PO Lead Time Standard report

Hi Experts,
Do we have Standard report to monitor PO Lead time. (Time taken by Vendor to fulfill the Order)
Regards,
Jackie

Hi,
You can use the report MC$K to check the delivery date vairance for the vendor with respect to material delivery.
The delivery date variance is calculated with respect to PO Delivery Date and GR Posting Date.
To execute the report, the delivery date variance needs to be defined in transaction code MCFC at Purchasing Org. level.
Regards,
Bijoy Kumar

Similar Messages

Report Supplier Lead Time - Days

Hi All,
Can anybody give me the characters, key figures, CKF's, RKF's and other fields that are usually used in Supplier Lead Time - Days Report in general irrespective of the requirement.....come up what ever you remember from your side.
Thanks All,

Nevermind

Re: report for lead time of material

Dear Gurus,
I just want to know is there report to see the lead time of material. Kindly suggest me which is the t-code available
Regards,
Rajashekar

Hi,
You can see the lead time in Report- MCE7 (T Code) for material analysis, here yo will get lead time delivery time of material as per Material group, Vendor,purchase Org. If you want to get material number ,after results displayed choose from menu settings > characteristic display > key & description (or just key) , then
choose from menu settings > column width and extend the length to e.g. 59 (18 material number + space + 40 description)An alternative way is building query taking into consideration Table MARC. Thanking you.

PO lead time report

Hi Gurus
What report can be run to provide the average time taken from PO creation to Goods reciept? IE how do we measure actual delivery lead time
Thanks in advance
BR

Hello
Thanks for reply.
IF this is not , could you pl let me know the correct procedure and any standard report for measuring the Delivery time for Purcsase Order based on materials.
As per your exnample , why a person should enter the delivery date manually , it should should come by system based on PDLT maintained ..
for tht reason only we are looking to review our materials to update correct PDLT.
thanks..

Lead Time Demand on REORDER POINT REPORT ??

Hi ALL,
Hope you all doing greate , I am very new in Re order point Inventory Planning Method. I have done all the configuration as;
i - Creates an Item and assign it to the specific IO where I am selection the Planning method as Reorder point and enter the other paramters under the lead time tab I am seleting the total lead time as 5.
I have define safty stock as 100 quantity.
I have configure the Forecast Set and forcast under it which contain an Item with Current Quantity is 1000 now I have call the Report to run so I am getting the rest of the thing except value Lead Time Demand ??
kindly help me in this regards, I would be so kind of you.
Thanks
Mohammad Younus

Hi,
There is a standard report that shows the actual average LT compared to the master data definitions. You can also see the details, and even update master data automatically if you want; WPDTC.
Regards,
Mario

Production lead time report

Hi,
Given below mateiral with their lead time activity
Material A- Finish (in house prodn)
100 qty = 10 days
Low level in BOM
X- Halb (2 days)
Y-Roh (10 days)
Z-Traded goods (2 days)
Is there any report available which provide the information, if i want to plan mateiral (finish) with what period it is possible to fulfill the customer requirement. Considering all procurement and production activity.
Regards,
Rajesh

Hi Rajesh,
There is no standard report available for the leading time of FG with BOM multi levels. You can go for a Z report.
thanks and regards
Murugesan

Lead time Report

Hi,
Would like to have a report on Lead time between PO Date & GR date.
Ideally the report should show the PO Number, Date,Material, Mat. Doc Number & GR Date.
Though ME80FN shows by clicking the PO history, But our user would like to have in a single line item.
Is there any other Standard Report to get the above data?
Regards,
Vengat

Hi,
There is a standard report that shows the actual average LT compared to the master data definitions. You can also see the details, and even update master data automatically if you want; WPDTC.
Regards,
Mario

Contract renewal lead time in standard sap?

Hi,
I need a report which can tell me per material (contract based), what is the lead time to renew the contract? Average consumption in production taken into account!! Case:
contract quantity 1000 PC
average consumption in factory over the past 4 months : 50 PC.
contracl renewal lead time 4 months.
Actual stock level is 400.
I assume a lot of purchasing people like to have such a report, but does it exists in SAP or does any body have a clue where to look?
Does anybody have the same experience, that this report is missing in SAP? Or do I really need (as proposed solution) work with queries?
Best Regards,
Eric.

Dera Eric,
It seems like you combine between Purchasing data and inventory data, so you need to custom a report that meet your detail requirement for 1 preview.Or you can run several SAp standard report and combine it in excell or you can use SQVI.

MM Report for Reorder and lead time

Hi,
Can anyone suggest me a report that can show information by materail such as min./max. quantity, re-order or safety stock, and replensihment lead time.
Thanks
Atif

you can create the query using MARC or just go se16 adn enter the MARC table and pull the data.\
Displayed Fields:   8 of   8 Fixed Columns:                2 List Width 0900
Material             Plant Reorder Point     Safety stock      Min. lot size     Max. lot size     Total RL time Min SafetyStock
MATERIAL            Z001               0.000             0.000         5,000.000       350,000.000   0                       0.000

Lead time values are not appearing in the report for current year.

Hi friends,
Iam checking a report in production. where lead time values are displayed as 0 for 1 key figure lead time3 (w/0 dim) . i found there is a formula for this it shows like NODIM ( 'Lead Time 3' ).and there is a value for cal.lead time
how can i get values in the report.
Thanks ,
VRV.

Hi,
Although your question is not clear, I understood that the formula built on that KF is NODIM. Basically it means, units of measurement is not considered when calculating.
Eg: 5 Minutes + 5 Kilograms = 10
You please try to analyze your KF by the above logic. Then you would be able to figure out why the data is not appearing in the report..
Assign if helps...
Regards,
Suman

Foreground job - Standard report - Time out error

Hi,
I have a standard SAP report which is executed from portal and the report is failing in the foreground with a time out error. As there is time set for foreground process and probably the volume of the report is big which is not good enough to execute in the foreground time frame.
The customer wants to run it only in the foreground and does not want to schedule in the background and the reason being he wants to do some customization on the columns when the report is displayed back on the portal screen.
Now my question is there any other option to get the requirement and increasing the foreground time is ruled out by Basis team.
I was thinking if I can use a wrapper report on the standard report and include SAPGUI_PROGRESS_INDICATOR to keep the connection between the dialog and the presentation server going without dis-connecting. Is this a better option and I am not sure if it will work ?
Please let me know if any one else has resolved such issues earlier.
Regards
Praneeth Kumar
Edited by: gansprasan on Sep 20, 2011 2:07 PM

Hi,
Though it is not advisable to change max run time... if need you you consult with your basis and you can change run time dynamically in your program and reset to original. I agree even CL_gui_timer class wont help.
you can check below link.. handle it carefully..
[http://help.sap.com/bp_bw370/documentation/How_To_Change_the_Maximum_Dialog_Runtime_of_a_Process_in_NW2004s.pdf]
data: old_value(100).
CONSTANTS: parameter LIKE tpfet-parname
VALUE 'rdisp/max_wprun_time'.
CALL 'C_SAPGPARAM' ID 'NAME' FIELD parameter
ID 'VALUE' FIELD old_value. " old_value will have value set by basis.
IF sy-subrc <> 0.
RAISE not_found.
ENDIF.
use FM TH_CHANGE_PARAMETER to change value. Again reset the value with old value..
Regards,
Ravi.

Material report showing lead time & min order quantity?

Hi,
Is there a report which I can download which shows by material, the lead time and minimum order quantity?
Thanks
Keeley

We don't have access to any query writing so if it's not possible to get both fields on one table, can I run two reports?
OR...
is it possible to change the ME1M report to display/export horizontally in a table type format rather than wrapped?
Edited by: Keeley B on Sep 23, 2009 7:58 AM

Displaying leading spaces in a Standard Report Column

Is there a way to display leading spaces in a standard report column in APEX?
I am using the following hierarchy query to left pad the metric title with spaces to indent subordinate records. The problem is that the APEX report truncates the leading spaces when the data is displayed.
I have replaced the spaces with an underscore, however the end users prefers white spaces for readability.
Any help is greatly appreciated.
SELECT
t.group_id,
t.metric_id,
LPAD(' ',(LEVEL - 2)*5,' ') || d.metric_title metric_title,
d.business_unit,
get_name(d.data_owner) data_owner,
d.metric_status,
t.group_sort
FROM tbl_health_metric_groupings t JOIN tbl_health_metric_definition d ON t.metric_id = d.metric_id
WHERE t.group_id != 0
START WITH t.group_id = 0
CONNECT BY t.parent_group_id = PRIOR t.group_id
ORDER SIBLINGS BY t.group_sort, d.metric_title

Thanks Tony your comment got me pointed in the right direction.
LPAD only pads a single character to the left so doing something like LPAD(' ',(LEVEL -2)*5,' ') does not produce the expected results however placing LPAD inside a replace function does...
The following works as expected and places leading spaces at the begining of the metric title based on the hierarchy:
SELECT
t.group_id,
t.metric_id,
replace(LPAD(' ',(LEVEL - 2)*5,' '),' ',' ') || d.metric_title metric_title,
d.business_unit,
get_name(d.data_owner) data_owner,
d.metric_status,
t.group_sort
FROM tbl_health_metric_groupings t JOIN tbl_health_metric_definition d ON t.metric_id = d.metric_id
WHERE t.group_id != 0
START WITH t.group_id = 0
CONNECT BY t.parent_group_id = PRIOR t.group_id
ORDER SIBLINGS BY t.group_sort, d.metric_title

Run time error in all standard reports

Hi
Gurus
I got a run time error in all standard reports and error as below.
Unable to fulfil request for 8296200 bytes of storage space.
What happened?
Each transaction requires some main memory space to process
application data. If the operating system cannot provide any more
space, the transaction is terminated.
plz reply urgently.
Thanks in advance
Regards,
sarang

hmmm well reports work with variables and internal Tables.
Those use memory. to be more specific RAM.
in your case there would be about 8 MB of Memory needed, which you aint got.
The problem may be that there just isnt that much available, or that one dialog work process is limited to some number below that.
in anyway like all my precedessors told yah, contact you basis guys to check whether this is a problem or not.

Target and Actual Lead time in MCP1 report

Dear Experts,
In MCP1 report, what is Target Lead Time and Actual Lead Time. How it is calculated?
Thanks in advance for your valuable replies.
Regards,
Jejesh

Hi,
                                                                                Target lead time
On the operation level, it is the time period between the scheduled
    input date at the work center (target input) and the latest scheduled
    finish of the operation.
The target input date is calculated through the scheduled execution
    finish of the previous operation.
On the order level it is the time period between the scheduled start and
    the scheduled finish.
and
                                                                                Actual lead time
At operation level, the time between the input date at the work center
     and the completion confirmation date (the total from queue time,
     execution time and move time).
When calculating, the input date is determined via the completion
     confirmation date of the preceding operation. The process-dependent
     wait time of the preceeding operation is subtracted.
At order level, the time between the reported start date and the finish
     date (the total from execution times and transit times of the operations
     as well as the order floats before and after production).
Regards,
Rajesh

PO Lead Time Standard report

Similar Messages

Maybe you are looking for