PO Line Item Mass Deletion

Dear SAP Experts,
Using MEMASSPO for PO Line item deletion, can you please tell me the step by step way?
Thank you very much for the help.
Zhie

Hi,
Enter the t.code MEMASSPO, select the EKPO table and select the field tabe and select the fields MASSEKPO -LOEKZ (delition indicator for po line items) and executte.
Now ssytem will ask the PO range...enter the PO's and execute.
enter the TO value as X and populate the X for all the records by using "Carryout mass change" Icon
And Save.
It will work 100%.
IF PO has GR/IR menas system will not allow to flag for deletion for that line item.
Thanks,
Kumar Arcot

Similar Messages

  • PO line items are deleted but showing as commitment in S_ALR_87012999

    Hello All,
    in one PO all line items are deleted but still in "Report output for S_ALR_87012999 Orders: Actual/plan/commitment", it is showing commitment against the PR.
    Any pointers on this will help
    Thanks & Regards,
    Prashant

    Hi,
    Report RKANBU01 resets commitments on orders and ranges of orders.
    (please see the note 152571).
    Reports ZKAOIDE0 & ZKAOIDE1 removes commitments which refer to purchase orders and purchase requistions which do not exist.
    (See Notes 100409 & 152571).
    Report RKACOR04 corrects mistakes between total and line items in database tables.
    (See notes 21649 & 152571).
    regards
    Waman

  • Sending notification to SRM requester when a PR line item is deleted in R3

    Hi SDN,
                  my requirement is that whenever a line item in PR created in R3 system is deleted  ,a mail notification should be sent to the requester along with the item number and quantity that has been deleted.
    is there any BADI/EXIT for this scenario??
    Help me in this regard,will reward points for the best answer.
    Thanks in advance,
    suman

    HI imthiaz,
                 Thanks for your reply,but can u give me the detailed ie,step-by-step procedure to achieve my requirement as i am new to SRM environment.I will be grateful to u for your favor regarding this.Please do reply me as its on urgent basis.
    regards,
    suman

  • Line items getting deleted

    We have extended classic scenario, and once we create a purchase order from a Requisition , it gets created correctly at SRM side, but as it is replicated in R/3, the line items just vanish.. I tried checking that in BBP_PD_PO_TRANSFER_EXEC, the item internal table is empty..
    everything is fine as i check BBP_PD, I have run CLEAN_REQREQ_UP and BBP_GET_STATUS_2
    Any clue whats happening...

    Hi,
      See the foll notes:
    Note 1022458 - Limit PO ends in Error Status: Document Contains No Items
    1052999 - Deleting Service line item in SRM not updated in ERP
    006573 - BBP_POC:For service items,delete indicator not transfered
    BR,
    Disha.
    Pls reward points for useful answers.

  • Line item get deleted in PO & PR.

    Hello,
    We are facing issue in posting the goods receipt in MIGO,
    since the line items in the Purchase Order is getting deleted automatically and
    in turn Purchase Requisition Number is deleted.
    What are the probable reason for thie?
    we have checked everything but didnt find solution?
    Thank you in advance
    Regards,
    Tina.

    Tina
    Can you used PM Module in your company.
    When a Purchase Requisition (PR) is created from PM order using control key PM03 after approval of PR, Purchase Order (PO) is issued. After completion of maintenance job and acquiring services or material procured against PR which has been created from PM order, PM order is Technically completed. When order status is set as TECO, PR got deleted. This behavior of deletion of PR when order is TECO
    This is standard behaviors in the PM/CS order As Of My Knowledge can you used PM Module in your company

  • Time sheet line item should delete it

    Hi gurus,
    While entering in CAT2 working hours is wrongly entered and approved it and saved.  later on they found out it was wrong. Actually their are 4 line items, in one item should change the working hours. Is it possible? or we have to delete it.
    Now it showing gray, how can we change the figures.  if anybody faced the same problem please let me know the solutions
    thanks in advance
    jaya

    Hi
    Once you release the time sheet, you can not change it.  It will be in display mode.
    One way is to ask your Manager to reject it, and then it will again come back to you for doing changes.  At that time you can change.
    Please reward points.
    Regards
    Venu

  • Time sheet line item should delete it day hour

    Hi gurus,
    While entering in CAT2 working hours is wrongly entered and approved it and saved. later on they found out it was wrong. Actually their are 4 line items, in one item should change the working hours. Is it possible? or we have to delete it.
    Now it showing gray, how can we change the figures. if anybody faced the same problem, its very urgent please let me know the solutions
    thanks in advance
    jaya
    Edited by: jaya sa on Jun 12, 2008 2:19 PM

    closed

  • User exit which gets triggered when a line item is deleted in va02

    Hello all,
                   I am unable to find a User exit which gets trigerred when i delete a line item from va02.If I use the User Exits for saving data in Include MV45AFZZ the screen field VBAP-POSNR for line item is not getting accessed.All i need to compare the line item texts. Which means if any of these texts change then i need to write my logic. But the screen field name for all the texts is the same.Please guide me.

    Hello,
    Whever you perform any actions on the line item, we have the user exit in MV45AFZZ, userexitxvbap. Whenever the the item is deleted the UPDKZ value in XVBAP value is set to 'D', else since you are using the transaction VA02, any change is recorded in YVBAP(for old values) and XVBAP(for new values), so using this two internal table you can write any necessary logic.
    BR
    Sudhakar.

  • Exit for va02 when line item is deleted

    Hi,
    I have requirement that in va02 when an item is selected and '-' (delete) button is pressed, it  should display error message :To enter reason for rejection" and not to delete the item.
    Can anyone help with what enhancement can be used user exit or something else. If user exit then which one to be used a i have tried several.
    Versio used is ECC 6
    thnks.

    put  debugger on .. search for an implicit enhancement whenever delete button is pressed..
    check for the tcode if va02 . then check for the ok_code for deletion..
    call a function module in that call a screen with i/p field on which user would type the reason..
    If you can display the reasons which are pre defined then you can use RS_VALUES_BOX function module and store the pre defined reasons in a Z table.

  • 2LIS_02_ITM deleted line items are not reflected in BW

    Hi,
    Our current Data flow 2LIS_02_ITM-->DSO-->CUBE.
    I am analyzing a Invoice, When it is created 01.04.2014 it has got 10 Line Items and all the data is load to BW,Invoice with 10 Line items.
    In ECC I can now see the same Invoice only got 5 line items and from change log I can see 5 line items are deleted on 15.04.2014.These changes are not reflected in BW.In BW invoice data still shows 10 line items.
    If I perform setup table job and ECC RSA3 for that invoice I am getting only 5.
    I believe it’s something to do with 0RECORDMODE,Can you please let me know how to fix this in BW.
    Thanks

    Yes this is a known behavior in case of deltas.
    For Deleted line items Rocancel field will have an entry with R.
    To handle this you need to map ROCANCEL field in Technical group of transformation (Between Datasource to DSO) with 0Recordmode.
    Once you will do that then after activating the data in DSO it will nullify the records and deleted order or item will not appear.
    Regards,
    AL

  • Restrict deletion of sales order line items

    Hi,
    I need to restrict deleting of sales order line item, I think we can use the user exit, MV45AFZB, USEREXIT_CHECK_XVBAP_FOR_DELE.
    But when i set the flag to 'X', even though it does not delete at tht instance when the sales order save is clicked again the line item gets deleted.
    ANy idea , to prevent that?
    Thanks
    Keshi

    Hi Keshi,
    That is the correct exit, we are using the same without any problem. Just set US_EXIT  = CHARX.
    Regards,
    John.

  • Cannot delete line item from sales order

    Hi Gurus,
    Need your expert helo for the following issue :
    A sales order was created in CRM with 3 line items, the first and 3rd line item being the same.The order was successfully replicated to ECC.Now on the CRM side the 3 rd line item was deleted and another item was entered which doesnot exist in the system.The system gave 2 errors indicating that the item doesnt exist in the system which is valid.Now when we are tryng to delete the line item(3rd item which doesnt exist in the system) the system doesnt allow it .If there were any subsequent docs for this order it would make sense that order doesnt allow any changes on the CRM side but there is no delivery doc created yet.
    Seems like the order is in some confused state.Can you please suggest what can be done to make sure that line item 3 can be deleted and changes on CRM side reflect to ECC.
    your suggestions will be greatly appreciated.
    Will reward with points.Thanks in advance.

    Hi Venkat,
    I think once you create order..system will not allow you to delete the line Item completely. Now do one thing open a sales order and try to delete the line item..it will not delete it. But if you go to status column of same line item...it will show the status as 'rejected'. This means that order is not placed for that material. And the requirement will not be shown in APO. This is as good as deleting the line item completely.
    thanks
    Kushal
    reward points if help

  • Delete a line item from Sales Doc type RE

    Unable to delete a line item from a sales order linked to document type RE.  Get a long runtime - no specific error message.  Use the 'Stop Transaction' option to end the transaction.
    Have done thorough testing and can delete line items linked to all other sales document types in our system.
    Researched SPRO to see if there was a line item deletion option that was not created for sales doc type RE - but can find nothing.
    On a critical time line here - this was discovered during Hotpak installation testing which is scheduled to move to PRD June 22.  Question as to why we have not run across this issue before now??  - I don't think we have had an occasion to delete a returns line item before - but I want to have the option if available.
    Any help to resolve this issue would be appreciated.
    Regards
    Patsy

    Thanks for your response.
    After creating document type RE, execute VA02 transaction, select line item, select delete line item icon.  The system goes into runtime and just stays there.  No error message, no abap dump.  To escape the transaction, I have to select 'stop transaction'.
    I have tested all other document types we use in our system,  (including our customized transactions) SO, CR, DR, etc., and the system allows line item deletion.

  • PO Release Strategy not changed after deletion of few line items with less

    Subject : PO Release Strategy not changed after deletion of few line items with less Total PO
    Dear Friends
    We have issue with PO Release strategy. We have created the PO. with release strategy  with multiple approvers.  After approval of first approval manager , one of the PO line item got deleted and Total PO value is reduced . The new PO value should have changed the PO release strategy. But it is not changed. Old release strategy only showing in the PO which is wrong. 
    Details of the PO
    PO no 4500000123 with 5 line items Total PO value : 100,000 USD Release strategy : AB
    PO line item 5 deleted. Now total PO value changed to 50,000 USD and the PO release strategy should have been changed to AA but not changed. Still showing PO release strategy AB only.
    Are there any OSS notes available to correct his bug.
    Please let me know if you need more details
    Thanks in Advance
    Thanks
    MVS

    Hi,
    release indicators  change it to 4.It may works. Please explore to all 6 indicators..........
    i.e,
    1-cannot be changed
    2-changable,no new determination of strategy
    3-changable,new release in case of strategy
    4-changable,new release in case of strategy or value change
    5-changable,new release if new strategy/outputted
    6-changable,new release if new strategy or value changed/ outputted......
    And check   Characteristic description and value in Classification  of Release strategies ........
    I hope this will help you. Thanking you.
    Regards,
    Venkat.

  • Delete of Element in Form for COPA line item report

    Hello
    I would like to change a form used for a COPA line item report - delete an element, which has been included for years. Unfortunately I got message, that 'You cannot delete, because element xxx is dependent'.
    If I insert a new element if have no problems to delete it afterwards.
    Can anybody help me?
    Thanks in advance.
    Best regards
    Søren Kirch
    LOGSTOR A/S

    Hi,
    To my knowledge, you cannot delete the element until you assign the new one in the form if only single element is assigned.
    In case anymore element is there, there can be possibility this element is taken into consideration for making formula.
    Regards,
    Harish

Maybe you are looking for