PO No. Not Available in T-Code VL06F (List Of outbound deliveries)

Hi Team,
I was checking list of outbound deliveries in T-Code VL06F (List Of outbound deliveries) here.
1. PO no. coming as Sales order no. only so how to bring PO no. from sales order to delivery please Guide.
please find attached doc. here.
2. What are the settings required for this
Thanks
YRHSP

Hi SP,
System will populate Purchase document value either as Sales order number (VBAP-VBELN) or Purchase order number (EKPO-EBELN)
This is standard code put
there is no configuration for this
you have to make code changes specific to your requirement
There is an enhancement point where you can try
FELDAUSWAHL_SONDERREGELN_05 SPOTS ES_SAPMV50A
check with your developer on feasibility of this enhancement
thanks
santosh

Similar Messages

  • Favorites exported from Internet Explorer are not available in Bookmarks drop down list as they should.

    Favorites exported from Internet Explorer are not available in Bookmarks drop down list as they should. Where can I find them?

    You can usually find the imported IE Favorites in a folder ("From Internet Explorer") at the bottom of the Bookmarks Menu folder (Bookmarks > Organize Bookmarks).
    If you can't find them in the "From Internet Explorer" folder then try this:
    Export the favorites in IE to an HTML file (bookmarks.html): File > Import and Export<br />
    Import the HTML file in Firefox 3: Bookmarks > Organize Bookmarks > Import & Backup > Import HTML: From File
    http://kb.mozillazine.org/Import_bookmarks ("Import from another browser" and "Import from file")

  • Why some pages are not available offline in Safari reading list?

    From time to time I experience surprises that some web pages are not available offline in reading list of Safari - link is stored, but content - no.
    I was thinking that I was closing Safari too fast before pages downloaded.
    But I rechecked - I gave safari enough time and it still not downloaded.
    When internet connection is available pages are readable, but not in offline.
    And related to issue:
    Should I open Safari to allow to download page, when I add page to reading list from other applications by selecting "Add to reading list"?

    YEs, it's totally frustrating... I'll never again just go along with an upgrade. After upgrading to IOS8 the reading list feature no longer works.
    I even tried the factory reset, clearing out everything and making my iPad 2 like it was originally. And I didn't restore from backup either, afraid whatever bug it is would come back. I even installed iCab Mobile, and Readability... nothing works!
    I Really, really, regret upgrading. I want my fully functioning IOS7 back!!
    IS there any way to get IOS7 back, 'coz this IOS8 is for the birds?!

  • UIButton tag not available in controller code

    Hi, I have UIButton defined in InterfaceBuild. I assigned Tag (integer?) to the button. It has a IBOutlet in my controller code. But my controller can not retrieve the tag value by using:
    int tag = mybutton.tag;
    It is always 0 no matter what I set in Interface Builder.
    Why?

    I am new to interface builder and I'm not sure how to give each button a separate unique tag in interface builder. I can figure out how to access them in code once there set. This is probably something really simple that I'm missing.

  • AR Aging - FAGLL03 - BP Names not available in Layout Column Fields list

    Hi friends,
    For AR Aging we use FAGLL03 [G/L Account Line Items] for some listed AR GL Accounts with the Baseline Date as the basis to manually age in four periods at the end of Month closing. In the FAGLL03 extract, though BP Number under Vendor Column Name is available, I am wondering how I can get the BP First Name, Last Name and off course active addresses as well which I believe are equally important ingredients of the AR Reports.  To populate the AR Report, I am now trying to use the Vendor BP Number but I am struggling to find a simple BP TCode that can extract me the First and Last name. So appreciate any quick tips on this.
    Whereas we use another TCode ZARAGING specifically for Non-Staff AR GL Accounts of entities like UN Agencies, Governments & Dignitaries. The extract of this report comes with the name and as well calculated arrears days. I am not aware about the SAP technical team as why the Staff Advances AR GL Accounts cannot be tracked with the TCode ZARAGING.
    Shall be grateful for comments and help.
    Regards,
    Javed @ UN RSC, Entebbe

    Hi
    I wonder if you need  a report that display the vendor code and name and address as you mentioned above ..
    you may depend on this report S_ALR_87012082 - Vendor Balances in Local Currency  and add small modifications .. as below
    open T-code S_ALR_87012082 and choose company code and in output control section click on vendor address check box. and then click onm configure bottom as below
    and then in the configuration layout add city and street and region and then save the layout
    Run the report and and the layout name in the configure field as shown in pic 1 and you will have the vendor code and address ..
    Regards
    Mahmoud EL Nady

  • Shockwave installed but not available in the Program Files list

    I have the latest version of this program successfully in my PC (Windows XP) but I can not associate a file extension supposed to be used with this program because the system does not find it and I can not find the access route to it.

    What file(s) do you want to associate with Shockwave Player?
    SW player is a browser add-on, not a standalone player.
    You can test it at http://www.adobe.com/shockwave/welcome/

  • Added Lightroom, not available to download in Cloud list

    Switched my Photoshop CC ($19)  subscription to Photoshop Photography ($9) which includes a Lightroom subscription.  When I go to download link for Lightroom, my Adobe cloud opens up but Lightroom is not listed.

    Hi, you didn't tell us about your system...  Does your computer meet the minimum hardware requirements for LR5?
    http://www.adobe.com/products/photoshop-lightroom/tech-specs.html

  • "LOCAL" not available in the access control list

    trying to enable mac address access control. however i only see timed and radius in the pulldown menu. do i need to reconfigure the base station? connect via ethernet while i set it up? thanks.

    use the "timed" version and set it for unlimited access

  • Purchase Order item - plant not available

    Hi,
    when I'm creating a purchase order the plant (Field name NAME1, Data element MEPO_EWERK) I want to select on the item level is not available. I get a list of plants, but the one I'm looking for is not displayed.
    I guess I have missed some basic configuration?
    Thanks in advance for any input
    Br,
    Lars

    Dear,
    Check your Plant in below transaction code i.e. correctly configured or not:
    Dear,
    Steps for the creation of plant:
    Step 1: Creation of Plant: (T/code- OX10)
    Path:- IMG - Enterprise Structure- Definition- Logistics- General- Define copy, delete, check plant
    and then select (Double Click) on Define plant
    Step 2: Assignment to company code (OX18)
    Path: IMG  Enterprise Structure  Assignment  Logistics general  Assign Plant to Company code
    Step 3: Assign purchasing organization to Plant (OX01)
    Path: IMG  Enterprise Structure  Assignment  Material Management  Assign Purchasing Organization to Plant
    Step 4: Maintain storage location for the new plant: (OX09)
    Path: IMG  Enterprise Structure  Definition  Material Management  Maintain storage location
    Step 5: Define attributes of material type:
    transaction code: OMS2
    Step 6: Activate valuation area (Plant):
    Transaction code: OMWD
    Step 7: Plant setting for excise
    Step 8: Assignment of plant for release strategy
    Step 9: Assignment of business area to palnt (OMJ7)
    Step 10: A/c determination for valuation areas (OMWD)
    Step 11: Maintain Plant Parameter (OMI8)
    Thanks & regards
    Varun Bisaria

  • FBL1N not showing reversal reason codes

    Hi,
    We have made some reversals for AP invoices.  In BKPF table, I can see the reversal reason code in field STGRD.  I can also see the reversal reason code in FB03 document header.
    However, in FBL1N, I do not see anything under reason code column.  Is this the correct field?
    Are there any reports which show the list of reversed documents and the reversal reason codes?
    Thanks.

    Hi,
    Reason code, may be you are checking in FBL3N is(BSEG-RSTGR)
    Reason Code for Payments
        Key which represents a reason for payment differences. The keys can be
        freely defined in the system.
    Reversal reason code field is not available in the hidden fields list.
    In case if you want to add this field, please go to settings--special fields
    There you can add table and field name, this can be done in customizing client and can be transported to PRD client.
    Rgds
    Murali. N

  • WD demo application: "Service not available" although service active

    Hi everyone
    I am new in Web Dynpro and while doing some tutorials I came across WD application DEMO_CONTEXT_PROP (package SWDP_DEMO). I wanted to test it, but I get error page "Service not available" and error code 403 "Forbidden". And if I test the service directly in SICF, I get error message SHTTP009.
    The service itself is active in SICF, as well as the mentioned services in SAP note 1088717. And I can run other WD demo applications (such as DEMO_TABLE) without problems. Only this one is giving me problems.
    The funny thing is that in SICF there are 2 services called DEMO_CONTEXT_PROP! One is greyed out, the other one is active. But even if I right-click on the one that is greyed out, is still says "active"!?
    Any suggestions? Thanks!

    Hello Jan,
    we had this issue some weaks ago. When upgrading a system to EhP3 SAP delivered a new WebDynpro ICF service which had already been delivered earlier in a support package.
    Problem is that the name of the SICF service is not its key. The real key for the service is a generated GUID which is stored in the database. If you create a service and later SAP delivers it or if SAP developed in 2 different release stacks the service may appear dublicated as you have 2 different GUIDs for the service. If the service is there twice the system tries one by chance if you are unlucky it takes the inactive one and you get the 403 error.
    Thanls to Ramp Up status we discussed this directly with development. Unfortunately there is no real cleanup / consolidation function yet. The straight forward solution was renaming one of the services. As you only use a Demo Web Dynpro ICF service any of them will work. Perhaps you have to activate the one which is not renamed (you cannot really choose which you rename as the SICF tree is totally confused by the 2 services).
    If you have this trouble for a production service you need the SAP to tell you which service (which GUID) is the long term supported and rename the other (perhaps you have to rename, rename the other and then rename the first back). If you do not do this you get the same problem with every Support Package which touches the ICF Services again.
    Best Regards
    Roman Weise

  • Jolz: uses a CPU feature which is not available?

    First lines from m000 trace after the header:
    *** 2009-03-30 16:34:30.780
    *** SESSION ID:(1565.8) 2009-03-30 16:34:30.780
    *** CLIENT ID:() 2009-03-30 16:34:30.780
    *** SERVICE NAME:(SYS$BACKGROUND) 2009-03-30 16:34:30.780
    *** MODULE NAME:(MMON_SLAVE) 2009-03-30 16:34:30.780
    *** ACTION NAME:(JAVAVM JIT slave action) 2009-03-30 16:34:30.780
    jolz: Compiled code for java/util/HashMap.<init>; uses a CPU feature which is not available
    jolz: Compiled code for java/util/HashMap.resize; uses a CPU feature which is not available
    jolz: Compiled code for java/util/HashMap.unmaskNull; uses a CPU feature which is not available
    jolz: Compiled code for java/util/HashMap$Entry.getKey; uses a CPU feature which is not available
    the last few entries are:
    jolz: Compiled code for oracle/aurora/zephyr/backend/LiveLIRTemps$EnsureLoserLiveRangeIterator.apply; uses a CPU feature which is not available
    jolz: Compiled code for oracle/aurora/zephyr/backend/LiveLIRTemps$GenBitSetIterator.apply; uses a CPU feature which is not available
    This eventually leads to ORA-07445: [joe_run_vm()+15316] [SIGSEGV] [ADDR:0x24000] [PC:0x33FAB74] [Address not mapped to object] []
    What is causing the "CPU feature which is not available" messages to be reported?
    Thank for any assistance.
    Tracey

    Hi Tracy,
    This typically means that the JIT has persisted compiled code that was built on one set of hardware that may use chipset features that are not available on the hardware at runtime. An example of this might be if the code were originally compiled on a modern x86 chip and makes use of SSE2 instructions, but then is asked to later run on old Pentium hardware without such instructions.
    Regardless, it should not lead to ORA-7445. Can you please file an SR with your exact hardware description as well as tracefiles and also description of your deployment (e.g. wehther this database was migrated from one machine to another, etc...)
    In the meantime, a likely workaround for you would be to connect as SYS and issue:
    TRUNCATE TABLE SYS.JAVA$MC$
    and then restart the instance.
    thanks,
    -Rob
    JVM development

  • Cannot connect to wireless network - Wlan is sometimes not available

    Hi,
    The usual problem I have is that I can see the wireless adaptor but when I go to connect it informs me that the adaptor is not available and to refresh the list.
    I also - when I can get connected - loose the connection after a period of time.
    Any help please
    Thanks
    Boris
    PS I have un-installed config free

    Hi
    As far as I know ConfigFree has no any influence on WLAN functionality because this utility is created for monitoring and not for configuring. When you want to use WLAN connection be sure that WLAN card is properly enabled. If the connection is loosed from time to time try to update WLAN driver.

  • I get nothing but error messages, -"Your IMAP server wants to alert you to the following: 113 that mail is not available" or 364? there are hundreds stacked up.You must give answers to how to fix these when we do "search" add the error code number

    I get nothing but error messages, -
    "Your IMAP server wants to alert you to the following: 113 that mail is not available"  or  the same with:  364? 
    Now there are hundreds stacked up on my desktop.
    I cannot find the answer anywhere. You need to  give answers to how to fix these errors because when I  "search" "error code" or the number there is NOTHING. NOTHING!  Yet you give us these stupid error codes
    then you do not give us ANYTHING on how to fix these. These error codes make me so mad it makes me hate outlook, and hate the developers and hate microsoft.  How in the world can you give us ERROR codes without the explanation of what
    to do or how to fix it. You need to  add each  error code number in your "search" then explain what it is and how to fix it.  I am not a tech. I am a lawyer. I have googled the entire string of error code and nothing is clear.
    So, for the last several years, I get these error codes. Also, there is another error code that won't go away--it is the password error code that asks if I want to store the password. Yes, so I say YES. but it pops back. I am sick of this. This is the reason
    I hate Microsoft and I love google. #1 they respond to error, #2 them try to fix them you do not. I paid the full price to buy the OUtlook 2010, almost $500 just to get outlook, and all I got was error codes. I could not even open it because all I would get
    was that error codes and NO ONE knew how to fix them. WHAT IS YOUR PROBLEM that you cannot fix the stupid error codes that you imbed? PLEASE HELP

    Hi,
    I understand how frustrated you are when facing such an issue, maybe I can provide some suggestions on the problem.
    Based on the description, you should be using an IMAP account setup in Outlook. As for the error message, usually it's caused by a corrupted message on the Server. I suggest you logon the Webmail site, check if sending/receiving emails works well.
    If you find any unusual emails that cannot be read or sent, try deleting them to try again.
    I also suggest you create a new profile to setup the IMAP account:
    http://support.microsoft.com/kb/829918/en-us
    Contact your Email Service Provider to get the correct and latest account settings, since you have been using Outlook for years, some settings may have been changed while you haven't been informed.
    For the steps to setup an account in Outlook 2010, please refer to:
    http://office.microsoft.com/en-001/outlook-help/add-or-remove-an-email-account-HA010354414.aspx
    I hope this helps.
    Regards,
    Melon Chen
    TechNet Community Support

  • "connection not available error code - 4161" what...

    Hi
    I have been trying to upload my workouts to Nokia traker but when I start the application I get the following "connection not available error code - 4161" What does this mean and how do I sort it
    Thanks

    I did a comparison, and your connection string is different
    than mine. Mine does not show any password/userid entries, but
    perhaps that's the difference between using SQL and SQL Express.
    (I'm using SQL.) I am, of course, assuming that you have actual
    values for "servername," "database," etc.
    Given that you can't get in from RSC Explorer, it would seem
    that either you are not using the same userid/password as the one
    you set up for the administrator when you created the DB, or else
    there's something wrong with the DB itself.
    Try creating a test DB. Be careful to specify the same
    administrator name and password as the login you use to get on the
    RSC server. After you've created the test DB, open it up from RSC
    Explorer. If you can do this successfully, then everything ought to
    be working OK. From that point, I'd start over and create a new DB,
    and upload to that one. (In fact, I've actually gone through
    exactly that total exercise before.
    G

Maybe you are looking for