PO Net Price and Gross Price should not bechange once GR happen for the sam

Hi Friends,
For my client they need the below requiremet
As of now my client is able change a PO price(net price & Gross Price) after GR happen for the PO.
I maked the Net price field as Display mode under the below Path
Go to ->spro->mm->purchasing ->Purchse Order->define screen layout at document
level-> Choose NBF->select price and price unit and make it display
and i recieved the GR for the PO.
But still am able to change the Gross Price for the material under the Item Detail-> Condition Tab.
if am changing the Gross price means the same reflecting in netprice also.
So,User should not do any Price level changes in a PO once GR done for that.
Kindly suggest me how i can solve this issue.
How i can remove the option in the Purchase Order?.

Hi,
Standard SAP does not provide any setting to meet your req.
however, you can Use an user exit i.e. when the user is using T.code ME22N or ME29N the system should not allow to change the price if there is follow-on documents in the PO history.
Refer SAP Note- 457511.
OR
Create a variant for field price in ME22N & M329N using T code shd0.
http://wiki.sdn.sap.com/wiki/display/Snippets/TransactionVariant-AStepbyStepGuidefor+Creation
Regards,
Pravin
Avoid Changes in PO price after Gr has been done .

Similar Messages

HT1349 I recently bought an iPhone and my charger is not working. It worked for the first time but now it is now it is not working. Can i get it replaced in India because i bought this phone from US?

I recently bought an iPhone and my charger is not working. It worked for the first time but now it is now it is not working. Can i get it replaced in India because i bought this phone from US?

The warranty is only good in the U.S.
You woulod have to send it to someone in the U.S. They could take it in and if it is defective, then it would be replaced.

During CS5 master collection update, I get the error "There was an error downloading this update. Please quit and try again later." This has been happening for the past few days. Can someone help me getting my updates?

During CS5 master collection update on Windows 7, 64-bit laptop, I get the error "There was an error downloading this update. Please quit and try again later." This has been happening for the past few days. Can someone help me getting my updates?

Since CS5 is from 4+ years before the Cloud, this is not the right forum... but I don't really know a correct forum for that very old product
Have you tried to manually update the individual programs?
All updates start here and select product, read to see if you need to install updates in number order, or if the updates are cumulative for the individual product http://www.adobe.com/downloads/updates/

Music is not syncing on my iPad 4 and iPhone 4. pls help me with a solution for the same. Thanks.!

music is not syncing on my ipad 4 and iphone 4..
Please help me for the same.
Thanks!

De-sync all your music to remove it from the device. Then reset your device: hold down the home button along with the power button until you see the Apple, then let go. Now try re-syncing your music.

I upgraded to Mavericks and its running on my 2010 27" i mac. The Keynote, numbers, pages and mail ups have not changed. Has anyone had the same problem?

I upgraded to mavericks and it seems to be running ok. However, my keynote, pages, numbers and mail still look the same. The update section on the APP store tells me they have been intalled but that is not the case. Has anyone experienced the same issue?

You have to download them from the app store. They should come up under the update option if you already have the iwork apps. They are available for free (thanx apple) if you go to the store after installing Mavericks and select them.
Now don't be thrown off because the link (icon) in the dock is the same. There is a updated icon for each app. I got thrown off because I had purchased ilife before the app store and back then, all would go into a folder (iWork '09). I could launch the old apps from the 09 set even after I installed the new ones from the app store. Some of us find this a godsend as the options on the new apps are lacking some power options.
Download the new apps and just pull the old icons off of the dock and watch them going up in a puff of smoke!

HT5622 I have kids with iPod and iPad. Should I have one apple ID for the family?

I have an iTunes account and an iPhone. I have kids with iPad and iPods. Should I keep the family on a single apple ID?

Yes usse the same ID. However, they will need their own email addresses for FaceTime and Messages
MacMost Now 653: Setting Up Multiple iOS Devices For Messages and FaceTime

I am using iphone 4s and just updated ios6 but my apple map is not working please help me for the same

Dear all,
as i am using i phone 4s in INDIA, today itself i updated my phone to operating system ios6, but my map of phone is not working , so please help for same.Its says "direction could not be found ", when i select the starting point and end point, go to start.
With Regards
Anurag

Friend,
refer to following discussion on the same
Apple maps very disappointing

My password lock cannot be turned off (button is greyed out and does not react) and I cannot set to "simple" password (4 digits) for the same reason (button greyed out)

Today, I got a message from my iphone 4 telling me that my password was expired and that I had to change it.
Now I am forced to enter a 8 character long password and I cannot turn off the password lock (button is greyed out and does not react) and I cannot change to "simple" code.
I am so upset that I am considering throwing the bloody thing to the rubbish bin
Can you help?

Have a work Exchange account on your phone? These policies can be enforced by a profile installed on your phone. There is nothing you can do to change this except delete the Exchange account.

Problem with InDesing hiding and other programs can not be opened on screen at the same time.

I have just installed InDesign on my Mac today. When opened it takes up all the screen and then when I try to open any other programs like a browser, it hides. I would like to make the InDesign window smaller, so I can follow instructions from a website, but the minimize window size buttons are not showing up at all. Any idea how I can fix the InDesing window size and show it along with the browser? Also how to detach it from Finder bar on the top of my screen?

Hi Guys,
Thank you so much for all your help. I was now able to fix it. It was after all the problem with the application frame being Off by dafout. It was showing up, but taking my whole descktop. Now when I followed your advice and checket it on under "Window" , it become much smaller and I am not able to resize it and the buttons to minimize or close it are now showing up (they were invisible before). Thank you so much to all of you who have helped me here.
If I may have one more question, I have enocuntered another problem with using this Trial version of inDesign. When I wanted to access Bridge from the Bridge icon inside the program, I got an message that I need to download it from Creative Clowd. I found it strange since I have Photoshop CS6 and Brigge is part of this program, so I don't want to pay for it via Clowd service.
I was able to open Bridge by just clicking on the program from my software launch screen, so it is now working along InDesign, but I wanted it to be part of the InDesign workspcace, so it would show along the program frame on the right of InDesign window and then could be attached there and moved along with it. In such set up I won't need to move each program frame separatelly when they are in my way while I work. I wonder if it could be fixed and how. Any ideas? I would appreciate very much your reply.

HT2534 I installed the Kobo app and the logo appears on my screen but when I try to activiate it, my password and email address is not recognizied. Is my password the same as my Apple ID password?

I installed the Kobo app on my Ipad mini and the logo appears on my screen b ut when I try to activate it a password is asked for. I entered my Apple ID password. Is this not correct?

No, you need to use the account id and password that you've set up with Kobo, the app is linked to your account with them so that you can download your kobo purchases into it

Legacy Asset Net Book Value is Zero-Want to post Sale of Asset for the same

I have Scenario
We have upload the legacy Assets in Year 2005. One of the Asset Net Book Value is Zero. When we are trying to post Asset Retirement, the for that Asset following is error message received:
"Retirement of Old Assets data not possible (No Existing old Asset Data).
Though in the books the Net book value is Zero, we have received profit on sale of Asset.
How post the profit on Asset & also how to take it from the gross block.
Thanks
Rags

Hi,
the e-message stated, that you must use another transaction type:
so not a transaction type with old asset data like 210.
try / test transaction types : 250-275
pls reward useful answers
thx.
Andreas

Sometimes phone numbers that are on emails and websites show up for a second or two and then are removed. This doens't happen with the same email or website when I use Internet Explorer

On some emails and websites phone numbers appear for a second or two and then disappear. If I reload the email or website, the number again appears for a second or two and then disappears. This doesn't happen when I open that same email or website in Internet Explorer.

Do you have Skype installed, I have seen similar reports about Skype causing this. Skype include a "number highlighting" option, and it may be malfunctioning and hiding the numbers instead of highlighting them. If you have Skype, try turning this feature off - http://blog.calcoastwebdesign.com/2008/11/how-to-disable-number-highlighting.html
If that does not help, try the procedure in the [[troubleshooting extensions and themes]] article, this is likely to be caused by an extension/theme issue.

Firefox update download for my Mac in zip code 96822 just runs and runs without downloading anything. Has been happening for the past month. ???

Over the past month, when Firefox indicates it has an update for me, and to download it, all I get is "connecting" and nothing happens. We live in 96822. This is for a Mac.

If you have problems with updating or with the permissions then easiest is to download the full version and trash the currently installed version to do a clean install of the new version.
Download a new copy of the Firefox program and save the DMG file to the desktop
* Firefox 5.0.x: http://www.mozilla.com/en-US/firefox/all.html
* Trash the current Firefox application to do a clean (re-)install
* Install the new version that you have downloaded
Your profile data is stored elsewhere in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder], so you won't lose your bookmarks and other personal data.

Page with PartialTriggers is not working when it loads for the first time

Hi All,
I am experiencing unexpected behavior when using partial triggers and this recurres every time the page loads and the second time it works fine.
Here is the requirement, The page has a check box, when checked, two text boxes should be disabled. When unchecked the two fields should be enabled.
(The fields are Start Date Time and End Date Time in the code below). I am also handiling the Date Validations on value change listener of Start Date time and have no issues on that.
When I try to enter the dates on page load (The check box - "Process Full Indicator" is not selected), I enter the required fields (PEID, Dates and check the Process IAF and Process SMS check boxes and click on the ProcessRFI Button, the date fields are emptied and nothing happens. When i redo the same thing the second time, it works.
The button invokes a BEPL process.
One of the links suggested that I use the partialTrigger tag in the parent layout, I used in the panelFormLayout and it sill did not reflect.
I am facing the same issue in an other page that is reteriving data from a DB Table. As I notice, both the pages are invoking dataControlls. Not too sure if it is related.
Kindly help.
<af:panelFormLayout id="pfl1"
inlineStyle="font-weight:bold; height:181px;"
>
<af:inputText value="#{bindings.PEID.inputValue}"
label="PEID"
required="#{bindings.PEID.hints.mandatory}"
columns="#{bindings.PEID.hints.displayWidth}"
maximumLength="#{bindings.PEID.hints.precision}"
shortDesc="#{bindings.PEID.hints.tooltip}" id="it1"
inlineStyle="font-weight:bold;">
<f:validator binding="#{bindings.PEID.validator}"/>
</af:inputText>

<af:inputDate value="#{bindings.StartDateTime.inputValue}"
label="Start Date Time"
shortDesc="#{bindings.StartDateTime.hints.tooltip}"
id="id1" inlineStyle="font-weight:bold;"
binding="#{backing_ProcessRFI.input_startDate}"
valueChangeListener="#{backing_ProcessRFI.assignFromDateValue}"
autoSubmit="true"
required="true" immediate="true">
<f:validator binding="#{bindings.StartDateTime.validator}"/>
<af:convertDateTime pattern="#{bindings.StartDateTime.format}" type="both"/>
</af:inputDate>
<af:inputDate value="#{bindings.EndDateTime.inputValue}"
label="End Date Time"
shortDesc="#{bindings.EndDateTime.hints.tooltip}"
id="id2" inlineStyle="font-weight:bold;"
binding="#{backing_ProcessRFI.input_endDate}"
partialTriggers="id1"
required="true"
valueChangeListener="#{backing_ProcessRFI.checkNullStartDateValue}"
autoSubmit="true" immediate="true">
<af:validateDateTimeRange minimum="#{backing_ProcessRFI.dtFromDate}"
hintMinimum="End date should be greater than the Start Date"
/>
<f:validator binding="#{bindings.EndDateTime.validator}"/>
<af:convertDateTime pattern="#{bindings.EndDateTime.format}" type="both"/>
</af:inputDate>
<af:selectBooleanCheckbox value="#{bindings.ProcessIAFIndicator.inputValue}"
label="Process IAF"
required="#{bindings.ProcessIAFIndicator.hints.mandatory}"
shortDesc="#{bindings.ProcessIAFIndicator.hints.tooltip}"
id="it2"
inlineStyle="font-weight:bold;">
<f:validator binding="#{bindings.ProcessIAFIndicator.validator}"/>
</af:selectBooleanCheckbox>
<af:selectBooleanCheckbox value="#{bindings.ProcessSMSIndicator.inputValue}"
label="Process SMS"
required="#{bindings.ProcessSMSIndicator.hints.mandatory}"
shortDesc="#{bindings.ProcessSMSIndicator.hints.tooltip}"
id="it5"
inlineStyle="font-weight:bold;">
<f:validator binding="#{bindings.ProcessSMSIndicator.validator}"/>
</af:selectBooleanCheckbox>
<af:selectBooleanCheckbox value="#{bindings.ProcessFullIndicator.inputValue}"
label="Process Full Indicator"
required="#{bindings.ProcessFullIndicator.hints.mandatory}"
shortDesc="#{bindings.ProcessFullIndicator.hints.tooltip}"
id="it4"
inlineStyle="font-weight:bold;"
binding="#{backing_ProcessRFI.processFullIndicator}"
valueChangeListener="#{backing_ProcessRFI.handleFullIndicator}"
autoSubmit="true">
<f:validator binding="#{bindings.ProcessFullIndicator.validator}"/>
</af:selectBooleanCheckbox>
<af:panelStretchLayout id="psl1" inlineStyle="height:40px;">
<f:facet name="center">
<af:panelGroupLayout layout="horizontal"
xmlns:af="http://xmlns.oracle.com/adf/faces/rich"
id="pgl2">
<af:commandButton actionListener="#{bindings.ProcessRFI.execute}"
text="Process RFI"
disabled="#{!bindings.ProcessRFI.enabled}"
id="cb2"
attributeChangeListener="#{ProcessRFI.processResult}"/>
<af:resetButton text="Clear" id="rb1"/>
<f:facet name="separator">
<af:spacer width="10" height="10" id="s2"/>
</f:facet>
</af:panelGroupLayout>
</f:facet>
</af:panelStretchLayout>
</af:panelFormLayout>

Hi John,
My page is not a part of a task flow. The whole app is an Admin app comprising of multiple individual pages navigated using Menu.
I have tried to run this page individually on my local machine as well as when deployed on the WLS server. The behavior is the same.
Kindly advice,
Thanks,
Ram

Double service entry sheet for the same invoice and same period

Hi,
2 service entry sheets have been made for the same PO with the same period and the same invoice no. And hence by mistake 2 bills have been passed for the same work...
how to avoid this.....
is there any std.setting available while creating service entry sheet.
Plz. help
Navin

If there is sufficient quantity in the PO, this cannot be prevented by the system.
Have the data entry person write the SE Sheet number on the physical copy of the bill so that another person entering it can see that SE Sheet is done.
Hope this helps,
Lakshman

PO Net Price and Gross Price should not bechange once GR happen for the sam

Similar Messages

Maybe you are looking for