama”.
*******StackTrace :
System.ArgumentException: Az elemet korábban már felvették. Kulcs a szótárban: „Felhasználói jegy maximális élettartama”; Felvétel alatt álló kulcs: „Felhasználói jegy maximális élettartama”.
a következő helyen: System.Collections.SortedList.Add(Object key, Object value)
a következő helyen: Microsoft.GroupPolicy.Reporting.Html.Settings.TablePolicySectionTemplate.SetPolicies(IEnumerable policies)
a következő helyen: Microsoft.GroupPolicy.Reporting.Html.Settings.Windows.Security.SecurityTemplate.AddAccounts(AccountPolicy[] policies)
a következő helyen: Microsoft.GroupPolicy.Reporting.Html.Settings.Windows.Security.SecurityTemplate.AddSettings(GPOExtensionData securityExtension, GPOExtensionData ipsecExtension, GPOExtensionData saferExtension, GPOExtensionData pkExtension,
GPOExtensionData wlanSvcExtension, GPOExtensionData dot3SvcExtension, GPOExtensionData napClientMgmtExtension, GPOExtensionData firewallExtension, GPOExtensionData auditExtension, GPOExtensionData srpExtension)
a következő helyen: Microsoft.GroupPolicy.Reporting.Html.Settings.Windows.Security.SecurityTemplate.SetSecurity(GPOExtensionData securityExtension, GPOExtensionData ipsecExtension, GPOExtensionData saferExtension, GPOExtensionData pkExtension,
GPOExtensionData wlanSvcExtension, GPOExtensionData dot3SvcExtension, GPOExtensionData napClientMgmtExtension, GPOExtensionData firewallExtension, GPOExtensionData auditExtension, GPOExtensionData srpExtension)
a következő helyen: Microsoft.GroupPolicy.Reporting.Html.Settings.Windows.WindowsSettingsSectionTemplate.CreateSubsectionTemplates(ArrayList subsections, Hashtable nameExtensionMap)
a következő helyen: Microsoft.GroupPolicy.Reporting.Html.Settings.Windows.WindowsSettingsSectionTemplate.SetWindowsSettings(IEnumerable extensions)
a következő helyen: Microsoft.GroupPolicy.Reporting.Html.Settings.MainSettingsSectionTemplate.SetConfiguration(IEnumerable extensionDataList)
a következő helyen: Microsoft.GroupPolicy.Reporting.Html.Settings.ConfigurationSectionTemplate.AddContent(IEnumerable extensionDataList)
a következő helyen: Microsoft.GroupPolicy.Reporting.Html.Settings.ConfigurationSectionTemplate.SetConfiguration(GPOUserOrComputerConfig config)
a következő helyen: Microsoft.GroupPolicy.Reporting.Html.Gpo.GpoReportTemplate.SetGpo(GPO gpo)
a következő helyen: Microsoft.GroupPolicy.Reporting.GPO.ConvertToHtml() -
Users cannot access SharePoint items after being added to a group.
When chaning membership of a SharePoint group that has item level permissions, the users in the SharePoint group can no longer access the items. I have a group that has low contributor/low modifier permissions on an item. When adding a new
user to the group, the existing members and new members can no longer access the item.Hi Clem,
Let's verify your issue:
When a new item was added, you set permission to the group via workflow. Then when you added a new user to the group, the permission at the item level for the group was removed. Is it right?
How did you design your workflow to set permission to the group? Which actions did you use? Please provide more information about your workflow to reproduce this issue.
In addition, after you added a new user to the group, go to the item level permission page, check whether the group has permission to the item.
Best Regards,
Wendy
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Wendy Li
TechNet Community Support -
hi all. i just downloaded mountain lion and it seems to have added an old password for admin at the start up, the old password was removed so all i had to do was press enter and off i go, i cant remember it, what to do now??
Eli,
You can reset a Password (lost/forgotten) set on your Mac using 'Reset Password Utility' available with OS X Utilities tool. With OS X Mountain Lion, OS X Utilities tool can be generally found on a local hidden Recovery HD Partition if your Mac has one.
To check If your Mac has got a local hidden Recovery HD Partition, start your Mac holding COMMAND + R buttons. If you hold the keys pressed enough and there is a local Recovery HD Partition on your Mac, you will be presented with OS X Utilities window.
Click the 'Tool' menu item and choose 'Reset password'. Terminal window appears. Type 'resetpassword' into it and press 'Enter'. Reset Password window appears with User Account Names available on your Start-up Volume. Select the User Account Name and rest is simple to follow.
One of the advantages of this method is that it does not require any Authorization method such as administrative authentication to reset a password.
NOTE: If your Mac does not have a local hidden Recovery Partition on its system disk, you can create one using Disk Assistant application available from Apple. Search for the Disk Assistant in the support area. -
Sync Space Problems as removed apps being added back
I had a problem with the original laptop in which I had itunes on so I haven't backed up or sync'd my phone for over 6 months. I finally got around to moving the itunes file to another computer. Now when I try to sync my phone it is trying to add the apps back that were deleted off the phone but were still on the last time on itunes backed up of the phone. So now the Apps are being added back and before it can complete the sync it runs out of space and cannot complete the process. Help how can I get around this, thanks.
You'd think that deleting an app from your iPhone and then syncing the iPhone would tell iTunes that you don't want that application on your iPhone any longer - but that isn't what happens. iTunes is your home base for applications and media. You have to tell iTunes what you want added to your iOS device or removed from your iOS device.
My habit is to connect my iOS device and immediately select the option to sync newly purchased items from the device to iTunes. Once that's done I select my device in iTunes and look over the applications and media to see that everything I want/don't want is correctly indicated. Then I sync again.
Step 1 gets all the updated and newly purchased stuff into iTunes. Step 2 makes sure I get only what I want (and exactly what I want) on my device. -
Hello,
My old emails address which I have used as my apple id for 10 years is being made redundant. I have changed the email address to a new gmail one and this is my new apple id. But my iMac has not recognised this. It keeps saying it wants the password for my old email address. I have seen some advice on these forums which suggest signing out of iCloud and then back in again. But when I start doing this it asks me if i want all the photos deleted that have not been downloaded onto the mac.
I have had an iCloud account for quite sometime and I'm afraid of losing everything in my cloud if i sign out and sign in with a new id.
Is this fear realistic?
I know I can change back to my old email, sign out and then sign in wight he new one...
Please help!This did not work for me. My old email account for iCloud still pops up on my screen every time I open my macbook. I've deleted it, reset it, every thing I can think of and it still shows up. I think six months of this is more than enough time to wait.
RDG -
Every single website url address, or url address within a website page is being added to my location bar/address bar drop down menu.
I don't want everything added or saved in the location bar. Only urls that I used a lot used to be saved there but now every single url (and url within a url)I visit is being added to it.
How can I stop this? This just started happening.
I'm sure it's a simple browser setting but I've checked and nothing gives an option to control this.
Firefox 3.0.17
Windows XP
== User Agent ==
Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.9.0.17) Gecko/2009122116 Firefox/3.0.17A possibility is to open the links via the right-click context menu or a middle-click in a new tab to make sure that Firefox sees them as regular links.
-
I updated to the new iTunes last week. Today I plugged in my 4th generation Shuffle to add some new songs. The shuffle appears in Devices, but when I try to add songs, I'm not getting the progress bar at the top of the screen, so I'm assuming the song isn't being added. I tried ejecting the Shuffle and plugging it in again, and I got a message that my iPod needed to be restored before it could be used with iTunes -- even though the screen also said the Shuffle is up to date on the software. I finally gave in and restored it, but I continue to get the same message. When I eject the iPod and try to play it now, I'm getting nothing, and when it is connected to the usb port, the orange light is continually flashing. I've been trying to figure this out for about 3 hours now, so if anyone could help me, I'd be eternally grateful!
The 1st and 2nd gen shuffles do not have an automatic syncing mode, like later shuffles and the "big" iPods. It is maintained manually (or by using the Autofill feature).
If the iTunes sidebar (along left side of window) is hidden, from the menu bar, under View, select Show Sidebar. The shuffle appears in the sidebar, under DEVICES, when connected.
To add songs to the shuffle... Show a list of songs in the iTunes window. For example, you can select Music under LIBRARY (in the sidebar) to show your complete iTunes music library list. Select a song and drag it to the shuffle in the sidebar. You can do this with more than one song selected. Alternately, select the song(s), right-click the selection, and choose the command to Add to Playlist -> [name of iPod].
To remove songs from the shuffle... Select the shuffle in the sidebar. To the right, it's Settings screen is shown. Toward the top, where it says Settings, click on On This iPod (to the right). The list of songs on the shuffle is shown below. Select the song you want to remove and press Delete on the keyboard. You can do this with more than one song selected.
NOTE: At the bottom of the shuffle's list of songs, there are controls for the Autofill feature. You can also use Autofill to fill your shuffle from your music library or from a specific playlist. -
I recently added my old mac hard drive to a new macbook with an SSD as my main OSX drive. I am having trouble with permissions in viewing my old hard drive, when I save a permission when I reboot the full access is changed again . What is the best way to get complete access to my old hd installed in my new Macbook?
Open the Get Info window for the old drive. Click the Lock icon on the bottom of that window and type in your password. In the permissions area click the Plus sign ( + ) and Add your Username to it and set it to Read & Write. Close that window. you should now have full access to all the files.
-
Hi Guys
when we install an Application in windows 8 family, we see that in addition of Application executable file, user manuals (.chm) and PDF & other files related to that App are added to start menu (when we click down Arrow which shows all programs) and
so the start menu gets quit messy.
is there any settings to make only applications executable file be added to start menu & prevent other types of files related to that App being added here?
thanks in advancedHi John,
This issue is related to the programs package we installed.
• An installation package contains all of the information that the Windows Installer requires to install or uninstall an application or product and to run the setup user interface.
• The developer can specify installation context, and based on these properties, Windows Installer automatically redirects the values of folder properties and registrations to locations.
• The shortcut is added to the profile by these context
We could right click these file and could find out they are the shortcut mentioned above.
For more information about Windows Installer, please refer to the following article.
http://msdn.microsoft.com/en-us/library/windows/desktop/dd765197(v=vs.85).aspx
Best regards,
Fangzhou CHEN
Fangzhou CHEN
TechNet Community Support
hi Fangzhou
useful link
thanks a lot -
how to transfer info to a mac book pro from a pc i need to get my iTunes and other iTunes related items off of my old computer so i can sync my phone and get my music.
I have already tranferd some info to an external hard drive i just need to get my itune items. also i have heard if you plug your phone to a differnt computer you lose of you information.
i need help please.The tv is a extended display on your mac like a second moitor you want to mirror them (same thing on both)
This should help you
Maybe you are looking for
-
i have succesfully installed macromedia flash player on my windows xp service pack 2 computer. but some websites i still can't access. most websites have worked perfectly but a few are not. if anyone has some helpful information it would be greatly a
-
Hi Experts - How does the Bank Control key(BKONT) entered in the vendor master affect the Direct Deposit output file. Can we specify '01' and send it to the checking account or '02' and send it to the savings account. Doesn't work in our case. Any in
-
How do i reset my passcode- a friend of my daughters put in a code, and we dont know it
how do i reset passcode to get into ipod?
-
App manager crashes! How to download Muse?
Hi there, Adobe application manager cannot be convinced to survive more than two seconds on my computer. I am running Cs6 Design and Web Premium. All programs but app manager are running as they should. the error message is below. No help from Micros
-
5850 blackscreen - help please
Posted elsewhere, but as the card is made by MSI, maybe someone here knows the cause/solution I have a msi 5850 twin frozr, and am really struggling to install a recent driver. Much of the blame was put upon having an nvidia card previously, but a cl