PO Line Item with Open Quantity

HI all,
How should i select a PO line item with Open Quantity? Is it possible to post GR for a PO which is set for Delivery Complition but still has Open Quantity ..
please help me how to check for OPEN QUANTITY.
Thanks,
Ravi.

Hi all,
Thanks for your answer, but can you be some more specific on what calculations need to be done.
I need to Post a GR for all PO where PO line items have Open Quantity.
Thanks
ravi.

Similar Messages

  • Vendor Line item with Opening and Closing Balances report regarding

    Dear All,
    I need a report for vendor line items with Opening and Closing balances.
    Thanks in advance
    Sateesh

    Hi
    Try S_ALR_87012082 - Vendor Balances in Local Currency
    Regards
    Sanil Bhandari

  • Unable to delete line item with 0 quantity in Invoice.

    Hi Experts,
    I came across a Invoice which reflects in VF04 as pending Billing due list. When i checked at the inter company Invoice i came across a line item with "0" quantity and price as zero, interestingly the replinishment cross company delivery document  for the same line item for "0" quantity had a Batch assigned to it.
    Now the issue is cusotmer has selected the line item with XX quantity and have selected the accounting document to be generated but the line item with "0 was left over and now still reflects in VF04.
    Customer does not want to reverse the full cycle to resolve the issue since the document was created a year back.My Question  is can we get the line item with "0" quantity to clear accounting so that it will not reflect in VF04.If so what will be process to do that.
    Thanks in Advance to advice.
    Regards,
    Sridhar.R

    Hi,
    It is  not possible to delete this line item, you can discuss with your client and delete it from the table.
    And now coming to the reasons why it has come into the invoice & Delivery
    1. The Batch Item category must have been configured as relevant for billing...check this and make it irrelevant if the client does not do batch specific billing. --- This will stop the batches from coming into the invoice.
    2.  Check for the batch item category in delivery if Zero quanity is allowed...if it is allowed make it not allowed and make it an Error message, whenever there is a zero quantity system will give a message.

  • Sales order create/change line item with reference to contract - Open quantity not getting deducted for copied line item from the contract

    Hi friends,
    Please provide some valuable inputs for the following scenario:
    When a sales order line item is created(VA01) or changed(VA02) with reference to a Contract the open quantity is deducted in the contract which is a standard functionality. If the referenced line item is copied (custom enhancement to copy line item), then for the copied line item the open quantity is not getting deducted instead ATP quantity i.e. Available-to-promise is deducted.
    Any inputs on how we can fix this functionality i.e. deduct the open quantity from the contract for the copied line item?
    P.S. : Custom enhancement to copy line item is working fine, but open quantity is not getting deducted if the copied line item was referenced to a contract.
    Thanks,
    Sandeep
    Message was edited by: sandeep

    Sandeep,
    Yes, that was my original interpretation.  I was having a hard time believing that someone would ask such a question. 
    I guess, then, that you already know that you will have to add this logic to your enhancement. You should create your specifications and hand them off to a developer; ideally the one who created this enhanced solution in the first place.
    I do not provide advice in these forums about details of enhanced solutions.  Perhaps one of the other members will be more willing to do your work for you.
    Best Regards,
    DB49

  • Customer line items with balance carry forward no opening balance

    Hello FI Experts,
    We have ticket where the user is using a Z* Report for Customer line items with balance carry forward. In 31.01.2007 user has posted some legacy data, latter he was executing this Z* report then user can see the values posted on the same day (31.01.2007) as line items. But he was executing the report on 01.02.2007 then he was not able to see the line item as well as the values posted on 31.01.2007 as opening balance as on 01.02.2007. But if we run the report as on 01.01.2008 then we are able to see the values which are carry forwarded as opening balances. Did anyone have worked on this type of scenario?
    Requirement Here Is:  The values that have been posted on 31.03.2007 which are still open line items should get displayed as opening balance as on 01.02.2007.
    Thanks for helping on this issue.

    Hi,
      Any report will get data from Tables. Please check whether the table you have used to develop this report has opening balance.
    Balance will be carry forwarded only when you run the balance carry forward program. Check whether this was run for the date you have specified. This can be done in the year end.
    If you are checking in the middle of the year, then the balance will not be carry forwarded.
    Regards,
    B. Radhika.

  • Printout of Changed PO Line items with Quantity and value

    Hi SAP Gurus,
    I want to have the printout of  only those PO Line items with the change in Quantity and Value....
    How can i achieve this...
    Any config./ Developement...
    Plz. suggest....
    Rgds,
    Navin

    Hi,
    In config Purchasing->Messages->Output Control->Message Determination Schemas->Define Message Schema for PO, under 'Assign Schema to Purchase Order', if the 3rd indicator from the right 'New message determination process for change messages' is NOT selected, only changes are printed in the changed PO's.
    Are you using standard print program and SAPScript?
    Also under config Messages->Message Type->Define Message Type for PO->Fine-Tuned Control: Purchase Order, make sure you have operation '2' for PO output type.
    Phyllis.
    Edited by: Phyllis Waugh on Oct 10, 2008 6:40 AM

  • Report for G/L line items with both debit & credit posting accounts

    Hi,
       My client requires a G/L line items report. It can be possible thru fs10n or fbl3n etc. But he wants to see both the credit and debit accounts in the same line.
    for ex: if I open a expense account and show the report of individual documents, he wants to see the corresponding credit item to which bank/cash account it got credited to.
    we showed them to double click on that document and goto document overview. but they dont want in that way.
    they want to see all the line items with both postings in the same sheet for all line items.
    valuable replies will be fairly rewarded.
    thanks,
    chaitanya

    Hi,
    U can use the following TCodes...
    - S_ALR_87012287
    - S_ALR_87012289
    - S_ALR_87012291
    But i am not sure if your client will be happy...
    This is a very common req and the only solution possible is to have a customized report for the client..
    Hope its clear..
    Cheers
    Raghu

  • Asset Creation in PR and PO and MIGO as a single Line item with "N" qty

    Hi All,
    In Purchase requestion ME51N
    Now we are creating "n" number of assets ( All are same item but "s.no" will vary) with "n" number of line item.
    Instead of this I have to enhance to create only one line item( For same item) with "n" quantity.
    for the ASSET account Assignment we have to create Asset(Temp no) for the each item/quantity(if the same item).
    as well as if they are going to create a PO with ref to PR they have to see all the "n" number of asset no.
    In MIGO creation for each asset we have to assign S.No and Asset Tag.
    How enhance the functionality in PR,PO and MIGO as well as in Invoice.
    Is it any User Exit/BADI is available for PR/POand MIGO to show all the "n" number of assets for a single line item.
    Kindly help me to give details to proceed further.
    Thanks in advance.
    sharma

    Hi Sharma,
    What i understand from your question is, you want to create a single line item in PR and PO. But the qty would be > 1.
    Each single qty would have its own asset number in account asssignment tab of item details of PR & PO.
    This is what you are expecting...Right???????????????
    Then this is possible with certain limitations.
    While creating PR, enter only one item with more qty.
    In item details section, in account assignment tab, on top left corner, there will be a button called Multiple account assignments.
    Click on it, then it looks like a table, where you can enter more than one line. (each line will have its own asset no)
    And choose option Distribute on qty basis for field Distribution.
    So that you can enter 1 qty for each line. ( Ex: if you created one line item in the item level with 10 qty, you need to maintain 10 line here, each qith 1 qty and diff asset no).
    The only limitation to this is, the GRN would be treated as non valueted. So when you make GRN there wwould not be any accounting doc. ( means no use of GR/IR clearing account as like normal for POs)
    when you prepare MIRO, all the assets will be capitalised and vendor credited.
    But in case if you receive partial invoice, then you have choose manually in MIRO. which asset is ot be capitalised.
    After entering the PO number in MIRO, there will be one line will be appeared with full qty. in the same line, move till the end of line, there you will have one button called Account assignments.
    Choose and go there, here you can choose which individual asset line to be considired.
    This will resolve your issue.
    Thanks,
    Srinu
    SRBORIGI_MULTIPLE ACCOUNT ASSIGNMENTS

  • I have a problem regarding sales order line item with confimed quanity

    Hi Experts,
    I have a problem regarding sales order line item with confimed quanity with '0'  with delivery block but confirming the sales order quantity once the order is released from credit check.
    The situation arises as per the below scenarios.
    Scenario - 1 -  When the sales order has two line item - one line item with confirmed qunaity in the schedule line and for the 2nd line item there is no available stock for the Material xxxxxx.
    Initially the sales order is created for the line item 2 with confirmed quantity = 0, and having the delivery block = 01 for the Material xxxxxx  and the order is set with credit check.  Once the order is relased from the credit check.  The quanity for the item 2 where the confirmed quantity will be = 0 ( Where it is not changing the confirmed quantity)
    Scenario -2-  Updating the order qunaity for the line item 2 as (9Pcs) it will goes to credit check and save the order.
    Maintain the stock for the line item 2 ( 5 Pcs).
    Once the order is released from the credit check.  Then  for the line item 2 the confirm quanity will be seting to 5 Pcs with Delivery blcok 01.
    This should not happen, When the credit check is released even though if it has stock based on the delivery blockl it should set the confirmed quanity to Zero.
    Can you please help me how to solve this issue.
    Looking forward for your reply.
    Thanks and Regards,

    Hi,
    I agree with your point.  In the sales order When the complete delivery check box is enabled where the confimed qty is set to zero, it is fine but when we save the orderr it goes to credit check.  Once we release the order using VKM3 where in the sales order the confimed quantity is setting to 5,  But it should set to Zero quantity.  Quatity should not be get confirmed it should be Zero Quantity. 
    Further in SPRO - customizing in the deliveries blocking reasons - It has a tick mark in the confirmation blcok.  But we dont want to remove the - Confirmation Block tick mark
    Please any one can help me if you have any solution to solve this problem.
    Thanks and Regards.

  • Line item split - open item clearing (FB05)

    Hi,
    when clearing open items we need to preserve the line item split in clearing document as it was in cleared items. For example if we have two line items with different assignment (ZUONR) system generates only one line item in the clearing document (where amount is equal to sum of amounts from both cleared items). We need one item per assignment in clearing document. Thanks for any suggestions.
    Regards,
    Michal Majer

    Hi,
    You can always go to the "Analysis" button in the Condition Tab of the Particular Line Item and see what has exactly happenned.
    Now to understand your setting.... Was that Manual Condition Type .. A Header Condition ....In process... Once you enter a value in the Header Level automatically it will be transfered to the Line Items in the document ???
    Regards

  • Mulitple line items with partial delivery in IDOC

    Hi,
    This is the scenario
    I am testing 855 inbound PO confirmation using we19. How can I test with multiple line items for partial delivery. I have created new segment for each line item(E1EDP01). For one line item the scheduled quantity is less than the ordered quantiy.
    Guys Please can u help me on this
    Regards
    Andy

    Enable 'Del Date' in Form Settings of the Delivery.
    In the First Row, select the Item, Qty 5 and type Del Date Immediately
    In the Second Row, select the Same Item, Qty 10 and type Del Date after 10 Days
    In the Thrid Row, select the Same Item, Qty 5 and type Del Date after 15 Days

  • Delete proposed items with billed quantity 0 in VF01

    Hi,
    We need to delete from the proposed items to invoice the items with billed quantity 0. The lines with this quantity = 0 have not to be showed so we need to delete the items just when the items are proposed. Do you know any way to do that? The user exits we have found, like userexit_fill_vbrk_vbrp, are not usefull because are executed before the append is done to the table XVBRP.
    Thank you,
    Manel

    This should be done in COPY CONTROL. Please sit with your functional counterpart to identify which copy control routine is currently being used. Next, in VOFM, copy this routine to a new routine (new routine # should be between 601 to 900) and adjust your new routine per your requirements.
    Raj

  • Can not delete service entry sheet having Items with zero quantity

    Dear Experts ,
    I am having one service entry sheet with many line items out of which some line items are having quantity zero. Now when trying to delete the service entry sheet , system is asking to fill the quantity . since there are already some other service entry sheets through which full quantity equal to Purchase order quantity for that service line item has been already entered , the system is giving message "quantity exceeds"  if even quantity 0.01 is entered for namesake to allow delete of entire SES.
    The user had saved this service entry sheet & left it as it without acceptance for long time , it is required to be deleted as whole.
    Please advise how it can be deleted as system is not allowing it to delete & asks quantity to be filled NOW where  quantity had been entered zero while previously saving .
    Thanks in advance ,
    Regards,
    Anil Shanbhag

    Hi ,
    The SES has all line items with WBS elements , the idea to delete the SES is to free-up the budget which is commited due to creation of this SES.
    I have tried deleting individual line items in SES ,but system gives error "enter quantity" where line item quantity is zero. there are few such line items with quantity zero out of total 26 line items in the SES.
    I want to know whether Blocking of SES at header level will free-up the budget as it is the basis purpose for deleting SES , which i think may not serve the purpose.
    Kindly advise.  Thanks for your inputs.
    Warm Regards,
    Anil

  • How to pull PO line item with "Block" indicator

    Hi all
    In ME2N, how do I pull all the PO line items with the "block" indicator set?
    I couldn't find a field in dynamic selection.
    Thanks in advance!

    HI,
    1. In ME2N -
    >Go to EDIT menu and then select Dynamic Selections (Shift+F4).
    Next select Purchasing Document item and double click on deletion indicator.
    Select the indicator and excute.
    Hope it helps..
    regards

  • PO Release Strategy not changed after deletion of few line items with less

    Subject : PO Release Strategy not changed after deletion of few line items with less Total PO
    Dear Friends
    We have issue with PO Release strategy. We have created the PO. with release strategy  with multiple approvers.  After approval of first approval manager , one of the PO line item got deleted and Total PO value is reduced . The new PO value should have changed the PO release strategy. But it is not changed. Old release strategy only showing in the PO which is wrong. 
    Details of the PO
    PO no 4500000123 with 5 line items Total PO value : 100,000 USD Release strategy : AB
    PO line item 5 deleted. Now total PO value changed to 50,000 USD and the PO release strategy should have been changed to AA but not changed. Still showing PO release strategy AB only.
    Are there any OSS notes available to correct his bug.
    Please let me know if you need more details
    Thanks in Advance
    Thanks
    MVS

    Hi,
    release indicators  change it to 4.It may works. Please explore to all 6 indicators..........
    i.e,
    1-cannot be changed
    2-changable,no new determination of strategy
    3-changable,new release in case of strategy
    4-changable,new release in case of strategy or value change
    5-changable,new release if new strategy/outputted
    6-changable,new release if new strategy or value changed/ outputted......
    And check   Characteristic description and value in Classification  of Release strategies ........
    I hope this will help you. Thanking you.
    Regards,
    Venkat.

Maybe you are looking for